Entropy of deterministic trajectory via trajectories ensemble

We present a formulation of the single-trajectory entropy using the trajectories ensemble. The single-trajectory entropy is affected by its surrounding trajectories via the distribution function. The single-trajectory entropies are studied in two typical potentials, i.e., harmonic potential and double-well potential, and in viscous environment by interacting trajectory method. The results of the trajectory methods are in agreement well with the numerical methods(Monte Carlo simulation and difference equation). The single-trajectory entropies increasing(decreasing) could be caused by absorption(emission) heat from(to) the thermal environment. Also, some interesting trajectories, which correspond to the rare evens in the processes, are demonstrated.

A Novel Anti-Collision Algorithm for Large Scale of UHF RFID Tags Access Systems

When the radio frequency identification(RFID)system inventories multiple tags,the recognition rate will be seriously affected due to collisions.Based on the existing dynamic frame slotted Aloha(DFSA)algorithm,a sub-frame observation and cyclic redundancy check(CRC)grouping combined dynamic framed slotted Aloha(SUBF-CGDFSA)algorithm is proposed.The algorithm combines the precise estimation method of the quantity of large-scale tags,the large-scale tags grouping mechanism based on CRC pseudo-randomcharacteristics,and the Aloha anti-collision optimization mechanism based on sub-frame observation.By grouping tags and sequentially identifying themwithin subframes,it accurately estimates the number of remaining tags and optimizes frame length accordingly to improve efficiency in large-scale RFID systems.Simulation outcomes demonstrate that this proposed algorithmcan effectively break through the system throughput bottleneck of 36.8%,which is up to 30%higher than the existing DFSA standard scheme,and has more significant advantages,which is suitable for application in largescale RFID tags scenarios.

High-precision trajectory tracking control of helicopter based on ant colony optimization-slime mould algorithm

To achieve high-precision trajectory following during helicopter maneuver tasks and reduce the disruptive influences of unknown variabilities,this study introduces a cascaded-loop helicopter trajectory tracking controller,whose parameters are set using an Ant Colony OptimizationSlime Mould Algorithm(ACO-SMA).Initially,a nonlinear flight dynamics model of the helicopter is constructed.Observer gain functions and nonlinear feedback from a vibrational suppression function to improve the tracking performance of the controller,addressing issues in disturbance estimation and compensation of the Active Disturbance Rejection Control(ADRC).Simultaneously,a cascaded loop system,comprising an internal attitude loop and an external position loop,is created,and the ant colony-slime mold hybrid algorithm optimizes the system parameters of the trajectory tracking controller.Finally,helicopter trajectory tracking simulation experiments are conducted,including spiral ascending and“8”shape climbing maneuvers.The findings indicate that the ADRC employed for helicopter trajectory tracking exhibits outstanding performance in rejecting disturbances caused by gusts and accurately tracking trajectories.The trajectory tracking controller,whose parameters are optimized by the ACO-SMA,shows higher tracking precision compared to the conventional PID and ADRC,thereby substantially improving the precision of maneuver tasks.

Safe flight corridor constrained sequential convex programming for efficient trajectory generation of fixed-wing UAVs

Generating dynamically feasible trajectory for fixed-wing Unmanned Aerial Vehicles(UAVs)in dense obstacle environments remains computationally intractable.This paper proposes a Safe Flight Corridor constrained Sequential Convex Programming(SFC-SCP)to improve the computation efficiency and reliability of trajectory generation.SFC-SCP combines the front-end convex polyhedron SFC construction and back-end SCP-based trajectory optimization.A Sparse A^(*)Search(SAS)driven SFC construction method is designed to efficiently generate polyhedron SFC according to the geometric relation among obstacles and collision-free waypoints.Via transforming the nonconvex obstacle-avoidance constraints to linear inequality constraints,SFC can mitigate infeasibility of trajectory planning and reduce computation complexity.Then,SCP casts the nonlinear trajectory optimization subject to SFC into convex programming subproblems to decrease the problem complexity.In addition,a convex optimizer based on interior point method is customized,where the search direction is calculated via successive elimination to further improve efficiency.Simulation experiments on dense obstacle scenarios show that SFC-SCP can generate dynamically feasible safe trajectory rapidly.Comparative studies with state-of-the-art SCP-based methods demonstrate the efficiency and reliability merits of SFC-SCP.Besides,the customized convex optimizer outperforms off-the-shelf optimizers in terms of computation time.

An Adaptive Tag Anti-Collision Protocol in RFID Wireless Systems

A novel anti-collision algorithm in RFID wireless network is proposed.As it is put forward on the basis of collision tree(CT)and improved collision tree(lCT) anti-collision protocols,we call it adaptive collision tree protocol(ACT).The main novelty of this paper is that the AD strategy is introduced and used in ACT to decrease collisions and improve the tag system throughput.AD strategy means that query strings will divide into two or four branches adaptively according to the label quantity.This scheme can decrease both depth of query and collision timeslots,and avoid producing too much idle timeslots at the same time.Both theoretical analysis and simulation results indicate that the novel proposed anticollision protocol ACT outperforms the previous CT and ICT protocols in term of time complexity,system throughput,and communication complexity.

