Velocity structure in the South Yellow Sea basin based on first-arrival tomography of wide-angle seismic data and its geological implications

The South Yellow Sea basin is filled with Mesozoic-Cenozoic continental sediments overlying pre-Palaeozoic and Mesozoic-Palaeozoic marine sediments.Conventional multi-channel seismic data cannot describe the velocity structure of the marine residual basin in detail,leading to the lack of a deeper understanding of the distribution and lithology owing to strong energy shielding on the top interface of marine sediments.In this study,we present seismic tomography data from ocean bottom seismographs that describe the NEE-trending velocity distributions of the basin.The results indicate that strong velocity variations occur at shallow crustal levels.Horizontal velocity bodies show good correlation with surface geological features,and multi-layer features exist in the vertical velocity framework(depth:0–10 km).The analyses of the velocity model,gravity data,magnetic data,multichannel seismic profiles,and drilling data showed that high-velocity anomalies(>6.5 km/s)of small(thickness:1–2 km)and large(thickness:>5 km)scales were caused by igneous complexes in the multi-layer structure,which were active during the Palaeogene.Possible locations of good Mesozoic and Palaeozoic marine strata are limited to the Central Uplift and the western part of the Northern Depression along the wide-angle ocean bottom seismograph array.Following the Indosinian movement,a strong compression existed in the Northern Depression during the extensional phase that caused the formation of folds in the middle of the survey line.This study is useful for reconstructing the regional tectonic evolution and delineating the distribution of the marine residual basin in the South Yellow Sea basin.

A wide-angle wave control method of reducing torque ripple for brushless DC motor

In order to deal with torque pulsation problem caused by traditional control method for brushless DC （BLDC） motor and to achieve high precision and good stability, a novel control strategy is proposed. Compared with the traditional control scheme, by using phase voltage as a control objective and making waveform of phase current approximately quasi-sinusoidal, torque ripple of BLDC motor is reduced from the original 14% to 3.4%, while toque is increased by 3.8%. Furthermore, by detecting zero-crossings of back electromotive force （BEMF） with non-conducting phases, sensorless control is realized. The new control strategy is simple. It can minimize torque ripple, increase torque, and realize sensorless control for BLDC motor. Simulation and experiments show good performance of BLDC motor by using the new control method.

Crustal wide-angle reflection imaging along Lianxian-Gangkou profile in Guangdong province,China

A 400 km-long wide-angle seismic experiment along Lianxian-Gangkou profile in South China was carried out to study contact relationship between southeast continental margin of Yangtze block and northwest continental margin of Cathaysia block. We reconstructed crustal wide-angle reflection structure by the depth-domain pre-stack migration and the crustal velocity model constructed from the traveltime fitting. The wide-angle reflection section shows different reflection （from crystalline basement and Moho） pattern beneath the Yangtze and Cathaysia blocks, and suggests the Wuchuan-Sihui fault is the boundary between them. A cluster of well-developed reflections on Moho and in its underlying topmost mantle probably comes from alternative thin layers, which may be seismic signature of strong interaction between crust and mantle in the tectonic environment of lithosphere extension.

Crustal structure of the eastern Dabie orogenic belt from the seismic tomography and wide-angle reflection studies

The studies of seismic tomography and wide-angle reflection have been carried out to reveal the velocity structUrebeneath the eastern Dabie orogenic belt. The result from the seismic tomography shows the high velocity bodiesmight be positioned to a depth of only about 1 .5 km below sea level within the Dabie ultra-high pressure metamorphic (UHPM) belt; the fan-profile shows the Shuihou-Wuhe fault, the demarcation between the South Dabieand the North Dabie, slopes to the south-west at a dip angle of about 45° in the bottom of upper crust. The wideangle reflection shows the middle crustal boundaries and the complex features from the lower crust.

