A Review on Technologies for the Use of CO2 as a Working Fluid in Refrigeration and Power Cycles

The use of carbon dioxide as a working fluid has been the subject of extensive studies in recent years, particularly in the field of refrigeration where it is at the heart of research to replace CFC and HCFC. Its thermodynamic properties make it a fluid of choice in the efficient use of energy at low and medium temperatures in engine cycles. However, the performance of transcritical CO2 cycles weakens under high temperature and pressure conditions, especially in refrigeration systems;On the other hand, this disadvantage becomes rather interesting in engine cycles where CO2 can be used as an alternative to the organic working fluid in small and medium-sized electrical systems for low quality or waste heat sources. In order to improve the performance of systems operating with CO2 in the field of refrigeration and electricity production, research has made it possible to develop several concepts, of which this article deals with a review of the state of the art, followed by analyzes in-depth and critical of the various developments to the most recent modifications in these fields. Detailed discussions on the performance and technical characteristics of the different evolutions are also highlighted as well as the factors affecting the overall performance of the systems studied. Finally, perspectives on the future development of the use of CO2 in these different cycles are presented.

The action mechanism of the work done by the electric field force on moving charges to stimulate the emergence of carrier generation/recombination in a PN junction

It is discovered that the product of the current and the electric field in a PN junction should be regarded as the rate of work(power)done by the electric field force on moving charges(hole current and electron current),which was previously misinterpreted as solely a Joule heating effect.We clarify that it is exactly the work done by the electric field force on the moving charges to stimulate the emergence of non-equilibrium carriers,which triggers the novel physical phenomena.As regards to Joule heat,we point out that it should be calculated from Ohm’s law,rather than simply from the product of the current and the electric field.Based on this understanding,we conduct thorough discussion on the role of the electric field force in the process of carrier recombination and carrier generation.The thermal effects of carrier recombination and carrier generation followed are incorporated into the thermal equation of energy.The present study shows that the exothermic effect of carrier recombination leads to a temperature rise at the PN interface,while the endothermic effect of carrier generation causes a temperature reduction at the interface.These two opposite effects cause opposite heat flow directions in the PN junction under forward and backward bias voltages,highlighting the significance of managing device heating phenomena in design considerations.Therefore,this study possesses referential significance for the design and tuning on the performance of piezotronic devices.

A Study on the Work Process-Based Practical Training Model for Basic Nursing Skills in Vocational Colleges

Objective:To explore and analyze the work process-based practical training teaching model for basic nursing skills in vocational colleges and its implementation effects.Methods:A total of 82 nursing students from our school were selected for the study,which was conducted from April 2023 to April 2024.Using a random number table method,the students were divided into an observation group and a control group,each with 41 students.The control group received conventional practical training teaching,while the observation group followed the work process-based practical training model for basic nursing skills.The assessment scores and teaching satisfaction of the two groups were compared.Results:The comparison of assessment scores showed that the observation group performed significantly better than the control group(P<0.05).The comparison of teaching satisfaction also indicated that the observation group had significantly higher satisfaction than the control group(P<0.05).Conclusion:The work process-based practical training teaching model for basic nursing skills in vocational colleges can improve students’assessment scores and enhance teaching satisfaction,demonstrating its value for wider application.

Work in Cooperation for A New Chapter in the Cause of International Human Rights——Speech by Yang Jiechi,Vice Minister of Foreign Affairs of the People's Republic of China at the Inaugural Session of the United Nations Human Rights Council

Mr Chairman, I would like to start by congratulating you, on behalf of the Chinese Govern- ment, on your assumption of the Chair of the inaugural session of the Human Rights Council. I have every confidence that under your able leadership this session will be successful.

UAV-assisted data collection for wireless sensor networks with dynamic working modes

Wireless Sensor Network(WSN)is a cornerstone of Internet of Things(IoT)and has rich application scenarios.In this work,we consider a heterogeneous WSN whose sensor nodes have a diversity in their Residual Energy(RE).In this work,to protect the sensor nodes with low RE,we investigate dynamic working modes for sensor nodes which are determined by their RE and an introduced energy threshold.Besides,we employ an Unmanned Aerial Vehicle(UAV)to collect the stored data from the heterogeneous WSN.We aim to jointly optimize the cluster head selection,energy threshold and sensor nodes’working mode to minimize the weighted sum of energy con-sumption from the WSN and UAV,subject to the data collection rate constraint.To this end,we propose an efficient search method to search for an optimal energy threshold,and develop a penalty-based successive convex approximation algorithm to select the cluster heads.Then we present a low-complexity iterative approach to solve the joint optimization problem and discuss the implementation procedure.Numerical results justify that our proposed approach is able to reduce the energy consumption of the sensor nodes with low RE significantly and also saves energy for the whole WSN.