Design of Anti-Collision Integrated Security Mechanism Based on Chaotic Sequence in UHF RFID System

Collision and security issues are considered as barriers to RFID applications.In this paper,a parallelizable anti-collision based on chaotic sequence combined dynamic frame slotted aloha to build a high-efficiency RFID system is proposed.In the tags parallelizable identification,we design a Discrete Markov process to analyze the success identification rate.Then a mutual authentication security protocol merging chaotic anti-collision is presented.The theoretical analysis and simulation results show that the proposed identification scheme has less than 45.1%of the identification time slots compared with the OVSF-system when the length of the chaos sequence is 31.The success identification rate of the proposed chaotic anti-collision can achieve 63%when the number of the tag is100.We test the energy consumption of the presented authentication protocol,which can simultaneously solve the anti-collision and security of the UHF RFID system.

A Physical Layer Algorithm for Estimation of Number of Tags in UHF RFID Anti-Collision Design

A priori knowledge of the number of tags is crucial for anti-collision protocols in slotted UHF RFID systems.The number of tags is used to decide optimal frame length in dynamic frame slotted ALOHA(DFSA)and to adjust access probability in random access protocols.Conventional researches estimate the number of tags in MAC layer based on statistics of empty slots,collided slots and successful slots.Usually,a collision detection algorithm is employed to determine types of time slots.Only three types are distinguished because of lack of ability to detect the number of tags in single time slot.In this paper,a physical layer algorithm is proposed to detect the number of tags in a collided slot.Mean shift algorithm is utilized,and some properties of backscatter signals are investigated.Simulation results verify the effectiveness of the proposed solution in terms of low estimation error with a high SNR range,outperforming the existing MAC layer approaches.

A Novel Time-aware Frame Adjustment Strategy for RFID Anti-collision

Recently,object identification with radio frequency identification(RFID)technology is becoming increasingly popular.Identification time is a key performance metric to evaluate the RFID system.The present paper analyzes the deficiencies of the state-of-the-arts algorithms and proposes a novel sub-frame-based algorithm with adaptive frame breaking policy to lower the tag identification time for EPC global C1 Gen2 UHF RFID standard.Through the observation of slot statistics in a sub-frame,the reader estimates the tag quantity and efficiently calculates an optimal frame size to fit the unread tags.Only when the expected average identification time in the calculated frame size is less than that in the previous frame size,the reader starts the new frame.Moreover,the estimation of the proposed algorithm is implemented by the look-up tables,which allows dramatically reduction in the computational complexity.Simulation results show noticeable throughput and time efficiency improvements of the proposed solution over the existing approaches.

An Improved Binary Search Anti-Collision Protocol for RFID Tag Identification

Radio frequency identification(RFID)has been widespread used in massive items tagged domains.However,tag collision increases both time and energy consumption of RFID network.Tag collision can seriously affect the success of tag identification.An efficient anti-collision protocol is very crucially in RFID system.In this paper,an improved binary search anti-collision protocol namely BRTP is proposed to cope with the tag collision concern,which introduces a Bi-response mechanism.In Bi-response mechanism,two groups of tags allowed to reply to the reader in the same slot.According to Bi-response mechanism,the BRTP strengthens the tag identification of RFID network by reducing the total number of queries and exchanged messages between the reader and tags.Both theoretical analysis and numerical results verify the effectiveness of the proposed BRTP in various performance metrics including the number of total slots,system efficiency,communication complexity and total identification time.The BRTP is suitable to be applied in passive RFID systems.

Research on the adaptive hybrid search tree anti-collision algorithm in RFID system

Due to more tag-collisions result in failed transmissions,tag anti-collision is a very vital issue in the radio frequency identification(RFID) system.However,so far decreases in communication time and increases in throughput are very limited.In order to solve these problems,this paper presents a novel tag anti-collision scheme,namely adaptive hybrid search tree(AHST),by combining two algorithms of the adaptive binary-tree disassembly(ABD) and the combination query tree(CQT),in which ABD has superior tag identification velocity and CQT has optimum performance in system throughput and search timeslots.From the theoretical analysis and numerical simulations,the proposed algorithm can colligate the advantages of above algorithms,improve the system throughput and reduce the searching timeslots dramatically.

