This study compares the test results of the FAST (Fabric Assurance by Simple Testing) with those of the KES - F (Kawabata Evaluation Systems for Fabrics) for a range of nineteen light weight wool and wool blend fabric...This study compares the test results of the FAST (Fabric Assurance by Simple Testing) with those of the KES - F (Kawabata Evaluation Systems for Fabrics) for a range of nineteen light weight wool and wool blend fabrics in terms of the low - stress mechanical properties of bending, shear, and tensile deformation. It is found that there are very significant correlations between the corresponding parameters for extensibility and shear rigidity obtained from the test results of the two systems. The correlation between the values of bending rigidity obtained from the two systems is only moderate. Furthermore, for the fabrics tested in this study, the values of bending rigidity, shear rigidity, and extensibility measured using the KES - F instruments are higher than those of the corresponding parameters measured using the FAST instruments. The linear regression equation is given for each pair of corresponding parameter.展开更多
The wool fabrics were treated with low temperature plasma (LTP) using three different gases, namely (ⅰ) oxygen, (ⅱ) nitrogen and (ⅲ) 25％ hydrogen/75％ nitrogen gas mixture. After LTP treatment, the low stress mech...The wool fabrics were treated with low temperature plasma (LTP) using three different gases, namely (ⅰ) oxygen, (ⅱ) nitrogen and (ⅲ) 25％ hydrogen/75％ nitrogen gas mixture. After LTP treatment, the low stress mechanical properties, surface properties and thermal properties of the fabrics were investigated by kES-F (Kawabata Evaluation System) Instruments composing of KES-FBI for tensile and shear property measurement, KES-FB2 for pure bending measurement, kES-FB3 for compression measurement, KES-FB4 for surface friction and surface roughness measurement, and KES-F7 for thermal property measurement. The first four instruments were used for investigating the charaeterlstlc aspect related to fabrle hand while the last one was mainly for the fabric comfort. The properties of LTP treated fabrics under the effect of different gases were compared with the untreated fabric quantitatively.展开更多
The interaction between particle size and resin content is one of the most important structural parameters that can influence the accuracy of predictions about wood-composite properties. We developed three kinds of eq...The interaction between particle size and resin content is one of the most important structural parameters that can influence the accuracy of predictions about wood-composite properties. We developed three kinds of equation （linear, quadratic, and exponential） for each mechanical property of particleboard based on slenderness ratio and resin content at a constant density （0.7g cm -3 ）. Results from SHAZAM software （version 9） suggested that the quadratic function was not significant, but the linear and exponential functions were significant. The interaction between particle size and resin content was analyzed by Maple 9 software. The results indicated that an exponential function can better describe the simultaneous effect of slenderness and resin content than a linear equation. Under constant resin content, particles with higher slenderness ratios increased more in modulus of rupture （MOR） and modulus of elasticity （MOE） than did particles with lower slenderness ratios. Edge withdrawal resistance （SWRe） values did not increase with increasing slenderness ratio.展开更多
Density and resin content are two factors that have a significant effect on the production cost of wood composite. However, particle size affects resin content and density, which suggests that the interaction of these...Density and resin content are two factors that have a significant effect on the production cost of wood composite. However, particle size affects resin content and density, which suggests that the interaction of these three factors can be manipulated to reduce the board density and resin content of particleboard without adversely influencing its mechanical properties. Some mathematical functional forms based on resin content, board density and slenderness ratio were regressed and an appropriate form was chosen. According to analysis of the results using SHAZAM 9 software, the exponential function best fit the experimental data. Finally, ＂indifference curves＂ of mechanical properties were illustrated and analyzed. The results indicated that negative effects of density or resin content reduction on mechanical properties could be compensated for by controlling particles＇ slenderness ratio. Interestingly, increases in slenderness ratio compensated for the negative effects of decreases in resin content or board density on module of rupture （MOR） and module of elasticity （MOE）. Moreover, this ＂compensation ratio＂ intensified as resin content or density decreased and/or as the MOR or MOE increased. On the other hand, reduction in slenderness ratio indicated a comple- mentary effect on reducing internal bond （IB） strength, a result of decreases in resin content or density. Moreover, this ＂complementary ratio＂ was intensified as resin content or density decreased and/or as IB strength increased.展开更多
基金This project was generously funded by International Wool Secretariat
文摘This study compares the test results of the FAST (Fabric Assurance by Simple Testing) with those of the KES - F (Kawabata Evaluation Systems for Fabrics) for a range of nineteen light weight wool and wool blend fabrics in terms of the low - stress mechanical properties of bending, shear, and tensile deformation. It is found that there are very significant correlations between the corresponding parameters for extensibility and shear rigidity obtained from the test results of the two systems. The correlation between the values of bending rigidity obtained from the two systems is only moderate. Furthermore, for the fabrics tested in this study, the values of bending rigidity, shear rigidity, and extensibility measured using the KES - F instruments are higher than those of the corresponding parameters measured using the FAST instruments. The linear regression equation is given for each pair of corresponding parameter.
