Environmental requirements world wide and in the P.R.of China in particular have increased and authorities are increasing the pressure on steelmakers to comply with always more stringent limits and standards. Modern c...Environmental requirements world wide and in the P.R.of China in particular have increased and authorities are increasing the pressure on steelmakers to comply with always more stringent limits and standards. Modern converter steel making goes along with the innovation and new developments not only for the primary converter process itself but even more for the dedusting technologies.This paper describes the benefits and latest development of advanced off gas cleaning and recovery systems based on dry type cleaning with electrostatic precipitation and wet type gas cleaning based on wet scrubbers.Modern converter dedusting is based on suppressed combustion systems in order to reduce off gas amounts and to be able to use the gas for gas recovery.The dry type primary off gas treatment system based on electrostatic precipitator technology is the most advanced environmental solution available for converter steel making.Dry dedusting has been introduced in China successfully with a significant contribution by Siemens VAI being the market leader for converter dry dedusting systems.Siemens VAI has introduced several design improvements over the last years such as CFD modeling of flow conditions in evaporation cooler,design of chains for dust conveyors,design of ESP inlet,design and thickness of discharge electrodes and operation in energy saving mode.Additionally the DDS process has been successfully implemented in China for the De-P process.The gas recovery system for DDS has been optimized over the years with high quality equipment and integrated automation and control systems.Wet type dedusting for converter gas is a well proven technology for many years and is still widely used due to the simplicity of the process and the lower investment costs.SVAI has continuously improved it's wet dedusting technologies to provide highly energy efficient systems which can achieve lowest levels of clean gas dust while still maintaining a moderate water and energy consumption with simplified process control and standardized process control packages.Main design and process improvements include expansion joints for connection of scrubber to cooling stack,new type of droplet separator,advanced hood pressure control package,ID fan washing system,ID fan speed control system etc.The focus for wet type gas recovery systems is still on maximum safety and reliability.SVAI has also successfully improved the technological packages for converter gas recovery for wet type dedusting systems.The comparison between the two system shows the advantages of dry dedusting mainly being the lowest clean gas dust content, lower operating costs,easier handling for recycling of residuals and no need for a water treatment plants.Wet type dedusting has it's main advantages in the simple process and operation of the system,the flexible layout solutions inside the steel shop as well as generally lower investment costs.An overview on the numerous reference installations for dry- and wet type dedusting systems in China as well as world wide is given.展开更多
The results from three methods aimed at improving precipitation type(e.g., rain, sleet, and snow) estimation are presented and compared in this paper. The methods include the threshold air temperature(AT), threshold w...The results from three methods aimed at improving precipitation type(e.g., rain, sleet, and snow) estimation are presented and compared in this paper. The methods include the threshold air temperature(AT), threshold wet bulb temperature(WBT) and Koistinen and Saltikoff(KSS) methods.Dot graphs are plotted to acquire the threshold air temperature or the threshold wet bulb temperature using daily averaged air temperature, wet bulb temperature and precipitation data at 643 stations from 1961 to 1979(precipitation types are not labeled in the database from 1980 to present) in China. The results indicate that the threshold AT or WBT methods are not able to differentiate rain, sleet and snow in the most regions in China; sleet is difficult to differentiate from other precipitation types based on the two threshold methods. Therefore, one threshold AT and WBT method was used in this study to differentiate rain and snow. Based on GaussianKriging interpolation of threshold air temperature(T0and wet bulb temperature(Tw), the T0 and Tw contour lines and contour surfaces are calculated for China.Finally, a comparison between the KSS, AT and WBT methods are provided in which the KSS method is calculated based on air temperature and relative humidity. The results suggest that the KSS method is more appropriate for water phase estimation than are the other methods; the maximum precision for rain and snow is 99% and 94%, respectively. The AT method performs better than the WBT method when the critical air temperature is 2°C.展开更多
Fall velocity–diameter relationships for four different snowflake types（dendrite,plate,needle,and graupel） were investigated in northeastern South Korea,and a new algorithm for classifying hydrometeors is proposed ...Fall velocity–diameter relationships for four different snowflake types（dendrite,plate,needle,and graupel） were investigated in northeastern South Korea,and a new algorithm for classifying hydrometeors is proposed for distrometric measurements based on the new relationships.Falling ice crystals（approximately 40 000 particles） were measured with a two-dimensional video disdrometer（2DVD） during a winter experiment from 15 January to 9 April 2010.The fall velocity–diameter relationships were derived for the four types of snowflakes based on manual classification by experts using snow photos and 2DVD measurements：the coefficients（exponents） for different snowflake types were 0.82（0.24） for dendrite,0.74（0.35） for plate,1.03（0.71） for needle,and 1.30（0.94） for graupel,respectively.These new relationships established in the present study（PS） were compared with those from two previous studies.Hydrometeor types were classified with the derived fall velocity–diameter relationships,and the classification algorithm was evaluated using 3 × 3 contingency tables for one rain–snow transition event and three snowfall events.The algorithm showed good performance for the transition event：the critical success indices（CSIs） were 0.89,0.61 and 0.71 for snow,wet-snow and rain,respectively.For snow events,the algorithm performance for dendrite and plate（CSIs = 1.0 and 1.0,respectively） was better than for needle and graupel（CSIs = 0.67 and 0.50,respectively）.展开更多