Performance Analysis of RFID Framed Slotted Aloha Anti-Collision Protocol

In this paper, we develop a novel mathematical model to estimate the probability distribution function of the number of tags discovered after a certain number of interrogation rounds. In addition, the pdfs of the number of rounds needed to discover all the tags are also calculated. The estimation of such pdfs will be helpful in estimating the number of interrogation rounds and the optimal parameter configuration of the RFID system which in turn will be helpful in estimating the time needed to discover all tags. Our results show that the proposed model accurately predicts the tags detection probability. We then use the proposed model to optimally configure the reader parameters (i.e. the frame size and the number of interrogation rounds).

Identifying Anomaly Aircraft Trajectories in Terminal Areas Based on Deep Autoencoder and Its Application in Trajectory Clustering

Anomalous trajectory detection and traffic flow classification for complicated airspace are of vital importance to safety and efficiency analysis.Some researchers employed density-based unsupervised machine learning method to exploit these trajectories related to air traffic control(ATC)actions.However,the quality of position data and the tiny density difference between traffic flows in the terminal area make it particularly challenging.To alleviate these two challenges,this paper proposes a novel framework which combines robust deep auto-encoder(RDAE)model and density peak(DP)clustering algorithm.Specifically,the RDAE model is utilized to reconstruct denoising trajectory and identify anomaly trajectories in the terminal area by two different regularizations.Then,the nonlinear components captured by the encoder of RDAE are input in the DP algorithm to classify the global traffic flows.An experiment on a terminal airspace at Guangzhou Baiyun Airport(ZGGG)with anomaly label shows that the proposed combination can automatically capture non-conventional spatiotemporal traffic patterns in the aircraft movement.The superiority of RDAE and combination are also demonstrated by visualizing and quantitatively evaluating the experimental results.

Distance-Measuring Technology Using LD for Auto Anti-Collision

Auto anti-collision technology is one of the main research subjects of automobiles’ safety technology. Aiming at the key technology of Auto anti-collision, measuring the distance from obstacles, based on the theory of phase laser distance ranging, Laser Diode (LD) distance-measuring system for auto anti-collision has been developed to solve the problem of on-line measuring distance technology in middle to long distance utilizing the good characteristics of LD when modulating its optical intensity and adopting typical kinds of filter techniques in this paper. By theoretical analysis, adopting typical kinds of filter techniques can reduce the interference of strong light, so distance-measuring range can be 0.5–100 m in daytime or 1–200 m at night. And more, from theoretical analysis and experiment result, it can guarantee the high measuring resolution which can be less than 24.5 mm, utilizing the method of two Laser Diode optical intensity modulating wavelength and complimenting precise calibration and revision. The idea of LD distance-measuring technology is novel and feasible and this technology can be applied in Auto anti-collision. Key words laser diode - phase laser distance ranging - filter techniques - auto anti-collision CLC number TH 161 Foundation item: Supported by the National Natural Science Foundation of China (59675080, 59805006) and Wuhan Chenguang Foundation (20025001001)Biography: Zhang Xin-bao (1965-), male, Associate professor, research direction: precise mechanism and instrument.

A Frame Breaking Based Hybrid Algorithm for UHF RFIDAnti-Collision

Multi-tag collision imposes a vital detrimental effect on reading performanceof an RFID system. In order to ameliorate such collision problem and to improve thereading performance, this paper proposes an efficient tag identification algorithm termedas the Enhanced Adaptive Tree Slotted Aloha (EATSA). The key novelty of EATSA is toidentify the tags using grouping strategy. Specifically, the whole tag set is divided intogroups by a frame of size F. In cases multiple tags fall into a group, the tags of the groupare recognized by the improved binary splitting (IBS) method whereas the rest tags arewaiting in the pipeline. In addition, an early observation mechanism is introduced toupdate the frame size to an optimum value fitting the number of tags. Theoretical analysisand simulation results show that the system throughput of our proposed algorithm canreach as much as 0.46, outperforming the prior Aloha-based protocols.

A Physical Layer Network Coding Based Tag Anti-Collision Algorithm for RFID System

In RFID(Radio Frequency IDentification)system,when multiple tags are in the operating range of one reader and send their information to the reader simultaneously,the signals of these tags are superimposed in the air,which results in a collision and leads to the degrading of tags identifying efficiency.To improve the multiple tags’identifying efficiency due to collision,a physical layer network coding based binary search tree algorithm(PNBA)is proposed in this paper.PNBA pushes the conflicting signal information of multiple tags into a stack,which is discarded by the traditional anti-collision algorithm.In addition,physical layer network coding is exploited by PNBA to obtain unread tag information through the decoding operation of physical layer network coding using the conflicting information in the stack.Therefore,PNBA reduces the number of interactions between reader and tags,and improves the tags identification efficiency.Theoretical analysis and simulation results using MATLAB demonstrate that PNBA reduces the number of readings,and improve RFID identification efficiency.Especially,when the number of tags to be identified is 100,the average needed reading number of PNBA is 83%lower than the basic binary search tree algorithm,43%lower than reverse binary search tree algorithm,and its reading efficiency reaches 0.93.

