Robust interface and excellent as-built mechanical properties of Ti–6Al–4V fabricated through laser-aided additive manufacturing with powder and wire

The feasibility of manufacturing Ti-6Al-4V samples through a combination of laser-aided additive manufacturing with powder(LAAM_(p))and wire(LAAM_(w))was explored.A process study was first conducted to successfully circumvent defects in Ti-6Al-4V deposits for LAAM_(p) and LAAM_(w),respectively.With the optimized process parameters,robust interfaces were achieved between powder/wire deposits and the forged substrate,as well as between powder and wire deposits.Microstructure characterization results revealed the epitaxial prior β grains in the deposited Ti-6Al-4V,wherein the powder deposit was dominated by a finerα′microstructure and the wire deposit was characterized by lamellar α phases.The mechanisms of microstructure formation and correlation with mechanical behavior were analyzed and discussed.The mechanical properties of the interfacial samples can meet the requirements of the relevant Aerospace Material Specifications(AMS 6932)even without post heat treatment.No fracture occurred within the interfacial area,further suggesting the robust interface.The findings of this study highlighted the feasibility of combining LAAM_(p) and LAAM_(w) in the direct manufacturing of Ti-6Al-4V parts in accordance with the required dimensional resolution and deposition rate,together with sound strength and ductility balance in the as-built condition.

Experimental Study and a Modified Model for Temperature-Recovery Stress of Shape Memory Alloy Wire under Different Temperatures

To investigate the performance of utilizing the shape memory effect of SMA(Shape Memory Alloy)wire to generate recovery stress,this paper performed single heating recovery stress tests and reciprocating heating-cooling recovery stress tests on SMA wire under varying initial strain conditions.The effects of various strains and different energized heating methods on the recovery stress of SMA wires were explored in the single heating tests.The SMA wire was strained from 2%to 8%initially,and two distinct heating approaches were employed:one using a large current interval for rapid heating and one using a small current interval for slower heating.The experimental outcomes reveal that during a single heating cycle,the temperature-recovery stress relationship of SMA wire exhibits three distinct stages:the martensite phase stage,the transition stage from martensite to austenite phase,and the austenite phase stage.Notably,the choice of heating method does not influence the maximum recovery stress value,and the correlation between initial strain and maximum recovery stress is predominantly linear.Moreover,conducting the reciprocating temperature rise and fall performance test is important to better simulate the scenario in practical engineering where multiple recovery stress in SMA wires for structural repair.In this test,two temperature cycling methods were studied:interval rise and fall,as well as direct rise and fall.In the case of utilizing the interval temperature rise and fall method,it was observed that the recovery stress associated with cooling was significantly higher than that corresponding to heating at the same temperature.Furthermore,the recovery stress was lower upon subsequent heating than that measured during the previous heating cycle.Based on the experimental results,a prediction model for the temperature-recovery stress relationship has been proposed to simplify numerical calculations.It is hoped that an approximate temperaturerecovery stress curve can be obtained from the parameters of the SMA wire.The calculated values derived from this model show good alignment with the measured values,indicating its reliability.

A Dynamic Prediction Approach for Wire Icing Thickness under Extreme Weather Conditions Based on WGAN-GP-RTabNet

Ice cover on transmission lines is a significant issue that affects the safe operation of the power system.Accurate calculation of the thickness of wire icing can effectively prevent economic losses caused by ice disasters and reduce the impact of power outages on residents.However,under extreme weather conditions,strong instantaneous wind can cause tension sensors to fail,resulting in significant errors in the calculation of icing thickness in traditional mechanics-based models.In this paper,we propose a dynamic prediction model of wire icing thickness that can adapt to extreme weather environments.The model expands scarce raw data by the Wasserstein Generative Adversarial Network with Gradient Penalty(WGAN-GP)technique,records historical environmental information by a recurrent neural network,and evaluates the ice warning levels by a classifier.At each time point,the model diagnoses whether the current sensor failure is due to icing or strong winds.If it is determined that the wire is covered with ice,the icing thickness will be calculated after the wind-induced tension is removed from the ice-wind coupling tension.Our new model was evaluated using data from the power grid in an area with extreme weather.The results show that the proposed model has significant improvements in accuracy compared with traditional models.