Comparison of scleral buckling using wide-angle viewing systems and indirect ophthalmoscope for rhegmatogenous retinal detachment

AIM：To compare the effects of scleral buckling using wide-angle viewing systems（WAVS） with that using indirect ophthalmoscope for the treatment of rhegmatogenous retinal detachment.METHODS：The study was a retrospective analyses of the medical records of 94 eyes（94 patients） with rhegmatogenous retinal detachment.Among them,47 eyes underwent scleral buckling using WAVS with endoiiluminator（Group W）,and 47 eyes underwent scleral buckling using indirect ophthalmoscope（Group I）.Surgical durations,primary success rate,best-corrected visual acuities（BCVA）,delayed subretinal fluid absorptions and surgical complications were compared between the two groups.RESULTS：At baseline,there were no statistical differences between the two groups in patient＇s age（P=0.997）,gender（P=0.853）,symptom duration（P=0.216）,BCVA（P=0.389）,refractive error（P=0.167）,intraocular pressure（P=0.595）,the number of retinal breaks（P=0.832）,the extent of retinal detachment（P =0.246）,subretinal demarcation line（P=0.801）,and macular detachment（P=0.811）.The follow-up period was 12 mo.The surgical durations in Group W（with or without encircling buckling） were significant shorter than those in Group I（P〈0.001 respectively）.The primary success rate was94.27%in Group W,which was similar to that in Group I（92.38%,P=0.931）.The BCVA in Group W was better than that in Group I（P〈0.001） at 1-month follow-up visit.However,there were no significant differences between the two groups at 3-month（P=0.221）,6-month（P =0.674）,and 12-month（P=0.363） follow-up visits respectively.Delayed subretinal fluid absorptions were more common in Group I than in Group W at 1-month（P=0.045） follow-up visit,but there were no significant differences between the two groups at 3-month（P=0.111）,6-month（P =1.000） and 12-month follow-up visits respectively.CONCLUSION：Scleral buckling using WAVS can be an alternative choose for rhegmatogenous retinal detachment

Characteristics of crustal variation and extensional break-up in the Western Pacific back-arc region based on a wide-angle seismic profile

The marginal sea and back-arc basins in the Western Pacific Ocean have become the focus of tectonics due to their unique tectonic location.To understand the deep crustal structure in the back-arc region,we present a 545-kmlong active-source ocean bottom seismometer(OBS)wide-angle reflection/refraction profile in the East China Sea.The P wave velocity model shows that the Moho depth rises significantly,from approximately 30 km in the East China Sea shelf to approximately 16 km in the axis of the Okinawa Trough.The lower crustal high-velocity zone(HVZ)in the southern Okinawa Trough,with V_(p) of 6.8-7.3 km/s,is a remarkable manifestation of the mantle material upwelling and accretion to the lower crust.This confirms that the lower crustal high-velocity mantle accretion is developed in the southern Okinawa Trough.During the process of back-arc extension,the crustal structure of the southern Okinawa Trough is completely invaded and penetrated by the upper mantle material in the axis region.In some areas of the southern central graben,the crust may has broken up and entered the initial stage of seafloor spreading.The discontinuous HVZs in the lower crust in the back-arc region also indicate the migration of spreading centers in the back-arc region since the Cenozoic.The asthenosphere material upwelling in the continent-ocean transition zone is constantly driving the lithosphere eastward for episodic extension,and is causing evident tectonic migration in the Western Pacific back-arc region.

Accuracy Analysis of Low Altitude Photogrammetry with Wide-angle Camera

Firstly,the relationship between the accuracy of low altitude aerial photogrammetry and the field angle of camera is made by a quantitative analysis from the theory.The conclusion that the low altitude photogrammetry should use wide-angle camera as much as possible is done.Then,the limitation of the single lens camera to expand field angle and the combined wide-angle camera existing on the market not suitable for light load of low altitude UAV(Unmanned Aerial Vehicle)due to excessive weight are pointed out.The characteristics of combined wide-angle low altitude light camera with self-calibration and self-stabilization developed by the author are described,especially the principle of self-calibration for the combination of static error and dynamic error.Based on the practice of large scale mapping,a technical procedure in aerial photography by taking with wide-angle camera and large overlap simultaneously for improving the accuracy of low altitude photogrammetry is proposed.The typical engineering produced data is used to verity the above theoretical analysis.A technical route for increasing accuracy of low altitude photogrammetry with combined wide-angle camera is expounded.

