Tools and Appliances for live working on UHVDC passed acceptance

The research and development in UHVDC ±800-kV line maintenance and live-line tools and appliances was the key scientific and technological

Repair Effect of Hot Work Tool Steel by Laser-Melting Process

Both wear and crack due to heat checking in hot work tool steel are major failure modes.It is desirable to find amethod to lengthen the tool life while reducing manufacturing cost.This paper suggests a method to improve toollife for hot work tool steel(SKD6)with crack by laser-melting process.The method has been evaluated using theimpact and fatigue test results.It is demonstrated that a repair of the crack by a laser-melting process is effectivefor life extension of the damaged tool.

The Stress Distribution and Thermal Behavior of TiBN and TiBN TiN Coatings in Milling AISI H13 Work Tool Steel

The FEM model of TiBN and TiBN/TiN coated cutting tool in milling of H13 steel w as developed. Process variables such as temperature and stress in the coating l ayer as well as in the substrate were analyzed. The efficacy of the present FEM analysis was verified by conducting controlled milling experiments on AISI H13 t o collect the relevant tool life and force data.The results show that the stress in a coated tool can significantly be reduced compared to an uncoated cutting t ool,possibly due to surface coatings improving the tribological properties of cu tting tools.Coatings with good thermal properties also help to improve the therm al behavior of cutting tool.

FLOW STRESS MODEL FOR HARD MACHINING OF AISI H13 WORK TOOL STEEL

An approach is presented to characterize the stress response of workpiece in hard machining, accounted for the effect of the initial workpiece hardness, temperature, strain and strain rate on flow stress. AISI H13 work tool steel was chosen to verify this methodology. The proposed flow stress model demonstrates a good agreement with data collected from published experiments. Therefore, the proposed model can be used to predict the corresponding flow stress-strain response of AISI H13 work tool steel with variation of the initial workpiece hardness in hard machining.

FEM simulation and experimental verification of temperature field and phase transformation in deep cryogenic treatment

Combining with the low temperature material properties and the boiling heat transfer coefficient of specimen immersed in the liquid nitrogen, a numerical model based on metallo-thermo-mechanical couple theory was established to reproduce the deep cryogenic treatment （DCT） process of a newly developed cold work die steel Cr8Mo2SiV （SDC99）. Moreover, an experimental setup for rapid temperature measurement was designed to validate the simulation results. The investigation suggests that the differences in temperature and cooling rate between the surface and core of specimen are very significant. However, it should be emphasized that the acute temperature and cooling rate changes during DCT are mainly concentrated on the specimen surface region about 1/3 of the sample thickness. Subjected to DCT, the retained austenite of quenched specimen continues to transform to martensite and finally its phase volume fraction reduces to 2.3%. The predicted results are coincident well with the experimental data, which demonstrates that the numerical model employed in this study can accurately capture the variation characteristics of temperature and microstructure fields during DCT and provide a theoretical guidance for making the reasonable DCT procedure.

Effect of Niobium on Microstructure of Cast AISI H13 Hot Work Tool Steel

The effect of niobium addition on the microstructure of cast AISI H13 hot work tool steel was evaluated by using EDX analyzer attached to the scanning electron microscope. The volume percent of eutectic area and eutectic cell size and also volume percent of different carbides of new steel, which is heat treated under different conditions, are also determined. The results show that the a niobium addition modifies the cast structure of Nb-alloyed hot work tool steel, and reduces the size and volume of eutectic cells, and increases the maximum hardness of the steel.

Effect of Heat Treatment on Microstructure of Modified Cast AISI D3 Cold Work Tool Steel

The effects of heat treatment on the microstructure of modified cast high chromium high carbon AISI D3 steel were studied. The modified AISI D3 steel was developed by replacing part of chromium with niobium and titanium, in which chromium carbide was partially replaced with MC carbides. The cast samples produced by investment casting were heat treated under different conditions. The microstructures of the samples were studied by optical microscope and scanning electron microscope equipped with EDS analyzer. To determine the optimized homogenizing process, the effects of homogenizing treatment on the microstructure and the morphology of carbides were also studied. The results show that the MC carbides are not changed in shape and amounts during high temperature homogenizing, whereas the M3C carbides are reduced in amount and become semiglobular in shape, and the homogeneity of microstructure is improved.

Fatigue-creep interaction based on continuum damage mechanics for AISI H13 hot work tool steel at elevated temperatures

AISI H13 （4Cr5MoSiV1） is one of the commonly used materials for extrusion tool, and it suffers from fatigue-creep damage during the hot extrusion process. Stress-controlled fatigue and creep-fatigue interaction tests were carried out at 500℃ to investigate its damage evolution. The accumulated plastic strain was selected to define the damage variable due to its clear physical meaning. A new fatigue-creep interaction damage model was proposed on the basis of continuum damage mechanics. A new equivalent impulse density for fatigue-creep tests was proposed to incorporate the holding time effect by transforming creep impulse density into fatigue impulse density. The experimental results indicated that the damage model is able to describe the damage evolution under these working conditions.

Phase Transformation of a Cold Work Tool Steel during Tempering

The hardness and microstructure evolution of a 8% Cr cold work tool steel during tempering for 40 h were investigated. Transmission electron microscope examinations showed that M_3C carbides precipitated from supersaturated martensite after tempering at 350 ℃. When the tempering temperature was higher than 520 ℃,the M_（23）C_6 carbides precipitated to substitute for M_3C carbides. After ageing at the temperature of 520 ℃ for 40 h,it was observed that very fine and dense secondary Mo_2C precipitates were precipitated. Thus,it can be concluded that the early stage of Mo_2C-carbide precipitation is like to be Gunier-Preston（ G-P） zone formed by [Mo-C] segregation group which is responsible for the secondary hardening peak at 520 ℃. Overageing at 700 ℃ resulted in recovery of martensitic microstructure and precipitation of M_（23）C_6 carbides.When ageing at 700 ℃ for more than 20 h,recrystallization occurred,which resulted in a change of the matrix morphology from martensitic plates to equiaxed ferrite. It was noticed that the size of recrystallized grain / subgrain was very fine,which was attributed to the pinning effect of M_（23）C_6 precipitates.