Real-Time Wind Speed Analysis at Wind-Damaged Tower of a Transmission Line

Affected by the Super Typhoon“Mangkhut,”a total of five base towers of a transmission line in the mountainous area of China collapsed.In this paper,a mathematical model is established based on the Shuttle Radar Topography Mission(SRTM)data near the accident tower.The measured wind speed in the plain area under the mountain is used as the calculation boundary condition.The wind speed at the top of the mountain is calculated by using a numerical simulation method.The design wind speed and calculated wind speed at the tower site are compared,and the influence of wind speed on tower position in this wind disaster accident is analyzed.

A new framework for evaluating along-wind responses of a transmission tower

In this paper, an analytical framework to evaluate the along-wind-induced dynamic responses of a transmission tower is presented. Two analytical models and a new method are developed： （1） a higher mode generalized force spectrum （GFS） model of the transmission tower is deduced; （2） an analytical model that includes the contributions of the higher modes is further derived as a rational algebraic formula to estimate the structural displacement response; and （3） a new approach, applying load with displacement （ALD） instead of force, to solve the internal force of transmission tower is given. Unlike conventional methods, the ALD method can avoid calculating equivalent static wind loads （ESWLs）. Finally, a transmission tower structure is used as a numerical example to verify the feasibility and accuracy of the ALD method.

Operation of offshore wind farms connected with DRU-HVDC transmission systems with special consideration of faults

The diode rectifier unit(DRU)-based high-voltage DC(DRU-HVDC) system is a promising solution for offshore wind energy transmission thanks to its compact design, high efficiency, and strong reliability. Herein we investigate the feasibility of the DRU-HVDC system considering onshore and offshore AC grid faults, DC cable faults, and internal DRU faults. To ensure safe operation during the faults, the wind turbine(WT) converters are designed to operate in either current-limiting or voltage-limiting mode to limit potential excessive overcurrent or overvoltage. Strategies for providing fault currents using WT converters during offshore AC faults to enable offshore overcurrent and differential fault protection are investigated. The DRU-HVDC system is robust against various faults, and it can automatically restore power transmission after fault isolation. Simulation results confirm the system performance under various fault conditions.

A Storage and Transmission Joint Planning Method for Centralized Wind Power Transmission

Centralized delivery has become the main operation mode under the scaled development of wind power.Transmission channels are usually the guarantee of out-delivered wind power for large-scale wind base.The configuration of transmission capacity,which has the features of low utilization and poor economy,is hardly matching correctly due to the volatility and low energy density of wind.The usage of energy storage can mitigate wind power fluctuations and reduce the requirement of out-delivery transmission capacity,but facing the issue of energy storage cost recovery.Therefore,it is necessary to optimize the allocation of energy storage while considering the problem of wind power transmission.This paper studies the joint optimization of large-scale wind power transmission capacity and energy storage,reveals the mechanism of energy storage in order to reduce the power fluctuation of wind power base and slow down the demand of transmission.Then,analyze the multi-functional cost-sharing mode of energy storage,improve the efficiency of energy storage cost recovery.Constructs the coordination optimization configuration model to deal with the problem of large-scale wind power transmission capacity and energy storage,and realizes the transmission capacity optimization coordination and optimization with energy storage.The proposed method is verified by a wind base located in Northeast China.

Minimum Load-curtailment in Transmission Network Planning Considering Integrated Wind Farms

提出应用鲁棒线性优化理论来研究电网规划中含多个风电场的最小切负荷量计算问题,为含多个风电场的系统安全性研究提供了一条新的思路。根据Seng-Cheol Kang提出的鲁棒线性优化理论,建立电网规划中考虑风电场影响的最小切负荷量模型。该模型以出力上下限和出力期望值来描述风电场的出力,最终转化为一确定性的线性规划问题并进行求解。在计及或不计及发电机调整的情况下,该模型均能够给出最安全的切负荷方案,除此以外还能给出更多介于最可靠与最经济之间的切负荷方案,实现灵活决策;在计及发电机出力可调的情况下,该模型能够给出相应的发电机出力方案;该模型能够初步给出各种切负荷方案下电网规划方案的可靠程度。基于修正的Garver’s 6节点系统和修正的巴西南部46节点系统算例测试结果验证了该方法的有效性。

