Installation position determination of wind speed sensors on steel pole along a high-speed railway

In order to consider the influence of steel pole on the measurement of wind speed sensors and determinate the installation position of wind speed sensors, the flow field around wind speed sensors was investigated. Based on the three-dimensional steady Reynolds-averaged Navier-Stokes equations and k-ε double equations turbulent model, the field flow around the wind speed sensor and the steel pole along a high-speed railway was simulated on an unstructured grid. The grid-independent validation was conducted and the accuracy of the present numerical simulation method was validated by experiments and simulations carried out by previous researchers. Results show that the steel pole has a significant influence on the measurement results of wind speed sensors. As the distance between two wind speed sensors is varied from 0.3 to 1.0 m, the impact angles are less than ±20°, it is proposed that the distance between two wind speed sensors is 0.8 m at least, and the interval between wind speed sensors and the steel pole is more than 1.0 m with the sensors located on the upstream side.

Design and Data Analysis of a New Type of Antifreezing Cup-Type Wind Velocity Sensor

In most areas of China, affected by the environment of low temperature and high humidity, the wind speed sensor and wind direction sensor are frozen and cannot output data in autumn, winter or the alternation of winter and spring. In order to solve the freezing situation of the wind sensor, this paper designs a new type of antifreeze wind speed sensor. After meteorology performance testing and field observation tests, the correlation coefficient of the observation data is demonstrated, and the data curve is fitted. The result shows the sensor is stable, and has a good antifreeze effect, the data output is reliable.

Influence of Laboratory Environment on the Verification Results of EL15-1A Type of Wind Speed Sensor

According to the verification regulation of the Wind Direction and Wind Speed Sensor of Automatic Meteorological Station[JJG(meteorological)004-2011],relying on the wind tunnel laboratory of Hebei meteorological measurement station,EL15-1 A type of wind speed sensor in the automatic weather station was verified.The experimental data of sensor verification in different laboratory environments were obtained through data comparison.Using standard wind speed measurement formula,the influence of laboratory temperature,humidity and air pressure on verification results was analyzed quantitatively.The results showed that laboratory temperature had the greatest influence on the verification results of this type of sensor,while the humidity and air pressure had less influence.Therefore,it should be noted that the temperature change in the laboratory should not be too large in the process of verification,so as to improve the accuracy of the verification results.

Breeze-activated wind speed sensor with ultra-low friction resistance for self-powered gale disaster warning

The early warning and monitoring of gale disasters are very important for the safety of people’s lives and properties. Triboelectric nanogenerators(TENGs) are popular for wind speed sensors due to their self-powered property. However, a TENG cannot easily work at low wind speeds due to the limitation of the high frictional resistance structure. In this paper, a TENG-based breezeactivated wind speed sensor(BAWS) with an ultra-low frictional resistance is proposed. The key drive unit of the BAWS is a Savonius-like vertical axis wind turbine, which is fabricated by arrayed airfoil profile blades with excellent flow field characteristics. Here a wind turbine plays dual roles in driving the electromagnetic generator below it to supply energy and lead the TENG above it to sense the wind force. Compared to a classical turbine with a wind cup, the designed turbine has a low resistance torque. The synergistic effect of the drive unit with low-resistance and triboelectric materials with low viscosity allows the BAWS to be activated even at a wind speed of 2.9 m/s. The sensitivities of the voltage frequency and current amplitude of the TENG are used to reflect the electrical property of the BAWS. The measured values are 0.291 Hz/(m·s-1) and 0.221 μA/(m·s-1),which reflects the good sensitivity of the BAWS. Moreover, the linearity of the BAWS reaches up to 0.991, which shows an accurate output for the wind speed. In addition, the device is equipped with a combined electromagnetic-solar unit as the sole power source to meet the sensor’s all-weather operation requirements. This work expands the application prospects of selfpowered sensing technology in the field of disaster warning.

Ceramic thermal wind sensor based on advanced direct chip attaching package

An advanced direct chip attaching packaged two-dimensional ceramic thermal wind sensor is studied. The thermal wind sensor chip is fabricated by metal lift-off processes on the ceramic substrate. An advanced direct chip attaching （DCA） packaging is adopted and this new packaged method simplifies the processes of packaging further. Simulations of the advanced DCA packaged sensor based on computational fluid dynamics （CFD） model show the sensor can detect wind speed and direction effectively. The wind tunnel testing results show the advanced DCA packaged sensor can detect the wind direction from 0° to 360° and wind speed from 0 to 20 m/s with the error less than 0.5 m/s. The nonlinear fitting based least square method in Matlab is used to analyze the performance of the sensor.

Numerical investigation and optimal design of fiber Bragg grating based wind pressure sensor

A wind pressure sensor based on fiber Bragg grating （FBG） for engineering structure was investigated in this paper. We established a transaction model of wind pressure to strain and proposed a method of temperature compensation. By finite element analysis, the basic parameters of the sensor were optimized with the aim of maximum strain under the basic wind pressure proposed in relative design code in China taking geometrical non-linearity into consideration. The result shows that the wind pressure sensor we proposed is well performed and have good sensing properties, which means it is a technically feasible solution.