A Dynamic Multi-ary Query Tree Protocol for Passive RFID Anti-collision

In this paper,a dynamic multi-ary query tree(DMQT)anti-collision protocol for Radio Frequency Identification(RFID)systems is proposed for large scale passive RFID tag identification.The proposed DMQT protocol is based on an iterative process between the reader and tags which identifies the position of collision bits through map commands and dynamically encodes them to optimize slots allocation through query commands.In this way,the DMQT completely eliminates empty slots and greatly reduces collision slots,which in turn reduces the identification time and energy costs.In addition and differently to other known protocols,the DMQT does not need to estimate the number of tags,reducing the protocol implementation complexity and eliminating the uncertainty caused by the estimation algorithm.A numerical analysis shows that DMQT has better performance than other algorithms for a number of tags larger than 300.Meanwhile,when the number of tags is 2000 and the tag identity(ID)length is 128 bits,the total identification time is 2.58 s and the average energy cost for a tag identification is 1.2 mJ,which are 16.9%and 10.4%less than those of state-of-the-art algorithms,respectively.In addition,a DMQT extension based on ACK command has also been presented to deal with capture effect and avoid missing identification.

Synchronous Dynamic Adjusting: An Anti-Collision Algorithm for an RF-UCard System

An RF-UCard system is a contactless smartcard system with multiple chip operating systems and multiple applications. A multi-card collision occurs when more than one card within the reader’s read field and thus lowers the efficiency of the system. This paper presents a novel and enhanced algorithm to solve the multi-card collision problems in an RF-UCard system. The algorithm was originally inspired from framed ALOHA-based anti-collision algorithms applied in RFID systems. To maximize the system efficiency, a synchronous dynamic adjusting (SDA) scheme that adjusts both the frame size in the reader and the response probability in cards is developed and evaluated. Based on some mathematical results derived from the Poisson process and the occupancy problem, the algorithm takes the estimated card quantity and the new arriving cards in the current read cycle into consideration to adjust the frame size for the next read cycle. Also it changes the card response probability according to the request commands sent from the reader. Simulation results show that SDA outperforms other ALOHA-based anti-collision algorithms applied in RFID systems.

Adaptive Trajectory Tracking Control for Nonholonomic Wheeled Mobile Robots:A Barrier Function Sliding Mode Approach

The trajectory tracking control performance of nonholonomic wheeled mobile robots(NWMRs)is subject to nonholonomic constraints,system uncertainties,and external disturbances.This paper proposes a barrier function-based adaptive sliding mode control(BFASMC)method to provide high-precision,fast-response performance and robustness for NWMRs.Compared with the conventional adaptive sliding mode control,the proposed control strategy can guarantee that the sliding mode variables converge to a predefined neighborhood of origin with a predefined reaching time independent of the prior knowledge of the uncertainties and disturbances bounds.Another advantage of the proposed algorithm is that the control gains can be adaptively adjusted to follow the disturbances amplitudes thanks to the barrier function.The benefit is that the overestimation of control gain can be eliminated,resulting in chattering reduction.Moreover,a modified barrier function-like control gain is employed to prevent the input saturation problem due to the physical limit of the actuator.The stability analysis and comparative experiments demonstrate that the proposed BFASMC can ensure the prespecified convergence performance of the NWMR system output variables and strong robustness against uncertainties/disturbances.

Application of Ship Maneuvering Simulator's Technology on Research of Vessels Automatic Anti-Collision

In this paper, the authors make a summary of current situation of research on the Auto Anti-Collision, briefly introduce the components and functions of the NSACA Simulation Platform and bring forward the project to realize the simulation of an Automatic Anti-Collision control, based on the NSACA Simulation Platform. Finally give typical examples from a great deal of simulating tests and analyze them.

Adaptive state-constrained/model-free iterative sliding mode control for aerial robot trajectory tracking

This paper develops a novel hierarchical control strategy for improving the trajectory tracking capability of aerial robots under parameter uncertainties.The hierarchical control strategy is composed of an adaptive sliding mode controller and a model-free iterative sliding mode controller(MFISMC).A position controller is designed based on adaptive sliding mode control(SMC)to safely drive the aerial robot and ensure fast state convergence under external disturbances.Additionally,the MFISMC acts as an attitude controller to estimate the unmodeled dynamics without detailed knowledge of aerial robots.Then,the adaption laws are derived with the Lyapunov theory to guarantee the asymptotic tracking of the system state.Finally,to demonstrate the performance and robustness of the proposed control strategy,numerical simulations are carried out,which are also compared with other conventional strategies,such as proportional-integralderivative(PID),backstepping(BS),and SMC.The simulation results indicate that the proposed hierarchical control strategy can fulfill zero steady-state error and achieve faster convergence compared with conventional strategies.