On the Polygonal Wear Evolution of Heavy-Haul Locomotive Wheels due to Wheel/Rail Flexibility and Its Mitigation Measures

Wheel polygonal wear can immensely worsen wheel/rail interactions and vibration performances of the train and track,and ultimately,lead to the shortening of service life of railway components.At present,wheel/rail medium-or high-frequency frictional interactions are perceived as an essential reason of the high-order polygonal wear of railway wheels,which are potentially resulted by the flexible deformations of the train/track system or other external excitations.In this work,the effect of wheel/rail flexibility on polygonal wear evolution of heavy-haul locomotive wheels is explored with aid of the long-term wheel polygonal wear evolution simulations,in which different flexible modeling of the heavy-haul wheel/rail coupled system is implemented.Further,the mitigation measures for the polygonal wear of heavy-haul locomotive wheels are discussed.The results point out that the evolution of polygonal wear of heavy-haul locomotive wheels can be veritably simulated with consideration of the flexible effect of both wheelset and rails.Execution of mixed-line operation of heavy-haul trains and application of multicut wheel re-profiling can effectively reduce the development of wheel polygonal wear.This research can provide a deep-going understanding of polygonal wear evolution mechanism of heavy-haul locomotive wheels and its mitigation measures.

Experimental Study on Wear and Spalling Behaviors of Railway Wheel

The current researches of the wear and spalling behaviors of wheel/rail materials focus on the field investigation rather than the mechanism. However, it is necessary and significant for clarifying the mechanism and relationship between the wear and spalling damage of railway wheel to test and reproduce the wheel damages in laboratory. The objective of this paper is to investigate the wear and spalling damage behaviors of railway wheel using a JD-1 wheel/rail simulation facility, which consists of a small wheel serving as rolling stock wheel, and a larger wheel serving as rail. The damage process of wheel roller is explored in terms of the creep ratio, axle load, and carbon content by means of various microscopic examinations. The experimental results show that the wear volume growth of wheel roller is proved to be proportional to the increase of the creep ratio and normal load between simulating wheel and rail. The increase of carbon content of wheel material causes a linear reduction in the wear volume. The microscopic examinations indicate that the rolling wear mechanism transfers from abrasive wear to adhesive and fatigue wear with an increase of tangential friction force, which results in the initiation of fatigue crack, and then aggravates spalling damage on the wheel roller surface. The surface hardness of material depends strongly upon its carbon content. The decrease of the carbon content of wheel material may alleviate spalling damage, but can cause a significant growth in the wear volume of wheel roller. Therefore, there is a competitive relationship between the wear and spalling damage of wheel material. This research proposes an important measure for alleviating or preventing the wear and spalling damage of railway wheel material.

Simulation of wheel and rail profile wear:a review of numerical models

The development of numerical models able to compute the wheel and rail profile wear is essential to improve the scheduling of maintenance operations required to restore the original profile shapes.This work surveys the main numerical models in the literature for the evaluation of the uniform wear of wheel and rail profiles.The standard structure of these tools includes a multibody simulation of the wheel-track coupled dynamics and a wear module implementing an experimental wear law.Therefore,the models are classified according to the strategy adopted for the worn profile update,ranging from models performing a single computation to models based on an online communication between the dynamic and wear modules.Nevertheless,the most common strategy nowadays relies on an iteration of dynamic simulations in which the profiles are left unchanged,with co-simulation techniques often adopted to increase the computational performances.Work is still needed to improve the accuracy of the current models.New experimental campaigns should be carried out to obtain refined wear coefficients and models,while strategies for the evaluation of both longitudinal and transversal wear,also considering the effects of tread braking,should be implemented to obtain accurate damage models.

