As one of the main structural units in a building,a solid wood floor has significant strategic research value for low-carbon energy saving.Taking the production line of a solid larch wood floor as a case study,we asse...As one of the main structural units in a building,a solid wood floor has significant strategic research value for low-carbon energy saving.Taking the production line of a solid larch wood floor as a case study,we assessed the environmental load during production based upon a life cycle assessment.Using GaBi 6.0 software,we analyzed the associated carbon sequestration during floor production,with the initial planting density serving as the disturbance factor in a modular analysis.The results indicated that the cutting and finishing steps have relatively intense,negative influences on the environment,whereas transportation,ripping,and trimming do not.Additionally,recycling biomass waste has the potential to reduce greenhouse gas emissions.When the initial planting density was 3.0×3.0 m,carbon sequestration was relatively high.Although the emissions of freshwater pollutants,volatile organic compounds,and fine particulate matter（matter with a 2.5-μm diameter） were comparatively high,the reduction of greenhouse gas emissions was still excellent at this planting density.展开更多
According to the dara of trashed length, micro fiber angle, air density, ring width and late wood percentage, with the analysis of optimum method of classification, the boundary line of juvenile wood and maturewood of...According to the dara of trashed length, micro fiber angle, air density, ring width and late wood percentage, with the analysis of optimum method of classification, the boundary line of juvenile wood and maturewood of planted Chinese fir (Cunninghamia lanceolata) was determined as the 14th year. Based on the variationpattern of these parameters, the prediction equations were established. Wood quality prediction can be realizedby these equations. By error analysis between the values of measured data and the values of prediction data, it isfound that the results of wood prediction of planted Chinese fire are satisfactory.展开更多
Extraction of DNA from fresh tissues is routine in studies of tropical forest species, but DNA extraction from wood is considered as difficult due to its highly degraded nature and adequate quality of genomic DNA extr...Extraction of DNA from fresh tissues is routine in studies of tropical forest species, but DNA extraction from wood is considered as difficult due to its highly degraded nature and adequate quality of genomic DNA extraction is essential for molecular studies. Very few studies have validated the potential for isolating DNA from dried wood (Heartwood and Sapwood). Wood genomic DNA extraction is difficult from mature timber (Teak (Tectona grandis f;verbanaceae), Black Rosewood (Dalbergia latifolia f;Fabaceae) Ben Teak (Lagerstroemia lanceolata f;Lytheraceae) tissues due to presence of high quantity of secondary metabolites polyphenols, tannins and terpenoids and protein inhibitors. Mostly in laboratories DNA extraction kits are available but by using kits, DNA yield is very low and it is quite expensive too. We have standardized and validated the DNA extraction through manual protocol which is applicable for Bark, Sapwood and Heartwood samples of tree species which contains huge amount of inflexible tissues and fibers. The quality of the DNA was tested by spectrophotometer, gel electrophoresis and PCR (ISSR and SSR) amplification. An avrage DNA yield for heartwood ranges from 0.186 - 0.166 μg/μL and sapwood was ranges from 0.26 - 0.244 μg/μL. Modification of CTAB method was by addition of polyvinylpyrrolidone (PVP) appx 0.25%, variation in Rnase concentration, proteinase treatment with different concentration and incubation time. In order to evaluate the standardized wood genomic DNA extraction protocol, we compared it with the mature leaf and core samples (heartwood and sapwood) of the same timber species. The outcome was also quantified and proved by means of polymerase chain reaction analysis by using ISSR and SSR microsatellite markers conducted with isolated pure DNAs. This modified protocol made increased yield and purity of wood total genomic DNA and facilitate the important application of forensic timber species effort.展开更多
Context: Preliminary screening has been undertaken by woody species of Tamaulipan thornscrub for wood density and its utilization northeastern Mexico for different purposes and to find possible relationship of density...Context: Preliminary screening has been undertaken by woody species of Tamaulipan thornscrub for wood density and its utilization northeastern Mexico for different purposes and to find possible relationship of density with wood fibre characteristics. This technique can be used in the selection of species with high wood density for possible utility. Aims: It is to determine the variability in wood density and in fiber cell morphology and its length and among wood species of the Tamaulipan thornscrub, northeastern Mexico. Methods: Wood density and wood fibres are characterized in these woody species following standard methodology. Results: The results reveal large variability in wood density and in fibre cell morphology h. The species have been classified on the basis of wood density and its fibber cell morphology and has been recommended for their possible utilization for different purposes. Conclusions: Species desirable for strong furniture making, paper pulp, soft furniture, fence etc. can be selected on the basis of fibre length to breadth ratios as strong fibres for furniture and fibre cells with broad lumen and thin cell wall use for fabrication of paper pulp and other utilities.展开更多
基金supported by the Science and Technology Support Project for the Twelfth Five-year Grant in China(Grant No.2015BAD14B05)
文摘As one of the main structural units in a building,a solid wood floor has significant strategic research value for low-carbon energy saving.Taking the production line of a solid larch wood floor as a case study,we assessed the environmental load during production based upon a life cycle assessment.Using GaBi 6.0 software,we analyzed the associated carbon sequestration during floor production,with the initial planting density serving as the disturbance factor in a modular analysis.The results indicated that the cutting and finishing steps have relatively intense,negative influences on the environment,whereas transportation,ripping,and trimming do not.Additionally,recycling biomass waste has the potential to reduce greenhouse gas emissions.When the initial planting density was 3.0×3.0 m,carbon sequestration was relatively high.Although the emissions of freshwater pollutants,volatile organic compounds,and fine particulate matter（matter with a 2.5-μm diameter） were comparatively high,the reduction of greenhouse gas emissions was still excellent at this planting density.
