Formation of Water Quality of Surface Water Bodies Used in the Material Processing

In the process of production or processing of materials by various methods,there is a need for a large volume of water of the required quality.Today in many regions of the world,there is an acute problem of providing industry with water of a required quality.Its solution is an urgent and difficult task.The water quality of surface water bodies is formed by a combination of a large number of both natural and anthropogenic factors,and is often significantly heterogeneous not only in the water area,but also in depth.As a rule,the water supply of large industrial enterprises is located along the river network.Mergers are the most important nodes of river systems.Understanding the mechanism of transport of pollutants at the confluence of rivers is critical for assessing water quality.In recent years,thanks to the data of satellite images,the interest of researchers in the phenomenon of mixing the waters of merging rivers has increased.The nature of the merger is influenced by the formation of transverse circulation.Within the framework of this work,a study of vorticity,as well as the width of the mixing zone,depending on the distance from the confluence,the speeds of the merging rivers and the angle of confluence was carried out.Since the consumer properties of water are largely determined by its chemical and physical indicators,the intensity of mixing,determined largely by the nature of the secondary circulation,is of fundamental importance for assessing the distribution of hydrochemical indicators of water quality in the mixing zone.These characteristics are important not only for organizing water intake for drinking and technical purposes with the best consumer properties,but also for organizing an effective monitoring system for confluence zones.

Formation mechanism of hydrochemical and quality evaluation of shallow groundwater in the Upper Kebir sub-basin,Northeast Algeria

This study investigates the hydrochemical formation mechanism of shallow groundwater in the Upper Kebir upstream sub-basin(Northeastern Algeria).The objective is to evaluate water quality suitability for domestic purposes through the application of water quality index(WQI).A total of 24 water points(wells and borewells)evenly distributed in the basin were collected and analyzed in the laboratory for determining the major ions and other geochemical parameters in the groundwater.The groundwater hydrochemical types were identified as Cl–Na and Cl–HCO_(3)^(–)Na,with the dominant major ions were found in the order of Na^(+)>Ca^(2+)>Mg^(2+)for cations,and Cl^(−)>SO_(4)^(2−)>HCO_(3)^(–)>NO_(3)^(−)for anions.Results suggest that weathering,dissolution of carbonate,sulfate,salt rocks,and anthropogenic activities were the major contributors to ion content in the groundwater.The Water Quality Index(WQI)was calculated to assess the water quality of potable water.Approximately 50%of the sampled sites exhibited good water quality.However,the study highlights significant NO_(3)contamination in the study area,with 50%of samples exceeding permissible limits.Therefore,effective treatment measures are crucial for the safe consumption of groundwater.

Use of Total Precipitable Water Classification of A Priori Error and Quality Control in Atmospheric Temperature and Water Vapor Sounding Retrieval

This study investigates the use of dynamic a priori error information according to atmospheric moistness and the use of quality controls in temperature and water vapor profile retrievals from hyperspectral infrared （IR） sounders. Temperature and water vapor profiles are retrieved from Atmospheric InfraRed Sounder （AIRS） radiance measurements by applying a physical iterative method using regression retrieval as the first guess. Based on the dependency of first-guess errors on the degree of atmospheric moistness, the a priori first-guess errors classified by total precipitable water （TPW） are applied in the AIRS physical retrieval procedure. Compared to the retrieval results from a fixed a priori error, boundary layer moisture retrievals appear to be improved via TPW classification of a priori first-guess errors. Six quality control （QC） tests, which check non-converged or bad retrievals, large residuals, high terrain and desert areas, and large temperature and moisture deviations from the first guess regression retrieval, are also applied in the AIRS physical retrievals. Significantly large errors are found for the retrievals rejected by these six QCs, and the retrieval errors are substantially reduced via QC over land, which suggest the usefulness and high impact of the QCs, especially over land. In conclusion, the use of dynamic a priori error information according to atmospheric moistness, and the use of appropriate QCs dealing with the geographical information and the deviation from the first-guess as well as the conventional inverse performance are suggested to improve temperature and moisture retrievals and their applications.

