Wireless information and power transfer(WIPT) enables simultaneously communications and sustainable power supplement without the erection of power supply lines and the replacement operation of the batteries for the te...Wireless information and power transfer(WIPT) enables simultaneously communications and sustainable power supplement without the erection of power supply lines and the replacement operation of the batteries for the terminals. The application of WIPT to the underwater acoustic sensor networks(UWASNs) not only retains the long range communication capabilities, but also provides an auxiliary and convenient energy supplement way for the terminal sensors, and thus is a promising scheme to solve the energy-limited problem for the UWASNs. In this paper, we propose the integration of WIPT into the UWASNs and provide an overview on various enabling techniques for the WIPT based UWASNs(WIPT-UWASNs) as well as pointing out future research challenges and opportunities for WIPT-UWASNs.展开更多
In this paper a new method to improve performance of cooperative underwater acoustic (UWA) sensor networks will be introduced. The method is based on controlling and optimizing carrier frequencies which are used in da...In this paper a new method to improve performance of cooperative underwater acoustic (UWA) sensor networks will be introduced. The method is based on controlling and optimizing carrier frequencies which are used in data links between network nods. In UWA channels Pathloss and noise power spectrum density (psd) are related to carrier frequency. Therefore, unlike radio communications, in UWA Communications signal to noise ratio (SNR) is related to frequency besides propagation link length. In such channels an optimum frequency in whole frequency band and link lengths cannot be found. In Cooperative transmission, transmitter sends one copy of transmitted data packets to relay node. Then relay depending on cooperation scheme, amplifies or decodes each data packet and retransmit it to destination. Receiver uses and combines both received signals to estimate transmitted data. This paper wants to propose a new method to decrease network power consumptions by controlling and sub-optimizing transmission frequency based on link length. For this purpose, underwater channel parameters is simulated and analyzed in 1km to 10km lengths (midrange channel). Then link lengths sub categorized and in each category, optimum frequency is computed. With these sub optimum frequencies, sensors and base station can adaptively control their carrier frequencies based on link length and decrease network’s power consumptions. Finally Different Cooperative transmission schemes “Decode and Forward (DF)” and “Amplify and Forward (AF)”, are simulated in UWA wireless Sensor network with and without the new method. In receiver maximum ratio combiner (MRC) is used to combining received signals and making data estimations. Simulations show that the new method, called AFC cooperative UWA communication, can improve performance of underwater acoustic wireless sensor networks up to 40.14%.展开更多
In this paper, an indoor environmental monitoring solution is proposed for the transformer sub- station system by using the ZigBee technology. It mainly analyzes the principle of sulfur hexafluoride sensor based on th...In this paper, an indoor environmental monitoring solution is proposed for the transformer sub- station system by using the ZigBee technology. It mainly analyzes the principle of sulfur hexafluoride sensor based on the acoustic method and puts forward a difference data processing method of single- channel and temperature compensation point at power consumption issues for sensor detection. The method not only reduces the sensor power consumption, but also ensures the accuracy and extends the lifetime of wireless sensor nodes effectively. This paper also analyzes the design of the base sta- tion mode, and demonstrates the running processes of routers and sensors. The feasibility of the pro- posed approach has been testified and proved.展开更多
Wireless Sensor network (WSN) is an emerging technology and has great potential to be employed in critical situations. The development of wireless sensor networks was originally motivated by military applications like...Wireless Sensor network (WSN) is an emerging technology and has great potential to be employed in critical situations. The development of wireless sensor networks was originally motivated by military applications like battlefield surveillance. However, Wireless Sensor Networks are also used in many areas such as Industrial, Civilian, Health, Habitat Monitoring, Environmental, Military, Home and Office application areas. Detection and tracking of targets (eg. animal, vehicle) as it moves through a sensor network has become an increasingly important application for sensor networks. The key advantage of WSN is that the network can be deployed on the fly and can operate unattended, without the need for any pre-existing infrastructure and with little maintenance. The system will estimate and track the target based on the spatial differences of the target signal strength detected by the sensors at different locations. Magnetic and acoustic sensors and the signals captured by these sensors are of present interest in the study. The system is made up of three components for detecting and tracking the moving objects. The first component consists of inexpensive off-the shelf wireless sensor devices, such as MicaZ motes, capable of measuring acoustic and magnetic signals generated by vehicles. The second component is responsible for the data aggregation. The third component of the system is responsible for data fusion algorithms. This paper inspects the sensors available in the market and its strengths and weakness and also some of the vehicle detection and tracking algorithms and their classification. This work focuses the overview of each algorithm for detection and tracking and compares them based on evaluation parameters.展开更多
