A Fuzzy Logical MPPT Control Strategy for PMSG Wind Generation Systems

Making full use of wind power is one of the main purposes of the wind turbine generator control. Conventional hill climbing search （HCS） method can realize the maximum power point tracking （MPPT）. However, the step size of HCS method is constant so that it cannot consider both steady-state response and dynamic response. A fuzzy logical control （FLC） algorithm is proposed to solve this problem in this paper, which can track the maximum power point （MPP） quickly and smoothly. To evaluate MPPT algorithms, four performance indices are also proposed in this paper. They are the energy captured by wind turbine, the maximum power-point tracking time when wind speed changes slowly, the fluctuation magnitude of real power during steady state, and the energy captured by wind turbine when wind speed changes fast. Three cases are designed and simulated in MATLAB/Simulink respectively. The comparison of the three MPPT strategies concludes that the proposed fuzzy logical control algorithm is more superior to the conventional HCS algorithms.

Review of the Analysis and Suppression for High-frequency Oscillations of the Grid-connected Wind Power Generation System

High-frequency oscillation(HFO)of gridconnected wind power generation systems(WPGS)is one of the most critical issues in recent years that threaten the safe access of WPGS to the grid.Ensuring the WPGS can damp HFO is becoming more and more vital for the development of wind power.The HFO phenomenon of wind turbines under different scenarios usually has different mechanisms.Hence,engineers need to acquire the working mechanisms of the different HFO damping technologies and select the appropriate one to ensure the effective implementation of oscillation damping in practical engineering.This paper introduces the general assumptions of WPGS when analyzing HFO,systematically summarizes the reasons for the occurrence of HFO in different scenarios,deeply analyses the key points and difficulties of HFO damping under different scenarios,and then compares the technical performances of various types of HFO suppression methods to provide adequate references for engineers in the application of technology.Finally,this paper discusses possible future research difficulties in the problem of HFO,as well as the possible future trends in the demand for HFO damping.

An Overview of Research on Optimization of Integrated Solar/Wind Power Generation Systems

Although transmission systems are able to cover most of the areas in many countries, there are still some isolated areas such as rural counties and remote desert lands where grid power cannot be accessed. Therefore, a reliable and economical power supply scheme is required to solve the problem. One of them combines wind/solar power generation with the support of storage system. This paper is to give an overview of the optimization methodologies about the wind/solar stand-alone system supported by storage systems or integrating with other renewable or conventional power generation sources. It is shown that continued research and optimization methodology in this area are still in great need for performance improvement.

Capacity Optimization Configuration of Hydrogen Production System for Offshore Surplus Wind Power

To solve the problem of residual wind power in offshore wind farms,a hydrogen production system with a reasonable capacity was configured to enhance the local load of wind farms and promote the local consumption of residual wind power.By studying the mathematical model of wind power output and calculating surplus wind power,as well as considering the hydrogen production/storage characteristics of the electrolyzer and hydrogen storage tank,an innovative capacity optimization allocation model was established.The objective of the model was to achieve the lowest total net present value over the entire life cycle.The model took into account the cost-benefit breakdown of equipment end-of-life cost,replacement cost,residual value gain,wind abandonment penalty,hydrogen transportation,and environmental value.The MATLAB-based platform invoked the CPLEX commercial solver to solve the model.Combined with the analysis of the annual average wind speed data from an offshore wind farm in Guangdong Province,the optimal capacity configuration results and the actual operation of the hydrogen production system were obtained.Under the calculation scenario,this hydrogen production system could consume 3,800 MWh of residual electricity from offshore wind power each year.It could achieve complete consumption of residual electricity from wind power without incurring the penalty cost of wind power.Additionally,it could produce 66,500 kg of green hydrogen from wind power,resulting in hydrogen sales revenue of 3.63 million RMB.It would also reduce pollutant emissions from coal-based hydrogen production by 1.5 tons and realize an environmental value of 4.83 million RMB.The annual net operating income exceeded 6 million RMB and the whole life cycle NPV income exceeded 50 million RMB.These results verified the feasibility and rationality of the established capacity optimization allocation model.The model could help advance power system planning and operation research and assist offshore wind farm operators in improving economic and environmental benefits.

A Temporary Frequency Response Strategy Using a Voltage Source-Based PermanentMagnet Synchronous Generator and Energy Storage Systems

Energy storage systems(ESS)and permanent magnet synchronous generators(PMSG)are speculated to be able to exhibit frequency regulation capabilities by adding differential and proportional control loops with different control objectives.The available PMSG kinetic energy and charging/discharging capacities of the ESS were restricted.To improve the inertia response and frequency control capability,we propose a short-term frequency support strategy for the ESS and PMSG.To this end,the weights were embedded in the control loops to adjust the participation of the differential and proportional controls based on the system frequency excursion.The effectiveness of the proposed control strategy was verified using PSCAD/EMTDC.The simulations revealed that the proposed strategy could improve the maximum rate of change of the frequency nadir and maximum frequency excursion.Therefore,it provides a promising solution of ancillary services for frequency regulation of PMSG and ESS.

