Acoustic Non-Destructive Testing Technology in Concrete Bridge Inspection and Pile Foundation Detection

This article takes the actual construction project of a certain concrete bridge project as an example to analyze the application of acoustic non-destructive testing technology in its detection.It includes an overview of a certain bridge construction project studied and acoustic non-destructive testing technology and the application of acoustic non-destructive testing technology in actual testing.This analysis hopes to provide some guidelines for acoustic non-destructive testing of modern concrete bridge projects.

Advances of Genetic Testing Technology in Etiology Diagnosis of Recurrent Spontaneous Abortion

Recurrent spontaneous abortion (RSA) is a complex and heterogeneous disorder with multiple etiologies. Genetic factors are thought to play an important role in the etiology of RSA. With recent advances in genetic testing technologies, there has been an increasing interest in using these tools to diagnose the etiology of RSA. This review discusses the different types of genetic testing methods, such as karyotyping, chromosomal microarray analysis, next-generation sequencing, and their applications in the diagnosis of the etiology RSA. The use of genetic testing in the diagnosis of RSA has the potential to improve the accuracy of diagnosis and the understanding of the underlying mechanisms of the disorder, which could lead to better management and treatment of affected individuals.

Discussion on the Status Quo of Non-Destructive Testing Technology in Highway Engineering and Strategies of Improving the Quality of Testing

Highway test and detection technology play a very important role in controlling the quality of road and bridge engineering and improving the maintenance of roads and bridges.The study of highway bridge test detection technology is both theoretically and practically useful.Road and bridge test and detection is a complicated task.With the development of science and technology,highway and bridge engineering test and detection technology has also made great progress.The continuous improvement of test and detection technology has brought good social benefits to road and bridge construction.This article discusses the problems in test and detection technology of highway bridges and how to improve the quality of test and detection.

Hard IP Core Nondestructive Testing Technology

Based on the analysis of the existing hard IP core testing technology, the hard IP core nondestructive testing technology was studied, according to the verification requirements of a large number of hard IP core precise and fast testing. Combined with the external automatic test equipment (ATE) and the on-chip evaluation circuit, a general evaluation system of simulating user system on chip (SOC) with signal timing calibration and compensation by software and hardware compensation structures were introduced to realize the function, performance and reliability verification of the hard IP core. The design and verification of a random access memory (SRAM) hard IP core based on an on-chip evaluation circuit was actually completed, and the key timing parameters of the hard IP core were tested. The address setup time parameter was taken as an example to analyze the specific testing method and the test results were obtained. With this testing technology, the accuracy of testing the timing parameters of hard IP core can reach pS level, compared with the hard IP core packaged test, the accuracy of the result data is fully reflected.

Discussion and Research on Orthopedic Biomechanics Testing Technology

With the continuous development of today's science and technology,orthopedic research has also achieved continuous updates in materials and machinery.In this case,the mechanics testing technology of orthopedics also needs to be further updated and developed,so that it can effectively meet the requirement for today's orthopedic mechanical testing.Based on this,this article analyzes several advanced orthopedic mechanics testing techniques.It is hoped that this analysis can provide a reference for the good application and development of orthopedic mechanics testing technology.

A brief analysis on the teaching reform of mechanical engineering testing technology

Mechanical engineering testing technology is a basic course of mechanical related majors,which occupies a very important position. The author combining the actual situation of local colleges and universities taking office itself for some disadvantages in traditional teaching mode,this paper put forward should change single teaching methods in teaching,establish a practical laboratory,pay more attention to the perfect combination of theoretical knowledge and practical ability,to fully develop the students' ability of independent innovation and practical ability.

An experimental investigation on the effect of grain size on oil-well sand production

Sand production in oil wells is closely related to the mechanical behavior and petrographical properties of sandstones reservoir. Grain size is one of the main parameters controlling the phenomenon, which is studied in this paper. Large-scale hollow cylindrical synthetic samples with the same rock strength but different grain sizes were tested by an experimental setup in the laboratory. Different external stresses and fluid flow rates were applied to the samples and produced sand was measured continuously. Results show two different trends between sanding stress level and grain size. For the samples with finer grain size （D50〈0.3 mm）, the required confining stress for different sanding levels decreased with an increase in the grain size and for the samples with the coarser grains （D50〉0.3 mm） the required confining stress for different sanding levels dramatically increased with an increase in the grain size. Those two different trends were discussed and explained. The first one was production of individual grains and the second was bigger chunks in the slab form. In samples with large grains, plastic zones around hole were changed to a completely loose zone including interlocked individual grains or cluster of grains. In these samples after breakage of these interlocked zones sand was produced in the form of individual grains and clusters. Contrary to this, for samples with smaller grain size, shear bands were formed around the plastified hole and sand was produced in the form of big chunks or slabs.