Measured dynamic load distribution within the in situ axlebox bearing of high-speed trains under polygonal wheel–rail excitation

The dynamic load distribution within in-service axlebox bearings of high-speed trains is crucial for the fatigue reliability assessment and forward design of axlebox bearings. This paper presents an in situ measurement of the dynamic load distribution in the four rows of two axlebox bearings on a bogie wheelset of a high-speed train under polygonal wheel–rail excitation. The measurement employed an improved strain-based method to measure the dynamic radial load distribution of roller bearings. The four rows of two axlebox bearings on a wheelset exhibited different ranges of loaded zones and different means of distributed loads. Besides, the mean value and standard deviation of measured roller–raceway contact loads showed non-monotonic variations with the frequency of wheel–rail excitation. The fatigue life of the four bearing rows under polygonal wheel–rail excitation was quantitatively predicted by compiling the measured roller–raceway contact load spectra of the most loaded position and considering the load spectra as input.

Research on the strain gauge mounting scheme of track wheel force measurement system based on high-speed wheel/rail relationship test rig

Purpose-This paper aims to analyze the stress and strain distribution on the track wheel web surface and study the optimal strain gauge location for force measurement system of the track wheel.Design/methodology/approach-Finite element method was employed to analyze the stress and strain distribution on the track wheel web surface under varying wheel-rail forces.Locations with minimal coupling interference between vertical and lateral forces were identified as suitable for strain gauge installation.Findings-The results show that due to the track wheel web’s unique curved shape and wheel-rail force loading mechanism,both tensile and compressive states exit on the surface of the web.When vertical force is applied,Mises stress and strain are relatively high near the inner radius of 710 mm and the outer radius of 1110mmof the web.Under lateral force,high Mises stress and strain are observed near the radius of 670mmon the inner and outer sides of the web.As the wheel-rail force application point shifts laterally toward the outer side,the Mises stress and strain near the inner radius of 710 mm of the web gradually decrease under vertical force while gradually increasing near the outer radius of 1110 mm of the web.Under lateral force,the Mises stress and strain on the surface of the web remain relatively unchanged regardless of the wheel-rail force application point.Based on the analysis of stress and strain on the surface of the web under different wheel-rail forces,the inner radius of 870 mm is recommended as the optimal mounting location of strain gauges for measuring vertical force,while the inner radius of 1143 mm is suitable for measuring lateral force.Originality/value-The research findings provide valuable insights for determining optimal strain gauge locations and designing an effective track wheel force measurement system.

Numerical simulation of wheel wear evolution for heavy haul railway

The prediction of the wheel wear is a fundamental problem in heavy haul railway. A numerical methodology is introduced to simulate the wheel wear evolution of heavy haul freight car. The methodology includes the spatial coupling dynamics of vehicle and track, the three-dimensional rolling contact analysis of wheel-rail, the Specht's material wear model, and the strategy for reproducing the actual operation conditions of railway. The freight vehicle is treated as a full 3D rigid multi-body model. Every component is built detailedly and various contact interactions between parts are accurately simulated, taking into account the real clearances. The wheel-rail rolling contact calculation is carried out based on Hertz's theory and Kalker's FASTSIM algorithm. The track model is built based on field measurements. The material loss due to wear is evaluated according to the Specht's model in which the wear coefficient varies with the wear intensity. In order to exactly reproduce the actual operating conditions of railway,dynamic simulations are performed separately for all possible track conditions and running velocities in each iterative step.Dimensionless weight coefficients are introduced that determine the ratios of different cases and are obtained through site survey. For the wheel profile updating, an adaptive step strategy based on the wear depth is introduced, which can effectively improve the reliability and stability of numerical calculation. At last, the wear evolution laws are studied by the numerical model for different wheels of heavy haul freight vehicle running in curves. The results show that the wear of the front wheelset is more serious than that of the rear wheelset for one bogie, and the difference is more obvious for the outer wheels. The wear of the outer wheels is severer than that of the inner wheels. The wear of outer wheels mainly distributes near the flange and the root; while the wear of inner wheels mainly distributes around the nominal rolling circle. For the outer wheel of front wheelset of each bogie, the development of wear is gradually concentrated on the flange and the developing speed increases continually with the increase of traveled distance.

