A wind tunnel simulation of the dynamic processes involved in sand dune formation on the western coast of Hainan Island

The western coast of Hainan Island exhibits a savanna landscape. Many types of sand dunes, including transverse dune ridges, longitudinal dune ridges, elliptical dunes, coppice dunes, and climbing dunes, are widely distributed in the coastal zone. In winter, high-frequency and high-energy NE winds （dominant winds） are prevalent, with a resultant drift direction （RDD） of S35.6°W. In spring, low-frequency and low-energy SW secondary winds prevail, with a RDD of N25.1°E. Wind tunnel simulations revealed that the airflow over the dune surface is the main factor controlling the erosion and deposition patterns of dune surfaces and the morphological development of dunes. In the region＇s bidirectional wind environment, with two seasonally distinct energy levels, the airflow over the surface of elliptical dunes, barchan dunes, and transverse dune ridges will exhibit a transverse pattern, whereas the airflow over longitudinal dunes ridges exhibits a lateral pattern and that over climbing dunes exhibits a climbing-circumfluent pattern. These patterns represent different dynamic processes. The coastal dunes on the western coast of Hainan Island are influenced by factors such as onshore winds, sand sources, coastal slopes, rivers, and forest shelter belts. The source of the sand that supplements these dunes particularly influences the development pattern： when there is more sand, the pattern shows positive equilibrium deposition between dune ridges and dunes; otherwise, it shows negative equilibrium deposition. The presence or absence of forest shelter belts also influences deposition and dune development patterns and transformation of dune forms. Coastal dunes and inland desert dunes experience similar dynamic processes, but the former have more diversified shapes and more complex formation mechanisms.

Thermodynamic Effects on Particle Movement:Wind Tunnel Simulation Results

Sand/dust storms are some of the main hazards in arid and semi-arid zones. These storms also influence global environmental changes. By field observations, empirical statistics, and numerical simulations, pioneer researchers on these natural events have concluded the existence of a positive relationship between thermodynamic effects and sand/dust storms. Thermodynamic effects induce an unsteady stratified atmosphere to influence the process of these storms. However, studies on the relationship of thermodynamic effects with particles (i.e., sand and dust) are limited. In this article, wind tunnel with heating was used to simulate the quantitative relationship between thermodynamic effects and particle movement on different surfaces. Compared with the cold state, the threshold wind velocity of particles is found to be significantly decrease under the hot state. The largest decrease percentage exceedes 9% on fine and coarse sand surfaces. The wind velocity also has a three-power function in the sand transport rate under the hot state with increased sand transport. Thermodynamic effects are stronger on loose surfaces and fine particles, but weaker on compacted surfaces and coarse particles.

Wind tunnel simulation of the effects of freeze–thaw cycles on soil erosion in the Qinghai–Tibet Plateau

Intense freezing and thawing actions occur in the Qinghai-Tibet Plateau because of its high elevation and cold temperature. The plateau＇s unique environment makes it easy to generate wind erosion under dry, windy weather conditions, resulting in the emergence ofdesertification. As a major form of freeze-thaw erosion, freeze-thaw and wind erosion is displayed prominently on the Qinghai-Tibet Plateau. Therefore, in this study, soil samples were collected from the surface of the plateau to undergo freeze-thaw and wind erosion simulation experiments. Results show that wind erosion strength increases with an increasing number of freeze-thaw cycles, water content in the freezing-thawing process, and the difference in freeze-thaw temperatures. Therefore, in the conditions of water participation, the main reason for the freeze-thaw and wind erosion in the Qinghai-Tibet Plateau is the damage to the soil structure by repeated, fierce freeze-thaw actions, and the sand-bearing wind is the main driving force for this process. The research results have theoretical significance for exploring the formation mechanism of freeze-thaw and wind erosion in the Qinghai-Tibet Plateau, and provide a scientific basis for freeze-thaw desertification control in the plateau.

Optimization Design of Open Spaces Based on Wind Tunnel and CFD Simulation： Case Study of a Street Canyon in Northern China

Airflow in open spaces can significantly affect spatial quality. Therefore, according to the type of building structures, the airflow also has different forms. Studies have been conducted on the relation between airflow and pedestrian comfort; however, only few of them have focused on comprehensive urban planning that considers different weather conditions and people＇s ability to adapt. This research focuses on the differences in wind conditions caused by different spatial forms in different seasons. On the basis of a field survey in both summer and winter in a public open space, evaluation standards developed from environmental meteorological data and public feedback were used to evaluate simulation results. Next, several assumptions about canyon orientation and building types were proposed. Wind tunnel and CFD （computational fluid dynamics） simulations were conducted to evaluate the assumptions. The results showed that the canyon orientation significantly affected overall wind conditions and different building structures affected airflow. This research also provides a method to evaluate urban areas that have complicated wind environments.

