As a representative of chain-based protocol in Wireless Sensor Networks (WSNs), EEPB is an elegant solution on energy efficiency. However, in the latter part of the operation of the network, there is still a big probl...As a representative of chain-based protocol in Wireless Sensor Networks (WSNs), EEPB is an elegant solution on energy efficiency. However, in the latter part of the operation of the network, there is still a big problem: reserving energy of the node frequently presents the incapacity of directly communicating with the base station, at the same time capacity of data acquisition and transmission as normal nodes. If these nodes were selected as LEADER nodes, that will accelerate the death process and unevenness of energy consumption distribution among nodes.This paper proposed a chain routing algorithm based ontraffic prediction model (CRTP).The novel algorithmdesigns a threshold judgment method through introducing the traffic prediction model in the process of election of LEADER node. The process can be dynamically adjusted according to the flow forecasting. Therefore, this algorithm lets the energy consumption tend-ing to keep at same level. Simulation results show that CRTP has superior performance over EEPB in terms of balanced network energy consumption and the prolonged network life.展开更多
Sensor networks tend to support different traffic patterns since more and more emerging applications have diverse needs. We present MGRP, a Multi-Gradient Routing Protocol for wireless sensor networks, which is fully ...Sensor networks tend to support different traffic patterns since more and more emerging applications have diverse needs. We present MGRP, a Multi-Gradient Routing Protocol for wireless sensor networks, which is fully distributed and efficiently supports endto-end, one-to-many and many-to-one traffic patterns by effectively construct and maintain a gradient vector for each node. We further combine neighbor link estimation with routing information to reduce packet exchange on network dynamics and node failures. We have implemented MGRP on Tiny OS and evaluated its performance on real-world testbeds. The result shows MGRP achieves lower end-to-end packet delay in different traffic patterns compared to the state of the art routing protocols while still remains high packet delivery ratio.展开更多
Wireless sensor networks have been identified as one of the key technologies for the 21st century. In order to overcome their limitations such as fault tolerance and conservation of energy, we propose a middleware sol...Wireless sensor networks have been identified as one of the key technologies for the 21st century. In order to overcome their limitations such as fault tolerance and conservation of energy, we propose a middleware solution, In-Motes. In-Motes stands as a fault tolerant platform for deploying and monitoring applications in real time offers a number of possibilities for the end user giving him in parallel the freedom to experiment with various parameters, in an effort the deployed applications to run in an energy efficient manner inside the network. The proposed scheme is evaluated through the In-Motes EYE application, aiming to test its merits under real time conditions. In-Motes EYE application which is an agent based real time In-Motes application developed for sensing acceleration variations in an environment. The application was tested in a prototype area, road alike, for a period of four months.展开更多
This paper presents an add-on Class of Service (CoS) layer for wireless mesh networks. The proposed protocol is applicable for contention-based MACs and is therefore compatible with most of the Wireless Local Area Net...This paper presents an add-on Class of Service (CoS) layer for wireless mesh networks. The proposed protocol is applicable for contention-based MACs and is therefore compatible with most of the Wireless Local Area Network (WLAN) and Wireless Sensor Network (WSN) protocols. The protocol has a locally centralized control for managing data flows, which either reserve a fixed bandwidth or are weighted by fair scheduling. The protocol reduces transmission collisions, thus improving the overall throughput. IEEE 802.11 adhoc WLAN has been taken as a platform for simulations and prototyping for evaluating the protocol performance. Network Simulator Version 2 (NS2) simulations show that the CoS protocol efficiently differentiates bandwidth, supports bandwidth reservations, and reaches less than 10 ms transfer delay on IEEE 802.11b WLAN. Testing with a full prototype implementation verified the performance of the protocol.展开更多
The present paper aims to describe the conceptual idea to use cars as sensors to measure and acquire data related road environment. The parameters are collected using only standard equipment commonly installed and ope...The present paper aims to describe the conceptual idea to use cars as sensors to measure and acquire data related road environment. The parameters are collected using only standard equipment commonly installed and operative on commercial cars. Real sensors and car sub-systems (e.g. thermometers, accelerometers, ABS, ESP, and GPS) together with other “implicit” sensors (e.g. fog lights, windscreen wipers) acquire and contain information. They are shared inside an in-vehicle communication network using mainly the standard CAN bus and can be collected by a simple central node. This node can also be available on the market without too expensive costs thanks to some companies which business is devoted to car fleet monitoring. All the collected data are then geolocalized using a standard GPS receiver and sent to a remote elaboration unit, exploiting mobile network technologies such as GPRS or UMTS. A large number of cars, connected together in a diffuse Wireless Sensor Network, allow the elaboration unit to realize some info-layers put at the disposal of a car driver. Traffic, state of the road and other information about the weather can be received by car drivers using an ad hoc developed mobile application for smartphone which can give punctual information related to a specific route, previously set on the mobile phone navigator. The description of some experimental activities is presented, some technical points will be addressed and some examples of applications of the network of cars “as sensors” will be given.展开更多