Topological states constructed by two different trivial quantum wires

The topological states of the two-leg and three-leg ladders formed by two trivial quantum wires with different lattice constants are theoretically investigated. Firstly, we take two trivial quantum wires with a lattice constant ratio of 1:2 as an example. For the symmetric nearest-neighbor intra-chain hopping two-leg ladder, the inversion symmetry protected topological insulator phase with two degenerate topological edge states appears. When the inversion symmetry is broken, the topological insulators with one or two topological edge states of different energies and topological metals with edge states embedded in the bulk states could emerge depending on the filling factor. The topological origin of these topological states in the two-leg ladders is the topological properties of the Chern insulators and Chern metals. According to the arrangement of two trivial quantum wires, we construct two types of three-leg ladders. Each type of the three-leg ladder could be divided into one trivial subspace and one topological nontrivial subspace by unitary transformation. The topological nontrivial subspace corresponds to the effective two-leg ladder model. As the filling factor changes, the system could be in topological insulators or topological metals phases. When the two-leg ladder is constructed by two trivial quantum wires with a lattice constant ratio of 1:3 and 2:3, the system could also realize rich topological states such as the topological insulators and topological metals with the topological edge states. These rich topological states in the two-leg and three-leg ladders could be confirmed by current experimental techniques.

Improved super-elastic Ti-Ni alloy wire for the angle class III patient with anterior open bite:A case report

BACKGROUND Orthodontic treatment for open bite and crossbite cases is always challenging.In this paper,we demonstrate a skeletal class III patient with anterior open bite and crossbite whose problem was successfully corrected with improved super-elastic Ti-Ni alloy wire(ISW).CASE SUMMARY A 19 years old male came to our clinic with a chief complaint of anterior open bite and crossbite and not able to chew food well.Clinical examination revealed an angle class III malocclusion with anterior open bite,crossbite and spaced arch.Ra-diographic and clinical examination showed a skeletal class III pattern.We used ISW to level the upper and lower arch and to correct the anterior open bite and crossbite.Intermaxillary elastics were also used to achieve a better interdigitation.Finally,adequate overbite,overjet and a desirable occlusion were achieved.The active treatment time took 2 years and 2 months.CONCLUSION In a case of class III angular malocclusion with open bite and crossbite in the ante-rior teeth,ideal results were achieved using the ISW technique and the patient was satisfied with the outcome.

电磁导航支气管镜引导下肺结节定位和CT引导下Hook-wire穿刺定位在肺癌根治术中的应用效果及安全性比较

目的对比电磁导航支气管镜(ENB)引导下肺结节定位和CT引导下Hook-wire穿刺定位在肺癌根治术中的应用效果和安全性。方法将87例行肺癌根治术患者根据定位方式的不同分为CT组(n=45,行CT引导下Hook-wire穿刺定位)和ENB组(n=42,行ENB引导下肺结节定位)。比较两组患者手术情况、切缘阳性率、心肺功能指标、应激指标和并发症发生情况。结果ENB组患者定位时间、定位后等待时间均短于CT组,差异均有统计学意义(P﹤0.05)。术后7天,两组患者左心室射血分数(LVEF)、每搏量(SV)、用力肺活量(FVC)均较术前降低,但ENB组患者LVEF、SV、FVC均高于CT组,差异均有统计学意义(P﹤0.05)。术后1天,两组患者白细胞介素-6(IL-6)、白细胞介素-8(IL-8)、C反应蛋白(CRP)、皮质醇(Cor)水平均较术前升高,但ENB组患者IL-6、IL-8、CRP、Cor水平均低于CT组,差异均有统计学意义(P﹤0.05)。两组患者并发症总发生率比较,差异无统计学意义(P﹥0.05)。结论相比于CT引导下Hook-wire穿刺定位,ENB引导下肺结节定位的定位时间和定位后等待时间更短,能够更加有效地改善患者的心肺功能,减轻应激反应。

