The geological conditions of offshore shallow water delta oil reservoirs were complex, with limited well data and large well spacing. Taking A Oilfield in the Bohai Sea Area, China as an example, the target sand body ...The geological conditions of offshore shallow water delta oil reservoirs were complex, with limited well data and large well spacing. Taking A Oilfield in the Bohai Sea Area, China as an example, the target sand body was formed in a shallow water delta sedimentary environment, with well-developed underwater distributary channels and frequent branching and diversion. The reservoir was strong non-uniformity and uneven plane water cut pressure. To this end, based on the existing work of predecessors, combined with seismic, logging, and production dynamics data, and based on the genesis mechanism of shallow water delta reservoirs, the boundary of composite river channels was identified through seismic facies, and logging facies were used to subdivide them into single river levels within the composite river channels. Then, seismic waveform characteristics were applied to track and characterize the plane distribution of single river channels, guiding the efficient development of offshore shallow water delta oil fields and achieving increased storage and production in Bohai Oilfield, China.展开更多
The conventional lithofacies and facies model of subaerial and marine pyroclastic rocks cannot reflect the characteristics of subaqueous volcanic edifice in lacustrine basins.In order to solve this problem,the lithofa...The conventional lithofacies and facies model of subaerial and marine pyroclastic rocks cannot reflect the characteristics of subaqueous volcanic edifice in lacustrine basins.In order to solve this problem,the lithofacies of subaqueous eruptive pyroclastic rocks is discussed and the facies model is established by taking the tuff cone of Cretaceous Huoshiling Formation in the Chaganhua area of the Changling fault depression,Songliao Basin as the research object.The results indicate that the subaqueous eruptive pyroclastic rocks in the Songliao Basin can be divided into two facies and four subfacies.The two facies are the subaqueous explosive facies and the volcanic sedimentary facies that is formed during the eruption interval.The subaqueous explosive facies can be further divided into three subfacies:gas-supported hot pyroclastic flow subfacies,water-laid density current subfacies and subaqueous fallout subfacies.The volcanic sedimentary facies consists of pyroclastic sedimentary rocks containing terrigenous clast subfacies.A typical facies model of the tuff cone that is formed by subaqueous eruptions in the Songliao Basin was established.The tuff cone is generally composed of multiple subaqueous eruption depositional units and can be divided into two facies associations:near-source facies association and far-source facies association.The complete vertical succession of one depositional unit of the near-source facies association is composed of pyroclastic sedimentary rocks containing terrigenous clast subfacies,gas-supported hot pyroclastic flow subfacies,water-laid density current subfacies and subaqueous fallout subfacies from bottom to top.The depositional unit of the far-source facies association is dominated by the subaqueous fallout subfacies and contains several thin interlayered deposits of the water-laid density current subfacies.The gas-supported hot pyroclastic flow subfacies and the pyroclastic sedimentary rocks containing terrigenous clast subfacies are favorable subaqueous eruptive facies for reservoirs in continental lacustrine basins.展开更多
Based on five types of conventional logging curves including GR,RLLD,CNL,DEN and AC,and 39 core samples from 30 representative boreholes,the logging characteristics and lithofacies and sub-facies of the basaltic rocks...Based on five types of conventional logging curves including GR,RLLD,CNL,DEN and AC,and 39 core samples from 30 representative boreholes,the logging characteristics and lithofacies and sub-facies of the basaltic rocks were studied.Three basaltic facies and four sub-facies are recognized from the well logs,includ-ing volcanic conduit facies(post intrusive sub-facies),explosive facies,and effusive lava flow facies(tabular flow,compound flow and hyaloclastite sub-facies).The post intrusive,tabular flow and compound flow sub-facies logging curves are mainly controlled by the distribution of vesiculate zones and vesiculate content,which are characterized by four curves with good correlation.Post intrusive sub-facies are characterized by high RLLD,high DEN,with a micro-dentate logging curve pattern,abrupt contact relationships at the top and base.Tabular flow sub-facies are characterized by high RLLD,high DEN,with a bell-shaped log curve pattern,abrupt contact at the base and gradational contact at the top.Compound flow sub-facies are characterized by medium-low RLLD,with a micro-dentate or finger-like logging curve pattern,abrupt contact at the base and gradational contact at the top.Explosive facies and hyaloclastite sub-facies logging curves are mainly controlled by the distribution of the size and sorting of rock particles,which can be recognized by four kinds of logging curves with poor cor-relation.Explosive facies are characterized by low RLLD,medium-low CNL and low DEN,with a micro-dentate logging curve pattern.Hyaloclastite sub-facies are characterized by low RLLD,high CNL,low DEN and high AC,with a micro-dentate logging curve pattern.The present research is beneficial for the prediction of basaltic reser-voirs not only in the Liaohe depression but also in the other volcanic-sedimentary basins.展开更多
An integrated geological-petrophysical analysis of the rudist-bearing sequence of the Cretaceous Sarvak Formation is given one giant oilfield,and provides an improved understanding of this main reservoir in the Abadan...An integrated geological-petrophysical analysis of the rudist-bearing sequence of the Cretaceous Sarvak Formation is given one giant oilfield,and provides an improved understanding of this main reservoir in the Abadan Plain,in the Zagros Basin,SW Iran.The main objective of this study is to evaluate reservoir potential of the Sarvak Formation,and then to utilize the calibrated well log signature to correlate reservoir potential in un-cored wells.Eight main facies are recognized and categorized in five facies groups:lagoon,shoal,rudist-biostrome,slope,and shallow open marine,deposited on a shelf carbonate platform.Given the distribution of diagenetic products and their effects on pore systems,three diagenetic facies namely,(DF-1)low dissolution and cementation;(DF-2);high dissolution;and(DF-3)high cementation are differentiated.The initial sedimentary characteristics in combination with distribution of diagenetic products play an important role in reservoir quality heterogeneity.The effect of diagenetic processes related to disconformities mainly depends on the facies nature below these surfaces.Grain-dominated facies of shoal and rudist debris,observed below the Cenomanian–Turonian disconformity,are mostly characterized by high dissolution and interconnected pore systems.Finally,depositional and diagenetic facies in the studied wells are correlated by petrophysical well log data,leading to distribution of the reservoir zones.Data obtained can be utilized for efficient reservoir characterization of the Sarvak Formation and its equivalent units in the Arabian Plate.展开更多
Hydrocarbon resources in the Qiongdongnan Basin have become an important exploration target in China.However,the development of high-quality source rocks in this basin,especially in its deep-water areas,are still not ...Hydrocarbon resources in the Qiongdongnan Basin have become an important exploration target in China.However,the development of high-quality source rocks in this basin,especially in its deep-water areas,are still not fully understood.In this study,evolutions of sedimentary facies and palaeoenvironment and their influences on the development of source rocks in diverse tectonic regions of the Qiongdongnan Basin were investigated.The results show that during the Oligocene and to Miocene periods,the sedimentary environment of this basin progressively varied from a semi-closed gulf to an open marine environment,which resulted in significant differences in palaeoenvironmental conditions of the water column for various tectonic regions of the basin.In shallow-water areas,the palaeoproductivity and reducibility successively decrease,and the hydrodynamic intensity gradually increases for the water columns of the Yacheng,Lingshui,and Sanya-Meishan strata.In deep-water areas,the water column of the Yacheng and Lingshui strata has a higher palaeoproductivity and a weaker hydrodynamic intensity than that of the Sanya-Meishan strata,while the reducibility gradually increases for the water columns of the Yacheng,Lingshui,and Sanya-Meishan strata.In general,the palaeoenvironmental conditions of the water column are the most favorable to the development of the Yacheng organic-rich source rocks.Meanwhile,the Miocene marine source rocks in the deep-water areas of the Qiongdongnan Basin may also have a certain hydrocarbon potential.The differences in the development models of source rocks in various tectonic regions of continental margin basins should be fully evaluated in the exploration and development of hydrocarbons.展开更多
