WEIGHTED LEAST SQUARE METHOD FOR S-N CURVE FITTING

An S-N curve fitting approach is proposed based on the weighted least square method, and the weights are inversely proportional to the length of mean confidence intervals of experimental data sets. The assumption coincides with the physical characteristics of the fatigue life scatter. Two examples demonstrate the method. It is shown that the method has better accuracy and reasonableness compared with the usual least square method.

ADAPTIVE FUSION ALGORITHMS BASED ON WEIGHTED LEAST SQUARE METHOD

Weighted fusion algorithms, which can be applied in the area of multi-sensor data fusion, are advanced based on weighted least square method. A weighted fusion algorithm, in which the relationship between weight coefficients and measurement noise is established, is proposed by giving attention to the correlation of measurement noise. Then a simplified weighted fusion algorithm is deduced on the assumption that measurement noise is uncorrelated. In addition, an algorithm, which can adjust the weight coefficients in the simplified algorithm by making estimations of measurement noise from measurements, is presented. It is proved by emulation and experiment that the precision performance of the multi-sensor system based on these algorithms is better than that of the multi-sensor system based on other algorithms.

Data point selection for weighted least square fitting of cavity decay time constant

For the accurate extraction of cavity decay time, a selection of data points is supplemented to the weighted least square method. We derive the expected precision, accuracy and computation cost of this improved method, and examine these performances by simulation. By comparing this method with the nonlinear least square fitting （NLSF） method and the linear regression of the sum （LRS） method in derivations and simulations, we find that this method can achieve the same or even better precision, comparable accuracy, and lower computation cost. We test this method by experimental decay signals. The results are in agreement with the ones obtained from the nonlinear least square fitting method.

WEIGHTED LEAST SQUARE CONVERGENCE OF LAGRANGE INTERPOLATION ON THE UNIT CIRCLE

In the paper, a result of Walsh and Sharma on least square convergence of Lagrange interpolation polynomials based on the n-th roots of unity is extended to Lagrange interpolation on the sets obtained by projecting vertically the zeros of (1-x)2=P (a,β) n(x),a>0,β>0,(1-x)P(a,β) n(x),a>0,β>-1,(1+x)P P(a,β) n(x),a>-1,β0 and P(a,β) n(x),a>-1,β>-1, respectively, onto the unit circle, where P(a,β) n(x),a>-1,β>-1, stands for the n-th Jacobi polynomial. Moreover, a result of Saff and Walsh is also extended.

STUDY ON FREQUENCY ESTIMATION BASED ON WEIGHTED LEAST SQUARE METHOD WITH THREE FOURIER COEFFICIENTS

In this paper,a sinusoidal signal frequency estimation algorithm is proposed by weighted least square method.Based on the idea of Provencher,three biggest Fourier coefficients in the maximum periodogram are considered,the Fourier coefficients can be written as three equations about the amplitude,phase,and frequency,and the frequency is estimated by solving equations.Because of the error of measurement,weighted least square method is used to solve the frequency equation and get the signal frequency.It is shown that the proposed estimator can approach the Cramer-Rao Bound(CRB)with a low Signal-to-Noise Ratio(SNR)threshold and has a higher accuracy.

Novel passive localization algorithm based on weighted restricted total least square

A novel multi-observer passive localization algorithm based on the weighted restricted total least square （WRTLS） is proposed to solve the bearings-only localization problem in the presence of observer position errors. Firstly, the unknown matrix perturbation information is utilized to form the WRTLS problem. Then, the corresponding constrained optimization problem is transformed into an unconstrained one, which is a generalized Rayleigh quotient minimization problem. Thus, the solution can be got through the generalized eigenvalue decomposition and requires no initial state guess process. Simulation results indicate that the proposed algorithm can approach the Cramer-Rao lower bound （CRLB）, and the localization solution is asymptotically unbiased.

Electrical impedance tomography using adaptive mesh refinement

In electrical impedance tomography （EIT）, distribution of the internal resistivity or conductivity of an unknown object is esti- mated using measured boundary voltage data induced by different current patterns with various reconstruction algorithms. The reconstruction algorithms usually employ the Newton-Raphson iteration scheme to visualize the resistivity distribution inside the object. Accuracy of the imaging process depends not only on the algorithm used, but also on the scheme of finite element discretization. In this paper an adaptive mesh refinement is used in a modified reconstruction algorithm for the regularized Err. The method has a major impact on efficient solution of the forward problem as well as on achieving improved image resolution. Computer simulations indicate that the Newton-Raphson reconstruction algorithm for Err using adaptive mesh refinement performs better than the classical Newton-Raphson algorithm in terms of reconstructed image resolution.

