We reported the development of a Ф100 cm growth apparatus for skull melting growth of yttria-stabilized cubic zirconia(YSZ) crystals and more than 1000 kg crystals have been grown in the furnace each time.The growth ...We reported the development of a Ф100 cm growth apparatus for skull melting growth of yttria-stabilized cubic zirconia(YSZ) crystals and more than 1000 kg crystals have been grown in the furnace each time.The growth conditions were optimized and the structure of the as-grown crystals was characterized by X-ray diffraction.The transmittance of 15 mol.% yttria-stabilized cubic zirconia crystal was nearly 80% in the range of 400–1600 nm.The refractive indices were measured and fitted the Sellmeier equation whi...展开更多
Sintered plates of 5mol% yttria-partially-stabilized zirconia have been implanted at room temperature with 5 ×1015to 2 ×1017 Fe+ ions/cm2 at 140 KeV. Electrical measurement, Rutherford backscattering spec-tr...Sintered plates of 5mol% yttria-partially-stabilized zirconia have been implanted at room temperature with 5 ×1015to 2 ×1017 Fe+ ions/cm2 at 140 KeV. Electrical measurement, Rutherford backscattering spec-troscopy(RBS), Raman spectroscopy and X-ray photoelec-tron spectroscopy(XPS) have been used to study the surface electrical properties and the structure of the implanted layer before and after thermal annealing treatment in N2.展开更多
Alumina-doped yttria-stabilized zirconia (ADYSZ) nanopowders were prepared by microwave-assisted peroxyl-complex coprecipitation (MAPCC) using ZrOCl2·8H2O, Y2O3 and AlCl3·6H2O as starting materials, NH3·...Alumina-doped yttria-stabilized zirconia (ADYSZ) nanopowders were prepared by microwave-assisted peroxyl-complex coprecipitation (MAPCC) using ZrOCl2·8H2O, Y2O3 and AlCl3·6H2O as starting materials, NH3·H2O as precipitant and H2O2 as complexant. The effects of adding H2O2 and microwave drying on the preparation and properties of ADYSZ were investigated. The precursors and nanopowders were studied by EDX, XRD, SEM and TEM techniques. The results show that the uniformity of component distribution within ADYSZ nanopowders is improved by adding appropriate dosage of H2O2. Complexing reaction between H2O2 and Zr4+ ion restrains the hydrolyzation and precipitation of Zr4+ ion. With the addition of H2O2, Al3+, Y3+ and Zr4+ ions can be precipitated synchronously in a relatively narrow range of pH value. H2O2 also improves the filterability of the wet precipitate. The highly hydrophilic precipitates can be quickly and effectively separated from aqueous solution. During microwave drying process, the moisture of wet precursors is selectively heated. Quick expansion of steam vapor within the wet colloidal particles causes the aggregations burst into numerous tiny lumps. Compared with oven drying, microwave drying can not only shorten drying time but also reduce aggregation intensity of the resultant ADYSZ nanopowders.展开更多
C1 chemistry based on synthesis gas, methane, and carbon dioxide offers many routes to industrial chemicals. The reactions related to the synthesis of gas can be classified into direct and indirect approach for making...C1 chemistry based on synthesis gas, methane, and carbon dioxide offers many routes to industrial chemicals. The reactions related to the synthesis of gas can be classified into direct and indirect approach for making such products, such as acetic acid, dimethyl ether, and alcohol. Catalytic syngas processing is currently done at high temperatures and pressures, conditions that could be unfavorable for the life of the catalyst. Another issue of C1 chemistry is related to the methane-initiated process. It has been known that direct methane conversions are still suffering from low yields and selectivity of products resulting in unprofitable ways to produce products, such as higher hydrocarbons, methanol, and so on. However, many experts and researchers are still trying to find the best method to overcome these barriers, for example, by finding the best catalyst to reduce the high-energy barrier of the reactions and conduct only selective catalyst-surface reactions. The appli- cation of Yttria-Stabilized Zirconia （YSZ） and its combination with other metals for catalyzing purposes are increasing. The existence of an interesting site that acts as oxygen store could be the main reason for it. Moreover, formation of intermediate species on the surface of YSZ also contributes significantly in increasing the production of some specific products. Understanding the phenomena happening inside could be necessary. In this article, the use of YSZ for some C1 chemistry reactions was discussed and reviewed.展开更多