文摘Environmental requirements world wide and in the P.R.of China in particular have increased and authorities are increasing the pressure on steelmakers to comply with always more stringent limits and standards. Modern converter steel making goes along with the innovation and new developments not only for the primary converter process itself but even more for the dedusting technologies.This paper describes the benefits and latest development of advanced off gas cleaning and recovery systems based on dry type cleaning with electrostatic precipitation and wet type gas cleaning based on wet scrubbers.Modern converter dedusting is based on suppressed combustion systems in order to reduce off gas amounts and to be able to use the gas for gas recovery.The dry type primary off gas treatment system based on electrostatic precipitator technology is the most advanced environmental solution available for converter steel making.Dry dedusting has been introduced in China successfully with a significant contribution by Siemens VAI being the market leader for converter dry dedusting systems.Siemens VAI has introduced several design improvements over the last years such as CFD modeling of flow conditions in evaporation cooler,design of chains for dust conveyors,design of ESP inlet,design and thickness of discharge electrodes and operation in energy saving mode.Additionally the DDS process has been successfully implemented in China for the De-P process.The gas recovery system for DDS has been optimized over the years with high quality equipment and integrated automation and control systems.Wet type dedusting for converter gas is a well proven technology for many years and is still widely used due to the simplicity of the process and the lower investment costs.SVAI has continuously improved it's wet dedusting technologies to provide highly energy efficient systems which can achieve lowest levels of clean gas dust while still maintaining a moderate water and energy consumption with simplified process control and standardized process control packages.Main design and process improvements include expansion joints for connection of scrubber to cooling stack,new type of droplet separator,advanced hood pressure control package,ID fan washing system,ID fan speed control system etc.The focus for wet type gas recovery systems is still on maximum safety and reliability.SVAI has also successfully improved the technological packages for converter gas recovery for wet type dedusting systems.The comparison between the two system shows the advantages of dry dedusting mainly being the lowest clean gas dust content, lower operating costs,easier handling for recycling of residuals and no need for a water treatment plants.Wet type dedusting has it's main advantages in the simple process and operation of the system,the flexible layout solutions inside the steel shop as well as generally lower investment costs.An overview on the numerous reference installations for dry- and wet type dedusting systems in China as well as world wide is given.
基金supported by National asic Research Program of China (Grant Nos. 013CBA01806)National Natural Sciences oundation of China (Grant Nos. 91025011, 1222001)
文摘The results from three methods aimed at improving precipitation type(e.g., rain, sleet, and snow) estimation are presented and compared in this paper. The methods include the threshold air temperature(AT), threshold wet bulb temperature(WBT) and Koistinen and Saltikoff(KSS) methods.Dot graphs are plotted to acquire the threshold air temperature or the threshold wet bulb temperature using daily averaged air temperature, wet bulb temperature and precipitation data at 643 stations from 1961 to 1979(precipitation types are not labeled in the database from 1980 to present) in China. The results indicate that the threshold AT or WBT methods are not able to differentiate rain, sleet and snow in the most regions in China; sleet is difficult to differentiate from other precipitation types based on the two threshold methods. Therefore, one threshold AT and WBT method was used in this study to differentiate rain and snow. Based on GaussianKriging interpolation of threshold air temperature(T0and wet bulb temperature(Tw), the T0 and Tw contour lines and contour surfaces are calculated for China.Finally, a comparison between the KSS, AT and WBT methods are provided in which the KSS method is calculated based on air temperature and relative humidity. The results suggest that the KSS method is more appropriate for water phase estimation than are the other methods; the maximum precision for rain and snow is 99% and 94%, respectively. The AT method performs better than the WBT method when the critical air temperature is 2°C.
基金funded by the Korea Meteorological Administration Research and Development Program under Grant KMIPA2015-1010
文摘Fall velocity–diameter relationships for four different snowflake types（dendrite,plate,needle,and graupel） were investigated in northeastern South Korea,and a new algorithm for classifying hydrometeors is proposed for distrometric measurements based on the new relationships.Falling ice crystals（approximately 40 000 particles） were measured with a two-dimensional video disdrometer（2DVD） during a winter experiment from 15 January to 9 April 2010.The fall velocity–diameter relationships were derived for the four types of snowflakes based on manual classification by experts using snow photos and 2DVD measurements：the coefficients（exponents） for different snowflake types were 0.82（0.24） for dendrite,0.74（0.35） for plate,1.03（0.71） for needle,and 1.30（0.94） for graupel,respectively.These new relationships established in the present study（PS） were compared with those from two previous studies.Hydrometeor types were classified with the derived fall velocity–diameter relationships,and the classification algorithm was evaluated using 3 × 3 contingency tables for one rain–snow transition event and three snowfall events.The algorithm showed good performance for the transition event：the critical success indices（CSIs） were 0.89,0.61 and 0.71 for snow,wet-snow and rain,respectively.For snow events,the algorithm performance for dendrite and plate（CSIs = 1.0 and 1.0,respectively） was better than for needle and graupel（CSIs = 0.67 and 0.50,respectively）.
