Temperature field calculation of rail flash welding

The forging stage of rail flash welding has a decisive influence on joint strength,and the study of the temperature distribution in the process has an important role in further improving joint strength.In this paper,three calculation methods for the temperature field are given.First,the finite element model of the temperature field before forging rail flash welding is established by using the transient heat module of Ansys software and verified by infrared temperature measurement.Second,the temperature distribution of different parts of the rail before flash welding is obtained by using infrared thermal imaging equipment.Third,Matlab software is used to calculate the temperature of the non-measured part.Finally,the temperature distribution function along the rail axis is fitted through the temperature measurement data.The temperature distribution before the top forging of the rail flash welding can be used to analyze the joint and heat-affected zone organization and properties effectively and to guide the parameter setting and industrial production.

Real-time measurement of welding temperature field and closed loop control of penetration

Colormetric method of images by using two different wavelength images is a new measuring method for welding temperature field on the basis of ordinary colorimetric method, which depends little on the measuring distance, emissivity of body etc. In this paper the real time measuring system and measuring principle of welding temperature field are described, the whole welding temperature field is real time measured, so the temperature distribution at the welding direction and its cross section is obtained, then parameters of thermal cycle. With data from the temperature closed loop control system of the parameters of temperature field is developed and tested. Experimental results prove that it has high measurement speed (time of a field within 0.5 s ) and good dynamic response quality. Weld penetration can be controlled satisfactorily under the variation of welding condition such as welding thickness, welding speed and weldment gap etc.

THE COUPLED FEM ANALYSIS OF THE TRANSIENT TEMPERATURE FIELD DURING INERTIA FRICTION WELDING OF GH4169 ALLOY

The inertia friction welding process is a non-linear process because of the interaction between the temperature field and the material properties as well as the friction force. A thermo-mechanical coupled finite element model is established to simulate the temperature field of this process. The transient temperature distribution during the inertia friction welding process of two similar workpieces of GH4169 alloy is calculated. The region of the circular cross-section of the workpiece is divided into a number of four-nodded isoparametric elements. In this model, the temperature dependent thermal properties, time dependent heat inputs, contact condition of welding interface, and deformation of the flash were considered. At the same time, the convection and radiation heat losses at the surface of the workpieces were also considered. A temperature data acquisition system was developed. The temperature at some position near the welding interface was measured using this system. The calculated temperature agrees well with the experimental data. The deformation of the flash and the factor affecting the temperature distribution at the welding interface are also discussed.

Numerical simulation of temperature fields for T-joint during TIG welding of titanium alloy

Three-dimensional finite element model was established to simulate temperature fields of T-joint titanium sheets during TIG welding with finite element method （FEM） software. Temperature dependent material properties and the effect of latent heat were considered. A technique of element birth and death was used to simulate the process of welded metal filling. Dynamic variation process of temperature fields during T1G welding was achieved. The simulated results agreed well with the measured results.

Numerical simulation on temperature field for resistance spot welding of non-equal thickness stainless steel

An axisymmetric finite element model is developed to simulate the temperature field of resistant spot welding according to the process characters of nugget formation of non equal stainless steel sheets. A simulation method of the interaction of electrical and thermal factors is presented. The spot welding process of nugget formation is simulated using hard and soft welding technique norms. The heating characters of soft and hard norms determine the differences in the process of nugget formation and determine the finally shape and offset of nugget. Experimental verification shows that the model prediction agrees well with the practical.

Three dimensional numerical simulation of welding temperature fields in stainless steel

Three kinds of mathematical models representing welding heat sources are presented. Among them, Gaussian model and double ellipsoidal model are used to analyze the thermal distributions with finite element method. At the same time, this paper analyzed the influences of the heat source models, the latent heat and the welding parameters on the temperature distributions. The comparisons between the simulated results and the experiments show double ellipsoidal model is good for three-dimensional numerical simulations. Furthermore, the adaptive mesh technique is applied in the three-dimensional model which greatly reduces the number of nodes and elements in the simulation.

Influence of welding parameters on temperature field characteristics during laser welding of TA15 by infrared thermography

Using an infrared thermographic technique, the temperature field during laser welding of TA15 is quantitatively measured and investigated. The ilffluenee of two welding parameters on the weld temperature distribution is analyzed and the meehanisnl is discussed. New conclusions are drawn that are different from conventional weld temperature distributions. For the face of the weld, changes in welding speed induce changes in the temperature distribution because of different heat inputs and the cooling effect. Sinfilar temperature features in the welds are observed for all speeds, which exhibit a relatively low temperature area below 1 500 ℃ between the high temperature area in the position of laser incidence and the sub-high temperature area at the end of the molten pool. For the ilffluenee of laser power on the face of the weld, the temperature on the weld is higher for P = 2.8 kW compared to P = 2.0 kW, especially the temperature in the sub-high temperature area. However, for the temperature field of the back of the weld, the ilffluenee of welding speeds is quite different compared to the results for the face of the weld. The highest temperature does not locate in the keyhole area, but instead in the middle of the molten pool. And there are different temperature features at different speeds. When v = 6 m/min, the temperature field is like a uniform color belt and the temperature along the center of the weld fluctuates between 300 and 450 ℃. When v = 4 m/rain, the transient temperature distribution is not uniform and is unstable at different times. However, for v = 2.4 m/rain and lower speeds, the temperature field becomes stable. The ilffluenee of laser power on the back of the weld temperature field is more complex. The measured temperature does not increase with increasing laser power, which seems to eolffliet with the conventional thermal conduction theory-. This may be related with the characteristics of the keyhole area.

