SIMO detection schemes for underwater optical wireless communication under turbulence

In underwater optical wireless communication(UOWC),a channel is characterized by abundant scattering/absorption effects and optical turbulence.Most previous studies on UOWC have been limited to scattering/absorption effects.However,experiments in the literature indicate that underwater optical turbulence(UOT)can cause severe degradation of UOWC performance.In this paper,we characterize an UOWC channel with both scattering/absorption and UOT taken into consideration,and a spatial diversity receiver scheme,say a singleinput–multiple-output(SIMO) scheme,based on a light-emitting-diode(LED) source and multiple detectors is proposed to mitigate deep fading.The Monte Carlo based statistical simulation method is introduced to evaluate the bit-error-rate performance of the system.It is shown that spatial diversity can effectively reduce channel fading and remarkably extend communication range.

Sensorless Sensing with WiFi

Can WiFi signals be used for sensing purpose？ The growing PHY layer capabilities of WiFi has made it possible to reuse WiFi signals for both communication and sensing. Sensing via WiFi would enable remote sensing without wearable sensors, simultaneous perception and data transmission without extra communication infrastructure, and contactless sensing in privacy-preserving mode. Due to the popularity of WiFi devices and the ubiquitous deployment of WiFi networks, WiFi-based sensing networks, if fully connected, would potentially rank as one of the world＇s largest wireless sensor networks. Yet the concept of wireless and sensorless sensing is not the simple combination of WiFi and radar. It seeks breakthroughs from dedicated radar systems, and aims to balance between low cost and high accuracy, to meet the rising demand for pervasive environment perception in everyday life. Despite increasing research interest, wireless sensing is still in its infancy. Through introductions on basic principles and working prototypes, we review the feasibilities and limitations of wireless, sensorless, and contactless sensing via WiFi. We envision this article as a brief primer on wireless sensing for interested readers to explore this open and largely unexplored field and create next-generation wireless and mobile computing applications.

Research on the Key Technology of LTCC Pressure Sensor

This article introduces the fabrication technology processes of the capacitive pressure sensor based on the low temperature co-fired ceramic （LTCC） material. Filling the cavity with different materials as a sacrificial layer is mainly discussed, and two different materials are chosen in the fabrication. It is found that the cavity filled with polyimide expands largely during sintering, while carbon ESL49000 material filled is more preferable to keep the cavity flat. Finally, the structure leaving without an air evacuation channel is designed and tested in a built-up pressure environment, the frequency measured decreases approximately linearly with the pressure applied, which proves the design leaving no air evacuation channel advisable.