Wide-angle and broadband graded-refractive-index antireflection coatings

The design and fabrication of graded-refractive-index （GRIN） antireflection （AR） coatings with wide-angle and broadband characteristics are demonstrated. The optimization of the graded-index profiles with a genetic algorithm is used in the design of the GRIN AR coatings. The average reflectance over a wavelength range from 400 nm to 800 nm and angles of incidence from 0° to 80° could be reduced to only 0.1% by applying an optimized AR coating onto BK7 glass. The optimization of step-graded GRIN AR coating is then further investigated in detail. A two-layer AR coating was deposited by electron beam evaporation with glancing angle deposition technology, and the positional homogeneity was improved by depositing the film from two opposite directions. The microstructure of the AR coating was investigated by scanning electron microscopy, and the residual reflectances of the coating sample are in agreement with theoretical calculations. The optimized GRIN AR coatings are beneficial to increasing the efficiency of light utilization.

A flexible ultra-broadband metamaterial absorber working on whole K-bands with polarization-insensitive and wide-angle stability

For potential military applications, a flexible metamaterial absorber(MMA) working on whole K-bands with totalthickness of 3.367 mm, ultra-broadband, polarization-insensitive, and wide-angle stability is presented based on frequencyselective surface(FSS). The absorber is composed of polyvinyl chloride(PVC) layer, polyimide(PI) layer, and poly tetra fluoro ethylene(PTFE) layer, with a sandwich structure of PVC–PI–PTFE–metal plate. Periodic conductive patterns play a crucial role in the absorber, and in traditional, it is designed on the upper surface of PI layer to form LC resonance. Different from commonly absorber, all the patterns are located on the lower surface of the PI layer in this work, and hence the impedance matching and absorptivity are improved in this purposed absorber. The flexible absorber with patterns on lower surface of the PI layer is compared with that on upper surface of the PI layer, the difference and the reasons are explained by absorption mechanism based on equivalent circuit model, and surface current density and electric field distribution are used to analyze resonance peaks. Absorptivity is greater than 90% in a frequency range of 10.47 GHz–45.44 GHz with relative bandwidth of 125.1%, covering the whole Ku, K, Ka, and some of X, U bands, especially containing the whole K bands from 12 GHz to 40 GHz. Radar cross section(RCS) is reduced at least 10 dB in 11.48 GHz–43.87 GHz frequency ranges,and absorption remained about 90% when the incident angle changed from 0°to 55°. The purposed absorber is fabricated,measured, and experiment results show good agreement with theoretical analysis and numerical simulation. After bonded on outer surface of different cylinders with diameters of 200 mm and 100 mm, the absorption of MMA is approximately reduced 10% and 20% respectively, which shows good conformal character with surface of various curvatures. Due to the attractive performance on strong absorption in the whole K-bands, flexible and easy conformal, our design exhibits broad potential application in radar stealth and sensors.

Terahertz wide-angle metalens with nearly ideal object-image relation

Metalenses are essential components in terahertz imaging systems.However,without careful design,they show limited field of view and their practical applications are hindered.Here,a wide-angle metalens is proposed whose structure is optimized for focusing within the incident angles of±25°.Simulation and experiment results show that the focusing efficiency,spot size,and modulation transfer function of this lens are not sensitive to the incident angle.More importantly,this wide-angle metalens follows the ideal Gaussian formula for the object-image relation,which ensures a wider field of view and better contrast in the imaging experiment.

Crustal structure of Gondwana-and Yangtze-typed blocks:An example by wide-angle seismic profile from Menglian to Malong in western Yunnan

The wide-angle seismic profile between Menglian and Malong crosses the Baoshan block (Gondwana-typed), and Simao and southwestern Yangtze blocks (Yangtze-typed). By in-terpreting the wide-angle seismic data, we obtained the seismic crust/upper mantle structure of P-wave velocities together with the seismic reflections of these three blocks, Changning- Menglian and Mojiang suture zones among the mentioned three blocks. Our interpreting results demonstrate that the P-wave crustal velocity of Simao block is slower than that of Baoshan and southwestern Yangtze block and the crustal thickness gradually thickens from the Baoshan block, Simao to southwestern Yangtze block. Crustal reflection patterns of these three blocks have dis-tinct differences too. For the Gondwana-typed blocks, seismic reflections in the upper crust are well developed while in middle-lower crust they are very weak. The crustal reflections in the Yangtze block are very well developed. The crustal reflection patterns in Simao and southwest-ern Yangtze blocks are distinguishable. The average thickness of the crust in the studied area is about 40 km. And we make some discussions on the crustal thickening model of the three blocks in western Yunnan and tectonic setting of seismic developing and interaction of Gondwana and Yangtze blocks.