Flow characteristics and hot workability of a typical low-alloy high-strength steel during multi-pass deformation

Heavy components of low-alloy high-strength(LAHS) steels are generally formed by multi-pass forging. It is necessary to explore the flow characteristics and hot workability of LAHS steels during the multi-pass forging process, which is beneficial to the formulation of actual processing parameters. In the study, the multi-pass hot compression experiments of a typical LAHS steel are carried out at a wide range of deformation temperatures and strain rates. It is found that the work hardening rate of the experimental material depends on deformation parameters and deformation passes, which is ascribed to the impacts of static and dynamic softening behaviors. A new model is established to describe the flow characteristics at various deformation passes. Compared to the classical Arrhenius model and modified Zerilli and Armstrong model, the newly proposed model shows higher prediction accuracy with a confidence level of 0.98565. Furthermore, the connection between power dissipation efficiency(PDE) and deformation parameters is revealed by analyzing the microstructures. The PDE cannot be utilized to reflect the efficiency of energy dissipation for microstructure evolution during the entire deformation process, but only to assess the efficiency of energy dissipation for microstructure evolution in a specific deformation parameter state.As a result, an integrated processing map is proposed to better study the hot workability of the LAHS steel, which considers the effects of instability factor(IF), PDE, and distribution and size of grains. The optimized processing parameters for the multi-pass deformation process are the deformation parameters of 1223–1318 K and 0.01–0.08 s^(-1). Complete dynamic recrystallization occurs within the optimized processing parameters with an average grain size of 18.36–42.3 μm. This study will guide the optimization of the forging process of heavy components.

A Fast Multi-tasking Solution: NMF-Theoretic Co-clustering for Gear Fault Diagnosis under Variable Working Conditions

Most gear fault diagnosis(GFD)approaches su er from ine ciency when facing with multiple varying working conditions at the same time.In this paper,a non-negative matrix factorization(NMF)-theoretic co-clustering strategy is proposed specially to classify more than one task at the same time using the high dimension matrix,aiming to o er a fast multi-tasking solution.The short-time Fourier transform(STFT)is first used to obtain the time-frequency features from the gear vibration signal.Then,the optimal clustering numbers are estimated using the Bayesian information criterion(BIC)theory,which possesses the simultaneous assessment capability,compared with traditional validity indexes.Subsequently,the classical/modified NMF-based co-clustering methods are carried out to obtain the classification results in both row and column tasks.Finally,the parameters involved in BIC and NMF algorithms are determined using the gradient ascent(GA)strategy in order to achieve reliable diagnostic results.The Spectra Quest’s Drivetrain Dynamics Simulator gear data sets were analyzed to verify the e ectiveness of the proposed approach.

RENEWAL OF BASIC LAWS AND PRINCIPLES FOR POLAR CONTINUUM THEORIES (Ⅷ)—PRINCIPLE OF TOTAL WORK AND ENERGY

Theoretical incompleteness of the existing conservation laws of energy for polar continuum mechanics is further clarified. For completeness, the principles of total work and energy and of total work and energy of incremental rate type are postulated. Via total variations of the former and the latter of them, the principles of virtual displacement and microrotation & stress and couple stress as well as virtual velocity and angular velocity & stress rate and couple stress rate are immediately obtained, respectively. From these principles all balance equations and boundary conditions for micropolar mechanics are naturally and simultaneously deduced. The essential differences between the nontraditional results obtained in this paper and the existing conservation laws of energy are expounded.

Closed-form dynamics of a hexarot parallel manipulator by means of the principle of virtual work

In this research,a systematic approach to solving the inverse dynamics of hexarot manipulators is addressed using the methodology of virtual work.For the first time,a closed form of the mathematical formulation of the standard dynamic model is presented for this class of mechanisms.An efficient algorithm for solving this closed-form dynamic model of the mechanism is developed and it is used to simulate the dynamics of the system for different trajectories.Validation of the proposed model is performed using SimMechanics and it is shown that the results of the proposed mathematical model match with the results obtained by the SimMechanics model.