CT引导下Hook-wire定位辅助胸腔镜手术对早期肺癌患者的疗效分析

目的探讨CT引导下Hook-wire定位辅助胸腔镜手术对早期肺癌患者的疗效。方法选取92例早期肺癌患者,按随机数字表法分为两组,各46例。对照组行常规胸腔镜手术治疗,观察组行CT引导下Hook-wire定位辅助胸腔镜手术治疗。比较两组手术情况、创伤应激指标、肿瘤标志物水平及并发症。结果观察组手术时间、术后引流时间及住院时间为(138.52±10.52)min、(3.12±0.45)d、(10.35±1.25)d,短于对照组,术中出血量为(105.41±12.36)ml,少于对照组,差异有统计学意义(P<0.05);观察组术后皮质醇(Cor)、去甲肾上腺素(NE)、C反应蛋白(CRP)水平分别为(118.52±8.36)ng/ml、(185.93±14.52)ng/L、(32.41±4.25)mg/L,低于对照组,差异有统计学意义(P<0.05);观察组术后癌胚抗原(CEA)、细胞角蛋白19片段抗原21-1(CYFRA21-1)、糖类抗原125(CA125)水平为(8.96±1.15)ng/ml、(3.88±0.42)ng/ml、(12.63±1.54)U/ml,低于对照组,并发症少于对照组,差异有统计学意义(P<0.05)。结论CT引导下Hook-wire定位辅助胸腔镜手术治疗早期肺癌效果更佳,可减轻手术创伤,降低创伤应激反应,加快肿瘤标志物复常,减少并发症发生。

3D reconstruction and defect pattern recognition of bonding wire based on stereo vision

Non-destructive detection of wire bonding defects in integrated circuits(IC)is critical for ensuring product quality after packaging.Image-processing-based methods do not provide a detailed evaluation of the three-dimensional defects of the bonding wire.Therefore,a method of 3D reconstruction and pattern recognition of wire defects based on stereo vision,which can achieve non-destructive detection of bonding wire defects is proposed.The contour features of bonding wires and other electronic components in the depth image is analysed to complete the 3D reconstruction of the bonding wires.Especially to filter the noisy point cloud and obtain an accurate point cloud of the bonding wire surface,a point cloud segmentation method based on spatial surface feature detection(SFD)was proposed.SFD can extract more distinct features from the bonding wire surface during the point cloud segmentation process.Furthermore,in the defect detection process,a directional discretisation descriptor with multiple local normal vectors is designed for defect pattern recognition of bonding wires.The descriptor combines local and global features of wire and can describe the spatial variation trends and structural features of wires.The experimental results show that the method can complete the 3D reconstruction and defect pattern recognition of bonding wires,and the average accuracy of defect recognition is 96.47%,which meets the production requirements of bonding wire defect detection.

Expert Experience and Data-Driven Based Hybrid Fault Diagnosis for High-SpeedWire Rod Finishing Mills

The reliable operation of high-speed wire rod finishing mills is crucial in the steel production enterprise.As complex system-level equipment,it is difficult for high-speed wire rod finishing mills to realize fault location and real-time monitoring.To solve the above problems,an expert experience and data-driven-based hybrid fault diagnosis method for high-speed wire rod finishing mills is proposed in this paper.First,based on its mechanical structure,time and frequency domain analysis are improved in fault feature extraction.The approach of combining virtual value,peak value with kurtosis value index,is adopted in time domain analysis.Speed adjustment and side frequency analysis are proposed in frequency domain analysis to obtain accurate component characteristic frequency and its corresponding sideband.Then,according to time and frequency domain characteristics,fault location based on expert experience is proposed to get an accurate fault result.Finally,the proposed method is implemented in the equipment intelligent diagnosis system.By taking an equipment fault on site,for example,the effectiveness of the proposed method is illustrated in the system.