Optimization of Quality Control Method and Ethanol Extraction Process of Psoralen and Bergapten in Ficus pandurata

[Objectives]To establish a qualitative identification and content determination method for psoralen and bergapten in the roots and leaves of Ficus pandurata,and the multi-indicator scoring method to optimize the ethanol extraction process for the effective parts of F.pandurata.[Methods]Qualitative identification was carried out by thin-layer chromatography(TLC)and content determination was made by high-performance liquid chromatography(HPLC);the content of psoralen and bergapten and extract yield were used as indicators,to investigate the effects of ethanol volume fraction,solid-to-liquid ratio,extraction time and extraction times on the ethanol extraction process of F.pandurata;multi-indicator scoring method was adopted,orthogonal test method was designed to optimize the extraction process,and verification test was performed.[Results]TLC chart of F.pandurata shows clear spots and good separation;the detected concentrations of psoralen and bergapten in the roots are in the range of 1.02-32.64μg/mL and shows a good linear relationship with the peak area(r=0.9997);these components have not been detected in the leaves,and the precision,RSD of stability and repeatability test is less than 2%;the average recovery rate was 99.8%-100.2%,and the RSD value is 1.12%-1.13%(n=6);the optimized extraction process is to use 50%ethanol as the extraction solvent,the solid-to-liquid ratio of 1∶10,reflux extraction of 3 times,and 1.5 h each time;the results of the three batches of verification tests show that the content of the two indicator components obtained is high,and the average value of the total amount is 0.34 mg/g(RSD=0.30%,n=3).[Conclusions]The established quality control method for F.pandurata is simple,easy,accurate and reproducible;the preferred extraction process is stable and feasible,suitable for the extraction and purification of coumarin effective parts in F.pandurata roots,so it is expected to provide references for further development of F.pandurata.

Study on Quality and Safety Trust Early Warning of Dairy Products Based on Statistical Process Control

In order to solve such problems as lack of dynamic evaluation system in evaluation of quality and safety trust of dairy products,and weak awareness of prevention,it is necessary to introduce the statistical process control into the quality and safety trust evaluation system of dairy products,and establish quality and safety trust early warning model for dairy products,so as to determine the control limit of control chart and carry out early warning according to eight criteria. According to the empirical results,the statistical process control is helpful for finding the hidden process risks and providing the necessary basis for enterprises taking positive measures to raise the confidence of consumers.

Application of Statistical Process Control for Setting Action Thresholds as Quality Assurance of Dose Verifications in External Beam Radiotherapy

Purpose: To test the concept of Statistical Process Control (SPC) as a Quality Assurance (QA) procedure for dose verifications in external beam radiation therapy in conventional and 3D Conformal Radiotherapy (3D-CRT) treatment of cervical cancer. Materials and Methods: A study of QA verification of target doses of 198 cervical cancer patients undergoing External Beam Radiotherapy (EBRT) treatments at two different cancer treatment centers in Kenya was conducted. The target doses were determined from measured entrance doses by the diode in vivo dosimetry. Process Behavior Charts (PBC) developed by SPC were applied for setting Action Thresholds (AT) on the target doses. The AT set was then proposed as QA limits for acceptance or rejection of verified target doses overtime of the EBRT process. Result and Discussion: Target doses for the 198 patients were calculated and SPC applied to test whether the action limits set by the Process Behavior Charts could be applied as QA for verified doses in EBRT. Results for the two sub-groups of n = 3 and n = 4 that were tested produced action thresholds which are within clinical dose specifications for both conventional AP/PA and 3D-CRT EBRT treatment techniques for cervical cancer. Conclusion: Action thresholds set by SPC were within the clinical dose specification of ±5% uncertainty for both conventional AP/PA and 3D-CRT EBRT treatment techniques for cervical cancer. So the concept of SPC could be applied in setting QA action limits for dose verifications in EBRT.

Assessing the Awareness and Usage of Quality Control Tools with Emphasis to Statistical Process Control (SPC) in Ethiopian Manufacturing Industries