Introduction: Rabies is a highly fatal viral disease outside the post-exposure prophylaxis (PEP). Data from previous studies and reports from the rabies center show that cases of death from human rabies are regularly ...Introduction: Rabies is a highly fatal viral disease outside the post-exposure prophylaxis (PEP). Data from previous studies and reports from the rabies center show that cases of death from human rabies are regularly reported, despite training measures for health workers, awareness-raising and communities, and the availability of vaccines. Objectives: The aim of this study was to analyse the determinants of human rabies deaths in Côte d’Ivoire from 2016 to 2022. Method: A retrospective cross-sectional qualitative study was carried out from January to August 2023 on all the records of patients who died of human rabies at the Treichville Rabies Center from 2016 to 2022. An analysis of the rabies center’s annual activity reports from 2016 to 2022 was also carried out in order to complete the information gathered from the files. Results: The socio-demographic characteristics showed that out of 148 deaths, children accounted for 47.97% (71) and 66.22% (98) of rabies deaths were male, with an M/F sex ratio of 1.96. In terms of clinical characteristics, in 97.30% (144) of cases, the deceased had presented with furious rabies, and analysis by the Pasteur Institute of Côte d’Ivoire laboratory confirmed 101 cases (92.66%) of human rabies. Geographical distribution showed that cases of human rabies were recorded in 56 health district, and 64% (94) of the deceased lived in rural areas. The main causes of the occurrence of rabies were essentially non-use of post-exposure prophylaxis (PEP) and missed vaccination due to ignorance. Conclusion: In view of these results, control strategies and interventions need to be adapted to the epidemiological characteristics of the disease, using a community-based approach with a view to eliminating dog-transmitted rabies by 2030.展开更多
This paper proposes a novel approach for generating 3-dimensional complex geological facies models based on deep generative models.It can reproduce a wide range of conceptual geological models while possessing the fle...This paper proposes a novel approach for generating 3-dimensional complex geological facies models based on deep generative models.It can reproduce a wide range of conceptual geological models while possessing the flexibility necessary to honor constraints such as well data.Compared with existing geostatistics-based modeling methods,our approach produces realistic subsurface facies architecture in 3D using a state-of-the-art deep learning method called generative adversarial networks(GANs).GANs couple a generator with a discriminator,and each uses a deep convolutional neural network.The networks are trained in an adversarial manner until the generator can create "fake" images that the discriminator cannot distinguish from "real" images.We extend the original GAN approach to 3D geological modeling at the reservoir scale.The GANs are trained using a library of 3D facies models.Once the GANs have been trained,they can generate a variety of geologically realistic facies models constrained by well data interpretations.This geomodelling approach using GANs has been tested on models of both complex fluvial depositional systems and carbonate reservoirs that exhibit progradational and aggradational trends.The results demonstrate that this deep learning-driven modeling approach can capture more realistic facies architectures and associations than existing geostatistical modeling methods,which often fail to reproduce heterogeneous nonstationary sedimentary facies with apparent depositional trend.展开更多
In recent years, deep water areas have become popular exploration fields because of their abundant hydrocarbon resource potential. There are only relatively poor planar seismic profiles and no wells for deepwater area...In recent years, deep water areas have become popular exploration fields because of their abundant hydrocarbon resource potential. There are only relatively poor planar seismic profiles and no wells for deepwater areas of the Lingshui Formation in the Qiongdongnan Basin. A lot of faults developed and strata are fragmented due to high temperatures and high pressure, and this has resulted in dim sequence boundaries. Based on seismic data of the deepwater area and well data of bordering shallow water areas, Lingshui Formation was divided into four third class sequences; namely SI, SII, SIII and SIV, and the three-dimensional isochronous stratigraphic framework of the Lingshui Formation in the studied area was shaped. Based mainly on seismic attributes such as amplitude, continuity, internal structure and external shape, six typical seismic facies were identified, including mat-shaped, filling, wedge-shaped, foreset, moundy-shaped and lenticular-shaped, and a seismic facies distribution map was subsequently drawn. With studies on wells of bordering shallow water areas, regional sedimentary characteristics, and isopach map as references, sedimentary planar distribution features were analyzed. The deepwater area of the Lingshui Formation has mainly developed littoral and shallow sea. Sandstone bodies of fan delta, braided river delta, slope fan, basin floor fan, and turbidite fan are at an interdigitate junction to marine hydrocarbon source rocks and thus are favorable prospecting targets.展开更多
This paper presents the primary results of petrologic, mineralogical and petrochemical studies of garnet-bearing granulite facies rock xenoliths from Xinyang, Henan Province. These xenoliths, which are found in a pipe...This paper presents the primary results of petrologic, mineralogical and petrochemical studies of garnet-bearing granulite facies rock xenoliths from Xinyang, Henan Province. These xenoliths, which are found in a pipe of late Mesozoic volcaniclastic breccia, are of high density (3.13–3.30 g/cm3) and high seismic velocity (Vp = 7.04–7.31 km/s), being products of underplating of basaltic magmas and had experienced granulite facies metamorphism. The underplating and metamorphism took place before the eruption of the host rock. Petrographical studies and equilibrium T-P calculations show that these xenoliths were captured at a 49 km depth and experienced at least a 16 km uplift before they were captured. The dynamics of the uplift could be related to the continent-continent collision between the North China plate and the Yangtze plate during the Triassic.展开更多
Molar tooth structure (MTS) represented by complex ptygmatical shapes is widely distributed in the Proterozoic of the world. MTS filled by fine, equant sparry calcite (or dolomite) displays an abrupt contact with ...Molar tooth structure (MTS) represented by complex ptygmatical shapes is widely distributed in the Proterozoic of the world. MTS filled by fine, equant sparry calcite (or dolomite) displays an abrupt contact with hosting rocks, which are mainly composed of carbonaceous micrites and fine-grained carbonates with local silts and stormdominated deposits with graded, cross or wave beddings, numerous erosional surfaces and truncated and fills or guttered bases. Occurrence of MTS suggests a result of the constraint of sedimentary facies, and the storm-base in ramp settings is the maximum depth for the formation of MTS. Vertical succession of MTS-bearing carbonates shows a deposition stacked by high-frequency shallow subtidal and peritidal cycles. An individual cyclic MTS-bearing sequence is characterized by thinning, shallowing and dynamic decreasing-upward, and peritidal caps of purple red iron and organic carbonaceous sediments with more complicated shapes of MTS are common on the top of individual MTS-bearing sequences.展开更多
Different genetic types of meter-scale cyclic sequences in stratigraphic records result from episodic accumulation of strata related to Milankovitch cycles. The distinctive fabric natures of facies succession result f...Different genetic types of meter-scale cyclic sequences in stratigraphic records result from episodic accumulation of strata related to Milankovitch cycles. The distinctive fabric natures of facies succession result from the sedimentation governed by different sediment sources and sedimentary dynamic conditions in different paleogeographical backgrounds, corresponding to high-frequency sea-level changes. Naturally, this is the fundamental criterion for the classification of genetic types of meter-scale cyclic sequences. The widespread development in stratigraphic records and the regular vertical stacking patterns in long-term sequences, the evolution characters of earth history and the genetic types reflected by specific fabric natures of facies successions in different paleogeographical settings, all that show meter-scale cyclic sequences are not only the elementary working units in stratigraphy and sedimentology, but also the replenishment and extension of parasequence of sequence stratigraphy. Two genetic kinds of facies succession for meter-scale cyclic sequence in neritic-facies strata of carbonate and clastic rocks, are normal grading succession mainly formed by tidal sedimentation and inverse grading succession chiefly made by wave sedimentation, and both of them constitute generally shallowing upward succession, the thickness of which ranges from several tens of centimeters to several meters. The classification of genetic types of meter-scale cyclic sequence could be made in terms of the fabric natures of facies succession, and carbonate meter-scale cyclic sequences could be divided into four types: L-M type, deep-water asymmetrical type, subtidal type and peritidal type. Clastic meter-scale cyclic sequences could be grouped into two types: tidal-dynamic type and wave-dynamic type. The boundaries of meter-scale cyclic sequences are marked by instantaneous punctuated surface formed by non-deposition resulting from high-frequency level changes, which include instantaneous exposed punctuated surface, drowned punctuated surface as well as their relative surface. The development of instantaneous punctuated surface used as the boundary of meter-scale cyclic sequence brings about the limitations of Walter's Law on the explanation of facies distribution in time and space, and reaffirm the importance of Sander's Rule on analysis of stratigraphic records. These non-continuous surface could be traced for long distance and some could be correlative within same basin range. The study of meter-scale cyclic sequences and their regularly vertical stacking patterns in long-term sequences indicate that the research into cyclicity of stratigraphic records is a useful way to get more regularity from stratigraphic records that are frequently complex as well as non-integrated.展开更多
With continuous outcrops, developed shoal facies rocks, complete types of diagenesis and changeable diagenetic environments, Cambrian strata are well developed in the Xiadong area, Yichang, Hubei Province. Under the c...With continuous outcrops, developed shoal facies rocks, complete types of diagenesis and changeable diagenetic environments, Cambrian strata are well developed in the Xiadong area, Yichang, Hubei Province. Under the combined influence of numerous diageneses, secondary pores can be formed, which result in better reservoir properties of the rock strata.展开更多