Formulation of Work-Study Combined and Result-Oriented Integrated Curriculum Standards

According to the Annex Technical Regulations for Integrated Curriculum Development(Trial)in Document No.30 of the General Office of the Ministry of Human Resources and Social Security(2012),this paper studies the formulation of the curriculum standards for the integration of Chinese medicinal materials production.We focus on the formulation ideas of the curriculum standards for the integration of Chinese medicinal materials production,the formulation process of the curriculum standards for the integration of Chinese medicinal materials production,including the description of typical work tasks,the determination of curriculum objectives,the analysis of study content,the description of referential study tasks,teaching implementation suggestions,assessment and evaluation suggestions,which can provide a reference for the development and research of other related integrated courses.

SpyGlass application for duodenoscope working channel inspection: Impact on the microbiological surveillance

BACKGROUND Patient-ready duodenoscopes were designed with an assumed contamination rate of less than 0.4%;however,it has been reported that 5.4%of clinically used duodenoscopes remain contaminated with viable high-concern organisms despite following the manufacturer’s instructions.Visual inspection of working channels has been proposed as a quality control measure for endoscope reprocessing.There are few studies related to this issue.AIM To investigate the types,severity rate,and locations of abnormal visual inspection findings inside patient-ready duodenoscopes and their microbiological significance.METHODS Visual inspections of channels were performed in 19 patient-ready duodenoscopes using the SpyGlass visualization system in two endoscopy units of tertiary care teaching hospitals(Tri-Service General Hospital and National Taiwan University Hospital)in Taiwan.Inspections were recorded and reviewed to evaluate the presence of channel scratches,buckling,stains,debris,and fluids.These findings were used to analyze the relevance of microbiological surveillance.RESULTS Seventy-two abnormal visual inspection findings in the 19 duodenoscopes were found,including scratches(n=10,52.6%),buckling(n=15,78.9%),stains(n=14,73.7%),debris(n=14,73.7%),and fluids(n=6,31.6%).Duodenoscopes>12 mo old had a significantly higher number of abnormal visual inspection findings than those≤12 mo old(46 findings vs 26 findings,P<0.001).Multivariable regression analyses demonstrated that the bending section had a significantly higher risk of being scratched,buckled,and stained,and accumulating debris than the insertion tube.Debris and fluids showed a significant positive correlation with microbiological contamination(P<0.05).There was no significant positive Spearman’s correlation coefficient between negative bacterial cultures and debris,between that and fluids,and the concomitance of debris and fluids.This result demonstrated that the presence of fluid and debris was associated with positive cultures,but not negative cultures.Further multivariate analysis demonstrated that fluids,but not debris,is an independent factor for bacterial culture positivity.CONCLUSION In patient-ready duodenoscopes,scratches,buckling,stains,debris,and fluids inside the working channel are common,which increase the microbiological contamination susceptibility.The SpyGlass visualization system may be recommended to identify suboptimal reprocessing.

An integrative review of the influence of job strain and coping on nurses'work performance:Understanding the gaps in oncology nursing research

Nursing is known to be a stressful profession that can lead to physical and psychological health issues and behavioural problems.In oncology,workload among nurses is believed to be increasing in conjunction with rapidly increasing numbers of patients with cancer and staff shortages worldwide,therefore it is essential to sustain a quality oncology nurse workforce.Numerous studies have presented evidence on job strain,effects of coping strategies,and nurses'work performance within healthcare settings,but few have focused on oncology settings and none of these on nurses working in Saudi Arabia.The purpose of this review was to summarize empirical and theoretical evidence concerning job-related stressors in nurses,particularly oncology nurses,and the interrelationships among job strain,coping strategies,and work performance in this population.Search strategies identified studies published on studies in peer-reviewed journals from 2004 to 2016.Twenty-five nursing studies were found examining the relationships among the concepts of interest.Common job-related stressors among oncology nurses were high job demands,dealing with death/dying,lack of job control,and interpersonal conflicts at work.Job strain was found to be significantly linked to coping strategies,and negatively associated with work performance among nurses in general.There is no existing empirical evidence to support the relationship between coping strategies and work performance among oncology nurses.The present evidence is limited,and a considerable amount of research is required in the future to expand the oncology nursing literature.Research is needed to investigate job-related stressors and their effects on oncology nurses.