Impact Analyses of Wind Farm on Performances of Transmission Line Relay Protection

A simulation system for power grid with concentrated large-scale wind farm integration is established based on the electro-magnetic transient model of wind turbine equipped with doubly-fed induction generator (DFIG),which is built by real-time digital simulator (RTDS).Using the hardware communication interface of RTDS,a closed-loop testing experiment is accomplished to study the impacts of large-scale wind farms on the existing relay protection devices for wind farm outgoing transmission line.This paper points out problems existing in current relay protection devices as follows:fault phase selector can select unwanted phase due to the changes of fault features caused by special network connection of wind farms;blocking condition for distance protections needs to be re-examined due to the weak power-feed characteristics of wind farms;and power frequency parameter based relay protection devices cannot accurately operate due to the special transient voltage and current characteristics of wind farms during fault period.Results lay the foundation for improving the performances of the existing relay protection device and developing new principle relay protection.

Short-Term Reliability Evaluation of Transmission System under Strong Wind and Rain

The impact of strong wind and rain loads will adversely affect the reliability of the overhead lines, it’s necessary to study changes in risk of transmission system and establish the reliability model of overhead lines through the strong wind and rain loads. In this article, the stochastic properties of overhead lines’ strength and loads were used, according to principles of structural reliability, time-dependent failure probability model of overhead lines was established under the impact of strong wind and rain loads. Simulation of the IEEE-79 system demonstrates that failure probability model is effective. This simulation result also shows that the impact of strong wind and rain loads will seriously affect reliability indices of system loads, rain loads cannot be ignored under strong wind and rain loads.

Application of Lead Viscoelastic Dampers to Wind Vibration Control on Big-Span Power Transmission Tower

To study the wind vibration response of power transmission tower, the lead viscoelastic dampers （LVDs） were applied to a cup tower. With time history analysis method, the displacement, velocity, acceleration and force response of the tower was calculated and analyzed. The results show that the control effect of lead viscoelastic dampers is very good, and the damping ratio can reach 20% or more when they are applied to the tower head.

Dynamic Reliability Evaluation and Life Prediction of Transmission System of Multi-Performance Degraded Wind Turbine

Wind power is a kind of important green energy.Thus,wind turbines have been widely utilized around the world.Wind turbines are composed of many important components.Among these components,the failure rate of the transmission system is relatively high in wind turbines.It is because the components are subjected to aerodynamic loads for a long time.In addition,its inertial load will result in fatigue fracture,wear and other problems.In this situation,wind turbines have to be repaired at a higher cost.Moreover,the traditional reliability methods are difficult to deal with the above challenges when performing the reliability analysis of the transmission system of wind turbines.To solve this problem,a stress-strength interference model based on performance degradation is introduced.Based on considering the strength degradation of each component,the improved Monte Carlomethod simulation based on the Back Propagation neural network is used to obtain the curve of system reliability over time.Finally,the Miner linear cumulative damage theory and the Carten-Dolan cumulative damage theory method are used to calculate the cumulative damage and fatigue life of the gear transmission system.

On Issues of Large-Scale and Long-Distance Transmission of Wind Power

While having constantly developed for five years,China's wind power meets its bottleneck of further development in fast-growing areas due to the insufficient market accommodation.In contrast,the Central China and the East China have experienced the shortage of coal,oil and natural gas for power generation in recent winters.Hence,how to handle the discrepancy between insufficient accommodation and short energy supply has become the focus of attention both domestically and abroad.Taking Jiuquan Wind Power Base as an example,the reverse distribution between the energy resources and the consumer market,the wind power accommodation and the energy transmission are analyzed;the necessity and feasibility of long-distance power transmission are also discussed,which presents a technical roadmap for the long-distance transmission of thermal and wind power in combination.