Semi-Industrial Test of Underground Coal Gasification In Well No.2 in Xinhe, Xuzhou

The necessity of underground coal gasification is explained. The condition,technology character,and process of the semi-industrial test of underground coal gasification in well No. 2 at Xinhe, Xuzhou,are introduced. The test results indicate that the technique of long tunnel,large sectiou,two stage underground coal gasification can obtain a large output of coal gas with a high heat value, making the working process stable. So the feasibility of the new techuology is verified. It can be concluded that there will have a good application prospect of the technique in China.

Calculating minimum perforating depth with consideration of plastic deformation around well-hole

In order to obtain the perforation depth, the three zones with different permeability because of plastic deformation and fluid invasion were studied based on related theories. The study shows that the calculation of perforation depth should take account of not only damaged zone, but also plastic zone, because the plastic zone has much lower permeability. The required minimum perforation depth was obtained by making the solution of elastic/plastic equations, and the factors affecting perforation depth were analyzed accordingly.

TESTING TECHNOLOGY OF OXYGEN IN MINERALS WITH EPMA

EPMA has used to measure oxygen con- tent directly in recentyears. This paper discusses the fac- tors affecting the quantitativeanalysis of oxygen content and the optimal experimental conditions,and gives some measured results of oxygen content in corundums whichare collected from different geological situations.

Research on Testing Technology of Relay Protection for Intelligent Substations

Intelligent substations adopt various kinds of new technologies, including information sharing technology based on IEC61850, digital sampling technology, synchronization technology, and network transmission technology. Relay protection equipment faces all the challenges brought by the application of these new technologies. After analyzing the demand for test, the authors propose testing methods and technical requirements targeting the test items in great need, including ICD model file test, digital interface performance test, coordination performance test with merging unit and smart terminal, network pressure test. And the problems occurring during the tests are summarized.

Application of Formation Testing Technology to Oil and and Gas Exploration in China

The introduction and application of formation testing technology to China has been relatively late.In the 1940's,the pounding valve tester developed by Johnston Company was used in.Yumen Oilfield.After the 1950's,the formation testing technology was no longer used due to introduction and application of former Soviet Union's testing technology.

Preparation Technology of Wuwei Xiaoke Granules

[Objectives]To optimize the extraction and preparation technology of Wuwei Xiaoke granules.[Methods]Taking the extraction rate of extract as the scoring standard,the water extraction technology was optimized by orthogonal test.The influence of the proportion of pharmaceutical excipients on the molding conditions of Wuwei Xiaoke granules was investigated using granule molding rate,solubility,moisture,granularity,water-soluble extract and microorganism examination as evaluation indicators,and the optimal molding technology was optimized.[Results]The extraction technology was soaking in water for 0.5 h and heat extraction twice for 1 h each time:adding 10 times the amount of water in the first time,and adding 8 times the amount of water in the second time.The best molding technology was:extract density 1.13-1.16(55-60℃),extract:soluble starch=1:2,and 0.15%stevioside.[Conclusions]The water extraction technology and granule molding technology optimized by orthogonal test are reliable and stable,with good granular characteristics,easy oral administration and good solubility,which can maximize the comprehensive quality of Wuwei Xiaoke granules,and provide an effective reference for the preparation and production of Wuwei Xiaoke granules.