East-west crustal structure and “down-bowing” Moho under the northern Tibet revealed by wide-angle seismic profile

We recognized 6 sets of reflecting P- and S-wave events from Moho and other interfaces within the crust, respectively, with the wide-angle seismic data acquired from 510 km-long Selincuo-Ya'anduo profile in the northern Tibet, fitted the observed events with forward modeling, and interpreted crustal structure of P- and S-wave velocities and Poisson's ratio under the profile. The results demonstrate that the crustal structure between Yarlungzangbo and Bangong-Nujiang sutures changes abruptly, and the crust is the thickest at the middle part of the profile with thickness of 80 km or more. The 'down-bowing' Moho is the striking feature for the crustal variation along the west-east direction. The Moho uplifts with steps, and the uplifting rate westward is greater than that eastward. The heterogeneity of P- and S-wave velocities exists both vertically and horizontally, and one lower velocity layer (LVL) exists with the depth range of 27-34 km and the thickness range of 5-7 km. For the upper crust, Poisson's ratio is the lowest at the middle part of the profile; for the lower crust, the Poisson's ratio at the east segment is lower than that at west segment, which means that the crustal rigidity for the upper crust is different from the lower crust, and the lower crust under the east segment of the profile is more ductile. We infer that the substance in the lower crust endured eastward flow along with the collision between Eurasian and Indian plates, and the 'down-bowing' Moho is attributable to the multi-phase E-W tectonic processes.

Joint exploration of crustal structure in Fuzhou basin and its vicinities by deep seismic reflection and high-resolution refraction as well as wide-angle reflection/refraction

The Fuzhou basin and its vicinities are located at the northern end of the southeastern coastal seismic zone of the mainland of China. By the joint explorations of high-resolution seismic refraction and wide-angle reflection/refraction as well as deep seismic reflection in the region, which is the first synthetic profile in China, its fine velocity structure and geometric structure from the ground to Moho discontinuity is obtained. The result shows that the crust is obviously layered with a thickness of about 32 km. Basically, it consists of two parts: upper crust and lower crust. The velocity of the upper crust is 5.9-6.2 km/s in which there is a 3-4-km-thick weak low-velocity layer between the depths of 10-15 km, while the velocity of the lower crust in the range of 6.3-7.2 km/s. There exists a strong velocity gradient layer about 3 km thick above the Moho discontinuity whose velocity increases from 6.5 to 7.27 km/s. There exist high-angle normal faults that are small in size and extend only in the shallow crust. These faults are the secondary developed on the hanging wall of westward dipping low-angle normal faults. Thus, their seismogenic ability is limited, however, there exists a high-angle deep fault in the crust from Changle-Zaoan fault zone to seashore fault zone. This deep fault has cut the interface between the upper and lower crusts and Moho discontinuity, and may be the deep structure to trigger destructive earthquake source in future to affect Fuzhou City. These results have advanced the detecting precision of the deep structure in the southeastern coastal seismic zone of the mainland of China. In the aspect of the combined feature of the deep and shallow extensional structures that consist of the westward dipping low-angle normal faults and secondary normal faults on their hanging walls in the upper crust, it is firstly obtained that a united structural interpretation has deepened the knowledge about the deep dynamic process in the southeastern coastal seismic zone. At the same time, in synthetic application of deep seismic detecting methods for deep tectonic background, it possesses a wide referenced meaning to the other regions.

