We report the fabrication of 4-inch nano patterned wafer by two-beam laser interference lithography and analyze the uniformity in detail. The profile of the dots array with a period of 800 nm divided into five regions...We report the fabrication of 4-inch nano patterned wafer by two-beam laser interference lithography and analyze the uniformity in detail. The profile of the dots array with a period of 800 nm divided into five regions is characterized by a scanning electron microscope. The average size in each region ranges from 270 nm to 320 nm,and the deviation is almost 4%, which is approaching the applicable value of 3% in the industrial process. We simulate the two-beam laser interference lithography system with MATLAB software and then calculate the distribution of light intensity around the 4 inch area. The experimental data fit very well with the calculated results. Analysis of the experimental data and calculated data indicates that laser beam quality and space filter play important roles in achieving a periodical nanoscale pattern with high uniformity and large area. There is the potential to obtain more practical applications.展开更多
In previous research much effort has been devoted to the geometry of woven fabrics and relat-ed problems under the assumption of constant yarn configuration in fabric.This paper will first re-port that image crimp (ya...In previous research much effort has been devoted to the geometry of woven fabrics and relat-ed problems under the assumption of constant yarn configuration in fabric.This paper will first re-port that image crimp (yarn crimp measured by an image analysis method) seems larger than actualvalue.From the explanation of this result,the variation of yarn configuration in woven fabric dueto the non-uniform flattening is revealed.The significance of this actual structure of woven fabricsis discussed.It is believed that the variation of yarn configuration is very important for fabric per-formance,and may be an advantage for fabric quality.展开更多
为使纬编针织物具有更真实的力学效果和体积感,在改进的弹簧-质点模型基础上对线圈进行结构建模。同时采用插值算法,在相邻型值点间插入2个新的型值点,用非均匀有理B样条曲线(NURBS)连接线圈型值点,解决了NURBS不能穿过所有型值点的问...为使纬编针织物具有更真实的力学效果和体积感,在改进的弹簧-质点模型基础上对线圈进行结构建模。同时采用插值算法,在相邻型值点间插入2个新的型值点,用非均匀有理B样条曲线(NURBS)连接线圈型值点,解决了NURBS不能穿过所有型值点的问题。为模拟股线的捻度,以此样条曲线为几何中心,用4根圆柱围绕,通过对相邻型值点的空间坐标计算3个相对欧拉角,对圆柱进行相应的旋转变换。测量了真实线圈的形变量,分析出线圈形变量与质点位移量的关系来模拟线圈变形。用Velocity-Verlet数值积分方法求解力学方程,计算各质点位移。借助于Microsoft Visual Studio 2010集成开发工具和Open GL三维绘图函数库,在计算机上实现了纬编织物的三维建模和变形仿真。展开更多
基金Supported by the Scientific Equipment Research Program of Chinese Academy of Sciences under Grant No 2014Y4201449
文摘We report the fabrication of 4-inch nano patterned wafer by two-beam laser interference lithography and analyze the uniformity in detail. The profile of the dots array with a period of 800 nm divided into five regions is characterized by a scanning electron microscope. The average size in each region ranges from 270 nm to 320 nm,and the deviation is almost 4%, which is approaching the applicable value of 3% in the industrial process. We simulate the two-beam laser interference lithography system with MATLAB software and then calculate the distribution of light intensity around the 4 inch area. The experimental data fit very well with the calculated results. Analysis of the experimental data and calculated data indicates that laser beam quality and space filter play important roles in achieving a periodical nanoscale pattern with high uniformity and large area. There is the potential to obtain more practical applications.
文摘In previous research much effort has been devoted to the geometry of woven fabrics and relat-ed problems under the assumption of constant yarn configuration in fabric.This paper will first re-port that image crimp (yarn crimp measured by an image analysis method) seems larger than actualvalue.From the explanation of this result,the variation of yarn configuration in woven fabric dueto the non-uniform flattening is revealed.The significance of this actual structure of woven fabricsis discussed.It is believed that the variation of yarn configuration is very important for fabric per-formance,and may be an advantage for fabric quality.
文摘为使纬编针织物具有更真实的力学效果和体积感,在改进的弹簧-质点模型基础上对线圈进行结构建模。同时采用插值算法,在相邻型值点间插入2个新的型值点,用非均匀有理B样条曲线(NURBS)连接线圈型值点,解决了NURBS不能穿过所有型值点的问题。为模拟股线的捻度,以此样条曲线为几何中心,用4根圆柱围绕,通过对相邻型值点的空间坐标计算3个相对欧拉角,对圆柱进行相应的旋转变换。测量了真实线圈的形变量,分析出线圈形变量与质点位移量的关系来模拟线圈变形。用Velocity-Verlet数值积分方法求解力学方程,计算各质点位移。借助于Microsoft Visual Studio 2010集成开发工具和Open GL三维绘图函数库,在计算机上实现了纬编织物的三维建模和变形仿真。