A critical review of wheel/rail high frequency vibration-induced vibration fatigue of railway bogie in China

Purpose–This review aims to give a critical view of the wheel/rail high frequency vibration-induced vibration fatigue in railway bogie.Design/methodology/approach–Vibration fatigue of railway bogie arising from the wheel/rail high frequency vibration has become the main concern of railway operators.Previous reviews usually focused on the formation mechanism of wheel/rail high frequency vibration.This paper thus gives a critical review of the vibration fatigue of railway bogie owing to the short-pitch irregularities-induced high frequency vibration,including a brief introduction of short-pitch irregularities,associated high frequency vibration in railway bogie,typical vibration fatigue failure cases of railway bogie and methodologies used for the assessment of vibration fatigue and research gaps.Findings–The results showed that the resulting excitation frequencies of short-pitch irregularity vary substantially due to different track types and formation mechanisms.The axle box-mounted components are much more vulnerable to vibration fatigue compared with other components.The wheel polygonal wear and rail corrugation-induced high frequency vibration is the main driving force of fatigue failure,and the fatigue crack usually initiates from the defect of the weld seam.Vibration spectrum for attachments of railway bogie defined in the standard underestimates the vibration level arising from the short-pitch irregularities.The current investigations on vibration fatigue mainly focus on the methods to improve the accuracy of fatigue damage assessment,and a systematical design method for vibration fatigue remains a huge gap to improve the survival probability when the rail vehicle is subjected to vibration fatigue.Originality/value–The research can facilitate the development of a new methodology to improve the fatigue life of railway vehicles when subjected to wheel/rail high frequency vibration.

Wheel wear comparison between motor car and trailer of intercity train

To analyze wheel wear discrepancy between motor car and trailer of an intercity train,a novel wheel wear rates calculation model was proposed,which was composed of the intercity train dynamics model,wheel-rail three-dimensional rolling contact FEM model and the wear model.The simulated results were contrasted with measured results in field test.The simulated results showed the motor car wheels had larger rotation rate and longitudinal creepage than the trailer wheels.Meanwhile,the motor car wheels encountered larger vertical forces and longitudinal forces from bogie because of the heavier car body and the impact of traction torque.The traction torque acting on motor car wheel could increase the slip rates in the rear part of wheel contact patch and weaken the spinning phenomenon of relative slip.Larger contact pressure and slip rates caused the higher wear rates of motor car wheel than those of trailer wheel.The overall trends of wheel wear depth in simulated and tested results were similar.And they both showed the motor car wheel encountered the more serious wear than the trailer wheel.These models can be used to study the effect of the traction characteristics curves on the wear of wheel.

Research on Wheel Rail Wear for a 140 t Open Type Hot Metal Car

To maintain the safety of an open-type hot-metal car and to reduce wheel-rail wear during transportation, simulation models of the main components of such car were built using Pro/E software and then tested. In particular, the Pro/E models were imported into ADAMS/Rail for assembly and then used to construct a complete hot-metal car dynamic model. Locomotive wheel-rail attack angle, wheel-rail lateral force, and wear index were used as evaluation parameters during the simulation to analyze the effects of bogie parameter, rail parameter, and speed of the hot-metal car on wheel-rail wear. An improvement scheme for reducing wheel-rail wear was proposed based on the result of the dynamic simulation, wherein wheel-rail wear and curving performance were analyzed and compared. The simulation provided an important reference for evaluating and improving the dynamic performance of the hot-metal car. The applied effect showed that the improvement scheme is effective.