A systematic analysis of southwestern Ordos Basin's sedimentary characteristics,internal architectural element association styles and depositional model was illustrated through core statistics,well logging data an...A systematic analysis of southwestern Ordos Basin's sedimentary characteristics,internal architectural element association styles and depositional model was illustrated through core statistics,well logging data and outcrop observations in Chang 8 oil-bearing group.This analysis indicates that shallow water delta sediments dominated by a fluvial system is the primary sedimentary system of the Chang 8 oil-bearing group of the Yanchang Formation in southwestern Ordos Basin.Four microfacies with fine grain sizes are identified: distributary channels,sheet sandstone,mouth bar and interdistributary fines.According to the sandbody's spatial distribution and internal architecture,two types of sandbody architectural element associations are identified: amalgamated distributary channels and thin-layer lobate sandstone.In this sedimentary system,net-like distributary channels at the delta with a narrow ribbon shape compose the skeleton of the sandbody that extends further into the delta front and shades into contiguous lobate distribution sheet sandstone in the distal delta front.The mouth bar is largely absent in this system.By analyzing the palaeogeomorphology,the palaeostructure background,sedimentary characteristics,sedimentary facies types and spatial distribution of sedimentary facies during the Chang 8 period,a distinctive depositional model of the Chang 8 shallow water fluvial-dominated delta was established,which primarily consists of straight multi-phase amalgamated distributary channels in the delta plain,net-like distributary channels frequently diverting and converging in the proximal delta front,sheet sandstones with dispersing contiguous lobate shapes in the distal delta front,and prodelta or shallow lake mudstones.展开更多
The formation and distribution of hydrocarbon accumulations are jointly controlled by "stratigraphic facies" and "fluid potential", which can be abbreviated in "control of facies/potential on hydrocarbon accumula...The formation and distribution of hydrocarbon accumulations are jointly controlled by "stratigraphic facies" and "fluid potential", which can be abbreviated in "control of facies/potential on hydrocarbon accumulation". Facies and potential control the time-space distribution of hydrocarbon accumulation macroscopically and the petroliferous characteristics of hydrocarbon accumulation microscopically. Tectonic facies and sedimentary facies control the time-space distribution. Lithofacies and petrophysical facies control the petroliferous characteristics. Favorable facies and high porosity and permeability control hydrocarbon accumulation in the lacustrine rift basins in China. Fluid potential is represented by the work required, which comprises the work against gravity, pressure, interfacial energy and kinetic energy. Hydrocarbon migration and accumulation are controlled by the joint action of multiple driving forces, and are characterized by accumulation in the area of low potential. At the structural high, low geopotential energy caused by buoyancy control anticlinal reservoir. The formation oflithological oil pool is controlled by low interfacial energy caused by capillary force. Low compressive energy caused by overpressure and faulting activity control the formation of the faulted- block reservoir. Low geopotential energy of the basin margin caused by buoyancy control stratigraphic reservoir. The statistics of a large number of oil reservoirs show that favorable facies and low potential control hydrocarbon accumulation in the rift basin, where over 85% of the discovered hydrocarbon accumulations are distributed in the trap with favorable facies and low potentials. The case study showed that the prediction of favorable areas by application of the near source-favorable facies-low potential accumulation model correlated well with over 90% of the discovered oil pools' distribution of the middle section of the third member of the Shahejie Formation in the Dongying Depression, Bohai Bay Basin.展开更多
Hydrothermal mineral assemblages and related hydrothermally enhanced fracturing are common in the Precambrian Dengying Formation of Central Sichuan Basin. Petrographic and geochemical analyses of core samples show tha...Hydrothermal mineral assemblages and related hydrothermally enhanced fracturing are common in the Precambrian Dengying Formation of Central Sichuan Basin. Petrographic and geochemical analyses of core samples show that the hydrothermal dolomite reservoirs of Dengying Formation consist of four main types of pores in the reservoir facies. These include: 1) hydrothermal dissolution vug(or pore), 2) intercrystalline pore, 3) residual inter-breccia vug(or pore), and 4) enlarged dissolved-fracture. There are three different fabrics dolomite in hydrothermal dolomite reservoirs, namely, saddle dolomite, fine-medium dolomite and micritic dolomite. Micritic dolomite is the original lithology of host rock. Saddle dolomite with curved or irregular crystal faces was directly crystallized from hydrothermal fluids(average temperature 192°C). Fine-medium dolomites are the products of recrystallization of micritic dolomite, resulting in abnormal geochemical characteristics, such as slight depletion of δ^(18)O, significant enrichment of Mn-Fe and ^(87)Sr/^(86)Sr, and positive Eu anomaly. A model for the distribution of various hydrothermal dolomite reservoir facies is proposed here, which incorporates three fundamental geological controls: 1) extensional tectonics and tectono-hydrothermal events(i.e., the Xingkai Taphrogenesis of Late Sinian-Early Cambrian, and Emei Taphrogenesis of Late Permian), 2) hydrothermal fluid storage in clastic rocks with large thickness(e.g., Nanhua System of Chengjiang Formation and part of Doushantuo Formation), and 3) confining bed for hydrothermal fluids(such as, the shale in Qiongzhusi Formation). The supply of hydrothermal fluid is critical. Large basement-rooted faults and associated grid-like fracture system may function as the channels for upward migration of hydrothermal fluid flow. The intersection of the above-mentioned faults(including the conversion fault), especially transtensional sags above negative flower structures on wrench faults can serve as a key target for future hydrocarbon exploration.展开更多
River-mouth bar is a fundamental element to constitute a delta system, and its internal facies architectures are vital to reconstruct delta evolution history and study high-resolution sequence stratigraphy. Changxing ...River-mouth bar is a fundamental element to constitute a delta system, and its internal facies architectures are vital to reconstruct delta evolution history and study high-resolution sequence stratigraphy. Changxing Island is a representative mouth-bar complex in the modern Changjiang Delta. Its vertical stacked strata produced by delta progradation were first studied by detailed facies analysis of core CX03, and then a general facies architecture and evolution history of mouth-bar complexes in the modern Changjiang Delta were discussed through a comparative study of 5 different cores and historical charts. A progradational deltaic sequence has generally a similar internal facies architecture, composed of massive muddy deposits of prodelta and delta-front slope facies at the bottom, sand-dominated deposits of delta-front platform, inter-bar channel and mouth-bar facies at the middle, and heterolithic deposits of tidal flat and saltmarsh facies at the top. There is a significant time lag for the initial formation of channel-mouth bar systems between Chongming and Jiuduansha Islands. Compared with subtidal flats, sedimentation rates on intertidal flats were highly accelerated, potentially resulting from weakening wave and tidal strength over extensive intertidal flats and increasing human embankment activities in the last few centuries. These findings provide some new clues to understand modern and ancient mouth-bar evolution and resultant sequence strata in tide-dominated deltas.展开更多
Exploration practices show that the Jurassic System in the hinterland region of the Junggar Basin has a low degree of exploration but huge potential, however the oil/gas accumulation rule is very complicated, and it i...Exploration practices show that the Jurassic System in the hinterland region of the Junggar Basin has a low degree of exploration but huge potential, however the oil/gas accumulation rule is very complicated, and it is difficult to predict hydrocarbon-bearing properties. The research indicates that the oil and gas is controlled by structure facies belt and sedimentary system distribution macroscopically, and hydrocarbon-bearing properties of sand bodies are controlled by lithofacies and petrophysical facies microscopically. Controlled by ancient and current tectonic frameworks, most of the discovered oil and gas are distributed in the delta front sedimentary system of a palaeo-tectonic belt and an ancient slope belt. Subaqueous branch channels and estuary dams mainly with medium and fine sandstone are the main reservoirs and oil production layers, and sand bodies of high porosity and high permeability have good hydrocarbon-bearing properties; the facies controlling effect shows a reservoir controlling geologic model of relatively high porosity and permeability. The hydrocarbon distribution is also controlled by relatively low potential energy at the high points of local structure macroscopically, while most of the successful wells are distributed at the high points of local structure, and the hydrocarbon-bearing property is good at the place of relatively low potential energy; the hydrocarbon distribution is in close connection with faults, and the reservoirs near the fault in the region of relatively low pressure have good oil and gas shows; the distribution of lithologic reservoirs at the depression slope is controlled by the distribution of sand bodies at positions of relatively high porosity and permeability. The formation of the reservoir of the Jurassic in the Junggar Basin shows characteristics of favorable facies and low-potential coupling control, and among the currenffy discovered reservoirs and industrial hydrocarbon production wells, more than 90% are developed within the scope of facies- potential index FPI〉0.5, while the FPI and oil saturation of the discovered reservoir and unascertained traps have relatively good linear correlation. By establishing the relation model between hydrocarbon- bearing properties of traps and FPI, totally 43 favorable targets are predicted in four main target series of strata and mainly distributed in the Badaowan Formation and the Sangonghe Formation, and the most favorable targets include the north and east of the Shinan Sag, the middle and south of the Mobei Uplift, Cai-35 well area of the Cainan Oilfield, and North-74 well area of the Zhangbei fault-fold zone.展开更多