In wireless sensor networks (WSNs), it is essential to save energy consumption at sensor nodes (SNs). A clustering technique is one of the approaches to save energy consumption, where several neighboring SNs form a cl...In wireless sensor networks (WSNs), it is essential to save energy consumption at sensor nodes (SNs). A clustering technique is one of the approaches to save energy consumption, where several neighboring SNs form a cluster and transmit the sensed data to their cluster head (CH), and then the CH sends the aggregated data to a sink node. Under spatial non-uniform traffic environments, the clustering technique causes the non-uniformity in data gathering performance and energy consumption between clusters in WSNs. In this paper, we propose a clustering scheme for the WSNs employing IEEE802.15.4 beacon enabled mode under various non-uniform traffic environments. The proposed scheme distributes network traffic uniformly to the clusters through cluster area control by adjusting beacon transmission power, and thereby achieves uniform and improved data gathering performance. In the clusters with expanded area, however, the performance degradation arises from long distance communications. To solve this problem, the proposed scheme controls transmission power at SNs. In addition, to reduce energy consumption the proposed scheme sets the appropriate active period length in duty cycle operation to the current traffic condition. The performance evaluations by computer simulation show the effectiveness of the proposed scheme for the WSNs under various non-uniform traffic environments.展开更多
In wireless sensor networks, sensor nodes are usually battery-operated computing and sensing devices, hence operations are limited by the initially equipped batteries, which are hard to be recharged or replaced. ：In ...In wireless sensor networks, sensor nodes are usually battery-operated computing and sensing devices, hence operations are limited by the initially equipped batteries, which are hard to be recharged or replaced. ：In this sense, saving energy consumption becomes significant. As most energy waste is from the always-on wireless interface, S-MAC is suggested to reduce energy consumption by introducing periodic listen/sleep scheme. However, when designing the listening time, S-MAC fails to consider the traffic distribution factor. In this article, an optimization for this scheme is proposed based on the distribution model. Evaluations show that the optimized S-MAC achieves considerable improvement in energy and latency.展开更多
文摘As a representative of chain-based protocol in Wireless Sensor Networks (WSNs), EEPB is an elegant solution on energy efficiency. However, in the latter part of the operation of the network, there is still a big problem: reserving energy of the node frequently presents the incapacity of directly communicating with the base station, at the same time capacity of data acquisition and transmission as normal nodes. If these nodes were selected as LEADER nodes, that will accelerate the death process and unevenness of energy consumption distribution among nodes.This paper proposed a chain routing algorithm based ontraffic prediction model (CRTP).The novel algorithmdesigns a threshold judgment method through introducing the traffic prediction model in the process of election of LEADER node. The process can be dynamically adjusted according to the flow forecasting. Therefore, this algorithm lets the energy consumption tend-ing to keep at same level. Simulation results show that CRTP has superior performance over EEPB in terms of balanced network energy consumption and the prolonged network life.
基金supported by National Key Technologies Research and Development Program of China under Grant No.2014BAH14F01National Science and Technology Major Project of China under Grant No.2012ZX03005007+1 种基金National NSF of China Grant No.61402372Fundamental Research Funds for the Central Universities Grant No.3102014JSJ0003
文摘Sensor networks tend to support different traffic patterns since more and more emerging applications have diverse needs. We present MGRP, a Multi-Gradient Routing Protocol for wireless sensor networks, which is fully distributed and efficiently supports endto-end, one-to-many and many-to-one traffic patterns by effectively construct and maintain a gradient vector for each node. We further combine neighbor link estimation with routing information to reduce packet exchange on network dynamics and node failures. We have implemented MGRP on Tiny OS and evaluated its performance on real-world testbeds. The result shows MGRP achieves lower end-to-end packet delay in different traffic patterns compared to the state of the art routing protocols while still remains high packet delivery ratio.