Influence of Angle of Attack and Lateral Force between Wheel and Rail on Wear of Rail ——a Laboratory Study

Angle of attack and lateral force are two important parameters influencing wheel rail wear. This paper deals with the question of influences of the angle of attack and the lateral force on the wear of rail. A series of experiments are conducted on 1/4 JD 1 Wheel/Rail Tribology Simulation Facility. The angles of attack selected in the tests are 0°16′30″, 0°37′40″ and 1°0′0″ respectively. The lateral forces selected in the tests are 0.694 kN, 1.250 kN and 2.083 kN, respectively corresponding to the lateral forces of 25 kN, 45 kN and 75 kN measured in the field, with the aim of keeping the same ratio of L/V between laboratory and field conditions. It is found that the larger the angle of attack is, the more serious the wear of rail is. The relation of rail wear rate versus angle of attack is non linear, and the relation of rail wear rate versus lateral force is approximately linear. The influence of angle of attack is more serious than that of lateral force. For the tractive wheelset, the wear index involving linear and quadratic function terms of angle of attack has good agreement with the limited experimental data. Some conclusions are given.

Wheel-rail Profiles Matching Design Considering Railway Track Parameters

The profile of wheel/rail has great concern with the vehicle running safety, the wheel/rail wear and the rolling contact fatigue between wheel and rail, due to its severer impact on the dynamic behavior of both the railway vehicle/track, and the wheel/rail rolling contact status. However, recent studies in this respect are mainly explored in reverse methods, where track parameters are predetermined and invariable during the optimizing process. This paper attempts to propose a wheel-rail profiles matching design method considering multi-parameter, through optimizing wheel/rail profile under different rail cants and track gauges, based on the existed optimization technology for the normal gap of wheel/rail. The method presented in this paper can also, compared with the prior reverse methods, be called ＂forward solution method＂ in which the riding comfort, wheel unloading rate and wheel/rail contact stress of the speed-up railway passenger car are calculated by means of a vehicle-track coupling dynamic model, with the range of the rail cant varying from 1/20 to 1/40 and the rail gauge from 1 433 mm to 1 441 mm. These results show that the distribution status of the pairs of contact points can be obviously improved and the contact stress can be reduced significantly; a great influence is exposed by the rail cant and track gauge on the dynamic behavior of the high speed passenger car, and an optimal vehicle dynamics behavior are obtained with the optimized wheel/rail profile when the rail cant is 1/30 and the track gauge is 1 435 mm. This research can provide important references for the investigation of the wheel-rail profiles matching design method considering multi-parameter.

Interaction of subway LIM vehicle with ballasted track in polygonal wheel wear development

This paper develops a coupled dynamics model for a linear induction motor （LIM） vehicle and a subway track to investigate the influence of polygonal wheels of the vehicle on the dynamic behavior of the system. In the model, the vehicle is modeled as a multi-body system with 35 degrees of freedom. A Timoshenko beam is used to model the rails which are discretely supported by sleepers. The sleepers are modeled as rigid bodies with their vertical, lateral, and rolling motions being considered. In order to simulate the vehicle running along the track, a moving sleeper support model is introduced to simulate the excitation by the discrete sleeper supporters, in which the sleepers are assumed to move backward at a constant speed that is the same as the train speed. The Hertzian contact theory and the Shen– Hedrick–Elkins’ model are utilized to deal with the normal dynamic forces and the tangential forces between wheels and rails, respectively. In order to better characterize the linear metro system （LMS）, Euler beam theory based on modal superposition method is used to model LIM and RP. The vertical electric magnetic force and the lateral restoring force between the LIM and RP are also taken into consideration. The former has gap-varying nonlinear characteristics, whilst the latter is considered as a constant restoring force of 1 kN. The numerical analysis considers the effect of the excitation due to polygonal wheels on the dynamic behavior of the system at different wear stages, in which the used data regarding the polygonal wear on the wheel tread are directly measured at the subway site.