High formability Mg-Zn-Gd wire facilitates ACL reconstruction via its swift degradation to accelerate intra-tunnel endochondral ossification

After reconstructing the anterior cruciate ligament(ACL),unsatisfactory bone tendon interface healing may often induce tunnel enlargement at the early healing stage.With good biological features and high formability,Magnesium-Zinc-Gadolinium(ZG21)wires are developed to bunch the tendon graft for matching the bone tunnel during transplantation.Microstructure,tensile strength,degradation,and cytotoxicity of ZG21 wire are evaluated.The rabbit model is used for assessing the biological effects of ZG21 wire by Micro-CT,histology,and mechanical test.The SEM/EDS,immunochemistry,and in vitro assessments are performed to investigate the underlying mechanism.Material tests demonstrate the high formability of ZG21 wire as surgical suture.Micro-CT shows ZG21 wire degradation accelerates tunnel bone formation,and histologically with earlier and more fibrocartilage regeneration at the healing interface.The mechanical test shows higher ultimate load in the ZG21 group.The SEM/EDS presents ZG21 wire degradation triggered calcium phosphate(Ca-P)deposition.IHC results demonstrate upregulation of Wnt3a,BMP2,and VEGF at the early phase and TGFβ3 and Type II collagen at the late phase of healing.In vitro tests also confirmed the Ca-P in the metal extract could elevate the expression of Wnt3a,βcatenin,ocn and opn to stimulate osteogenesis.Ex vivo tests of clinical samples indicated suturing with ZG21 wire did not weaken the ultimate loading of human tendon tissue.In conclusion,the ZG21 wire is feasible for tendon graft bunching.Its degradation products accelerated intra-tunnel endochondral ossification at the early healing stage and therefore enhanced bone-tendon interface healing in ACL reconstruction.

Effect of wire diameter compression ratio on drawing deformation of micro copper wire

A crystal plasticity finite element model was developed for the drawing deformation of pure copper micro wire,based on rate-dependent crystal plasticity theory.The impact of wire diameter compression ratio on the micro-mechanical deformation behavior during the wire drawing process was investigated.Results indicate that the internal deformation and slip of the drawn wire are unevenly distributed,forming distinct slip and non-slip zones.Additionally,horizontal strain concentration bands develop within the drawn wire.As the wire diameter compression ratio increases,the strength of the slip systems and the extent of slip zones inside the deformation zone also increase.However,the fluctuating stress state,induced by contact pressure and frictional stress,results in a rough and uneven wire surface and diminishes the stability of the drawing process.

Preparation,microstructure and degradation behavior of Mg−2Zn−0.4Sc−0.2Zr alloy wire

A biodegradable Mg−2Zn−0.4Sc−0.2Zr(ZK20−0.4Sc)alloy wire with a diameter of 0.5 mm was prepared by a combination of hot extrusion and cold-drawing.The average grain size of ZK20−0.4Sc alloy wire on the longitudinal section along the drawing direction is approximately 7.3μm.The texture results show relatively strong<1020>and weak<1010>fiber texture components parallel to the drawing direction.The ZK20−0.4Sc alloy wire exhibits better mechanical properties with the tensile strength,yield strength and elongate of(329±2)MPa,(287±2)MPa and(14.2±0.5)%,respectively.The better mechanical properties are mainly attributed to the grain refinement strengthening,dislocation strengthening and precipitation strengthening.With the immersion time increasing to 14 d,the corrosion type transfers from filament corrosion and pitting corrosion to severe localized corrosion.

Capillary Property of Entangled Porous Metallic Wire materials and Its Application in Fluid Buffers:Theoretical Analysis and Experimental Study

Strong impact does serious harm to the military industries so it is necessary to choose reasonable cushioning material and design effective buffers to prevent the impact of equipment.Based on the capillary property entangled porous metallic wire materials(EPMWM),this paper designed a composite buffer which uses EPMWM and viscous fluid as cushioning materials under the low-speed impact of the recoil force device of weapon equipment(such as artillery,mortar,etc.).Combined with the capillary model,porosity,hydraulic diameter,maximum pore diameter and pore distribution were used to characterize the pore structure characteristics of EPMWM.The calculation model of the damping force of the composite buffer was established.The low-speed impact test of the composite buffer was conducted.The parameters of the buffer under low-speed impact were identified according to the model,and the nonlinear model of damping force was obtained.The test results show that the composite buffer with EPMWM and viscous fluid can absorb the impact energy from the recoil movement effectively,and provide a new method for the buffer design of weapon equipment(such as artillery,mortar,etc.).