文摘Wireless sensor networks have been identified as one of the key technologies for the 21st century. In order to overcome their limitations such as fault tolerance and conservation of energy, we propose a middleware solution, In-Motes. In-Motes stands as a fault tolerant platform for deploying and monitoring applications in real time offers a number of possibilities for the end user giving him in parallel the freedom to experiment with various parameters, in an effort the deployed applications to run in an energy efficient manner inside the network. The proposed scheme is evaluated through the In-Motes EYE application, aiming to test its merits under real time conditions. In-Motes EYE application which is an agent based real time In-Motes application developed for sensing acceleration variations in an environment. The application was tested in a prototype area, road alike, for a period of four months.
文摘This paper presents an add-on Class of Service (CoS) layer for wireless mesh networks. The proposed protocol is applicable for contention-based MACs and is therefore compatible with most of the Wireless Local Area Network (WLAN) and Wireless Sensor Network (WSN) protocols. The protocol has a locally centralized control for managing data flows, which either reserve a fixed bandwidth or are weighted by fair scheduling. The protocol reduces transmission collisions, thus improving the overall throughput. IEEE 802.11 adhoc WLAN has been taken as a platform for simulations and prototyping for evaluating the protocol performance. Network Simulator Version 2 (NS2) simulations show that the CoS protocol efficiently differentiates bandwidth, supports bandwidth reservations, and reaches less than 10 ms transfer delay on IEEE 802.11b WLAN. Testing with a full prototype implementation verified the performance of the protocol.
文摘The present paper aims to describe the conceptual idea to use cars as sensors to measure and acquire data related road environment. The parameters are collected using only standard equipment commonly installed and operative on commercial cars. Real sensors and car sub-systems (e.g. thermometers, accelerometers, ABS, ESP, and GPS) together with other “implicit” sensors (e.g. fog lights, windscreen wipers) acquire and contain information. They are shared inside an in-vehicle communication network using mainly the standard CAN bus and can be collected by a simple central node. This node can also be available on the market without too expensive costs thanks to some companies which business is devoted to car fleet monitoring. All the collected data are then geolocalized using a standard GPS receiver and sent to a remote elaboration unit, exploiting mobile network technologies such as GPRS or UMTS. A large number of cars, connected together in a diffuse Wireless Sensor Network, allow the elaboration unit to realize some info-layers put at the disposal of a car driver. Traffic, state of the road and other information about the weather can be received by car drivers using an ad hoc developed mobile application for smartphone which can give punctual information related to a specific route, previously set on the mobile phone navigator. The description of some experimental activities is presented, some technical points will be addressed and some examples of applications of the network of cars “as sensors” will be given.
文摘In wireless sensor networks (WSNs), it is essential to save energy consumption at sensor nodes (SNs). A clustering technique is one of the approaches to save energy consumption, where several neighboring SNs form a cluster and transmit the sensed data to their cluster head (CH), and then the CH sends the aggregated data to a sink node. Under spatial non-uniform traffic environments, the clustering technique causes the non-uniformity in data gathering performance and energy consumption between clusters in WSNs. In this paper, we propose a clustering scheme for the WSNs employing IEEE802.15.4 beacon enabled mode under various non-uniform traffic environments. The proposed scheme distributes network traffic uniformly to the clusters through cluster area control by adjusting beacon transmission power, and thereby achieves uniform and improved data gathering performance. In the clusters with expanded area, however, the performance degradation arises from long distance communications. To solve this problem, the proposed scheme controls transmission power at SNs. In addition, to reduce energy consumption the proposed scheme sets the appropriate active period length in duty cycle operation to the current traffic condition. The performance evaluations by computer simulation show the effectiveness of the proposed scheme for the WSNs under various non-uniform traffic environments.
基金supported by the National Natural Science Foundation of China (60677003)the Building Project of Beijing Municipal Education Commission (XK100130637)
文摘In wireless sensor networks, sensor nodes are usually battery-operated computing and sensing devices, hence operations are limited by the initially equipped batteries, which are hard to be recharged or replaced. ：In this sense, saving energy consumption becomes significant. As most energy waste is from the always-on wireless interface, S-MAC is suggested to reduce energy consumption by introducing periodic listen/sleep scheme. However, when designing the listening time, S-MAC fails to consider the traffic distribution factor. In this article, an optimization for this scheme is proposed based on the distribution model. Evaluations show that the optimized S-MAC achieves considerable improvement in energy and latency.