PARAMETERIZATION OF TRIANGULAR MESHES

A new algorithm called the weighted least square discrete parameterization (WLSDP) is presented for the parameterization of triangular meshes over a convex planar region. This algorithm is the linear combination of the discrete Conformal mapping(DCM) and the discrete Authalic mapping(DAM). It provides the good properties of both DCM and DAM, such as robustness and low distortion. By adjusting the scaling factor q embedded in the WLSDP, satisfactory parameterizations in different special applications can be achieved.

ON ANALYSIS METHOD FOR INFRARED MULTI-SITES SYSTEM PERFORMANCE

The calculation method about infrared multi-sites passive system location is introduced based on the principle of the weighted least square method, and the variance matrix of estimated error is offered. Through deduction, it can be found out that treated appraise precision can be directly analyzed and deduced without carrying out real measure and reaching estimation value. The simulation result shows that the system performance based on the weighted least square method is much better than the traditional passive location method, and it can be also used for reference to the research of the location algorithm of similar system.

A Value-at-Risk Based Approach for PMU Placement in Distribution Systems

With the application of phasor measurement units(PMU)in the distribution system,it is expected that the performance of the distribution system state estimation can be improved obviously with the PMU measurements into consideration.How to appropriately place the PMUs in the distribution is therefore become an important issue due to the economical consideration.According to the concept of efficient frontier,a value-at-risk based approach is proposed to make optimal placement of PMU taking account of the uncertainty of measure errors,statistical characteristics of the pseudo measurements,and reliability of the measurement instrument.The reasonability and feasibility of the proposed model is illustrated with 12-node system and IEEE-33 node system.Simulation results indicated that uncertainties of measurement error and instrument fault result in more PMU to be installed,and measurement uncertainty is the main affect factor unless the fault rate of PMU is quite high.

Two Phase Flow Simulation of Fractal Oil Reservoir Based on Meshless Method

The reservoir is the networked rock skeleton of an oil and gas trap,as well as the generic term for the fluid contained within pore fractures and karst caves.Heterogeneity and a complex internal pore structure characterize the reservoir rock.By introducing the fractal permeability formula,this paper establishes a fractal mathematical model of oil-water two-phase flow in an oil reservoir with heterogeneity characteristics and numerically solves the mathematical model using the weighted least squares meshless method.Additionally,the method’s correctness is verified by comparison to the exact solution.The numerical results demonstrate that the fractal oil-water two-phase flow mathematical model developed using the meshless method is capable of more accurately and efficiently describing the flow characteristics of the oil-water two-phase migration process.In comparison to the conventional numerical model,this method achieves a greater degree of convergence and stability.This paper examines the effect of varying the initial viscosity of the oil,the initial formation pressure,and the production and injection ratios on daily oil production per well,water cut in the block,and accumulated oil in the block.For 10 and 60 cp initial crude oil viscosities,the water cut can be 0.62 and 0.80,with 3100 and 1900 m^(3)cumulative oil production.Initial pressures have little effect on production.In this case,the daily oil production of well PRO1 is 1.7 m^(3)at 7 and 10 MPa initial pressure.Block cumulative oil production is 3465.4 and 2149.9m^(3)when the production injection ratio is 1.4 and 0.8.The two-phase meshless method described in this paper is essential for a rational and effective study of production dynamics patterns in complex reservoirs and the development of reservoir simulations of oil-water flow in heterogeneous reservoirs.

Review of Trends in State Estimation of Power Distribution Networks

Distribution network state estimation provided complete and reliable information for the distribution management system (DMS) and was a prerequisite for other advanced management and control applications in the power distribution network. This paper first introduced the basic principles of the state estimation algorithm and sorted out the research status of the distribution network state estimation from least squares, gross error resistance etc. Finally, this paper summarized the key problems faced by the high-dimensional multi-power flow active distribution network state estimation and discussed prospects for future research hotspots and developments.

