Qualitative and Quantitative Characterization of Wood Fibers of Shrubs and Tree Species of the Tamaulipan Thorn Scrub, Northeastern Mexico and Its Possible Relation to Wood Quality and Utilization

The present study was undertaken to determine the variability in fiber cell morphology and its length among wood species of the Tamaulipan Thorn Scrub, Northeastern Mexico, used for various uses such as timber for furniture, fence, post, firewood and sources of forage. The results reveal large variability in fiber cell morphology and fiber cell dimensions. The species are classified on the basis of its fiber cell morphology and fiber cell length and recommended for their possible utilization for different purposes. Wood having fibre cells with broad lumen and thin wall could be suitable for the manufacture of paper documented in the literature viz. Acacia farnesciana, Caesalpinia mexicana, Cordia boisiieri, Diospyros palmeri, Forestieria angustifolia, Morus celtifolia, Prosopis laevigata. This technique can be used in preliminary screening of woody species for its utilization for different purposes. Further studies are needed to confirm.

Static Bending Creep Properties of Glass Fiber Surface Composite Wood

To study the static bending creep properties of glass fiber reinforced wood,glass fiber reinforced poplar(GFRP)specimens were obtained by pasting glass fiber on the upper and lower surfaces of Poplar(Populus euramevicana,P),the performance of Normal Creep(NC)and Mechanical Sorptive Creep(MSC)of GFRP and their influencing factors were tested and analyzed.The test results and analysis show that:(1)The MOE and MOR of Poplar were increased by 17.06%and 10.00%respectively by the glass fiber surface reinforced composite.(2)The surface reinforced P with glass fiber cloth only exhibits the NC pattern of wood and loses the MSC characteristics of wood,regardless of the constant or alternating changes in relative humidity.(3)The instantaneous elastic deformation,viscoelastic deformation,viscous deformation and total creep deflection of GFRP are positively correlated with the stress level of the external load applied to the specimen.Still,the specimen’s creep recovery rate is negatively correlated with the stress level of the external load applied to the specimen.The static creep deflection and viscous deformation of GFRP increase with the increase of the relative humidity of the environment.(4)The MSC maximum creep deflection of GFRP increased by only 7.41%over the NC maximum creep deflection,but the MSC maximum creep deflection of P increased by 199.25%over the NC maximum creep deflection.(5)The Burgers 4-factor model and the Weibull distribution equation can fit the NC and NC recovery processes of GFRP well.

Bio-PCM Panels Composed of Renewable Materials Interact with Solar Heating Systems for Building Thermal Insulation

This article aims to present the feasibility of storing thermal energy in buildings for solar water heating while maintaining the comfort environment for residential buildings.Our contribution is the creation of insulating composite panels made of bio-based phase change materials(bio-PCM is all from coconut oil),cement and renewable materials(treated wood fiber and organic clay).The inclusion of wood fibers improved the thermal properties;a simple 2%increase of wood fiber decreased the heat conductivity by approximately 23.42%.The issues of bio-PCM leakage in the cement mortar and a roughly 56.5%reduction in thermal conductivity with bio-PCM stability in composite panels can be resolved by treating wood fibers with an adjuvant by impregnating them in bio-PCM in the presence of the treated clay generated.Clay and wood fiber were treated with adjuvants that are both biological and environmentally acceptable,as confirmed by FTIR spectroscopy.The heat transfer bench(DIDATEK)showed a decrease in thermal conductivity.By using differential scanning calorimetric(DSC)analysis,the investigation of thermal stability and enthalpy during two heating cycles of pure bio-PCM and composite bio-PCM was validated.The novel renewable material was used to create composite panels for the trial prototype,which took the shape of a component attached to the solar heating system,33.57%less heat was lost,according to the heat transfer research.The outcomes demonstrated the possibility of replacing traditional electric water heating in residential buildings with solar water heating systems.

Properties of paper mill sludge–wood fiber–HDPE composites after exposure to xenon-arc weathering

We used paper mill sludge（PMS） to substitute for part of the wood fibers（WF） used to reinforce high density polyethylene（HDPE）.The resulting composites were subjected to xenon-arc weathering.The composite filled with limited PMS（under 10 %） had mechanical properties and aging resistance similar to those without PMS.The composites containing more PMS faded and cracked more readily than those without PMS.Based on the carbonyl index,crystallinity,and wood index,PMS appeared to accelerate the degradation of composites during weathering.Adding PMS to WF–HDPE composites reduced the weathering resistance,and this reduction was not significant if the PMS content did not exceed 20 % of the wood fibers.Therefore,PMS could be used as a reinforcement in wood-plastic composites at levels less than20 % of the wood fiber content.