Wind Generation Modeling for Transmission Systems Adequacy Studies with Economic Dispatch

In this paper, a strategy is proposed in order to introduce in a realistic way wind generation into a HL11 （bulk power system） non sequential Monte Carlo adequacy study with economic dispatch. Thanks to the implemented solution, wind generation is consequently confronted to operational constraints related to high powered thermal units, nuclear parks or thermal machines with technical minimum value. Moreover, during each simulated system state, a DC load flow is also calculated in order to evaluate reinforcements optimizing the large scale integration of wind power production. The simulation tool modified during the present work is called Scanner and is the property of Tractebel Engineering （Gaz de France-Suez） company. It has been here applied to an academic test system： the Roy Billinton Test System （RBTS）.

Wind Generation in the Argentine Power System

Energy policy is an essential part of the economy and the society. In some countries, there is a lack of a regulatory framework, which must be clear and practicable to allow new technologies to compete with the conventional way of generation. This is the problem in Argentine, the lack of a regulatory framework that can regulate the insertion of wind energy into the Argentine power system （SADI）. In this paper, a review of typical incentives for the installation of wind farms in the world, and a review of some laws and policies in Argentine are presented. Also financial and economic issues that are related to the installation of wind farms are analyzed, and some recommendations related to the topics are presented in this paper.

Dynamic Simulation of Novel Small Wind Turbine Generation System with SynRG

This paper describes a small wind turbine generation system with SynRG （synchronous reluctance generator）. SynRGs are robust and inexpensive. In addition, SynRG has no cogging torque. Hence, wind turbine generation system with SynRG can achieve smooth start at low wind velocity. The rotor design of proposed SynRG is multi flux barrier type. With FEA （finite element analysis） software, the characteristics of SynRG are brought out, and the performance of wind turbine generation system with SynRG including copper loss and iron loss is simulated by FEA coupled with the motion equation of the wind turbine generation system under the maximum power point tracking control. In this paper, the constant wind test and the quasi-natural wind test are conducted. In conclusion, the results of these simulations indicate that the wind turbine generation system with SynRG has good performance, especially in starting phenomena.

Difference between grid connections of large-scale wind power and conventional synchronous generation

In China, regions with abundant wind energy resources are generally located at the end of power grids. The power grid architecture in these regions is typically not sufficiently strong, and the energy structure is relatively simple. Thus, connecting large-capacity wind power units complicates the peak load regulation and stable operation of the power grids in these regions. Most wind turbines use power electronic converter technology, which affects the safety and stability of the power grid differently compared with conventional synchronous generators. Furthermore, fluctuations in wind power cause fluctuations in the output of wind farms, making it difficult to create and implement suitable power generation plans for wind farms. The generation technology and grid connection scheme for wind power and conventional thermal power generation differ considerably. Moreover, the active and reactive power control abilities of wind turbines are weaker than those of thermal power units, necessitating additional equipment to control wind turbines. Hence, to address the aforementioned issues with large-scale wind power generation, this study analyzes the differences between the grid connection and collection strategies for wind power bases and thermal power plants. Based on this analysis, the differences in the power control modes of wind power and thermal power are further investigated. Finally, the stability of different control modes is analyzed through simulation. The findings can be beneficial for the planning and development of large-scale wind power generation farms.

Research on Power Control of Wind Power Generation Based on Neural Network Adaptive Control

For the characteristics of wind power generation system is multivariable, nonlinear and random, in this paper the neural network PID adaptive control is adopted. The size of pitch angle is adjusted in time to improve the perfomance of power control. The PID parameters are corrected by the gradient descent method, and Radial Basis Functiion （RBF） neural network is used as the system identifier in this method. Sinlation results show that by using neural network adaptive PID controller the generator power control can inhibit effectively the speed and affect the output prover of generator. The dynamic performnce and robustness of the controlled system is good, and the peformance of wind power system is improved.

Wind Energy Generation and Assessment of Resources in India

The gap between energy demand and its generation is constantly widening. People have started giving more emphasis on renewable sources of energy. This paper presents the estimation of potential for wind energy generation maps based on fixed wind turbine capacity. Although wind energy has developed substantially in recent years, we have only wind speed and wind potential density maps. Our attempt here is to generate wind energy generation potential maps. Major step in achieving this goal is modeling of wind energy conversion system using TRNSYS software. The model consists of three main components namely the weather, the turbines and energy conversion parameters. The weather data are provided from the meteorological database, namely Meteonorm. The simulated output is compared with actual wind generation of wind farms. After comparing our model results with the existing wind energy generation data, we have extended to compute the wind energy generation for all locations in India. For simulation, 4691 locations are identified considering 0.25° × 0.25° interval. The energy generation simulated data are compiled and developed into maps that are useful to all wind energy developers. The data generated and presented in the form of maps are for all the 30 states of India.