Design of a real-time fiber-optic infrared imaging system with wide-angle and large depth of field

A key limitation in the observation of instruments used in operations and heart sutures during a procedure is the scattering and absorption during optical imaging in the presence of blood.Therefore,we propose a novel real-time fiber-optic infrared imaging system simultaneously capturing a flexible wide field of view(FOV) and large depth of field infrared image in real time.The assessment criteria for imaging quality of the objective and coupling lens have been optimized and evaluated.Furthermore,the feasibility of manufacturing and assembly has been demonstrated with tolerance sensitivity and the Monte Carlo analysis.The simulated results show that the optical system can achieve a large working distance of 8 to25 mm,a wide FOV of 120°,and the relative illuminance is over 0.98 in the overall FOV.To achieve high imaging quality in the proposed system,the modulation transfer function is over 0.661 at 16.7 Ip/mm for a 320×256 short wavelength infrared camera sensor with a pixel size of 30 μm.

Impact and Solutions of Seawater Heterogeneity on Wide-Angle Tomographic Inversion of Crustal Velocities in Deep Marine Environments—Numerical Studies

The seawater column is typically taken as a homogeneous velocity layer in wide-angle crustal seismic surveys in marine environments. However, heterogeneities in salinity and temperature throughout the seawater layer result insignificant lateral variations in its seismic velocity, especially in deep marine environments. Failure to compensate for these velocity inhomogeneities will introduce significant artifacts in constructing crustal velocity models using seismic tomography. In this study, we conduct numerical experiments to investigate the impact of heterogeneous seismic velocities in seawater on tomographic inversion for crustal velocity models. Experiments that include lateral variation in seawater velocity demonstrated that the modeled crustal velocities were contaminated by artifacts from tomographic inversions when assuming a homogeneous water layer. To suppress such artifacts, we propose two strategies：（1） simultaneous inversion of water velocities and the crustal velocities;（2） layer-stripping inversion during which to first invert for seawater velocity and then correct the travel times before inverting for crustal velocities. The layer-stripping inversion significantly improves the modeling of variation in seawater velocity when preformed with seismic sensors deployed on the ocean bottom and in the water column. Such strategies improve crustal modeling via wide-angle seismic surveys in deep-marine environment.

The deep background of large-scale,Mesozoic Cu-Au-W metallogenesis in northeastern South China:Constraints from Yingshan-Changshan wide-angle seismic reflection/refraction data

To investigate the geodynamic processes of Mesozoic large-scale mineralization in South China,we deployed a 350-km-long,wide-angle seismic reflection/refraction sounding profile between Yingshan in Hubei and Changshan in Zhejiang.This profile traverses the Cu-Au metallogenic belt in the middle and lower reaches of the Yangtze River(YMB),the Jiangnan W-polymetal metallogenic belt(JNMB),and the Qinhang Cu-polymetal metallogenic belt(QHMB).Our imaging results reveal various interesting velocity features along the profile.(1)The velocity structure is characterized by vertical layering and horizontal blocking;(2)the YMB is marked by high velocity and high V_(p)/V_(s) ratios in general with a significantly uplifted Moho interface and a thin crust of~31 km,and the lower crust contains high-velocity anomalies and has the characteristics of a crustmantle transition zone;(3)the JNMB is bounded by the Jiangnan fault and Jingdezhen-Huangshan fault and has low-velocity anomalies and low V_(p)/V_(s) ratios;and(4)the QHMB is characterized by high-velocity anomalies and high V_(p)/V_(s) ratios.The highvelocity anomalies in the YMB and QHMB represent relatively Cu-Au-rich mafic juvenile lower crust.The formation of this kind of crust is considered to be related to mantle-derived magma underplating or residues of Neoproterozoic oceanic crustal materials,and it also provided sources for large-scale Cu-Au mineralization in the Mesozoic.The JNMB has features similar to those of ancient crusts enriched in W-Sn,the partial melting of which played a leading role in the formation of the superlarge W deposits in this belt.Considering these results and other regional geological data,we propose that a large-scale oblique upwelling of the asthenosphere along the collisional belt of the Yangtze and Cathaysia blocks during the Mesozoic was the deep driving mechanism for the explosive mineralization of Cu,Au,and W in northeastern South China.The boundaries of the blocks or terrains and discontinuities of the lithosphere were the main channels for deep heat and magmas and therefore controlled the spatial distribution of the metallogenic belt.