Adaptive predictive functional control based on Takagi-Sugeno model and its application to pH process

In order to obtain accurate prediction model and compensate for the influence of model mismatch on the control performance of the system and avoid solving nonlinear programming problem,an adaptive fuzzy predictive functional control(AFPFC) scheme for multivariable nonlinear systems was proposed.Firstly,multivariable nonlinear systems were described based on Takagi-Sugeno(T-S) fuzzy models;assuming that the antecedent parameters of T-S models were kept,the consequent parameters were identified on-line by using the weighted recursive least square(WRLS) method.Secondly,the identified T-S models were linearized to be time-varying state space model at each sampling instant.Finally,by using linear predictive control technique the analysis solution of the optimal control law of AFPFC was established.The application results for pH neutralization process show that the absolute error between the identified T-S model output and the process output is smaller than 0.015;the tracking ability of the proposed AFPFC is superior to that of non-AFPFC(NAFPFC) for pH process without disturbances,the overshoot of the effluent pH value of AFPFC with disturbances is decreased by 50% compared with that of NAFPFC;when the process parameters of AFPFC vary with time the integrated absolute error(IAE) performance index still retains to be less than 200 compared with that of NAFPFC.

Parameter Estimation for the NEAR(p) Model

As to the acronym NEAR（p）, it means “New Exponential Autoregressive Process of order p”. The NEAR（p） model is defined by

Residual stress analysis of multi-pass cold spinning process

Uncontrolled residual stresses have significant effects on the service time and defects of the spun parts.Nowadays,X-Ray Diffraction(XRD)method has been widely used in the residual stress measurement of industry products with different forming processes.The calculated residual stress is usually obtained from the data fitting slope of strain and angle with Ordinary Least Squares(OLS)method.But this fitting method is not always suitable for the big fluctuant data.In this paper,the Weighted Least Square(WLS)method is used for the data fitting and compared with the OLS method.The nickel-based superalloy GH3030 and iron-based superalloy GH1140 are applied in the multi-pass cold spinning experiments.The residual stress distributions of normal,potential crack and wrinkle workpieces are discussed with the grain structure.The results show that WLS method has better goodness of fit compared with OLS method.The residual stress distributions have special relationship with potential crack,wrinkle workpiece and grain structure.

Analytic design of information granulation-based fuzzy radial basis function neural networks with the aid of multiobjective particle swarm optimization

Purpose–The purpose of this paper is to consider the concept of Fuzzy Radial Basis Function Neural Networks with Information Granulation(IG-FRBFNN)and their optimization realized by means of the Multiobjective Particle Swarm Optimization(MOPSO).Design/methodology/approach–In fuzzy modeling,complexity,interpretability(or simplicity)as well as accuracy of the obtained model are essential design criteria.Since the performance of the IG-RBFNN model is directly affected by some parameters,such as the fuzzification coefficient used in the FCM,the number of rules and the orders of the polynomials in the consequent parts of the rules,the authors carry out both structural as well as parametric optimization of the network.A multi-objective Particle Swarm Optimization using Crowding Distance(MOPSO-CD)as well as O/WLS learning-based optimization are exploited to carry out the structural and parametric optimization of the model,respectively,while the optimization is of multiobjective character as it is aimed at the simultaneous minimization of complexity and maximization of accuracy.Findings–The performance of the proposed model is illustrated with the aid of three examples.The proposed optimization method leads to an accurate and highly interpretable fuzzy model.Originality/value–A MOPSO-CD as well as O/WLS learning-based optimization are exploited,respectively,to carry out the structural and parametric optimization of the model.As a result,the proposed methodology is interesting for designing an accurate and highly interpretable fuzzy model.

Statistical inference for multivariate longitudinal data with irregular auto-correlated error process

Multivariate longitudinal data arise frequently in a variety of applications,where multiple outcomes are measured repeatedly from the same subject.In this paper,we first propose a two-stage weighted least square estimation procedure for the regression coefficients when the random error follows an irregular autoregressive(AR)process,and establish asymptotic normality properties for the resulting estimators.We then apply the smoothly clipped absolute deviation(SCAD)variable selection approach to determine the order of the AR error process.We further propose a test statistic to check whether multiple responses are correlated at the same observation time,and derive the asymptotic distribution of the proposed test statistic.Several simulated examples and real data analysis are presented to illustrate the finite-sample performance of the proposed method.