Parameters studies for rail wear in high-speed railway turnouts by unreplicated saturated factorial design

Rail wear is one of the main reasons for reducing the service life of high-speed railway turnouts in China. The rail wear characteristics of high-speed railway turnouts are influenced by a large number of input parameters of the complex train-turnout system. To reproduce the actual operation conditions of railway turnouts, random distributions of these inputs need to be considered in rail wear simulation. For a given nominal layout of the high-speed railway turnout, 19 input parameters for rail wear simulation in high-speed railway turnouts are investigated based on orthogonal design of experiment. Three dynamic responses(wheel-rail friction work, normal contact force and size of contact patch) are defined as observed values and the significant factors(direction of passage, axle load, running speed, friction coefficient, and wheel and rail profiles) are determined by two unreplicated saturated factorial design methods, including the half-normal probability plot method and Dong 93 method. As part of the associated rail wear simulation, the influence of the wear models and the local elastic deformation on the rail wear was separately investigated. The calculation results for the wear models are quite different, especially for large creep mode. The local elastic deformation has a large effect on the sliding speed and rail wear and needs to be considered in the rail wear simulation.

ANALYSIS OF THERMAL-ELASTIC STRESS OF WHEEL-RAIL IN ROLLING-SLIDING CONTACT

A coupling thermo-mechanical model of wheel/rail in rolling-sliding contact is put forward using finite element method. The normal contact pressure is idealized as the Hertzian distribution, and the tangential force presented by Carter is used. In order to obtain thermal-elastic stress, the ther-mal-elastic plane stress problem is transformed to an elastic plane stress problem with equivalent fictitious thermal body force and fictitious boundary distributed force. The temperature rise and ther-mal-elastic stress of wheel and rail in rolling-sliding are analyzed. The non-steady state heat transfer between the contact surfaces of wheel and rail, heat-convection and radiation between the wheel/rail and the ambient are taken into consideration. The influences of the wheel rolling speed and wear rate on friction temperature and thermal-elastic stress are investigated. The results show the following： ① For rolling-sliding case, the thermal stress in the thin layer near the contact patch due to the friction temperature rise is severe. The higher rolling speed leads to the lower friction temperature rise and thermal stress in the wheel; ② For sliding case, the friction temperature and thermal stress of the wheel rise quickly in the initial sliding stage, and then get into a steady state gradually. The expansion of the contact patch, due to material wear, can affect the friction temperature rise and the thermal stress during wear process. The higher wear rate generates lower stress. The results can help under-stand the influence of friction temperature and thermal-elastic stress on wheel and rail damage.

Field investigation on effects of railway track geometric parameters on rail wear

Rail wear has dramatic impact on track performance, ride quality and maintenance costs. The amount of rail wear is influenced by various elements among which geometric parameters play an important role. The amount of wear in Iran’s railway lines and its imposed maintenance costs oblige us to make modifications on the various geometrical parameters. In order to ensure the effectiveness of these changes, it is necessary to investigate these parameters and their effects on the wear. This research is aimed at studying the effects of different track geometrical parameters on the vertical and lateral wear by conducting a three phase field investigation. The first phase was carried out at the switches of a station, the second phase at a straight line, and the third at a curved line out of the station. The results obtained are analyzed and the role of each track geometrical parameter in the rail wear is discussed. Recommendations for prevention or reduction of rail wear are presented.

Polygonisation of railway wheels:a critical review

Polygonisation is a common nonuniform wear phenomenon occurring in railway vehicle wheels and has a severe impact on the vehicle–track system,ride comfort,and lineside residents.This paper first summarizes periodic defects of the wheels,including wheel polygonisation and wheel corrugation,occurring in railways worldwide.Thereafter,the effects of wheel polygonisation on the wheel–rail interaction,noise and vibration,and fatigue failure of the vehicle and track components are reviewed.Based on the different causes,the formation mechanisms of periodic wheel defects are classified into three categories:(1)initial defects of wheels,(2)natural vibration of the vehicle–track system,and(3)thermoelastic instability.In addition,the simulation methods of wheel polygonisation evolution and countermeasures to mitigate wheel polygonisation are presented.Emphasis is given to the characteristics,effects,causes,and solutions of wheel polygonisation in metro vehicles,locomotives,and highspeed trains in China.Finally,the guidance is provided on further understanding the formation mechanisms,monitoring technology,and maintenance criterion of wheel polygonisation.

