For precision machining, the hard turning process is becoming an important alternative to some of the existing grinding processes. This paper presents an analytical model for predicting cutting forces in hard turning ...For precision machining, the hard turning process is becoming an important alternative to some of the existing grinding processes. This paper presents an analytical model for predicting cutting forces in hard turning of 51CRV4 with hardness of 68 HRC. The cutting tool used is made from cubic boron nitride （CBN） with a wiper cutting edge. Formulas for differential chip loads are derived for three different situations, depending on the radial depth of cut. The cutting forces are determined by integrating the differential cutting forces over the tool-workpiece engagement domain. For validation, cutting forces predicted by the model were compared with experimental measurements, and most of the results agree quite well.展开更多
There are about 25 factories specialized in production of windshield wiper in China, reaching total output of nearly 1.9 million sets in 1993. Three of them are of strong production capacity. They are VALEO Wenling Au...There are about 25 factories specialized in production of windshield wiper in China, reaching total output of nearly 1.9 million sets in 1993. Three of them are of strong production capacity. They are VALEO Wenling Auto Parts & Accessories Co. Ltd., Shanghai Industry Traffic Electrical Apparatus Co. Ltd.,展开更多
Objective:This study aimed to explore the clinical efficiency of an improved transosseous pullout suture technique for arthroscopic repair of a meniscus root tear.Methods:From January 2017 to January 2021,53 patients ...Objective:This study aimed to explore the clinical efficiency of an improved transosseous pullout suture technique for arthroscopic repair of a meniscus root tear.Methods:From January 2017 to January 2021,53 patients with posterior meniscus root tears combined with anterior cruciate ligament(ACL)and/or posterior cruciate ligament(PCL)tears were collected.Totally,in 29 patients(group A),the 2.0 mm modified pullout tunnel method was used to suture the posterior meniscus root,while 24 patients(group B)were treated with the traditional 4.5 mm pullout tunnel method.In group A,20 patients had lateral meniscus posterior root(LMPR)combined with ACL tears,5 patients had LMPR combined with ACL and PCL tears,and 4 patients had medial meniscus posterior root(MMPR)combined with ACL tears.In group B,19 patients had LMPR combined with ACL tears,3 patients had LMPR combined with ACL and PCL tears,and 2 patients had MMPR combined with ACL tears.The improvement of the Lysholm and VAS scores and the incidence of complications in group A and group B before the operation,1 month and 3 months after the operation,and after the final follow-up were compared.Results:Preoperative Lysholm score was 26.0±5.6 in group A and 26.7±5.8 in group B(P>0.05).One-month postoperative Lysholm score was 66.5±5.7 in group A and 54.3±2.4 in group B(P<0.001).Three-month postoperative Lysholm score was 81.1±7.2 in group A and 73.2±9.7 in group B(P<0.05).Lysholm scores after the final follow-up was 90.3±5.6 in group A and 90.0±5.0 in group B(P>0.05).Preoperative VAS score was 6.3±1.4 in group A and 6.3±1.2 in group B(P>0.05).One-month postoperative VAS score was 1.8±0.7 in group A and 2.4±0.9 in group B(P<0.05).Three-month postoperative VAS score was 0.7±0.6 in group A and 0.8±0.6 in group B(P>0.05).VAS score after the final follow-up was 0.2±0.4 in group A and 0.3±0.5 in group B(P>0.05).Conclusion:The improved transosseous pullout suture technique using a smaller 2.0 mm bone tunnel can virtually eliminate the risk of conflict with other bone tunnels and facilitate the management of bone tunnels in multiple ligament injuries,while also diminishing suture abrasion caused by the windshield wiper effect.The technique achieves good clinical efficacy.展开更多
基金Supported by the DAAD (German Academic Exchange Service) on its exchange student program
文摘For precision machining, the hard turning process is becoming an important alternative to some of the existing grinding processes. This paper presents an analytical model for predicting cutting forces in hard turning of 51CRV4 with hardness of 68 HRC. The cutting tool used is made from cubic boron nitride （CBN） with a wiper cutting edge. Formulas for differential chip loads are derived for three different situations, depending on the radial depth of cut. The cutting forces are determined by integrating the differential cutting forces over the tool-workpiece engagement domain. For validation, cutting forces predicted by the model were compared with experimental measurements, and most of the results agree quite well.
文摘There are about 25 factories specialized in production of windshield wiper in China, reaching total output of nearly 1.9 million sets in 1993. Three of them are of strong production capacity. They are VALEO Wenling Auto Parts & Accessories Co. Ltd., Shanghai Industry Traffic Electrical Apparatus Co. Ltd.,
基金supported by the Natural Science Foundation of Hubei Province(No.2018CFC832).
文摘Objective:This study aimed to explore the clinical efficiency of an improved transosseous pullout suture technique for arthroscopic repair of a meniscus root tear.Methods:From January 2017 to January 2021,53 patients with posterior meniscus root tears combined with anterior cruciate ligament(ACL)and/or posterior cruciate ligament(PCL)tears were collected.Totally,in 29 patients(group A),the 2.0 mm modified pullout tunnel method was used to suture the posterior meniscus root,while 24 patients(group B)were treated with the traditional 4.5 mm pullout tunnel method.In group A,20 patients had lateral meniscus posterior root(LMPR)combined with ACL tears,5 patients had LMPR combined with ACL and PCL tears,and 4 patients had medial meniscus posterior root(MMPR)combined with ACL tears.In group B,19 patients had LMPR combined with ACL tears,3 patients had LMPR combined with ACL and PCL tears,and 2 patients had MMPR combined with ACL tears.The improvement of the Lysholm and VAS scores and the incidence of complications in group A and group B before the operation,1 month and 3 months after the operation,and after the final follow-up were compared.Results:Preoperative Lysholm score was 26.0±5.6 in group A and 26.7±5.8 in group B(P>0.05).One-month postoperative Lysholm score was 66.5±5.7 in group A and 54.3±2.4 in group B(P<0.001).Three-month postoperative Lysholm score was 81.1±7.2 in group A and 73.2±9.7 in group B(P<0.05).Lysholm scores after the final follow-up was 90.3±5.6 in group A and 90.0±5.0 in group B(P>0.05).Preoperative VAS score was 6.3±1.4 in group A and 6.3±1.2 in group B(P>0.05).One-month postoperative VAS score was 1.8±0.7 in group A and 2.4±0.9 in group B(P<0.05).Three-month postoperative VAS score was 0.7±0.6 in group A and 0.8±0.6 in group B(P>0.05).VAS score after the final follow-up was 0.2±0.4 in group A and 0.3±0.5 in group B(P>0.05).Conclusion:The improved transosseous pullout suture technique using a smaller 2.0 mm bone tunnel can virtually eliminate the risk of conflict with other bone tunnels and facilitate the management of bone tunnels in multiple ligament injuries,while also diminishing suture abrasion caused by the windshield wiper effect.The technique achieves good clinical efficacy.