隧道不良地质识别:方法、现状及智能化发展方向

随着隧道施工对于不良地质识别精度要求的不断提高以及人工智能技术的发展,融合多源信息的不良地质智能化识别已成为发展趋势。本文首先阐述了常见的6种隧道不良地质类型及其地质成因,回顾分析了隧道主要的不良地质识别方法及现状,详细介绍了笔者在不良地质智能化识别方面的探索性研究:基于机器学习利用图像识别技术对隧道围岩岩性与裂隙特征进行智能识别;融合图像和光谱特征进行不良地质识别;将地化分析融入到传统的超前钻探中,融合随钻参数和地化信息进行不良地质随钻识别,既可以发挥超前钻探在感知岩体质量和地层信息变化方面的优势,又可以发挥地化分析在岩性和不良地质异常识别方面的优势;基于地质与物探联合反演进行不良地质识别,旨在实现掌子面前方不良地质体“形”(位置、形态、规模)和“性”(性质和类型)的精确识别。最后,对隧道不良地质智能化识别的发展趋势进行了展望。

光谱技术在果品无损检测中的应用研究进展

介绍了常用的果品无损检测方法,包括电子鼻法、X射线计算机断层成像法、机械方法、磁共振(核磁共振)成像光谱学法、拉曼光谱学法、近红外光谱技术等;重点综述了高光谱成像技术在无损检测水果结构特性、生化成分和安全性等方面的研究进展,以期为水果品质的无损检测研究提供参考。

Analysis on On-Site Asphalt Pavement Quality Inspection Technology in Highway Engineering

The acceleration of urbanization has promoted the increase in the number of urban highway projects,resulting in an increase of emphasis on the quality of urban highway projects.The quality and safety of highway construction directly affects the driving comfort,safety,and service life after it is put into operation.Among them,asphalt pavement is an important structure in highway construction,and it is also a key link that directly affects the construction quality.In order to ensure the quality of construction,it is necessary to strengthen on-site testing during the construction process to discover problems in time,and to ensure that the construction is up to standard.This paper mainly presents an analysis on the necessity and application of on-site quality inspection technology for asphalt pavement construction of highway engineering,and outlines measures to improve highway engineering construction testing technology.

Analysis of Highway Roadbed Performance Evaluation Technology

With the continuous development of China,the requirements for road construction are also increasing.Among them,strengthening the performance of roadbed test can effectively improve road construction.Besides,it is also crucial to perform suitable tests in a timely manner.Therefore,highway inspection technology should be improved for the continuous development of highway construction,which will be explained in this paper,in hopes of improving the construction of highway in China.

Discussion on Test and Detection Technology of Highway Asphalt Pavement

The road traffic industry in China has been developing rapidly in recent years.Asphalt has become the main material in road construction because of its seamless connection and short construction period,and it has an important impact on the overall quality of highway construction.Therefore,it is necessary to conduct scientific and reasonable tests and detections for highway asphalt pavement.This paper presents a discussion on the test and detection technology of highway asphalt pavement for future reference.

医疗器械检验检测现状及发展趋势探索

目的该文旨在迎接我国医疗器械检验检测行业的新业态和新挑战,探索行业的未来发展方向。方法在概述医疗器械检验检测行业现状的基础上,采用专家访谈和线上问卷的方式,调研40家医疗器械检验检测机构及相关企事业单位,重点关注科技创新能力和形式、行业发展瓶颈等重要问题。结果通过整理和分析调研数据,得出行业发展的5个积极趋势:完善机构整体布局,加强区域特色中心建设;完善第三方合作研究组织和第三方评审机构的准入与监管机制;鼓励科技创新,优化人才队伍,赋能检验检测技术高质量发展;构建医疗器械安全监管信息化共享平台;加强在用医疗器械设备的安全监测。创新之处采用专家访谈和循证研究的方法,获取客观可靠的数据,为行业发展趋势的研究和探索提供了有力的依据。

Technologies for Asphalt Pavement Surface Testing in Road and Bridge Construction

Asphalt pavement is currently one of the main components in the construction of roads and bridges.However,from a practical point of view,various quality problems are prone to occur in the surface layer of asphalt pavement,which will lead to the poor overall quality of road and bridge projects.Therefore,it should be applied reasonably.Advanced testing technologies are used to test the mixture quality,compaction,segregation,thickness,and other aspects of the asphalt pavement surface layer,so as to improve the quality of the asphalt pavement surface layer,and then improve the overall quality of road and bridge construction.Therefore,this paper mainly analyzes the technologies for asphalt pavement surface layer testing in road and bridge engineering construction.