Customized heat treatment process enabled excellent mechanical properties in wire arc additively manufactured Mg-RE-Zn-Zr alloys

Customized heat treatment is essential for enhancing the mechanical properties of additively manufactured metallic materials,especially for alloys with complex phase constituents and heterogenous microstructure.However,the interrelated evolutions of different microstructure features make it difficult to establish optimal heat treatment processes.Herein,we proposed a method for customized heat treatment process exploration and establishment to overcome this challenge for such kind of alloys,and a wire arc additively manufactured(WAAM)Mg-Gd-Y-Zn-Zr alloy with layered heterostructure was used for feasibility verification.Through this method,the optimal microstructures(fine grain,controllable amount of long period stacking ordered(LPSO)structure and nano-scaleβ'precipitates)and the corresponding customized heat treatment processes(520°C/30 min+200°C/48 h)were obtained to achieve a good combination of a high strength of 364 MPa and a considerable elongation of 6.2%,which surpassed those of other state-of-the-art WAAM-processed Mg alloys.Furthermore,we evidenced that the favorable effect of the undeformed LPSO structures on the mechanical properties was emphasized only when the nano-scaleβ'precipitates were present.It is believed that the findings promote the application of magnesium alloy workpieces and help to establish customized heat treatment processes for additively manufactured materials.

Mechanical property of cylindrical sandwich shell with gradient core of entangled wire mesh

To explore the wide-frequency damping and vibration-attenuation performances in the application of aerospace components,the cylindrical sandwich shell structure with a gradient core of entangled wire mesh was proposed in this paper.Firstly,the gradient cores of entangled wire mesh in the axial and radial directions were prepared by using an in-house Numerical Control weaving machine,and the metallurgical connection between skin sheets and the gradient core was performed using vacuum brazing.Secondly,to investigate the mechanical properties of cylindrical sandwich shells with axial or radial gradient cores,quasi-static and dynamic mechanical experiments were carried out.The primary evaluations of mechanical properties include secant stiffness,natural frequency,Specific Energy Absorption(SEA),vibration acceleration level,and so on.The results suggest that the vibration-attenuation performance of the sandwich shell is remarkable when the high-density core layer is at the end of the shell or abuts the inner skin.The axial gradient material has almost no influence on the vibration frequencies of the shell,whereas the vibration frequencies increase dramatically when the high-density core layer approaches the skin.Moreover,compared to the conventional sandwich shells,the proposed functional grading cylindrical sandwich shell exhibits more potential in mass reduction,stiffness designing,and energy dissipation.

Selection of Fe as a barrier for manufacturing low-cost MgB2 multifilament wires-Advanced microscopy study between Fe and B reaction

The high cost of using the niobium(Nb)barrier for manufacturing magnesium diboride(MgB2)mono-and multi-filamentary wires for large-scale applications has become one of the barriers to replacing current commercial niobium-titanium superconductors.The potential of replacing the Nb barrier with a low-cost iron(Fe)barrier for multifilament MgB2 superconducting wires is investigated in this manuscript.Therefore,MgB2 wires with Fe barrier sintered with different temperatures are studied(from 650°C to 900°C for 1 h)to investigate the non-superconducting reaction phase of Fe-B.Their superconducting performance including engineering critical current density(Je)and n-value are tested at 4.2 K in various external magnetic fields.The best sample sintered at 650°C for 1 h has achieved a Je value of 3.64×10^(4) A cm^(−2) and an n-value of 61 in 2 T magnetic field due to the reduced formation of Fe2B,better grain connectivity and homogenous microstructure.For microstructural analysis,the focused ion beam(FIB)is utilised for the first time to acquire three-dimensional microstructures and elemental mappings of the interface between the Fe barrier and MgB2 core of different wires.The results have shown that if the sintering temperature can be controlled properly,the Je and n-value of the wire are still acceptable for magnet applications.The formation of Fe2B is identified along the edge of MgB2,as the temperature increases,the content of Fe2B also increases which causes the degradation in the performance of wires.