Advances in photogrammetry have eased the acquisition of high-resolution digital information from outcrops, enabling faster, non-destructive data capturing and improved reservoir modeling. Geocellular models for flow ...Advances in photogrammetry have eased the acquisition of high-resolution digital information from outcrops, enabling faster, non-destructive data capturing and improved reservoir modeling. Geocellular models for flow dynamics with in the virtual outcrop in siliciclastic deposits at different sets of sandstone facies architecture remain, however, a challenge. Digital maps of bedding, lithological contrast, spatial-temporal variations of bedding and permeability characteristics make it more easy to understand flow tortuosity in a particular architecture. An ability to precisely model these properties can improve reservoir characterization and flow modeling at different scales. Here we demonstrate the construction of realistic 2 D sandstone facies based models for a pragmatic simulation of flow dynamics using a combination of digital point clouds dataset acquired from LiDAR and field investigation of the Sandakan Formation, Sabah, Borneo.Additionally, we present methods for enhancing the accuracy of outcrop digital datasets for producing high resolution flow simulation. A well-exposed outcrop from the Sandakan Formation, Sabah, northwest Borneo having a lateral extent of 750 m was chosen in order to implement our research approach. Sandstone facies and its connectivity are well constrained by outcrop observations, data from air-permeability measurements, bilinear interpolation of permeability, grid construction and water vector analysis for flow dynamics.These proportions were then enumerated in terms of static digital outcrop model(DOM) and facies model based on sandstone facies bedding characteristics. Flow simulation of water vector analysis through each of the four sandstone facies types show persistent spatial correlation of permeability that align with either cross-bedded orientation or straight with more dispersion high quality sandstone(porosity 21.25%-41.2%and permeability 1265.20-5986.25 mD) and moderate quality sandstone(porosity 10.44%-28.75% and permeability 21.44-1023.33 mD). Whereas, in more heterolithic sandstone(wavy-to flaser-bedded and bioturbated sandstone), lateral variations in permeability show spatially non-correlated patterns over centimeters to tens of meters with mostly of low quality sandstone(porosity 3.4%-12.31% and permeability < 1 mD to 3.21 mD). These variations reflect the lateral juxtaposition in flow dynamics. It has also been resulted that the vertical connectivity and heterogeneities in terms of flow are mostly pragmatic due to the interconnected sandstone rather than the quality of sandstone.展开更多
The Biluo Co and Amdo 114 station, northern Tibet, cropping out the Early Toarcian and Middle-Late Tithonian (Jurassic) organic-rich black shales, have been a focus to petroleum geologists in discussing their oil-pr...The Biluo Co and Amdo 114 station, northern Tibet, cropping out the Early Toarcian and Middle-Late Tithonian (Jurassic) organic-rich black shales, have been a focus to petroleum geologists in discussing their oil-producing potential. This paper first reports the trace elements and rare earth elements to discuss the paleoenvironments, redox conditions and sedimentary mechanisms of those black shales. Both sections exhibit variation in trace element abundances with concentrations 〈0.1 ppm to 760 ppm, mostly enriched in V, Cr, Ni, Cu, Zn, Mo, Ba and U. Element ratios of Ni/Co, V/Cr, U/Th and V/(V+Ni) plus U were used to identify redox conditions. The shale-normalized rare earth element (REE) patterns are characterized by the flat-shale type with instable Ce anomalies and very weekly positive Eu anomalies. Positive Ceanom values are significant with values varying between - 0.064 and 0.029 in Biluo Co, which may be interpreted as release of REE and input of riverine terrestrial matter with rich Ce (resulting in pH change) during the anoxic conditions. In the middle parts of Amdo 114 station, distinct negative Ceanom values are observed (-0.238 to -0.111) and associated surface water warming were interpreted as being related to a major sea level rise. In contrast, the formation of the black shales in the lower and upper part of the studied succession took place during a cooler (Ceanom values 〉-0.10), lower surface water productivity, and lower sea-level stage. Thus, we emphasize the role of different factors that control the formation of local and regional black shales. The most important factors are sea-level fluctuations and increasing productivity.展开更多
The Triassic petrostratigraphic system and chronologic stratigraphic sketch have been updated and perfected in the Qiangtang area, Qinghai-Tibet Plateau based on the integrated 1:250000 regional geological survey and...The Triassic petrostratigraphic system and chronologic stratigraphic sketch have been updated and perfected in the Qiangtang area, Qinghai-Tibet Plateau based on the integrated 1:250000 regional geological survey and the latest research progeny. The first finished 1:3000000 Triassic tectonic lithofacies paleogeographic maps in the Qiangtang area shows that the Triassic tectonic unit in the Qiangtang area can been divided into three parts from north to south: northern Qiangtang block; Longmucuo-Shuanghu suture zone; and southern Qiangtang block. The early-middle Triassic tectonic paleogeography in the Qiangtang area is divides into three sub- units: northern Qiangtang passive continental marginal basin (NQPB), Longmucuo- Shuanghu residual basin (LSRB) and southern Qiangtang residual basin (SQRB). The NQPB can be subdivided into four paleogeography units: The Tanggula-Zangxiahe shallow and bathyal sea; The Wangquanhe- Yingshuiquan carbonate platform; The Rejuechaka-Jiangaidarina littoral- shallow sea; and Qiangtang central uplift. The above units of The NQPB possess EW trend, geomorphology high in the south and low in the north, the seawater depth northward. The basinal paleo-current direction is unidirectional, and basinal tectonic subsidence center is in accord with the depo-center, located in the Tanggula-Zangxiahe belt, north of the basin. The sedimentation and tectonic evolution of the NQPB are characterized with passive continental marginal basin. The Qiangtang central orogenic denuded area (ancient land) may be as a sedimentary materials source of the NQPB. SQRB can be divided into two units: Duoma carbonate platform and southern Qiangtang neritic-deep sea. The late Triassic tectonic paleogeography in the Qiangtang area is the framework of the "archipelagic-sea" as a whole, and it may be divided into three sub-units: northern Qiangtang back- arc foreland basin(NQFB), Longmucuo-Shuanghu residual basin(LSRB) and southern Qiangtang marginal-sea basin(SQMB). Thereinto, NQFB can be divided into five paleogeography units: the Zangxiahe-Mingjinghu bathyal basin characterized with the flysch; the Tanggula shallow-sea shelf with the fine-clastics; the Juhuashang platform with carbonates; the Tumenggela-Shuanghu coastal- delta with coal-bearing clastics and the Nadigangri- Geladandong arc with volcanics and tuffs. In transverse section, the NQFB fills is wedge-shaped, and the sediments characterized with thicker in north and thinner in south, and with double materials derived from the Ruolagangri orogenic belt in north and the Shuanghu central orogenic belt in south. The late Triassic depocenter of NQFB is located in the middle of the basin, the Yakecuo-Bandaohu-Quemocuo belt, but the subsidence center in the north, the Zangxiahe- Mingjinghu belt, and basinal tectonic subsidence center not concordant with the depo-center. Late Triassic, the SQMB may be divided into three sub-units: Xiaochaka shallow-sea; Riganpeicuo platform~ and South Qiangtang southern bathyal basin. In transverse section, the basement of the SQMB is characterized with low in the northern and southern, but high in the middle; forming wedge shaped sediments with thicker in the north and thinner in the south; the sedimentary materials derived from the Qiangtang central uplift and Nadigangri arcs in north. The late Triassic subsidence centre of the SQMB is located in the northern (Xiaochaka area), but the depocenter in the southern (Qixiancuo Suobucha area). The sedimentation and tectonic evolution of the SQMB are characterized with marginal sea.展开更多
文摘The geological conditions of offshore shallow water delta oil reservoirs were complex, with limited well data and large well spacing. Taking A Oilfield in the Bohai Sea Area, China as an example, the target sand body was formed in a shallow water delta sedimentary environment, with well-developed underwater distributary channels and frequent branching and diversion. The reservoir was strong non-uniformity and uneven plane water cut pressure. To this end, based on the existing work of predecessors, combined with seismic, logging, and production dynamics data, and based on the genesis mechanism of shallow water delta reservoirs, the boundary of composite river channels was identified through seismic facies, and logging facies were used to subdivide them into single river levels within the composite river channels. Then, seismic waveform characteristics were applied to track and characterize the plane distribution of single river channels, guiding the efficient development of offshore shallow water delta oil fields and achieving increased storage and production in Bohai Oilfield, China.