Investigation of wide-angle thin metamaterial absorber at infrared region

In the practical application,a wide-angle absorption with simple structure is still crucial property of metamaterial absorbers(MAs).A single-band infrared MA is introduced to analyze the angle insensitive mechanism.Numerical simulation reveals that a perfect absorption peak with 99.9%(7.55μm)is achieved at normal incidence,as well as the absorptivity is respectively 69.7%(7.46μm)and 93.5%(7.46μm)for transverse electric(TE)and transverse magnetic(TM)modes at 70°incidence.By changing substrate thickness,the absorption ratio at 70°is increased to 91%(7.46μm)for TE mode.Our design can also keep the good absorption stability for the geometric parameters.The E z-field distributions for different incident angles are given to investigate the physical mechanism.The designed MA can realize good wide-angle tolerance.This MA owns great applications,including infrared spectroscopy,solar harvester and plasmonic sensors.

A Review of Wideband Wide-Angle Scanning 2-D Phased Array and Its Applications in Satellite Communication

In this review,research progress on the wideband wide-angle scanning two-dimensional phased arrays is summarized.The importance of the wideband and the wide-angle scanning characteristics for satellite communication is discussed.Issues like grating lobe avoidance,active reflection coefficient suppression and gain fluctuation reduction are emphasized in this review.Besides,techniques to address these issues and methods to realize the wideband wide-angle scanning phased array are reviewed.

Calculation of the wide-angle neutron spectra from the ~9Be(d,xn) reaction in a thick beryllium target

The multi-layer computing model is developed to calculate wide-angle neutron spectra, in the range from0° to 180° with a 5° step, produced by bombarding a thick beryllium target with deuterons. The double-differential cross-sections(DDCSs) for the ~9 Be(d, xn) reaction are calculated using the TALYS-1.8 code. They are in agreement with the experimental data, and are much better than the PHITS-JQMD/GEM results at 15°, 30°, 45° and 60° neutron emission angles for deuteron energy of 10.0 MeV. In the TALYS-1.8 code, neutron contributions from direct reactions(break-up, stripping and knock-out reactions) are controlled by adjustable parameters, which describe the basic characteristics of typical direct reactions and control the relative intensity and the position of the ridgy hillock at the tail of DDCSs. It is found that the typical calculated wide-angle neutron spectra for different neutron emission angles and neutron angular distributions agree quite well with the experimental data for 13.5 MeV deuterons. The multi-layer computing model can reproduce the experimental data reasonably well by optimizing the adjustable parameters in the TALYS-1.8 code. Given the good agreement with the experimental data, the multi-layer computing model could provide better predictions of wide-angle neutron energy spectra, neutron angular distributions and neutron yields for the ~9 Be(d, xn) reaction neutron source.

Sampling visual SLAM with a wide-angle camera for legged mobile robots

Precise localisation and navigation are the two most important tasks for mobile robots.Visual simultaneous localisation and mapping(VSLAM)is useful in localisation systems of mobile robots.The wide-angle camera has a broad field of vision and more abundant information on images,so it is widely used in mobile robots,including legged robots.However,wide-angle cameras are more complicated than ordinary cameras in the design of visual localisation systems,and higher requirements and challenges are put forward for VSLAM technologies based on wide-angle cameras.In order to resolve the problem of distortion in wide-angle images and improve the accuracy of localisation,a sampling VSLAM based on a wide-angle camera model for legged mobile robots is proposed.For the predictability of the periodic motion of a legged robot,in the method,the images are sampled periodically,image blocks with clear texture are selected and the image details are enhanced to extract the feature points on the image.Then,the feature points of the blocks are extracted and by using the feature points of the blocks in the images,the feature points on the images are extracted.Finally,the points on the incident light through the normalised plane are selected as the template points;the relationship between the template points and the images is established through the wide-angle camera model,and the pixel coordinates of the template points in the images and the descriptors are calculated.Moreover,many experiments are conducted on the TUM datasets with a quadruped robot.The experimental results show that the trajectory error and translation error measured by the proposed method are reduced compared with the VINS-MONO,ORB-SLAM3 and Periodic SLAM systems.