The Accelerated Thermo-Oxidative Aging Characteristics of Wood Fiber/Polycaprolactone Composite:Effect of Temperature,Humidity and Time

This study investigated the characteristics of wood fiber/polycaprolactone composite after an artificial accelerated thermo-oxidative aging treatment.The effect of time,temperature and humidity during the treatment on their mechanical,chemical and morphology properties were evaluated.The composite was prepared from melted wood fibers and modified polycaprolactone by a molding process.A temperature and humidity controllable test chamber was used for the thermo-oxidative aging of the composite.The thermo-oxidative aging caused surface of the composite to be much more rougher and even a few cracks and holes appeared on it.According to the spectra of Fourier Transform Infrared(FTIR)and Gel Permeation Chromatography(GPC),C=O in the molecular chain of polycaprolactone was hydrolyzed and C–O was broken after the aging treatment,which resulted in a reduction in average molecular weight of the composite.Moreover,results showed that the mechanical strength decreased a lot with the increase in time,temperature and humidity,and the effect of temperature and humidity was more significant compared with that of time.Controlling the temperature and humidity during thermo-oxidative aging treatment could accelerate the aging of composite,which provided a quick and effective method for evaluating the aging resistance of the composite.

Effects of wollastonite nanofibers on fluid flow in medium-density fiberboard

We studied the effect of wollastonite nanofibers on fluid flow in medium-density fiberboard （MDF）. Nanowollastonite （NW） was applied in MDF at 10 %, based on the dry weight of wood fibers. We also tested chicken feathers as an additive to the matrix at 5 and 10 % by weight. The weight of feathers was reduced from the wood fibers to keep the density of the panels constant （0.66 g cm-3）. Wollastonite nanofibers acted as filler in the matrix and significantly decreased gas and liquid perme- ability. Higher thermal conductivity of the N-W-treated MDF-mats resulted in a better cure of resin, and conse- quently more integrity in the composite-matrix and lower permeability. The water-repellant property of wollastonite also contributed to the decrease in liquid permeability. Feathers reduced gas and liquid permeability due to the hydrophobic nature of keratin, as well as its formation as a physical barrier towards passing of fluids. Ten percent feather content proved too high and some checks and cracks occurred in the core of the panels after hot-pressing. Panels with 5 %-feather content resulted in both lower fluid flow and adequate physical integrity in the core sec- tion of the MDF-matrix.

Effect of Photostablizers on Surface Color and Mechanical Property of Wood-flour/HDPE Composites after Weathering

The effects of photostabilizers of ultraviolet absorbers （UVA）, hindered amine light stabilizer （HALS） and pigment on surface color change and mechanical properties of weathered wood-flour/ polyethylene （HDPE） composites were investigated. After being added UVA with high UV absorbance, the WPC exhibites better ability to resist color fading and mechanical property loss. High molecular weight HALS is found to be the most effective in controlling long term fading and yellowing changes. Pigments cover the composites for remaining the original color after weathering regardless of less contribution to mechanical property. Addition of photostabilizer and pigment together show great synergism in decreasing color fading and flexural property loss.

Effect of the suppression of BpAP1 on the expression of lignin related genes in birch

Lignin is an integral part of secondary cell walls in plants and plays important roles in maintaining the strength of stems,enhancing transport ability of stems,and providing resistance to multiple stresses.Lignin biosynthesis has become one of the hotspots in molecular forest biology research.The AP1 transcription factor plays important roles in plant fower development.However,in this study,suppression of BpAP1 altered the transcription profiles of white birch and RNA-seq was used to find that suppression of BpAP1 changed the expression of lignin pathway-related genes;C4 H/CYP73A,POD were down-regulated and HCT,CCoAOMT,REF1 and CAD were up-regulated.Cell walls of the suppressed transgenic birch were significantly thinner than the wild type of birch,and Bp AP1-repressed birch contained less lignin.In addition to regulation of foral development,BpAP1 might play a role in regulating the expression of genes in lignin biosynthesis of birch.This study could provide a new insight into the function of AP1 genes in woody species.

Recent progress on green electromagnetic shielding materials based on macro wood and micro cellulose components from natural agricultural and forestry resources

Recent research efforts in the field of electromagnetic interference shielding(EMI)materials have focused on biomass as a green and sustainable resource.More specifically,wood and cellulose nano fiber(CNF)have many advantages,some of which include lightweight,porosity,widespread availability,low cost,and easy processing.These favorable properties have led researchers to consider these types of biomass as an EMI shielding material with great potential.At present,while many excellent published works in EMI shielding materials have investigated wood and CNF,this research area is still new,compared with non-biomass EMI shielding materials.More specifically,there is still a lack of in-depth research and summary on the preparation process,pore structure regulation,component optimization,and other factors affecting the EMI shielding of wood and CNF based EMI shielding materials.Thus,this review paper presents a comprehensive summary of recent research on wood and CNF based EMI shielding materials in recent three years in terms of the preparation methods,material structure design,component synergy,and EMI mechanism,and a forward future perspective for existing problems,challenges,and development trend.The ultimate goal is to provide a comprehensive and informative reference for the further development and exploration of biomass EMI shielding materials.

Effect of Wood Variables on the Properties of Wood Fiber-Polypropylene Composites

The effect of wood species (Chinese fir and Poplar), wood fiber content (10%, 25%, 40%) and wood fiber sizes (16 to 32 mesh, 32-65 mesh, above 65 mesh) on the properties of the wood fiber-Polypropylene composites were studied in this paper. The results indicate that the effect of wood fiber content and size in composite were more important than that of chosen wood species. Compared with polypropylene without wood fiber, the flexural strength of the composites increased when adding wood fiber into polypr...