基金Supported by the National Natural Science Foundation of China (41790453,41972313)。
文摘The conventional lithofacies and facies model of subaerial and marine pyroclastic rocks cannot reflect the characteristics of subaqueous volcanic edifice in lacustrine basins.In order to solve this problem,the lithofacies of subaqueous eruptive pyroclastic rocks is discussed and the facies model is established by taking the tuff cone of Cretaceous Huoshiling Formation in the Chaganhua area of the Changling fault depression,Songliao Basin as the research object.The results indicate that the subaqueous eruptive pyroclastic rocks in the Songliao Basin can be divided into two facies and four subfacies.The two facies are the subaqueous explosive facies and the volcanic sedimentary facies that is formed during the eruption interval.The subaqueous explosive facies can be further divided into three subfacies:gas-supported hot pyroclastic flow subfacies,water-laid density current subfacies and subaqueous fallout subfacies.The volcanic sedimentary facies consists of pyroclastic sedimentary rocks containing terrigenous clast subfacies.A typical facies model of the tuff cone that is formed by subaqueous eruptions in the Songliao Basin was established.The tuff cone is generally composed of multiple subaqueous eruption depositional units and can be divided into two facies associations:near-source facies association and far-source facies association.The complete vertical succession of one depositional unit of the near-source facies association is composed of pyroclastic sedimentary rocks containing terrigenous clast subfacies,gas-supported hot pyroclastic flow subfacies,water-laid density current subfacies and subaqueous fallout subfacies from bottom to top.The depositional unit of the far-source facies association is dominated by the subaqueous fallout subfacies and contains several thin interlayered deposits of the water-laid density current subfacies.The gas-supported hot pyroclastic flow subfacies and the pyroclastic sedimentary rocks containing terrigenous clast subfacies are favorable subaqueous eruptive facies for reservoirs in continental lacustrine basins.
文摘Based on five types of conventional logging curves including GR,RLLD,CNL,DEN and AC,and 39 core samples from 30 representative boreholes,the logging characteristics and lithofacies and sub-facies of the basaltic rocks were studied.Three basaltic facies and four sub-facies are recognized from the well logs,includ-ing volcanic conduit facies(post intrusive sub-facies),explosive facies,and effusive lava flow facies(tabular flow,compound flow and hyaloclastite sub-facies).The post intrusive,tabular flow and compound flow sub-facies logging curves are mainly controlled by the distribution of vesiculate zones and vesiculate content,which are characterized by four curves with good correlation.Post intrusive sub-facies are characterized by high RLLD,high DEN,with a micro-dentate logging curve pattern,abrupt contact relationships at the top and base.Tabular flow sub-facies are characterized by high RLLD,high DEN,with a bell-shaped log curve pattern,abrupt contact at the base and gradational contact at the top.Compound flow sub-facies are characterized by medium-low RLLD,with a micro-dentate or finger-like logging curve pattern,abrupt contact at the base and gradational contact at the top.Explosive facies and hyaloclastite sub-facies logging curves are mainly controlled by the distribution of the size and sorting of rock particles,which can be recognized by four kinds of logging curves with poor cor-relation.Explosive facies are characterized by low RLLD,medium-low CNL and low DEN,with a micro-dentate logging curve pattern.Hyaloclastite sub-facies are characterized by low RLLD,high CNL,low DEN and high AC,with a micro-dentate logging curve pattern.The present research is beneficial for the prediction of basaltic reser-voirs not only in the Liaohe depression but also in the other volcanic-sedimentary basins.
文摘An integrated geological-petrophysical analysis of the rudist-bearing sequence of the Cretaceous Sarvak Formation is given one giant oilfield,and provides an improved understanding of this main reservoir in the Abadan Plain,in the Zagros Basin,SW Iran.The main objective of this study is to evaluate reservoir potential of the Sarvak Formation,and then to utilize the calibrated well log signature to correlate reservoir potential in un-cored wells.Eight main facies are recognized and categorized in five facies groups:lagoon,shoal,rudist-biostrome,slope,and shallow open marine,deposited on a shelf carbonate platform.Given the distribution of diagenetic products and their effects on pore systems,three diagenetic facies namely,(DF-1)low dissolution and cementation;(DF-2);high dissolution;and(DF-3)high cementation are differentiated.The initial sedimentary characteristics in combination with distribution of diagenetic products play an important role in reservoir quality heterogeneity.The effect of diagenetic processes related to disconformities mainly depends on the facies nature below these surfaces.Grain-dominated facies of shoal and rudist debris,observed below the Cenomanian–Turonian disconformity,are mostly characterized by high dissolution and interconnected pore systems.Finally,depositional and diagenetic facies in the studied wells are correlated by petrophysical well log data,leading to distribution of the reservoir zones.Data obtained can be utilized for efficient reservoir characterization of the Sarvak Formation and its equivalent units in the Arabian Plate.
基金supported by the National Natural Science Foundation of China(42272162)the Natural Science Foundation of Guangdong Province(2021A1515011381 and 2021A1515011635)the Science Project of the CNOOC(KJZH-2021-0003-00).
文摘Hydrocarbon resources in the Qiongdongnan Basin have become an important exploration target in China.However,the development of high-quality source rocks in this basin,especially in its deep-water areas,are still not fully understood.In this study,evolutions of sedimentary facies and palaeoenvironment and their influences on the development of source rocks in diverse tectonic regions of the Qiongdongnan Basin were investigated.The results show that during the Oligocene and to Miocene periods,the sedimentary environment of this basin progressively varied from a semi-closed gulf to an open marine environment,which resulted in significant differences in palaeoenvironmental conditions of the water column for various tectonic regions of the basin.In shallow-water areas,the palaeoproductivity and reducibility successively decrease,and the hydrodynamic intensity gradually increases for the water columns of the Yacheng,Lingshui,and Sanya-Meishan strata.In deep-water areas,the water column of the Yacheng and Lingshui strata has a higher palaeoproductivity and a weaker hydrodynamic intensity than that of the Sanya-Meishan strata,while the reducibility gradually increases for the water columns of the Yacheng,Lingshui,and Sanya-Meishan strata.In general,the palaeoenvironmental conditions of the water column are the most favorable to the development of the Yacheng organic-rich source rocks.Meanwhile,the Miocene marine source rocks in the deep-water areas of the Qiongdongnan Basin may also have a certain hydrocarbon potential.The differences in the development models of source rocks in various tectonic regions of continental margin basins should be fully evaluated in the exploration and development of hydrocarbons.