ONLINE GRINDING WHEEL WEAR COMPENSATION BY IMAGE BASED MEASURING TECHNIQUES

Automatic compensation of grinding wheel wear in dry grinding is accomplished by an image based online measurement method. A kind of PC-based charge-coupled device image recognition system is schemed out, which detects the topography changes of the grinding wheel surface. Profile data, which corresponds to the wear and the topography, is measured by using a digital image processing method. The grinding wheel wear is evalualed by analyzing the position deviation of the grinding wheel edge. The online wear compensation is achieved according to the measure results. The precise detection and automatic compensation system is integrated into an open structure CNC curve grinding machine. A practical application is carried out to fulfil the precision curve grinding. The experimental results confirm the benefits of the proposed techniques, and the online detection accuracy is less than 5 um. The grinding machine provides higher precision according to the in-process grinding wheel error compensation.

Vibro-acoustic Radiation Characteristics Analysis of Railway Vehicle Wheel with Damping Ridges Based on Modal Strain Energy

The existing researches on the damping wheel mainly focus on investigating the influence of damping structure change on the vibro-acoustic control.The changes include the geometric size of the damping structure,the damping material parameters,and the placement,and so on.In order to further understand the mechanism in reducing the acoustic radiation of railway wheel with layer damping treatment,in this paper,the wheel is simply modified by a full-sized circular plate.The circle plate side has stuck circumference constrained damping ridges and radial constrained damping ridges on it.Based on a hybrid finite element method-boundary element method（FEM-BEM）,the paper develops a vibro-acoustic radiation model for such a distributed constrained damping structure.The vibration and acoustic radiation of the circular plate is analyzed.In the analysis,the dynamic response of the system is obtained by using the 3D finite model superposition method.The obtained vibration response is used as the initial boundary condition in solving Helmholtz boundary integral equation for the sound radiation analysis.In the procedure,firstly,the modal analysis of the circular plate is performed to get the distribution of the system modal strain energy.Secondly,the vibro-acoustic radiation characteristics of the plate with different kinds of circumference damping ridges and radial damping ridges are compared in order to try to find the best effective damping ridge structure.Thirdly,using the distribution of the plate modal strain energy investigates the effect of the ridge distribution locations on the circular plate on its vibro-acoustic radiation.The calculation and analysis research results show that,the sticking circumference and radial damping ridges on the plate can control the vibro-acoustic radiation of the plate effectively in different frequency range.The distribution of the constrained damping ridge has an effect on reduction in vibro-acoustic radiation of the circular plate.The present research is very useful in the design of railway wheel with low noise level.

Effect of wheelset flexibility on wheel–rail contact behavior and a specific coupling of wheel–rail contact to flexible wheelset

The fexibility of a train＇s wheelset can have a large effect on vehicle–track dynamic responses in the medium to high frequency range.To investigate the effects of wheelset bending and axial deformation of the wheel web,a specifi coupling of wheel–rail contact with a fexible wheelset is presented and integrated into a conventional vehicle–track dynamic system model.Both conventional and the proposed dynamic system models are used to carry out numerical analyses on the effects of wheelset bending and axial deformation of the wheel web on wheel–rail rolling contact behaviors.Excitations with various irregularities and speeds were considered.The irregularities included measured track irregularity and harmonic irregularities with two different wavelengths.The speeds ranged from 200 to400km/h.The results show that the proposed model can characterize the effects of fexible wheelset deformation on the wheel–rail rolling contact behavior very well.

Effects of Lateral Motion on the Creep Forces in Wheel/Rail Rolling Contact

The influences of the lateral motion of a single wheelset running on a tangent railway on the creepages and creep forces between wheel and rail are investigated with numerical methods. The effect of the yaw motion of wheelset is neglected in the analysis, and Kalker’s theory of three dimensional elastic bodies in rolling contact is employed to analyze the creep forces in the wheel/rail rolling contact with Non Hertzian form.