Wind tunnel simulation of wind loading on a solid structure of revolution

The wind tunnel simulations of wind loading on a solid structure of revolution with one smooth and five rough surfaces were conducted using wind tunnel tests. Timemean and fluctuating pressure distributions on the surface were obtained, and the relationships between the roughness Reynolds number and pressure distributions were analyzed and discussed. The results show that increasing the surface roughness can significantly affect the pressure distribution, and the roughness Reynolds numbers play an important role in the change of flow patterns. The three flow patterns of subcritical, critical and supercritical flows can be classified based on the changing patterns of both the mean and the fluctuating pressure distributions. The present study suggests that the wind tunnel results obtained in the supercritical pattern reflect more closely those of full-scale solid structure of revolution at the designed wind speed.

Parameter optimization for improved aerodynamic performance of louver-type wind barrier for train-bridge system

To improve the safety of trains running in an undesirable wind environment,a novel louver-type wind barrier is proposed and further studied in this research using a scaled wind tunnel simulation with 1:40 scale models.Based on the aerodynamic performance of the train-bridge system,the parameters of the louver-type wind barrier are optimized.Compared to the case without a wind barrier,it is apparent that the wind barrier improves the running safety of trains,since the maximum reduction of the moment coefficient of the train reaches 58%using the louver-type wind barrier,larger than that achieved with conventional wind barriers(fence-type and grid-type).A louver-type wind barrier has more blade layers,and the rotation angle of the adjustable blade of the louver-type wind barrier is 90–180°(which induces the flow towards the deck surface),which is more favorable for the aerodynamic performance of the train.Comparing the 60°,90°and 120°wind fairings of the louver-type wind barrier blade,the blunt fairing is disadvantageous to the operational safety of the train.

On the influence of sand-wind on atmospheric environment

The authors seek, through tests on simulated sand samples in a wind tunnel and analysis of minerals combination and trace elements, to discover the environmental implications of flying-up, falling-down and concentration variation as a function of natural wind speed and direction, distance of movement, range and extent of influence on the atmospheric environment, of micro-granular components on the ground surface in the Keerqin desert area in northwest Liaoning Province of China.

An investigation of the effects of dust storms on rat lung using HRCT and blood gas analysis

The increasing intensity and frequency of sand-dust storms in China has led to greater prominence of associated environmentaland health issues. Many studies have focused on the health effects of air particulate contaminants, but fewformal investigations have studied the effects of sand-dust storms on human and animal health. The aim of this study wasto investigate the effects of dust storms on rat lung by using high resolution computed tomography （HRCT） and blood gasanalysis through a wind tunnel simulating. We found that the rat lung damage effects can be detected by the HRCT imagingafter exposure to sand-dust storm environments, but had no obvious result through blood gas analysis. Exposure durationspositively correlated with the damage degree to lung tissue. These will provide some evidence for clinical diagnosis ofnon-occupational pneumoconiosis.

Wind tunnel simulation experiment and investigation on the electrification of sandstorms

Electric discharge phenomenon is often observed during the passage of sandstorms over desert regions and sometimes does great damage to human beings. Based on previous researches on the electrification of sandstorms by the scholars both at home and aboard,the authors conducted the simulation experiments on the electric fields of sandstorm-triggered creeping-saltating sand, suspending sand and watered suspending sand in the large-scale wind tunnel. According to the experimental results the electric field structure and its formation mechanism were analysed and discussed, the quantity of electric charges and electric field strengthwere measured and calculated, and finally several conclusions were drawn.

REYNOLDS NUMBER EFFECTS IN TALL BUILDING WIND TUNNEL TESTS

In wind tunnel tests of tall building models comprised of rounded or streamlined surfaces, Reynolds Number Effects (RNE) may be remarkable. In most researches and projects, owing to the presence of sharp edged corners at model, RNE was often treated as negligible, and data colleCted in subcritical flow regime were applied directly to designs which were sure to be supercritical without any modification. But it was proved necessary to take RNE into consideration when a model had predominant rounded smooth surface(s). Some research activities were devoted to the mentioned condition and two experimental techniques accompanied by two wind tunnel model tests were introduced in the article. The authors also presented some amusing phenomenon such as extremely low pressure coefficients caused by the separating bubbles when now past sharp edged corners, unsymmetrical pressure coefficient distributions commenced by biased gap f'low (seen Figs. 3, 4) while models were placed symmetrically in the approaching flow.

Experiment and numerical simulation on the characteristics of fluid–structure interactions of non-rigid airships

Fluid-structure interaction is an important issue for non-rigid airships with inflated envelopes. In this study, a wind tunnel test is conducted, and a loosely coupled procedure is correspondingly established for numerical simulation based on computational fluid dynamics and nonlinear finite element analysis methods. The typical results of the numerical simulation and wind tunnel experiment, including the overall lift and deformation, are in good agreement with each other. The results obtained indicate that the effect of fluid-structure interaction is noticeable and should be considered for non-rigid airships. Flow- induced deformation can further intensify the upward lift force and pitching moment, which can lead to a large deformation. Under a wind speed of 15 m/s, the lift force of the non-rigid model is increased to approximatelv 60% compared with that of the rigid model under a high angle of attack.