文摘Introduction: Rabies is a highly fatal viral disease outside the post-exposure prophylaxis (PEP). Data from previous studies and reports from the rabies center show that cases of death from human rabies are regularly reported, despite training measures for health workers, awareness-raising and communities, and the availability of vaccines. Objectives: The aim of this study was to analyse the determinants of human rabies deaths in Côte d’Ivoire from 2016 to 2022. Method: A retrospective cross-sectional qualitative study was carried out from January to August 2023 on all the records of patients who died of human rabies at the Treichville Rabies Center from 2016 to 2022. An analysis of the rabies center’s annual activity reports from 2016 to 2022 was also carried out in order to complete the information gathered from the files. Results: The socio-demographic characteristics showed that out of 148 deaths, children accounted for 47.97% (71) and 66.22% (98) of rabies deaths were male, with an M/F sex ratio of 1.96. In terms of clinical characteristics, in 97.30% (144) of cases, the deceased had presented with furious rabies, and analysis by the Pasteur Institute of Côte d’Ivoire laboratory confirmed 101 cases (92.66%) of human rabies. Geographical distribution showed that cases of human rabies were recorded in 56 health district, and 64% (94) of the deceased lived in rural areas. The main causes of the occurrence of rabies were essentially non-use of post-exposure prophylaxis (PEP) and missed vaccination due to ignorance. Conclusion: In view of these results, control strategies and interventions need to be adapted to the epidemiological characteristics of the disease, using a community-based approach with a view to eliminating dog-transmitted rabies by 2030.
文摘This paper proposes a novel approach for generating 3-dimensional complex geological facies models based on deep generative models.It can reproduce a wide range of conceptual geological models while possessing the flexibility necessary to honor constraints such as well data.Compared with existing geostatistics-based modeling methods,our approach produces realistic subsurface facies architecture in 3D using a state-of-the-art deep learning method called generative adversarial networks(GANs).GANs couple a generator with a discriminator,and each uses a deep convolutional neural network.The networks are trained in an adversarial manner until the generator can create "fake" images that the discriminator cannot distinguish from "real" images.We extend the original GAN approach to 3D geological modeling at the reservoir scale.The GANs are trained using a library of 3D facies models.Once the GANs have been trained,they can generate a variety of geologically realistic facies models constrained by well data interpretations.This geomodelling approach using GANs has been tested on models of both complex fluvial depositional systems and carbonate reservoirs that exhibit progradational and aggradational trends.The results demonstrate that this deep learning-driven modeling approach can capture more realistic facies architectures and associations than existing geostatistical modeling methods,which often fail to reproduce heterogeneous nonstationary sedimentary facies with apparent depositional trend.
基金sponsored by Ministry of Science and Technology of China (grant No. 2009CB219400)
文摘In recent years, deep water areas have become popular exploration fields because of their abundant hydrocarbon resource potential. There are only relatively poor planar seismic profiles and no wells for deepwater areas of the Lingshui Formation in the Qiongdongnan Basin. A lot of faults developed and strata are fragmented due to high temperatures and high pressure, and this has resulted in dim sequence boundaries. Based on seismic data of the deepwater area and well data of bordering shallow water areas, Lingshui Formation was divided into four third class sequences; namely SI, SII, SIII and SIV, and the three-dimensional isochronous stratigraphic framework of the Lingshui Formation in the studied area was shaped. Based mainly on seismic attributes such as amplitude, continuity, internal structure and external shape, six typical seismic facies were identified, including mat-shaped, filling, wedge-shaped, foreset, moundy-shaped and lenticular-shaped, and a seismic facies distribution map was subsequently drawn. With studies on wells of bordering shallow water areas, regional sedimentary characteristics, and isopach map as references, sedimentary planar distribution features were analyzed. The deepwater area of the Lingshui Formation has mainly developed littoral and shallow sea. Sandstone bodies of fan delta, braided river delta, slope fan, basin floor fan, and turbidite fan are at an interdigitate junction to marine hydrocarbon source rocks and thus are favorable prospecting targets.
文摘This paper presents the primary results of petrologic, mineralogical and petrochemical studies of garnet-bearing granulite facies rock xenoliths from Xinyang, Henan Province. These xenoliths, which are found in a pipe of late Mesozoic volcaniclastic breccia, are of high density (3.13–3.30 g/cm3) and high seismic velocity (Vp = 7.04–7.31 km/s), being products of underplating of basaltic magmas and had experienced granulite facies metamorphism. The underplating and metamorphism took place before the eruption of the host rock. Petrographical studies and equilibrium T-P calculations show that these xenoliths were captured at a 49 km depth and experienced at least a 16 km uplift before they were captured. The dynamics of the uplift could be related to the continent-continent collision between the North China plate and the Yangtze plate during the Triassic.
文摘Molar tooth structure (MTS) represented by complex ptygmatical shapes is widely distributed in the Proterozoic of the world. MTS filled by fine, equant sparry calcite (or dolomite) displays an abrupt contact with hosting rocks, which are mainly composed of carbonaceous micrites and fine-grained carbonates with local silts and stormdominated deposits with graded, cross or wave beddings, numerous erosional surfaces and truncated and fills or guttered bases. Occurrence of MTS suggests a result of the constraint of sedimentary facies, and the storm-base in ramp settings is the maximum depth for the formation of MTS. Vertical succession of MTS-bearing carbonates shows a deposition stacked by high-frequency shallow subtidal and peritidal cycles. An individual cyclic MTS-bearing sequence is characterized by thinning, shallowing and dynamic decreasing-upward, and peritidal caps of purple red iron and organic carbonaceous sediments with more complicated shapes of MTS are common on the top of individual MTS-bearing sequences.
基金ThestudyisjointlysupportedbyNationalNaturalScienceFoundationofChina (No .4980 2 0 1 2 )andMinistryofSciencesandTechnology (SSER
文摘Different genetic types of meter-scale cyclic sequences in stratigraphic records result from episodic accumulation of strata related to Milankovitch cycles. The distinctive fabric natures of facies succession result from the sedimentation governed by different sediment sources and sedimentary dynamic conditions in different paleogeographical backgrounds, corresponding to high-frequency sea-level changes. Naturally, this is the fundamental criterion for the classification of genetic types of meter-scale cyclic sequences. The widespread development in stratigraphic records and the regular vertical stacking patterns in long-term sequences, the evolution characters of earth history and the genetic types reflected by specific fabric natures of facies successions in different paleogeographical settings, all that show meter-scale cyclic sequences are not only the elementary working units in stratigraphy and sedimentology, but also the replenishment and extension of parasequence of sequence stratigraphy. Two genetic kinds of facies succession for meter-scale cyclic sequence in neritic-facies strata of carbonate and clastic rocks, are normal grading succession mainly formed by tidal sedimentation and inverse grading succession chiefly made by wave sedimentation, and both of them constitute generally shallowing upward succession, the thickness of which ranges from several tens of centimeters to several meters. The classification of genetic types of meter-scale cyclic sequence could be made in terms of the fabric natures of facies succession, and carbonate meter-scale cyclic sequences could be divided into four types: L-M type, deep-water asymmetrical type, subtidal type and peritidal type. Clastic meter-scale cyclic sequences could be grouped into two types: tidal-dynamic type and wave-dynamic type. The boundaries of meter-scale cyclic sequences are marked by instantaneous punctuated surface formed by non-deposition resulting from high-frequency level changes, which include instantaneous exposed punctuated surface, drowned punctuated surface as well as their relative surface. The development of instantaneous punctuated surface used as the boundary of meter-scale cyclic sequence brings about the limitations of Walter's Law on the explanation of facies distribution in time and space, and reaffirm the importance of Sander's Rule on analysis of stratigraphic records. These non-continuous surface could be traced for long distance and some could be correlative within same basin range. The study of meter-scale cyclic sequences and their regularly vertical stacking patterns in long-term sequences indicate that the research into cyclicity of stratigraphic records is a useful way to get more regularity from stratigraphic records that are frequently complex as well as non-integrated.
文摘With continuous outcrops, developed shoal facies rocks, complete types of diagenesis and changeable diagenetic environments, Cambrian strata are well developed in the Xiadong area, Yichang, Hubei Province. Under the combined influence of numerous diageneses, secondary pores can be formed, which result in better reservoir properties of the rock strata.