Modeling asymmetric fracture mechanics of Mg alloy wire in drawing process

In this study,a numerical analysis was conducted on the ductile fracture of a 2-mm diameter Mg-1Zn-0.5Mn-0.5Sr-0.1Ca alloy wire during drawing.The hexagonally close-packed crystal structure of Mg alloys causes asymmetric fracture behavior,especially in the compression region.The aim of this study is to develop a comprehensive damage model for Mg alloy wire that accurately predicts ductile fracture,with a focus on the compression region.A novel experimental method was introduced to measure the ductile fracture of Mg alloy wires under different stress states.The wire drawing process was simulated using the Generalized Incremental Stress-State dependent damage(GISSMO)Model and the Semi-Analytical Model for Polymers(SAMP)model.The damage model's prediction and the experimental results were found to be in excellent agreement,especially in determining crack initiation.Computational analysis established a safe zone diagram for die angle and reduction ratio,and experimental validation confirmed the feasibility of this approach.The proposed damage model can provide a practical and reliable analysis for optimizing the drawing process of Mg alloy wire.

In vivo and in vitro study of resorbable magnesium wires for medical implants:Mg purity,surface quality,Zn alloying and polymer coating

Magnesium is an excellent material in terms of biocompatibility and its corrosion products can serve as an active source for new bone formation.However,localized corrosion and H_(2)generation limit the potential of Mg-based implants.Utilizing low-alloyed Mg-Zn wires can strongly reduce problems with large H_(2)bubbles and improve the mechanical properties considerably while maintaining excellent long-term biocompatibility.Acidic pickling and a polymer coating can be effectively used to lower the rate of in vivo degradation.In this work,microstructural,mechanical,and in vitro characterization of 250μm and 300μm extruded wires made from ultra-pure Mg,commercially pure Mg,Mg-0.15Zn,Mg-0.4Zn and Mg-1Zn was performed.Additionally,Mg-0.4Zn wires together with a variant coated with a copolymer of L-lactide andε-caprolactone were tested in vivo on artificially damaged Wistar rat femurs.Based on the observed Mg-induced osteogenesis,polymer-coated Mg wires with a small addition of Zn are a perspective material for bone-support applications,such as cerclage and fixation wires.

Mass transfer enhancement and hydrodynamic performance with wire mesh coupling solid particles in bubble column reactor

It is of vital significance to investigate mass transfer enhancements for chemical engineering processes.This work focuses on investigating the coupling influence of embedding wire mesh and adding solid particles on bubble motion and gas-liquid mass transfer process in a bubble column.Particle image velocimetry(PIV)technology was employed to analyze the flow field and bubble motion behavior,and dynamic oxygen absorption technology was used to measure the gas-liquid volumetric mass transfer coefficient(kLa).The effect of embedding wire mesh,adding solid particles,and wire mesh coupling solid particles on the flow characteristic and kLa were analyzed and compared.The results show that the gas-liquid interface area increases by 33%-72%when using the wire mesh coupling solid particles strategy compared to the gas-liquid two-phase flow,which is superior to the other two strengthening methods.Compared with the system without reinforcement,kLa in the bubble column increased by 0.5-1.8 times with wire mesh coupling solid particles method,which is higher than the sum of kLa increases with inserting wire mesh and adding particles,and the coupling reinforcement mechanism for affecting gas-liquid mass transfer process was discussed to provide a new idea for enhancing gas-liquid mass transfer.

Selective Technology Importation and the Convergence in the Late Qing Dynasty: Evidence from Wired Telegraph

Using the adoption and expansion of wired telegraph in China during the late 19^(th) century,this paper investigates the effect of cost reductions for knowledge exchange on China’s industrial growth before the outbreak of the War of Resistance Against Japanese Aggression(1931-1945),thus testing Baldwin’s theory of“the Great Convergence”in which developing countries are empowered by information and communication technologies.Based on panel data of 1858-1937,we found that wired telegraph access had a significantly positive effect,as well as a long-term growth effect,on the entry of industrial enterprises.Our mechanism analysis indicates that wired telegraph access accelerated early-stage industrialization in localities by encouraging market integration,human capital accumulation,and auxiliary commercial organizations.Only a few countries firmly asserted their telegraph sovereignty and set up their own workforce educational system during telegraph adoption.This explains why the Great Convergence arising from technology importation only occurred in a small number of countries.Our findings contribute to understanding the source of China’s modern industrial progress,as well as why global inequities remain.