Calculation of temperature field near stagnation point in explosive welding

Energy deposition at the interface of explosive welding is analyzed by symmetrical impaction model of uneompressible liquid. Equation of energy in the flow field of explosive welding is deduced and the distribution of temperature in the flow field is solved by finite difference method on the basis that the adiabatic compression is considered. The results show that the temperature rise increases with the increasing of the velocity of approaching flow and impact angle, under appropriate velocity of approaching flow and impact angle the temperature rise near the welding interface will be higher than the melting point of the material and the thin melted layer is localized on the region near welding interface.

Modelling of the plasma-MIG welding temperature field

A three-dimensional simulation model for the plasma-MIG welding process, which takes the interaction between the plasma arc and MIG arc into account, is presented and the quasi-steady temperature fields on the workpiece are calculated with the model. The 10 mm-5A06 aluminum alloy is welded and the temperature fields are measured with the thermoelectric couple. The simulation results and measured results show that the biggest deviation of peak temperature between them is below 20 ℃, which indicates good coincidence between the simulation and measurement.

NUMERICAL SIMULATION OF TEMPERATURE FIELD ON FLASH BUTT WELDING FOR HIGH MANGANESE STEELS

An axial symmetry finite element model coupled with electricity-thermal effect was developed to study the temperature field distribution in process of the flash butt welding （FBW） of frog highmanganese steel. The influence of temperature dependent material properties and the contact resistance were taken into account in FEM ＇simulation. Meanwhile, the lost materials due to .splutter was resolved by using birth and death element. The result of analyzing data shows that the moddel in the FBW flashing is reasonable and feasible, and can exactly simulate the temperature field distribution. The modeling provides reference for analysis of welding technologies on the temperature field of high-manganese steel in FBW.

Finite element simulation of three-dimensional temperature field in underwater welding

Mathematical models of three-dimensional temperature fields in underwater welding with moving heat sources are built. Double ellipsoid Gauss model is proposed as heat sources models. Several factors which affect the temperature fields of underwater welding are analyzed. Water has little influence on thermal efftciency. Water convection coefftcient varies with the temperature difference between the water and the workpiece , and water convection makes molten pool freeze quickly. With the increase of water depth, the dimensions of heat sources model should be reduced as arc shrinks. Finite element technology is used to solve mathematical models. ANSYS software is used as finite element tool, and ANSYS Parametric Design Language is used to develop subprograms for loading the moving heat sources and the various convection coefftcients. Experiment results show that computational results by using double ellipsoid Gauss heat sources model accord well with the experimental results.

Artificial-neural-network-based storage method for three-dimensional temperature field data during friction stir welding

In this paper,a new storage method for the three-dimensional temperature field data based on artificial neural network(ANN)was proposed.A multilayer perceptron that takes the coordinate(x,y,z)as inputs and temperature T as output,is used to fit the three-dimension-al welding temperature field.Effect of number of ANN layers and number of neurons on the fitting errors is investigated.It is found that the errors decrease with the number of hidden layers and neural numbers per layers generally.When the number of hidden layers increases from 1 to 6,the maximum temperature error decreases from 74.74℃to less than 2℃.The three-dimensional temperature field data is obtained by finite element simulation,and the experimental verification is completed by comparing the simulation peak temperatures with the measured results.As an example,an ANN with 4 hidden layers and 12 neurons in each layer were applied to test the performance of the proposed method in storage of the three-dimensional temperature field data during friction stir welding.It is found that the average error between the temperature data stored in ANN and the original simulation data that stored point-by-point is 0.517℃,and the error on the maximum temper-ature is 0.193℃,while the occupied disk space is only 0.27%of that is required in the conventional point-by-point storage.

Semi-analytic Solution of Steady Temperature Fields During Thin Plate Welding

Usually, it is very difficult to find out an analytical solution to thermal conduction problems during high temperature welding. Therefore, as an important numerical approach, the method of lines （MOLs） is introduced to solve the temperature field characterized by high gradients. The basic idea of the method is to semi-discretize the governing equation of the problem into a system of ordinary differential equations （ODEs） defined on discrete lines by means of the finite difference method, by which the thermal boundary condition with high gradients are directly embodied in formulation. Thus the temperature field can be obtained by solving the ODEs. As a numerical example, the variation of an axisymmetrical temperature field along the plate thickness can be obtained.