基金Project(SQ2013CB021013)supported by the National Key Basic Research Program of ChinaProject(41002045)supported by the National Natural Science Foundation of China
文摘A systematic analysis of southwestern Ordos Basin's sedimentary characteristics,internal architectural element association styles and depositional model was illustrated through core statistics,well logging data and outcrop observations in Chang 8 oil-bearing group.This analysis indicates that shallow water delta sediments dominated by a fluvial system is the primary sedimentary system of the Chang 8 oil-bearing group of the Yanchang Formation in southwestern Ordos Basin.Four microfacies with fine grain sizes are identified: distributary channels,sheet sandstone,mouth bar and interdistributary fines.According to the sandbody's spatial distribution and internal architecture,two types of sandbody architectural element associations are identified: amalgamated distributary channels and thin-layer lobate sandstone.In this sedimentary system,net-like distributary channels at the delta with a narrow ribbon shape compose the skeleton of the sandbody that extends further into the delta front and shades into contiguous lobate distribution sheet sandstone in the distal delta front.The mouth bar is largely absent in this system.By analyzing the palaeogeomorphology,the palaeostructure background,sedimentary characteristics,sedimentary facies types and spatial distribution of sedimentary facies during the Chang 8 period,a distinctive depositional model of the Chang 8 shallow water fluvial-dominated delta was established,which primarily consists of straight multi-phase amalgamated distributary channels in the delta plain,net-like distributary channels frequently diverting and converging in the proximal delta front,sheet sandstones with dispersing contiguous lobate shapes in the distal delta front,and prodelta or shallow lake mudstones.
文摘The formation and distribution of hydrocarbon accumulations are jointly controlled by "stratigraphic facies" and "fluid potential", which can be abbreviated in "control of facies/potential on hydrocarbon accumulation". Facies and potential control the time-space distribution of hydrocarbon accumulation macroscopically and the petroliferous characteristics of hydrocarbon accumulation microscopically. Tectonic facies and sedimentary facies control the time-space distribution. Lithofacies and petrophysical facies control the petroliferous characteristics. Favorable facies and high porosity and permeability control hydrocarbon accumulation in the lacustrine rift basins in China. Fluid potential is represented by the work required, which comprises the work against gravity, pressure, interfacial energy and kinetic energy. Hydrocarbon migration and accumulation are controlled by the joint action of multiple driving forces, and are characterized by accumulation in the area of low potential. At the structural high, low geopotential energy caused by buoyancy control anticlinal reservoir. The formation oflithological oil pool is controlled by low interfacial energy caused by capillary force. Low compressive energy caused by overpressure and faulting activity control the formation of the faulted- block reservoir. Low geopotential energy of the basin margin caused by buoyancy control stratigraphic reservoir. The statistics of a large number of oil reservoirs show that favorable facies and low potential control hydrocarbon accumulation in the rift basin, where over 85% of the discovered hydrocarbon accumulations are distributed in the trap with favorable facies and low potentials. The case study showed that the prediction of favorable areas by application of the near source-favorable facies-low potential accumulation model correlated well with over 90% of the discovered oil pools' distribution of the middle section of the third member of the Shahejie Formation in the Dongying Depression, Bohai Bay Basin.
基金funded by the National Science and Technology Major Project(grant No.2016ZX05052)the National Natural Science Foundation of China(grant No.41072102)
文摘Hydrothermal mineral assemblages and related hydrothermally enhanced fracturing are common in the Precambrian Dengying Formation of Central Sichuan Basin. Petrographic and geochemical analyses of core samples show that the hydrothermal dolomite reservoirs of Dengying Formation consist of four main types of pores in the reservoir facies. These include: 1) hydrothermal dissolution vug(or pore), 2) intercrystalline pore, 3) residual inter-breccia vug(or pore), and 4) enlarged dissolved-fracture. There are three different fabrics dolomite in hydrothermal dolomite reservoirs, namely, saddle dolomite, fine-medium dolomite and micritic dolomite. Micritic dolomite is the original lithology of host rock. Saddle dolomite with curved or irregular crystal faces was directly crystallized from hydrothermal fluids(average temperature 192°C). Fine-medium dolomites are the products of recrystallization of micritic dolomite, resulting in abnormal geochemical characteristics, such as slight depletion of δ^(18)O, significant enrichment of Mn-Fe and ^(87)Sr/^(86)Sr, and positive Eu anomaly. A model for the distribution of various hydrothermal dolomite reservoir facies is proposed here, which incorporates three fundamental geological controls: 1) extensional tectonics and tectono-hydrothermal events(i.e., the Xingkai Taphrogenesis of Late Sinian-Early Cambrian, and Emei Taphrogenesis of Late Permian), 2) hydrothermal fluid storage in clastic rocks with large thickness(e.g., Nanhua System of Chengjiang Formation and part of Doushantuo Formation), and 3) confining bed for hydrothermal fluids(such as, the shale in Qiongzhusi Formation). The supply of hydrothermal fluid is critical. Large basement-rooted faults and associated grid-like fracture system may function as the channels for upward migration of hydrothermal fluid flow. The intersection of the above-mentioned faults(including the conversion fault), especially transtensional sags above negative flower structures on wrench faults can serve as a key target for future hydrocarbon exploration.
基金funded by the National Natural Science Foundation of China(Nos.41776052,41476031)the China-ASEAN Maritime Cooperation Fund,the National Programme on Global Change and Air-Sea Interaction(No.GASI-GEOGE-03)the Open Research Fund of State Key Laboratory of Estuarine and Coastal Research(No.SKLEC-KF201506)
文摘River-mouth bar is a fundamental element to constitute a delta system, and its internal facies architectures are vital to reconstruct delta evolution history and study high-resolution sequence stratigraphy. Changxing Island is a representative mouth-bar complex in the modern Changjiang Delta. Its vertical stacked strata produced by delta progradation were first studied by detailed facies analysis of core CX03, and then a general facies architecture and evolution history of mouth-bar complexes in the modern Changjiang Delta were discussed through a comparative study of 5 different cores and historical charts. A progradational deltaic sequence has generally a similar internal facies architecture, composed of massive muddy deposits of prodelta and delta-front slope facies at the bottom, sand-dominated deposits of delta-front platform, inter-bar channel and mouth-bar facies at the middle, and heterolithic deposits of tidal flat and saltmarsh facies at the top. There is a significant time lag for the initial formation of channel-mouth bar systems between Chongming and Jiuduansha Islands. Compared with subtidal flats, sedimentation rates on intertidal flats were highly accelerated, potentially resulting from weakening wave and tidal strength over extensive intertidal flats and increasing human embankment activities in the last few centuries. These findings provide some new clues to understand modern and ancient mouth-bar evolution and resultant sequence strata in tide-dominated deltas.
基金funded by the China 973 Key Foundation Research Development Project(Grant No. 2001CB209108)China National Natural Science Foundation Program(Grant No.40802029)
文摘Exploration practices show that the Jurassic System in the hinterland region of the Junggar Basin has a low degree of exploration but huge potential, however the oil/gas accumulation rule is very complicated, and it is difficult to predict hydrocarbon-bearing properties. The research indicates that the oil and gas is controlled by structure facies belt and sedimentary system distribution macroscopically, and hydrocarbon-bearing properties of sand bodies are controlled by lithofacies and petrophysical facies microscopically. Controlled by ancient and current tectonic frameworks, most of the discovered oil and gas are distributed in the delta front sedimentary system of a palaeo-tectonic belt and an ancient slope belt. Subaqueous branch channels and estuary dams mainly with medium and fine sandstone are the main reservoirs and oil production layers, and sand bodies of high porosity and high permeability have good hydrocarbon-bearing properties; the facies controlling effect shows a reservoir controlling geologic model of relatively high porosity and permeability. The hydrocarbon distribution is also controlled by relatively low potential energy at the high points of local structure macroscopically, while most of the successful wells are distributed at the high points of local structure, and the hydrocarbon-bearing property is good at the place of relatively low potential energy; the hydrocarbon distribution is in close connection with faults, and the reservoirs near the fault in the region of relatively low pressure have good oil and gas shows; the distribution of lithologic reservoirs at the depression slope is controlled by the distribution of sand bodies at positions of relatively high porosity and permeability. The formation of the reservoir of the Jurassic in the Junggar Basin shows characteristics of favorable facies and low-potential coupling control, and among the currenffy discovered reservoirs and industrial hydrocarbon production wells, more than 90% are developed within the scope of facies- potential index FPI〉0.5, while the FPI and oil saturation of the discovered reservoir and unascertained traps have relatively good linear correlation. By establishing the relation model between hydrocarbon- bearing properties of traps and FPI, totally 43 favorable targets are predicted in four main target series of strata and mainly distributed in the Badaowan Formation and the Sangonghe Formation, and the most favorable targets include the north and east of the Shinan Sag, the middle and south of the Mobei Uplift, Cai-35 well area of the Cainan Oilfield, and North-74 well area of the Zhangbei fault-fold zone.
