Characterization and Influence of Nanofiber Flours of Wood Modified on Fresh State Properties of Cement Based Mortars

Nanofibrillated wood fiber was used as fillers in the partial cement matrix replacing the cement to a content of up to 2%by weight of cement.The nanofibrillated effect of wood fibers on porosity,thermal properties and compressive strength was studied.The results obtained showed an improvement in compressive strength of more than 40%with 1%by weight of wood fiber nanofibrillate.The addition of nanofibrillated wood fiber shows a good pore reduction,and the best result was obtained with emulsion of a mixture incorporating 1%by weight of wood fiber nanofibrillate in the presence of an anionic surfactant(SDBS).Thermal conductivity measurements and thermal expansion coefficient,compared to nanofibrillated wood fiber reinforced cement pastes,showed the reinforcing efficiency of cellulose fiber nanofibrillate.The degree of hydration of the cement increased with nanofibrillated wood fibers.This property has been confirmed by Fourier transform infrared spectroscopy.These analyzes revealed that the presence of nanofibrillated wood fibers generates and promotes the hydration of the cement,producing more portlandite and calcium silicate gel,which influences the compressive strength which gives a strong improvement.

Influence and Dispersion of Nanofiber of Wood Modified on Properties of Cement Based Mortars

Wood nanofibers from industrial waste have been used as polymeric material to reinforce the cement paste to a content of up to 2%by weight of cement.The effect of the wood nanofibre content on the porosity,the compressive strength and the degree of hydration of the cement was studied.The results showed an improvement in compressive strength of over 50%with 1%of added fiberwood.Chemical modification of nanofiber wood by grafting alkyl chains to their surface can reduce the amount of water absorbed by the sample.Addition of an anionic additive(SDBS)to the mixing water improves the surface of the samples more and more by minimizing the pore size by emulsion effect,hence the water absorption decreases.The degree of hydration of the cement increased with the cellulose content containing nanofibrils.The analysis revealed that the presence of nanofibers favored the hydration of the cement by producing more calcium silicate gel and portlandite,probably the main reason for this improvement in compressive strength.

DETERMINE ON INITIAL DIMENSIONAL STABILITY OF CHEMICAL MODIFIED WOOD

Strain development along radial direction was continuously determined by D-200 Linear Variable Differential Transformers (L.V.D.T). When a wood specimen was put into water and begin to swell from absolute dry moisture content to the maximum. Experiment results show that the differences of swelling with soaking time between untreated and treated wood specimens due to uptaking water. It would also give an indication to the effectiveness of various chemicals on the dimensional stability of modified wood. ASE of modified wood samples with SA-EP, EP and SA were found to be better than MA-AGE. SA-EP had got the best effetivencss on dimensional stability in reducing the swelling.

Water-repellent efficiency of thermally modified wood as affected by its permeability

This study shows how the air permeability of thermally modified wood contributes to its water-repellent efficiency. For this purpose, freshly cut boards of hornbeam(Carpinus betulus), poplar(Populus nigra), and heartwood of oak(Quercus castanifolia) were modified at a steam temperature of 180 °C for 3 h inside a Thermo Wood kiln.The porous structure, permeability, and water uptake of wood were affected differently by thermal modification,depending on the wood species. The creation of microcracks in the cell walls, due to collapsing of fiber cells,resulted in a noticeable increase in the permeability of hornbeam. Despite checking in the poplar wood structure,its permeability was negatively affected by thermal modification. In contrast to oak and poplar, a negative waterrepellent efficiency was observed for the modified hornbeam, caused by an increase in the permeability.

Systematic study on the proton radioactivity of spherical proton emitters

In this study, based on a two-potential approach, we systematically investigated the proton radioactivity half-lives of spherical proton emitters with 69≤Z≤81 from the ground and/or isomeric state, choosing the nuclear potential to be a modified Woods–Saxon potential that contains the isospin effect of the daughter nucleus. It was found that the calculated half-lives could reproduce the experimental data well. Furthermore, we extended this model to predict the half-lives of 17 protonemitting candidates whose radioactivity is energetically allowed or observed but not yet quantified in NUBASE2020. For comparison, the unified fission model, Coulomb potential and proximity potential model, universal decay law for proton emission, and new Geiger–Nuttall law were also used. All the predicted results are consistent with each other.