Study on Hydraulic Transmission of Offshore Low-speed Wind Energy Generator

For offshore hydraulic drive wind turbines,the problems of unsatisfactory speed control and low efficiency at low wind speeds are targeted.A low-speed high-torque radial piston pump is designed to replace the traditional fixed pump with a particular focus on its low-speed performance.The pump is characterized by small internal leakage at low wind speeds and high volumetric efficiency,which is beneficial to improve the power generation efficiency of the system.A new linear control method based on the PID algorithm and feedforward compensation was proposed to obtain the constant speed output control of variable motor at low wind speed.With the model for wind turbine and fixed pump-variable motor main drive system,the system was simulated and experimentally proved to verify the feasibility and anti-interference performance of the system control method at low wind speeds.A promising outcome was obtained on the response characteristics of system power and efficiency at low wind speeds.This can be a powerful technical support for the normal ustility of hydraulic drive wind turbines.

Wind Generation Modeling for Transmission Systems Adequacy Studies with Economic Dispatch

In this paper, a strategy is proposed in order to introduce in a realistic way wind generation into a HL11 （bulk power system） non sequential Monte Carlo adequacy study with economic dispatch. Thanks to the implemented solution, wind generation is consequently confronted to operational constraints related to high powered thermal units, nuclear parks or thermal machines with technical minimum value. Moreover, during each simulated system state, a DC load flow is also calculated in order to evaluate reinforcements optimizing the large scale integration of wind power production. The simulation tool modified during the present work is called Scanner and is the property of Tractebel Engineering （Gaz de France-Suez） company. It has been here applied to an academic test system： the Roy Billinton Test System （RBTS）.

Research on Slot-pole Combination in High-power Direct-drive PM Vernier Generator for Fractional Frequency Transmission System

Offshore wind energy is an important part of clean energy,and the adoption of wind energy to generate electricity will contribute to the implementation of the carbon peaking and carbon neutrality goals.The combination of the fractional frequency transmission system(FFTS) and the direct-drive wind turbine generator will be beneficial to the development of the offshore wind power industry.The use of fractional frequency in FFTS is beneficial to the transmission of electrical energy,but it will also lead to an increase in the volume and weight of the generator,which is unfavorable for wind power generation.Improving the torque density of the generator can effectively reduce the volume of the generators.The vernier permanent magnet machine(VPM) operates on the magnetic flux modulation principle and has the merits of high torque density.In the field of electric machines,the vernier machine based on the principle of magnetic flux modulation has been proved its feasibility to reduce the volume and weight.However,in the field of low-speed direct-drive machines for high-power fractional frequency power generation,there are still few related researches.Therefore,this paper studies the application of magnetic flux modulation in fractional frequency and high-power direct-drive wind turbine generators,mainly analyzes the influence of different pole ratios and different pole pairs on the generator,and draws some conclusions to provide reference for the design of wind turbine generators.

Analysis of the Quasi-Static Buffeting Responses of Transmission Lines to Moving Downburst

Downburst event is identified as a major cause to failure of transmission lines in non-coastal regions.In this paper,a novel nonlinear analytical frame for quasi-static buffeting responses of hinged and multi-span insulator-line systems are derived based on the theory of cable structure.The closed-form solutions are presented and applied to predict nonlinear response including displacements and other reactions of the system subjected to a moving downburst wind in a case study.Accuracy and efficiency of the derived analytical frame are validated via comparisons with results from finite element method.