基金Institute of Hydrocarbon Recovery, Universiti Teknology PETRONAS and Petroliam Nasional Berhad, Malaysia Oil and Gas Company for funding this research project (YUTP cost # 0153AA-E79)
文摘Advances in photogrammetry have eased the acquisition of high-resolution digital information from outcrops, enabling faster, non-destructive data capturing and improved reservoir modeling. Geocellular models for flow dynamics with in the virtual outcrop in siliciclastic deposits at different sets of sandstone facies architecture remain, however, a challenge. Digital maps of bedding, lithological contrast, spatial-temporal variations of bedding and permeability characteristics make it more easy to understand flow tortuosity in a particular architecture. An ability to precisely model these properties can improve reservoir characterization and flow modeling at different scales. Here we demonstrate the construction of realistic 2 D sandstone facies based models for a pragmatic simulation of flow dynamics using a combination of digital point clouds dataset acquired from LiDAR and field investigation of the Sandakan Formation, Sabah, Borneo.Additionally, we present methods for enhancing the accuracy of outcrop digital datasets for producing high resolution flow simulation. A well-exposed outcrop from the Sandakan Formation, Sabah, northwest Borneo having a lateral extent of 750 m was chosen in order to implement our research approach. Sandstone facies and its connectivity are well constrained by outcrop observations, data from air-permeability measurements, bilinear interpolation of permeability, grid construction and water vector analysis for flow dynamics.These proportions were then enumerated in terms of static digital outcrop model(DOM) and facies model based on sandstone facies bedding characteristics. Flow simulation of water vector analysis through each of the four sandstone facies types show persistent spatial correlation of permeability that align with either cross-bedded orientation or straight with more dispersion high quality sandstone(porosity 21.25%-41.2%and permeability 1265.20-5986.25 mD) and moderate quality sandstone(porosity 10.44%-28.75% and permeability 21.44-1023.33 mD). Whereas, in more heterolithic sandstone(wavy-to flaser-bedded and bioturbated sandstone), lateral variations in permeability show spatially non-correlated patterns over centimeters to tens of meters with mostly of low quality sandstone(porosity 3.4%-12.31% and permeability < 1 mD to 3.21 mD). These variations reflect the lateral juxtaposition in flow dynamics. It has also been resulted that the vertical connectivity and heterogeneities in terms of flow are mostly pragmatic due to the interconnected sandstone rather than the quality of sandstone.
基金supported by Natural Science Foundation Project of CQ CSTC (Grant No. 2009BB7383)National Natural Science Foundation of China (Grant No. 41102066, 40972084)Opening Foundation of the State Key Laboratory of Ore Deposit Geochemistry, Institute of Geochemistry, Chinese Academy of Sciences
文摘The Biluo Co and Amdo 114 station, northern Tibet, cropping out the Early Toarcian and Middle-Late Tithonian (Jurassic) organic-rich black shales, have been a focus to petroleum geologists in discussing their oil-producing potential. This paper first reports the trace elements and rare earth elements to discuss the paleoenvironments, redox conditions and sedimentary mechanisms of those black shales. Both sections exhibit variation in trace element abundances with concentrations 〈0.1 ppm to 760 ppm, mostly enriched in V, Cr, Ni, Cu, Zn, Mo, Ba and U. Element ratios of Ni/Co, V/Cr, U/Th and V/(V+Ni) plus U were used to identify redox conditions. The shale-normalized rare earth element (REE) patterns are characterized by the flat-shale type with instable Ce anomalies and very weekly positive Eu anomalies. Positive Ceanom values are significant with values varying between - 0.064 and 0.029 in Biluo Co, which may be interpreted as release of REE and input of riverine terrestrial matter with rich Ce (resulting in pH change) during the anoxic conditions. In the middle parts of Amdo 114 station, distinct negative Ceanom values are observed (-0.238 to -0.111) and associated surface water warming were interpreted as being related to a major sea level rise. In contrast, the formation of the black shales in the lower and upper part of the studied succession took place during a cooler (Ceanom values 〉-0.10), lower surface water productivity, and lower sea-level stage. Thus, we emphasize the role of different factors that control the formation of local and regional black shales. The most important factors are sea-level fluctuations and increasing productivity.
基金supported by the Project of the Mesozoic Tectonic Lithofacies Paleogeographic Mapping and Synthesize Research in Qinghai-Tibet Plateau, China Geological Survey(CGS),Ministry of Land and Resources, Project No-1212010610101the Project of the Typical Stratigraphical Sections Research in Qinghai-Tibet Plateau,CGS , Project No-1212011121257
文摘The Triassic petrostratigraphic system and chronologic stratigraphic sketch have been updated and perfected in the Qiangtang area, Qinghai-Tibet Plateau based on the integrated 1:250000 regional geological survey and the latest research progeny. The first finished 1:3000000 Triassic tectonic lithofacies paleogeographic maps in the Qiangtang area shows that the Triassic tectonic unit in the Qiangtang area can been divided into three parts from north to south: northern Qiangtang block; Longmucuo-Shuanghu suture zone; and southern Qiangtang block. The early-middle Triassic tectonic paleogeography in the Qiangtang area is divides into three sub- units: northern Qiangtang passive continental marginal basin (NQPB), Longmucuo- Shuanghu residual basin (LSRB) and southern Qiangtang residual basin (SQRB). The NQPB can be subdivided into four paleogeography units: The Tanggula-Zangxiahe shallow and bathyal sea; The Wangquanhe- Yingshuiquan carbonate platform; The Rejuechaka-Jiangaidarina littoral- shallow sea; and Qiangtang central uplift. The above units of The NQPB possess EW trend, geomorphology high in the south and low in the north, the seawater depth northward. The basinal paleo-current direction is unidirectional, and basinal tectonic subsidence center is in accord with the depo-center, located in the Tanggula-Zangxiahe belt, north of the basin. The sedimentation and tectonic evolution of the NQPB are characterized with passive continental marginal basin. The Qiangtang central orogenic denuded area (ancient land) may be as a sedimentary materials source of the NQPB. SQRB can be divided into two units: Duoma carbonate platform and southern Qiangtang neritic-deep sea. The late Triassic tectonic paleogeography in the Qiangtang area is the framework of the "archipelagic-sea" as a whole, and it may be divided into three sub-units: northern Qiangtang back- arc foreland basin(NQFB), Longmucuo-Shuanghu residual basin(LSRB) and southern Qiangtang marginal-sea basin(SQMB). Thereinto, NQFB can be divided into five paleogeography units: the Zangxiahe-Mingjinghu bathyal basin characterized with the flysch; the Tanggula shallow-sea shelf with the fine-clastics; the Juhuashang platform with carbonates; the Tumenggela-Shuanghu coastal- delta with coal-bearing clastics and the Nadigangri- Geladandong arc with volcanics and tuffs. In transverse section, the NQFB fills is wedge-shaped, and the sediments characterized with thicker in north and thinner in south, and with double materials derived from the Ruolagangri orogenic belt in north and the Shuanghu central orogenic belt in south. The late Triassic depocenter of NQFB is located in the middle of the basin, the Yakecuo-Bandaohu-Quemocuo belt, but the subsidence center in the north, the Zangxiahe- Mingjinghu belt, and basinal tectonic subsidence center not concordant with the depo-center. Late Triassic, the SQMB may be divided into three sub-units: Xiaochaka shallow-sea; Riganpeicuo platform~ and South Qiangtang southern bathyal basin. In transverse section, the basement of the SQMB is characterized with low in the northern and southern, but high in the middle; forming wedge shaped sediments with thicker in the north and thinner in the south; the sedimentary materials derived from the Qiangtang central uplift and Nadigangri arcs in north. The late Triassic subsidence centre of the SQMB is located in the northern (Xiaochaka area), but the depocenter in the southern (Qixiancuo Suobucha area). The sedimentation and tectonic evolution of the SQMB are characterized with marginal sea.