NEW PRINCIPLES OF WORK AND ENERGY AS WELLAS POWER AND ENERGY RATE FORCONTINUUM FIELD THEORIES

New principles of work and energy as well as power and energy rate with cross terms for polar and nonlocal polar continuum field theories were presented and from them all corresponding equations of motion and boundary conditions as well as complete equations of energy and energy rate with the help of generalized Piola's theorems were naturally derived in all and without any additional requirement. Finally, some new balance laws of energy and energy rate for generalized continuum mechanics were established. The new principles of work and energy as well as power and energy rate with cross terms presented in this paper are believed to be new and they have corrected the incompleteness of all existing corresponding principles and laws without cross terms in literatures of generalized continuum field theories.

Theoretical and numerical analysis of coal dust separated by centrifugal force for working and heading faces

In order to meet engineering needs of Chinese underground coal mines,a new dust-collecting fan,a device of dust separated by centrifugal force in driven cyclone passageway(DCCP)was designed.In centrifugal dust removal section(CDRS)of DCCP,a general equation is derived from the principle of force equilibrium.According to CDRS structure parameters and fan running parameters,the general equation is simplified,and the simplest equation is calculated numerically by MATLAB.The calculation results illustrate that increasing quantity of air current is against dust removal,but it is beneficial to dust removal by increasing the radius of driven spiral blade and increasing the particle diameter of coal dust.The conclusions show that the dust-collecting structure parameters coupled with the fan running parameters is a novel optimization approach to dust-collection fan for working and heading faces,which is especially suitable for Chinese underground mines.

Establishment of Master Cell Stock and Working Cell Bank of MDCK Lines and Selection and Evaluation of the Lines as Candidate Viral Substrates for Approval Production of Combinational Canine Attenuated-live Virus Vaccines

Under the prerequisite that the incidence of cancer or tumor in negative-control nude mice inoculated subcutaneously with primary feline or canine kidney cell cultures purified in vitro at passage 3 was 0 (0/22) and 0 (0/10), respectively. The incidence of the progressively-growing malignant tumor(MT) in positive-control nude mice inoculated subcutaneously with Hela cell cultures of KB, X, or NM20/X strain was 10/ 10, 25/25 and 5/51, respectively. The results showed that the incidence of tumor in nude mice with di-and hy-perploid YB strain of MDCK cell during 17 - 23 passages, with hyper- and hypoploid KA strain of MDCK cell during 6-8 passages, with hypoploid WB strain of MDCK cell on passage 6, with hyper-and hypoploid H strain of MDCK cell during 8-24 passages was 2/24, 6/10, 5/10 and 10/15, respectively. The chromosomal analysis results showed that the ratio of difference in the rate of modal chromosome number between high(mcs + n) and lowest (mcs)passages was not more than 5 - 15% and the structure aberrations was generally 0 -3 %. These results proved that the genetic characteristics of chromosomal number of cell lines determines their tumorigenicity, but it is species-specific. MDCK line has tumorigenicity no matter what its chromosome kary-otype is, at least it has very low tumorigenicity even when its modal chromosome number is hypoploid. It is thus evident that MDCK cell of WB or H strain can be approved as substrate for the preparation of attenuated viral vaccines, but MDCK cell of YB or KA strain can not be approved as substrate for the preparation of attenuated viral vaccines.

Effect of working parameters on performance characteristics of hydrostatic turntable by using FSI-thermal model

Effects of working parameters on performance characteristics of hydrostatic turntable are researched by applying the fluid-structure-thermal coupled model.Fluid-structure interaction(FSI)technique and computational fluid dynamics(CFD)method are both employed by this new model,and thermal effects are also considered.Hydrostatic turntable systems with a series of oil supply pressures,various oil recess depth and several surface roughness parameters are studied.Performance parameters,such as turntable displacement,system flow rate,temperature rise of lubrication,stiffness and damping coefficients,are derived from different working parameters(rotational speed of turntable and exerted external load)of the hydrostatic turntable.Numerical results obtained from this FSI-thermal model are presented and discussed,and theoretical predictions are in good agreement with the experimental data.Therefore,this developed model is a very useful tool for studying hydrostatic turntables.The calculation results show that in order to obtain better performance,a rational selection of the design parameters is essential.