文摘According to the dara of trashed length, micro fiber angle, air density, ring width and late wood percentage, with the analysis of optimum method of classification, the boundary line of juvenile wood and maturewood of planted Chinese fir (Cunninghamia lanceolata) was determined as the 14th year. Based on the variationpattern of these parameters, the prediction equations were established. Wood quality prediction can be realizedby these equations. By error analysis between the values of measured data and the values of prediction data, it isfound that the results of wood prediction of planted Chinese fire are satisfactory.
文摘Extraction of DNA from fresh tissues is routine in studies of tropical forest species, but DNA extraction from wood is considered as difficult due to its highly degraded nature and adequate quality of genomic DNA extraction is essential for molecular studies. Very few studies have validated the potential for isolating DNA from dried wood (Heartwood and Sapwood). Wood genomic DNA extraction is difficult from mature timber (Teak (Tectona grandis f;verbanaceae), Black Rosewood (Dalbergia latifolia f;Fabaceae) Ben Teak (Lagerstroemia lanceolata f;Lytheraceae) tissues due to presence of high quantity of secondary metabolites polyphenols, tannins and terpenoids and protein inhibitors. Mostly in laboratories DNA extraction kits are available but by using kits, DNA yield is very low and it is quite expensive too. We have standardized and validated the DNA extraction through manual protocol which is applicable for Bark, Sapwood and Heartwood samples of tree species which contains huge amount of inflexible tissues and fibers. The quality of the DNA was tested by spectrophotometer, gel electrophoresis and PCR (ISSR and SSR) amplification. An avrage DNA yield for heartwood ranges from 0.186 - 0.166 μg/μL and sapwood was ranges from 0.26 - 0.244 μg/μL. Modification of CTAB method was by addition of polyvinylpyrrolidone (PVP) appx 0.25%, variation in Rnase concentration, proteinase treatment with different concentration and incubation time. In order to evaluate the standardized wood genomic DNA extraction protocol, we compared it with the mature leaf and core samples (heartwood and sapwood) of the same timber species. The outcome was also quantified and proved by means of polymerase chain reaction analysis by using ISSR and SSR microsatellite markers conducted with isolated pure DNAs. This modified protocol made increased yield and purity of wood total genomic DNA and facilitate the important application of forensic timber species effort.
文摘Context: Preliminary screening has been undertaken by woody species of Tamaulipan thornscrub for wood density and its utilization northeastern Mexico for different purposes and to find possible relationship of density with wood fibre characteristics. This technique can be used in the selection of species with high wood density for possible utility. Aims: It is to determine the variability in wood density and in fiber cell morphology and its length and among wood species of the Tamaulipan thornscrub, northeastern Mexico. Methods: Wood density and wood fibres are characterized in these woody species following standard methodology. Results: The results reveal large variability in wood density and in fibre cell morphology h. The species have been classified on the basis of wood density and its fibber cell morphology and has been recommended for their possible utilization for different purposes. Conclusions: Species desirable for strong furniture making, paper pulp, soft furniture, fence etc. can be selected on the basis of fibre length to breadth ratios as strong fibres for furniture and fibre cells with broad lumen and thin cell wall use for fabrication of paper pulp and other utilities.