Introduction: The present work was devoted to assess the awareness and usage of quality control tools with the emphasis on statistical process control in Ethiopian manufacturing industries. Semi structured questionnaire has been employed to executive and technical managers of manufacturing industries of various size and specialism across the country. Stratified random sample method by region was used to select sample industries for the study. The samples used for this study are industries mainly from Oromiya, Addis Ababa, Tigray, Amara, SNNP and Diredawa regions proportional to their size of the available industries. Methods: Exploratory method and descriptive statistics was used for data analysis. Available documents and reports related to quality control policy of the selected companies were investigated. Results and Discussions: The number of manufacturing industries involved in this study was 44. Of the sampled manufacturing industries about 60% are from Oromiya and Addis Ababa regions. It has been reported that 100% of the respondents said that the importance of quality control tools is very important to their organizations’ productivity and quality improvement (Figure 3). Quality control professionals were also asked the extent to which quality control system is working in their industry and majority of the respondents (45%) have indicated that quality control system is working to some extent in their respective industries (Figure 18). Conclusions and Recommendations: Most of the quality department of the industries did not fully recognize the importance of statistical process control as quality control tools. This is mainly due to lack of awareness and motivation of the top managements, shortage of man power in the area, and others together would make it difficult to apply quality control tools in their organization. In general, the industries in Ethiopia are deficient in vigor and found to be stagnant hence less exposed to a highly competitive market and don’t adopt the latest quality control techniques in order to gain knowledge about systems to improve quality and operational performance. We conclude that quality management system has to be established as an independent entity with a real power and hence the quality control department which is responsible for quality can make an irreversible decision with respect to quality of any given product. Moreover, the concerned bodies (government and ministry of industries) should give attention and work together with universities to ensure how these statistical process control techniques could be incorporated in a curriculum of the universities at higher levels in degree and masters programs. Furthermore, different trainings which could improve quality and efficiency of their respective management system should be given as short and long term to the employees including top and middle managers found in various industries relevant to their process.

Research on the Applications of Cyclic Water Quality Model and Simulated Annealing Algorithm for Water Pollution Control and Planning

With the progress of computer technology, water pollution control and planning has been a hot topic in the scientific community. This paper discusses corresponding research on the applications of cyclic water quality model and simulated annealing algorithm for water pollution control and planning. Environmental engineering education has been the focus of much attention in recent years. Teaching methods of water pollution control and sustainable teaching innovation and creation was explored by many scholars, and the majority of workers engaged in teaching the course. The simulation result proves the effectiveness of the method. We plan to conduct more research in the future research to obtain better research result.

Establishment of water quality index(Na^+,Ca^(2+)) for purified water reused to zinc electrolysis process

The effects of Na+ and Ca2+ in the purified water on the conductivity of zinc electrolyte and the current efficiency of zinc electrolysis were studied by the alternating current bridge method and the simulated electrolysis experiments,and the water quality index of reused water was established. The results show that the conductivity of the solution and the current efficiency decrease as these two kinds of positive ions are added in the electrolyte. The effect of Ca2+ is much more remarkable than that of Na+. ρ(Na+)≤ 8 g/L and ρ(Ca2+)≤20 mg/L are the quality indexes in the zinc electrolysis process and the concentrations of Na+ and Ca2+ in the purified water reused to the process should be less than the limited values,i.e. the water quality index of the purified water should be controlled by its reused amount.

Quantificational analysis on progress of river water quality in China

In order to understand the dynamic change of water quality in a specific period of time,a type of possibility transition matrix based on the theory of Markov process was established.The transition possibility with a weight to calculate the degree of absolute advancement was given based on the result of water quality evaluation.The concept of relative advancement was presented.It was used to evaluate the extent of water quality changed in a period of time.The method was used to calculate the degrees of relative advancement for 4 rivers in China,and the results were analyzed.

Application of an expert system using neural network to control the coagulant dosing in water treatment plant

The coagulation process is one of the most important stages in water treatment plant, which involves many complex physical and chemical phenomena. Moreover, coagulant dosing rate is non-linearly correlated to raw water characteristics such as turbidity, conductivity, PH, temperature, etc. As such, coagulation reaction is hard or even impossible to control satisfactorily by conventional methods. Based on neural network and rule models, an expert system for determining the optimum chemical dosage rate is developed and used in a water treatment work, and the results of actual runs show that in the condition of satisfying the demand of drinking water quality, the usage of coagulant is lowered.