To design an energy-efficient Medium Access Control(MAC)protocol for the Underwater Wireless Sensor Networks(UWSNs)is an urgent research issue since depleted batteries cannot be recharged or replaced in the underwater...To design an energy-efficient Medium Access Control(MAC)protocol for the Underwater Wireless Sensor Networks(UWSNs)is an urgent research issue since depleted batteries cannot be recharged or replaced in the underwater environment.Moreover,the underwater acoustic channels are affected by hindrances such as long propagation delay and limited bandwidth,which appear in the design of the MAC protocol for the UWSNs.The available MAC protocols for the terrestrial wireless sensor networks exhibit low performance in energy efficiency,throughput and reliability in the UWSNs,and cannot be used in the UWSNs directly because of their unique characteristics.This paper proposes a synchronous duty-cycled reservation-based MAC protocol named Ordered Contention MAC(OCMAC)protocol.The basic mechanism of this protocol is to schedule data transmission by transmitters through the scheduling of Ready To Send(RTS)frames.The protocol eliminates the possible collision during data transmission and improves communication efficiency.The paper analyzes the performance in energy efficiency,throughput and reliability of the protocol by modeling the queuing behavior of OCMAC with a Markov Chain process.Furthermore,the analytical model is validated through a simulation study.The analysis results demonstrated that while providing good throughput and reliability,OCMAC can achieve energy saving.展开更多
In order to achieve the acoustic signal distributed acquisition of stored grain pests, a novel acoustic signal acquisition system was presented based on the wireless sensor networks. And the system architecture, hardw...In order to achieve the acoustic signal distributed acquisition of stored grain pests, a novel acoustic signal acquisition system was presented based on the wireless sensor networks. And the system architecture, hardware configuration, and software were introduced in detail. Considering bandwidth limitation of wireless sensor networks, random sampling algorithm based on the compressed sensing theory was proposed. The developed acoustic signal acquisition system was applied in sampling the crawl acoustic signal of Tribolinm castaneum Herbst adults in granary. Preliminary experimentation indicated the rationality and practicability of the developed system and the proposed algorithm. They can implement the remote, real-time, and reliable wireless transmission for the acoustic signal sampled data of multiple points stored grain pests effectively.展开更多
Wireless technology for underwater communication possesses a wide range of potential application, but it is still a relatively unexplored area in many aspects concerning modems physical design. A step towards future d...Wireless technology for underwater communication possesses a wide range of potential application, but it is still a relatively unexplored area in many aspects concerning modems physical design. A step towards future deployment of underwater networks is the reduction of power consumption. Therefore, asynchronous wakeup systems need to be integrated within the physical layer design while avoiding the use of additional transducers. This paper offers a practical and generic solution to adapt data reception and transmission together with asynchronous wakeup sub-systems in acoustic underwater modem architectures using a low power and low cost solution. The proposal has been implemented in a real prototype with success.展开更多
WSNs （wireless sensor networks） can be used for railway infrastructure inspection and vehicle health monitoring. SHM （structural health monitoring） systems have a great potential to improve regular operation, secu...WSNs （wireless sensor networks） can be used for railway infrastructure inspection and vehicle health monitoring. SHM （structural health monitoring） systems have a great potential to improve regular operation, security and maintenance routine of structures with estimating the state of its health and detecting the changes that affect its performance. This is vital for the development, upgrading, and expansion of railway networks. The work presented in this paper aims at the possible use of acoustic sensors coupled with ZigBee modules for health monitoring of rails. The detection principle is based on acoustic noise correlation techniques. Experiments have been performed in a rail sample to confirm the validity of acoustic noise correlation techniques in the rail. A wireless communication platform prototype based on the ZigBee/IEEE 802.15.4 technology has been implemented and deployed on a rail sample. Once the signals from the structure are collected, sensor data are transmitted through a ZigBee solution to the processing unit.展开更多
A wireless acoustic sensor network was realized using wireless sensor nodes equipped with microphone condensers,in which its sensor nodes were configured to capture poultry sound data and transmit it via the network t...A wireless acoustic sensor network was realized using wireless sensor nodes equipped with microphone condensers,in which its sensor nodes were configured to capture poultry sound data and transmit it via the network to a collection point.A high performance computer can process these large volumes of animal audio signals under different behaviors.By performing data signal processing and analyzing the audio signal,poultry sound can be achieved and then transformed into their corresponding behavioral modes for welfare assessment.In this study,compressive sensing algorithm was developed in consideration of the balance between the power saving from compression ratio and the computational cost,and a low power consumption as well as an inexpensive sensor node was designed as the elementary unit of poultry acoustic data collecting and transmission.Then,a Zigbee-based wireless acoustic sensor network was developed to meet the challenges of short transmission range and limited resources of storage and energy.Experimental results demonstrate that the compressive sensing algorithm can improve the communication performances of the wireless acoustic sensor network with high reliability,low packet loss rate and low energy consumption.展开更多
基金supported in part by the National Natural Science Foundation of China under Grant 62171187the Guangdong Basic and Applied Basic Research Foundation under Grant 2022A1515011476+1 种基金the Science and Technology Program of Guangzhou under Grant 201904010373the Key Program of Marine Economy Development (Six Marine Industries) Special Foundation of Department of Natural Resources of Guangdong Province (GDNRC [2020]009)。
文摘Wireless information and power transfer(WIPT) enables simultaneously communications and sustainable power supplement without the erection of power supply lines and the replacement operation of the batteries for the terminals. The application of WIPT to the underwater acoustic sensor networks(UWASNs) not only retains the long range communication capabilities, but also provides an auxiliary and convenient energy supplement way for the terminal sensors, and thus is a promising scheme to solve the energy-limited problem for the UWASNs. In this paper, we propose the integration of WIPT into the UWASNs and provide an overview on various enabling techniques for the WIPT based UWASNs(WIPT-UWASNs) as well as pointing out future research challenges and opportunities for WIPT-UWASNs.