New energy power generation-wind power generation

This paper introduced the status quo of wind power and wind power generation technology. Focusing on the introduction of wind power generating system ibrational self-consistent field（VSCF）, program implementation included Alternating Current （AC）-Direct Current （DC）-AC conversion system, magnetic field modulation generator system, doubly-fed generator system etc. Among these, doubly-fed generator system is the trend. Where to build the wind farm is very important, so a perfect site is needed. Wind power generation will have a bright future. As long as the wind power can be linked to the grid in large scale.

Design and Implementation of Bi-Directional DC-DC Converter for Wind Energy System

This paper proposes a design and implementation of the bi-directional DC-DC converter for Wind Energy Conversion System. The proposed project consists of boost DC/DC converter, bi-directional DC/DC converter (BDC), permanent magnet DC generator and batteries. A DC-DC boost converter is interface with proposed wind system to step up the initial generator voltage and maintain constant output voltage. The fluctuation nature of wind makes them unsuitable for standalone operation. To overcome the drawbacks an energy storage device is used in the proposed system to compensate the fluctuations and to maintain a smooth and continuous power flow in all operating modes to load. Bi-directional DC-DC converter (BDC) is capable of transforming energy between two DC buses. It can operate as a boost converter which supplies energy to the load when the wind generator output power is greater than the required load power. It also operates in buck mode which charges from DC bus when output power is less than the required load power. The proposed converter reduces the component losses and increases the performance of the overall system. The complete system is implemented in MATLAB/SIMULINK and verified with hardware.

Hydrodynamic Characteristics of New Floating Wind-Wave Energy Combined Power Generation Devices Under Typhoon-Wave-Current Coupling

The South China Sea is rich in wind and wave energy resources,and the wind-wave combined power generation device is currently in the concept research and development stage.In recent years,extreme sea conditions such as super typhoons have frequently occurred,which poses a serious challenge to the safety of offshore floating platforms.In view of the lack of safety analysis of wind-wave combined power generation devices in extreme sea conditions at present,this paper takes the OC4-WEC combined with semi-submersible wind turbine(Semi-OC4)and the oscillating buoy wave energy converter as the research object,and establishes a mesoscale WRF-SWANFVCOM(W-S-F)real-time coupling platform based on the model coupling Toolkit(MCT)to analyze the spatial and temporal evolution of wind-wave-current in offshore wind farms during the whole process of super typhoon“Rammasun”transit.Combined with the medium/small scale nested method,the flow field characteristics of OC4-WEC platform are analyzed.The results show that the simulation accuracy of the established W-S-F platform for typhoon track is 42.51%higher than that of the single WRF model.Under the action of typhoon-wave-current,the heave motion amplitude of OC4-WEC platform is reduced by 38.1%,the surge motion amplitude is reduced by 26.7%,and the pitch motion amplitude is reduced by 23.4%.

Harmonic Reduction in Wind Power Generating System Using Shunt Active Filter with SPWM Technique

Due to environmental conditions, the wind power generation is fluctuating in nature. This affects the electrical network interconnected with these systems. When the wind power generators are connected to the nonlinear loads, there is distortion in the waveform. These distortions should be within limits according to national and international guidelines framed for power quality. This paper presents a mitigation technique with a shunt active filter, which reduces harmonic distortion to the permitted limit. Sine pulse width modulation (SPWM) control scheme is used to control shunt active filter. This technique eliminates harmonic distortion and maintains unity power factor. The simulation for proposed method is carried out using MATLAB/SIMULINK and results are validated.

Inner Mongolia builds up world's class wind power generation farm

The first phase project of Huitengxile Wind Power Generation Farm in Inner Mongolia, with nine 600 kW wind power generators installed, was formally put into commercial operation on November 28,

Risk-averse Robust Interval Economic Dispatch for Power Systems with Large-scale Wind Power Integration

This paper presents a robust interval economic dispatch(RIED)model for power systems with large-scale wind power integration.Differing from existing interval optimization(IO)approaches that merely rely on the upper and lower boundaries of random variables,the distribution information retained in the historical data is introduced to the IO method in this paper.Based on the available probability distribution function(PDF),wind power curtailment and load shedding are quantified as the operational risk and incorporated into the decision-making process.In this model,we need not rely on the forecasted value of wind power,which is randomly fluctuating and quite unpredictable.Furthermore,when the PDFs of wind power are taken into account,the resulting dispatch solution makes a good tradeoff between the generation cost and the operational risk.Finally,the RIED model yields an optimal dispatch solution for thermal units and the allowable intervals of wind power for the wind farms,which efficiently mitigates the uncertainty in wind power generation and provides more practical suggestions for system operators.Simulation studies are conducted on a modified IEEE-118 bus system and the results verify the effectiveness of the proposed RIED model.