Field performance of alternate wetting and drying furrow irrigation on tomato crop growth, yield, water use efficiency, quality and profitability

Sustainable irrigation method is now essential for adaptation and adoption in the areas where water resources are limited. Therefore, a field experiment was conducted to test the performance of alternate wetting and drying furrow irrigation（AWDFI） on crop growth, yield, water use efficiency（WUE）, fruit quality and profitability analysis of tomato. The experiment was laid out in randomized complete block design with six treatments replicated thrice during the dry seasons of 2013-2014 and 2014-2015. Irrigation water was applied through three ways of furrow： AWDFI, fixed wetting and drying furrow irrigation（FWDFI） and traditional（every） furrow irrigation（TFI）. Each irrigation method was divided into two levels： irrigation up to 100 and 80% field capacity（FC）. Results showed that plant biomass（dry matter） and marketable fruit yield of tomato did not differ significantly between the treatments of AWDFI and TFI, but significant difference was observed in AWDFI and in TFI compared to FWDFI at same irrigation level. AWDFI saved irrigation water by 35 to 38% for the irrigation levels up to 80 and 100% FC, compared to the TFI, respectively. AWDFI improved WUE by around 37 to 40% compared to TFI when irrigated with 100 and 80% FC, respectively. Fruit quality（total soluble solids and pulp） was found greater in AWDFI than in TFI. Net return from AWDFI technique was found nearly similar compared to TFI and more than FWDFI. The benefit cost ratio was viewed higher in AWDFI than in TFI and FWDFI by 2.8, 8.7 and 11, 10.4% when irrigation water was applied up to 100 and 80% FC, respectively. Unit production cost was obtained lower in AWDFI compared to TFI and FWDFI. However, AWDFI is a useful water-saving furrow irrigation technique which may resolve as an alternative choice compared with TFI in the areas where available water and supply methods are limited to irrigation.

Continuous monitoring of residual water content in boiling waterhydrocarbon emulsions during thermomechanical dehydration

Significant waste resources are generated in the form of water-oil emulsions.These emulsions cannot be effectively destroyed on an industrial scale by traditional methods that rely on the settling of the aqueous phase,and therefore,they accumulate in large quantities.Thermomechanical dehydration,based on the evaporation of the water phase,presents a promising process for recycling such waste.However,within the framework of thermomechanical dehydration,the issue of optimizing energy costs for heating raw materials and controlling the water content in the product arises.Standard methods of determining water content under the boiling conditions of highly stable water-hydrocarbon emulsions are characterized by low efficiency,as they require constant sampling and the involvement of additional equipment and personnel.Consequently,this presents a challenge in predicting and creating an automated thermomechanical dehydration process.Therefore,dynamic curves depicting changes in the water content of these emulsions,depending on the temperature of the boiling liquid,have been obtained.It is proposed to determine the rate of temperature increase(dT/dt)of the boiling emulsion for continuous,real-time monitoring of the residual water content and for recording the moment of complete dehydration.Achieving a boiling emulsion temperature of 130-170℃(or higher)and/or the rate of temperature increase from 3.0 to 5.5(or above)indicates the complete dehydration of the emulsion.The proposed method can be implemented in any industrial or laboratory-scale unit for thermomechanical dehydration without significant capital costs.It is based on the use of simple devices consisting of temperature sensors and a computing unit for determining the temperature and rate of heating.

The development of Fructus corni quality standard considering the effects of processing

The quality standards for Fructus Comi have been established based on the effects of the manufacturing processes.Three critical process parameters(CPPs)of extraction,filtration,and concentration to prepare Fructus Comi concentrate were identified by Plackett-Burman design with a single batch of Fructus Corni,which were heating medium temperature,extraction time,and water addition.Morroniside yield,loganin yield,and dry matter yield were process critical quality attributes(CQAs).CPPs arranged with a Box-Behnken design were applied to treat different batches of Fructus Comi After constructing a model that included CPPs,material propertie s,and process CQAs,loganin content was found to be the critical material attribute(CMA).The design space was calculated with a probability method.According to the limits of process CQAs,the minimum content of loganin in Fructus Corni was calculated with an error propagation method,which was 6.92 mg·g^(-1).When the content of loganin in Fructus Corni reaches up to 6.92 mg·g^(-1),the material is considered high-quality and is most suitable for the process.High-quality material can be used for production of Fructus Comi concentrate.This method can also be used to set material quality standards for other Chinese medicines.