文摘The wool fabrics were treated with low temperature plasma (LTP) using three different gases, namely (ⅰ) oxygen, (ⅱ) nitrogen and (ⅲ) 25％ hydrogen/75％ nitrogen gas mixture. After LTP treatment, the low stress mechanical properties, surface properties and thermal properties of the fabrics were investigated by kES-F (Kawabata Evaluation System) Instruments composing of KES-FBI for tensile and shear property measurement, KES-FB2 for pure bending measurement, kES-FB3 for compression measurement, KES-FB4 for surface friction and surface roughness measurement, and KES-F7 for thermal property measurement. The first four instruments were used for investigating the charaeterlstlc aspect related to fabrle hand while the last one was mainly for the fabric comfort. The properties of LTP treated fabrics under the effect of different gases were compared with the untreated fabric quantitatively.
文摘The interaction between particle size and resin content is one of the most important structural parameters that can influence the accuracy of predictions about wood-composite properties. We developed three kinds of equation （linear, quadratic, and exponential） for each mechanical property of particleboard based on slenderness ratio and resin content at a constant density （0.7g cm -3 ）. Results from SHAZAM software （version 9） suggested that the quadratic function was not significant, but the linear and exponential functions were significant. The interaction between particle size and resin content was analyzed by Maple 9 software. The results indicated that an exponential function can better describe the simultaneous effect of slenderness and resin content than a linear equation. Under constant resin content, particles with higher slenderness ratios increased more in modulus of rupture （MOR） and modulus of elasticity （MOE） than did particles with lower slenderness ratios. Edge withdrawal resistance （SWRe） values did not increase with increasing slenderness ratio.
文摘Density and resin content are two factors that have a significant effect on the production cost of wood composite. However, particle size affects resin content and density, which suggests that the interaction of these three factors can be manipulated to reduce the board density and resin content of particleboard without adversely influencing its mechanical properties. Some mathematical functional forms based on resin content, board density and slenderness ratio were regressed and an appropriate form was chosen. According to analysis of the results using SHAZAM 9 software, the exponential function best fit the experimental data. Finally, ＂indifference curves＂ of mechanical properties were illustrated and analyzed. The results indicated that negative effects of density or resin content reduction on mechanical properties could be compensated for by controlling particles＇ slenderness ratio. Interestingly, increases in slenderness ratio compensated for the negative effects of decreases in resin content or board density on module of rupture （MOR） and module of elasticity （MOE）. Moreover, this ＂compensation ratio＂ intensified as resin content or density decreased and/or as the MOR or MOE increased. On the other hand, reduction in slenderness ratio indicated a comple- mentary effect on reducing internal bond （IB） strength, a result of decreases in resin content or density. Moreover, this ＂complementary ratio＂ was intensified as resin content or density decreased and/or as IB strength increased.