Effect of arc distance on temperature field and weld shape during double-sided arc welding

A new high efficiency welding method, double-sided double arc welding with double powers （DSAW-D）, is developed for thick plate of low alloy high strength steel in this study. It is well known that the thermal cycles have an important influence on the microstructure, shape, stress, distortion and mechanical property. The DSA W-D method can control the temperature field on a wide range by regulating the distance between two arcs, improve the microstructure and prevent hot and cold cracking of high strength steel. But at present, the effect of arc distance on the temperature field and shape is not clear. Therefore, the paper researches the effect of arc distance on the temperature field and weld pool during DSAW-D using finite element method. The transient temperature field of different arc distance in DSAW-D is calculated. To verify the numerical results, the temperature is measured by the thermo-couple and the calculated results agree approximately with experimental data. Farther, the thermal property and mutual effect of double-sided arcs are investigated. The temperature distributions and weld pool profile at different arc distances are obtained. The results show that arc distance is a very important factor to affect the heat process.

Welding temperature field analysis for featheredged cylinder based upon conformal transformation

The accurate calculation and measurement of welding temperature field is an important precondition for welding metallurgical analysis and welding process controlling. In this paper, the conformal transformation is firstly used to analyze the welding temperature field of featheredged cylinder. The center of the cylinder is chosen as the origin of column coordinate system, and every point may be expressed as complex field vector. The branch isogonality counterchanges the line parallel with the fusion line in half-infinite z-plane to the circle concentric with the fusion line in infinite cylinder. The Laplace equation and Poisson＇s equation still keep validity, so the temperature field equation can be solved. The conformal transformation and equation solution is processed by Matlab program language. It shows that the obtained analytical modeling of temperature field for featheredged cylinder based on conformal transformation is effective and accurate.

Finite element analysis on temperature field and residual stress of welding assembly for I-beam and end-plate

Based on full scale model of 1-beam and end-plate welding assembly with medium plate, welding temperature field and residual stress were simulated, infrared thermometers were employed to measure the real-time temperature Jbr verification purposes. Results show that the measured thermal cycle curves match well with the simulation result. Simulation results of welding residual stress indicate that the values of longitudinal and transverse stress on the upper surface of the plate are higher than the normal stress; higher tensile stresses exist at the end of the web weld toes and in the central area of the flange weld toes. The dangerous zones are located at the central areas of weld toes of the flange welds and near weld toes of the web welds.

Numerical simulation of 80 ℃ temperature field distribution of thick plate multi-pass welding with SYSWELD

The PPG PITT-CHAR XP flame retardant system has been used by COOEC to preventing the thermal softening of steel in the high temperature,whose degradation temperature is 80 ℃.To prevent damage to PPG PITT-CHAR XP fire retardant paint from excessive heat during welding,it is necessary to get accurately reserved area near the welding joints prior to welding. For the foregoing reasons,the 80 ℃ temperature field distribution of thick plate multi-pass welding was analyzed with SYSWELD.The influence of welding groove form and time interval on welding temperature field was also analyzed. Results showed that the range of 80 ℃ welding temperature field increased with the increasing of weld layers at first and then it inclined to stable value. Interpass time setting was crucial to control the range of 80 ℃ welding temperature field. It was also found that double V groove had better thermal diffusivity than double-bevel groove.And double-bevel groove was better than single V groove.

Temperature field simulation of laser-TIG hybrid welding

The three dimensional transient temperature distribution of laser TIG hybrid welding was analyzed and simulated numerically. Calculations were based on a finite element model, in which the physical process of hybrid welding was studied and the coupling effect of the laser and arc in the hybrid process was fully considered. The temperature fields and weld cross sections of the typical welding parameters are obtained using present model. The calculation results show that the model can indicate the relationship of energy match between laser and arc to joints cross sections objectively, and the simulation results are well agreed with the experimental results.

Numerical simulation of gas metal arc welding temperature field

The infrared camera is used to investigate the temperature field of gas metal arc welding. The results show that the temperature distribution of weld pool and adjacent area appears cone shape. A new heat source model combined by Gaussian distribution heat source of the arc and conical distribution heat source of the droplet is set up based on the experimental results, and with the combined boundary conditions, the temperature field of gas metal arc welding is simulated using finite element method. According to the comparison between the results of experiment and simulation in temperature field shows that the new combined heat source model is more accurate and effective than the Gauss heat source model.

Analytical Model of Temperature Field in Unsteady Stage of Friction Plug Welding

The temperature field in unsteady phase greatly affects the quality of friction plug welding(FPW).An analytical model is put forward to correlate the process parameters and the temperature field in unsteady phase of FPW.Applying the von Mises criterion for plastic deformation and linearizing the heat flux,the model is achieved by Laplace transformation.The predicated peak temperature and peak time agree with the experiment data,with errors of about 4%and 8%,of AA7075-T6 FPW.