文摘In this paper a new method to improve performance of cooperative underwater acoustic (UWA) sensor networks will be introduced. The method is based on controlling and optimizing carrier frequencies which are used in data links between network nods. In UWA channels Pathloss and noise power spectrum density (psd) are related to carrier frequency. Therefore, unlike radio communications, in UWA Communications signal to noise ratio (SNR) is related to frequency besides propagation link length. In such channels an optimum frequency in whole frequency band and link lengths cannot be found. In Cooperative transmission, transmitter sends one copy of transmitted data packets to relay node. Then relay depending on cooperation scheme, amplifies or decodes each data packet and retransmit it to destination. Receiver uses and combines both received signals to estimate transmitted data. This paper wants to propose a new method to decrease network power consumptions by controlling and sub-optimizing transmission frequency based on link length. For this purpose, underwater channel parameters is simulated and analyzed in 1km to 10km lengths (midrange channel). Then link lengths sub categorized and in each category, optimum frequency is computed. With these sub optimum frequencies, sensors and base station can adaptively control their carrier frequencies based on link length and decrease network’s power consumptions. Finally Different Cooperative transmission schemes “Decode and Forward (DF)” and “Amplify and Forward (AF)”, are simulated in UWA wireless Sensor network with and without the new method. In receiver maximum ratio combiner (MRC) is used to combining received signals and making data estimations. Simulations show that the new method, called AFC cooperative UWA communication, can improve performance of underwater acoustic wireless sensor networks up to 40.14%.
基金Supported by the National Natural Science Foundation of China （ No. 10974044）, the Fundamental Research Funds for the Central Universities of Hohai University （No. 2009B31514） and the 2009 Jiangsu Province Graduate Education Reform and Practical Project （No. 2009-22）.
文摘In this paper, an indoor environmental monitoring solution is proposed for the transformer sub- station system by using the ZigBee technology. It mainly analyzes the principle of sulfur hexafluoride sensor based on the acoustic method and puts forward a difference data processing method of single- channel and temperature compensation point at power consumption issues for sensor detection. The method not only reduces the sensor power consumption, but also ensures the accuracy and extends the lifetime of wireless sensor nodes effectively. This paper also analyzes the design of the base sta- tion mode, and demonstrates the running processes of routers and sensors. The feasibility of the pro- posed approach has been testified and proved.
文摘Wireless Sensor network (WSN) is an emerging technology and has great potential to be employed in critical situations. The development of wireless sensor networks was originally motivated by military applications like battlefield surveillance. However, Wireless Sensor Networks are also used in many areas such as Industrial, Civilian, Health, Habitat Monitoring, Environmental, Military, Home and Office application areas. Detection and tracking of targets (eg. animal, vehicle) as it moves through a sensor network has become an increasingly important application for sensor networks. The key advantage of WSN is that the network can be deployed on the fly and can operate unattended, without the need for any pre-existing infrastructure and with little maintenance. The system will estimate and track the target based on the spatial differences of the target signal strength detected by the sensors at different locations. Magnetic and acoustic sensors and the signals captured by these sensors are of present interest in the study. The system is made up of three components for detecting and tracking the moving objects. The first component consists of inexpensive off-the shelf wireless sensor devices, such as MicaZ motes, capable of measuring acoustic and magnetic signals generated by vehicles. The second component is responsible for the data aggregation. The third component of the system is responsible for data fusion algorithms. This paper inspects the sensors available in the market and its strengths and weakness and also some of the vehicle detection and tracking algorithms and their classification. This work focuses the overview of each algorithm for detection and tracking and compares them based on evaluation parameters.