Hydro and Wind Power Integration: A Case Study of Dargai Station in Pakistan

Pakistan is facing acute energy crises since last few years. Due to shortage of fuel oil and its sky touching prices, it seems very uneconomical to generate electricity from fuel oil. In order to generate cheap electricity we have to rely on renewable energy resources. To address these challenges, wind power generation is among the popular options in the world which is now being considered in Pakistan as well. However unremitting change in wind speed from calm to stormy introduces real challenges. Storing wind energy in batteries during the periods of low demand seems an expensive option, especially when dealing with large scale power generation. Due to incessantly varying nature of wind speed, it is not feasible to rely only on wind power for cheap power production. Also, it is not thriftily possible to construct separate transmission line. However if we integrate wind power with hydro power, we can utilize the maximum possible transmission capacity. Existing hydro power station operating in that area or pumped storage scheme can be used. This paper is an attempt to analyze coordination of wind generation with hydro power in those areas of Pakistan where both wind and hydro power sources exist. In this paper, different issues have been analyzed taking case study of Dargai. This paper is first attempt in Pakistan about integration of wind and hydro power to draw some general conclusions and to point out some areas in which further research can be done.

Research on hydraulic wind turbine semi-physical simulation platform

According to a research on the 30kVA simulation experimental platform of hydraulic wind tur- bine, its basic structure, composition and operation principle are expounded in this paper. An in- verter motor is used to simulate the wind turbine, while a similarity calculation method is applied be- tween the small and large wind turbine. A fixed displacement pump-variable motor closed loop is used as the main transmission system, and a self-excited synchronous generator generates electricity through the grid connection. The experiment and simulation study on the speed and power control of the hydraulic wind turbine is conducted, based on the experimental platform, thus correctness and progressiveness of the experiment platform is further verified. The experimental platform study lays a foundation for further research on the characteristics of hydraulic wind turhln~

Using of High Altitude Wind Energy

Ground based, wind energy extraction systems have reached their maximum capability. The limitations of current de-signs are: wind instability, high cost of installations, and small power output of a single unit. The wind energy industry needs of revolutionary ideas to increase the capabilities of wind installations. This article suggests a revolutionary innovation which produces a dramatic increase in power per unit and is independent of prevailing weather and at a lower cost per unit of energy extracted. The main innovation consists of large free-flying air rotors positioned at high altitude for power and air stream stability, and an energy cable transmission system between the air rotor and a ground based electric generator. The air rotor system flies at high altitude up to 14 km. A stability and control is provided and systems enable the changing of altitude. This article includes six examples having a high unit power output (up to 100 MW). The proposed examples provide the following main advantages: 1) Large power production capacity per unit—up to 5,000 - 10,000 times more than conventional ground-based rotor designs;2) The rotor operates at high altitude of 1 - 14 km, where the wind flow is strong and steady;3) Installation cost per unit energy is low;4) The installation is environmentally friendly (no propeller noise).

Challenges of Power Delivery from Jiuquan Wind Power Base

The 10-GW-class Jiuquan Wind Power Base in Gansu Province is to get its Phase I Project completed soon, and will further expand and become the world largest wind power base in the future. Whether electricity from the wind power base can be delivered on such a large scale becomes the focus of attention of the world. This paper analyzes four challenges facing the wind power base, including transmission capability, peak regulation and frequency modulation, capacity balance and generation accommodation, as well as system stability.

基于遗传算法的风电齿轮传动系统参数优化设计

齿轮箱是风力发电系统的重要部件,其体积大、重量高等问题制约了风电清洁能源的发展.以1.5 WM风力发电机组为研究对象,建立齿轮传动系统轻量化数学模型,并采用遗传算法进行优化求解.结果表明,采用遗传算法是可行的,优化后齿轮传动系统体积减少了4.59%,这将进一步减小齿轮传动系统箱体体积和总质量.通过计算行星轮系的传动效率,验证了优化结果的可行性,该研究将为风电齿轮传动系统轻量化设计提供新方法.

Analysis of Short Circuit Faults in a System Fed by Wind Turbine

Short circuit and ground failures that are quite common in power transmission lines are investigated. These failures are designed considering a system that is supplied by this wind system, and analyses are interpreted. In the study, a system is set up and it is fed by the wind turbine. Furthermore, the mathematical model of wind turbine and generator is prepared and the results obtained from the simulation are evaluated. The short circuit and ground fault analyzes were performed separately for each of the three phases. ATP （alternative transient program）-EMTP （electromagnetic transients program） program is used in the analysis and the results obtained were found to be quite compatible.