Pilot study on treatment of low turbidity and low temperature water by coagulation-immersed membrane process

The objective of this paper was to investigate the practicability of coagulation-immersed membrane process during low-temperature period through the study of steady operation,chemical cleaning methods,water quality and agent consumption.Experimental results showed that:membrane performance decreases with the reduction of temperature,but low temperature has little effect on stable operation of immersed membrane when coagulation as pretreatment.EFM with 1200 mg/L sodium hypochlorite after every 48 filtration cycles was made for reducing membrane fouling efficiently,and the method,with 1.5% sodium hydroxide and 3500 mg/L sodium hypochlorite for 10 h and then 2% hydrochloric acid for 4 h,is an appropriate cleaning method under low temperature.Compared with convention treatment process,immersed membrane process not only has same agent consumption,but also permeated water quality is more superior such as fine removal effect on turbidity with average 0.10 NTU.Therefore,coagulation-immersed membrane process is more appropriate for increasing water quality demand and the treatment of low turbidity and low temperature water.

VPLS Based Quality and Cost Control for Tennessee Eastman Process

Product quality and operation cost control obtain increasing emphases in modern chemical system engineering. To improve the fault detection power of the partial least square (PLS) method for quality control, a new QRPV statistic is proposed in terms of the VP (variable importance in projection) indices of monitored process variables, which is significantly advanced over and different from the conventional Q statistic. QRPV is calculated only by the residuals of the remarkable process variables (RPVs). Therefore, it is the dominant relation between quality and RPV not all process variables (as in the case of the conventional PLS) that is monitored by this new VP-PLS (VPLS) method. The combination of QRPV and T2 statistics is applied to the quality and cost control of the Tennessee Eastman (TE) process, and weak faults can be detected as quickly as possible. Consequently, the product quality of TE process is guaranteed and operation costs are reduced.

Three-Dimensional Water Quality Model Based on FVCOM for Total Load Control Management in Guan River Estuary,Northern Jiangsu Province

Guan River Estuary and adjacent coastal area(GREC) suffer from serious pollution and eutrophicational problems over the recent years.Thus,reducing the land-based load through the national pollutant total load control program and developing hydrodynamic and water quality models that can simulate the complex circulation and water quality kinetics within the system,including longitudinal and lateral variations in nutrient and COD concentrations,is a matter of urgency.In this study,a three-dimensional,hydrodynamic,water quality model was developed in GREC,Northern Jiangsu Province.The complex three-dimensional hydrodynamics of GREC were modeled using the unstructured-grid,finite-volume,free-surface,primitive equation coastal ocean circulation model(FVCOM).The water quality model was adapted from the mesocosm nutrients dynamic model in the south Yellow Sea and considers eight compartments:dissolved inorganic nitrogen,soluble reactive phosphorus(SRP),phytoplankton,zooplankton,detritus,dissolved organic nitrogen(DON),dissolved organic phosphorus(DOP),and chemical oxygen demand.The hydrodynamic and water quality models were calibrated and confirmed for 2012 and 2013.A comparison of the model simulations with extensive dataset shows that the models accurately simulate the longitudinal distribution of the hydrodynamics and water quality.The model can be used for total load control management to improve water quality in this area.

Research on Water-Exit and Take-off Process for Morphing Unmanned Submersible Aerial Vehicle

This paper presents a theoretic implementation method of Morphing Unmanned Submersible Aerial Vehicle （MUSAV）, which can both submerge in the water and fly in the air. Two different shapes are put forward so that the vehicle can suit both submergence and flight, considering the tremendous differences between hydrodynamic configuration and aerodynamic configuration of a vehicle. The transition of the two shapes can be achieved by using morphing technology. The water-to-air process, including water-exit, morphing, take-off and steady flight, is analyzed. The hydrodynamic and aerodynamic model of the vehicle exiting the water surface obliquely and then taking off into the air has been founded. The control strategy after morphing is analyzed and the control method is given. Numerical method is used to validate the motion model of the water-exit process. Results of simulations show the validity of the proposed model and the feasibility of MUSAV in theory.

Research on Quality Management Measures of Green Building Construction

Urbanization has led to the rapid development of the construction industry.However,this has also led to higher requirements for the construction engineering management.Other than the quality monitoring of engineering construction,the energy-saving properties of the building should also be considered.Therefore,a scientific management approach should be adopted to improve green building management.This paper primarily examines the importance of quality management in green building construction,along with the factors influencing it.It also identifies the quality issues present in current green building construction.Finally,it proposes measures for quality management in the green building construction process to facilitate the industry’s healthy development.