文摘To design an energy-efficient Medium Access Control(MAC)protocol for the Underwater Wireless Sensor Networks(UWSNs)is an urgent research issue since depleted batteries cannot be recharged or replaced in the underwater environment.Moreover,the underwater acoustic channels are affected by hindrances such as long propagation delay and limited bandwidth,which appear in the design of the MAC protocol for the UWSNs.The available MAC protocols for the terrestrial wireless sensor networks exhibit low performance in energy efficiency,throughput and reliability in the UWSNs,and cannot be used in the UWSNs directly because of their unique characteristics.This paper proposes a synchronous duty-cycled reservation-based MAC protocol named Ordered Contention MAC(OCMAC)protocol.The basic mechanism of this protocol is to schedule data transmission by transmitters through the scheduling of Ready To Send(RTS)frames.The protocol eliminates the possible collision during data transmission and improves communication efficiency.The paper analyzes the performance in energy efficiency,throughput and reliability of the protocol by modeling the queuing behavior of OCMAC with a Markov Chain process.Furthermore,the analytical model is validated through a simulation study.The analysis results demonstrated that while providing good throughput and reliability,OCMAC can achieve energy saving.
文摘In order to achieve the acoustic signal distributed acquisition of stored grain pests, a novel acoustic signal acquisition system was presented based on the wireless sensor networks. And the system architecture, hardware configuration, and software were introduced in detail. Considering bandwidth limitation of wireless sensor networks, random sampling algorithm based on the compressed sensing theory was proposed. The developed acoustic signal acquisition system was applied in sampling the crawl acoustic signal of Tribolinm castaneum Herbst adults in granary. Preliminary experimentation indicated the rationality and practicability of the developed system and the proposed algorithm. They can implement the remote, real-time, and reliable wireless transmission for the acoustic signal sampled data of multiple points stored grain pests effectively.
文摘Wireless technology for underwater communication possesses a wide range of potential application, but it is still a relatively unexplored area in many aspects concerning modems physical design. A step towards future deployment of underwater networks is the reduction of power consumption. Therefore, asynchronous wakeup systems need to be integrated within the physical layer design while avoiding the use of additional transducers. This paper offers a practical and generic solution to adapt data reception and transmission together with asynchronous wakeup sub-systems in acoustic underwater modem architectures using a low power and low cost solution. The proposal has been implemented in a real prototype with success.
文摘WSNs （wireless sensor networks） can be used for railway infrastructure inspection and vehicle health monitoring. SHM （structural health monitoring） systems have a great potential to improve regular operation, security and maintenance routine of structures with estimating the state of its health and detecting the changes that affect its performance. This is vital for the development, upgrading, and expansion of railway networks. The work presented in this paper aims at the possible use of acoustic sensors coupled with ZigBee modules for health monitoring of rails. The detection principle is based on acoustic noise correlation techniques. Experiments have been performed in a rail sample to confirm the validity of acoustic noise correlation techniques in the rail. A wireless communication platform prototype based on the ZigBee/IEEE 802.15.4 technology has been implemented and deployed on a rail sample. Once the signals from the structure are collected, sensor data are transmitted through a ZigBee solution to the processing unit.
基金the General Program of National Natural Science Foundation of China(No.11364029,No.61461042)Key Projects of National Science and Technology Ministry of China(No.2014BAD08B05)“Prairie talent”Industrial Innovation Team project of Inner Mongolia(No.2014-27).
文摘A wireless acoustic sensor network was realized using wireless sensor nodes equipped with microphone condensers,in which its sensor nodes were configured to capture poultry sound data and transmit it via the network to a collection point.A high performance computer can process these large volumes of animal audio signals under different behaviors.By performing data signal processing and analyzing the audio signal,poultry sound can be achieved and then transformed into their corresponding behavioral modes for welfare assessment.In this study,compressive sensing algorithm was developed in consideration of the balance between the power saving from compression ratio and the computational cost,and a low power consumption as well as an inexpensive sensor node was designed as the elementary unit of poultry acoustic data collecting and transmission.Then,a Zigbee-based wireless acoustic sensor network was developed to meet the challenges of short transmission range and limited resources of storage and energy.Experimental results demonstrate that the compressive sensing algorithm can improve the communication performances of the wireless acoustic sensor network with high reliability,low packet loss rate and low energy consumption.