The value of group work in developing oral skills for Chinese learners of EFL

Researchers have demonstrated that group work is an effective way to improve students' oral English and should be widely used in speaking classes because it can not only create a relaxed atmosphere with a sense of security to reduce students' anxiety,but also provide them with as many opportunities as possible to practice speaking English.In this paper,the author attempts to demonstrate the benefits of group work in enhancing oral skills for Chinese learners of EFL by relating the literature review of group work to his own language learning experiences which will be presented as a reflection,comparison and evaluation of the literature and the findings of the studies.

Design and optimization of fluid lubricated bearings operated with extreme working performances——a comprehensive review

Fluid lubricated bearings have been widely adopted as support components for high-end equipment in metrology,semiconductor devices,aviation,strategic defense,ultraprecision manufacturing,medical treatment,and power generation.In all these applications,the equipment must deliver extreme working performances such as ultraprecise movement,ultrahigh rotation speed,ultraheavy bearing loads,ultrahigh environmental temperatures,strong radiation resistance,and high vacuum operation,which have challenged the design and optimization of reliable fluid lubricated bearings.Breakthrough of any related bottlenecks will promote the development course of high-end equipment.To promote the advancement of high-end equipment,this paper reviews the design and optimization of fluid lubricated bearings operated at typical extreme working performances,targeting the realization of extreme working performances,current challenges and solutions,underlying deficiencies,and promising developmental directions.This paper can guide the selection of suitable fluid lubricated bearings and optimize their structures to meet their required working performances.

Determining the rational layout parameters of the lateral high drainage roadway serving for two adjacent working faces

To determine the rational layout parameters of the lateral high drainage roadway(LHDR) serving for two adjacent working faces, a mechanical model of the LHDR under mining influence was established, and the overburden fissure, mining-induced stress distribution rules were analyzed. First, the development characteristics of mining-induced overburden fissure and the stress distribution law of the upper section of the working face were analyzed. Second, by analyzing the distribution law of vertical stress at different layers, the lateral distance of the LHDR was determined as 25 m. Third, by analyzing the surrounding rock deformation effect, stress distribution law, and overburden fissure distribution law of the LHDR at the heights of 20, 25, and 30 m away from the roof, the rational horizon of the LHDR was determined to be 25 m. Finally, an example of a LHDR located 25 m above the roof of the No. 2 coal seam and 25 m away from the No. 2-603 working face was presented. Results show that when the No. 2-603 coalface is being mined, the surrounding rocks lag 80 m or even further and the working face tends to be stable. The relative deformations of the roof and floor of the roadway and both of its walls were 583 and 450 mm,respectively. The reduction rate of the roadway section was 21.52%–25.32%. The section of the roadway was sufficient to extract the pressure relief gas in the overburden of the No. 2-605 working face. The average gas concentration and the pure volume at the branch pipeline were 24.8% and 22.3 m^3/min,respectively, showing that the position of high-level boreholes was reasonable.

Evaluation of the Living Conditions and Health Perceptions of Waste Electrical and Electronic Equipment Handlers in the Informal Sector in Dakar

Electrical and electronic devices are becoming an increasingly important part of our society. In Africa, and in Senegal in particular, the handling and management of electronic and electrical equipment (EEE) that has reached the end of its life is mainly informal. This professional environment is characterized by the disintegration of the sector and the social heterogeneity that can be found there. The objective of this study is to assess the standard of living of electrical and electronic equipment waste handlers in the Dakar region, as well as their perception of their health. A survey was used to obtain information on sociodemographic background, living arrangements, perception of health status, and good practices to be implemented in case of work-related health problems. Life style, perception of general health and health problems were ranged as excellent, very good, good, average and poor. Informal recyclers in the Dakar region lived mainly in rooms and buildings as tenants (49.1%), or in family homes (48.4%) before starting this activity, and 51.2% continue to live in rooms and buildings as tenants compared to 41.4% who still live in a family home. The perception of health status ranged from poor to excellent, and 4.9% believe that they are limited in work due to a disability or health problem. Informal work is a heterogeneous phenomenon that makes research and policymaking particularly complex. There are several external factors within informal WEEE re-cyclers that can cause health problems or functional disability. However, the living conditions and the perception they have of their state of health are contradictory to the working conditions and the social environment to which they belong. A biomedical approach would consolidate these achievements by confirming or invalidating them.