We have applied Conductive Atomic Force Microscopy (CAFM) to study the microscopic mechanism of resistive switching in the ultrathin (3 - 5 nm) yttria stabilized zirconia (YSZ) films. Using CAFM, we were able to trace...We have applied Conductive Atomic Force Microscopy (CAFM) to study the microscopic mechanism of resistive switching in the ultrathin (3 - 5 nm) yttria stabilized zirconia (YSZ) films. Using CAFM, we were able to trace the growth of the individual conductive filaments, which are considered now to be responsible for the resistive switching effect in the transition metal oxides. The growth of the filaments has been proven to be initiated by the defects in the film material including the ones, which are the concentrators of the electric field, in particular, by the roughness (hillocks) of the film/substrate interface. The electron transport via individual filaments has been studied. Besides the butterfly-type hysteresis in the current-voltage (I-V) curves of the probe- to-sample contact typical for the bipolar resistive switching, we have observed the I-V curves with resonant peaks attributed to the resonant electron tunneling via the localized electron states in the filaments.展开更多
Nanostructured yttria partially stabilized zirconia(YSZ) coatings were prepared by atmospheric plasma spraying(APS) using the conglomeration made by zirconia nanoparticle as the raw materials.The measurement methods,w...Nanostructured yttria partially stabilized zirconia(YSZ) coatings were prepared by atmospheric plasma spraying(APS) using the conglomeration made by zirconia nanoparticle as the raw materials.The measurement methods,which consisted of scanning electron microscopy(SEM),transmission electron microscopy(TEM) and thermal cycling behavior,were used to character the morphology,composition and thermal oxidation behavior of the powder and the coatings.From the results,it was shown that the YSZ coating was the laminar structure,and the elements distribution in the bond and top coat were well-proportioned.The YSZ coatings were composed of fine grains with size ranging from 30 to 110 nm.The laminar layers with columnar grains were surrounded with unmelted parts of the nanostructured powder and some equiaxed grains.In the as-sprayed nanostructured zirconia coatings,there existed pores that were less than 1 μm.The cracks were observed on some of the crystal border.The cyclic oxidation experiment showed that the nanostructured coating had longer thermal cycling lifetime to exhibit the promising thermal cyclic oxidation resistance.The failure of the nanostructured TBC was similar to the failure of conventional APS TBC.展开更多
The yttria-stabilized zirconia(YSZ)film was fabricated on the La 0.8 Sr 0.2 MnO 3(LSM)substrate by electrochemical deposition.The effects of electrochemical deposition conditions on morphological structure of Y(OH) 3 ...The yttria-stabilized zirconia(YSZ)film was fabricated on the La 0.8 Sr 0.2 MnO 3(LSM)substrate by electrochemical deposition.The effects of electrochemical deposition conditions on morphological structure of Y(OH) 3 -Zr(OH) 4 film were studied.The optimal conditions for depositing homogeneous and compact hydroxide film were obtained.The experimental results show that the density of the electrophoretic deposition film is increased remarkably if electrochemical deposition is applied to fill in the pores.展开更多
Thermal barrier coatings （TBCs） with Y2O3-stabilized ZrO2 （YSZ） top coat play a very important role in advanced turbine blades by considerably increasing the engine efficiency and improving the performance of high...Thermal barrier coatings （TBCs） with Y2O3-stabilized ZrO2 （YSZ） top coat play a very important role in advanced turbine blades by considerably increasing the engine efficiency and improving the performance of highly loaded blades. However, at high temperatures, environment factors result in the failure of TBCs. The influence of calcium-magnesium-alumino-silicate （CMAS） is one of environment factors. Although thermo-physical effect is being paid attention to, the thermo-chemical reaction becomes the hot-spot in the research area of TBCs affected by CMAS. In this paper, traditional twolayered structured TBCs were prepared by electron beam physical vapor deposition （EB- PVD） as the object of study. TBCs coated with CMAS were heated at 1240℃ for 3 h. Additionally, 15 wt.% simulated molten CMAS powder and YSZ powder were mixed and heated at 1240℃ or 1350℃ for 48 h. SEM and EDS were adopted to detect morphology and elements distribution. According to XRD and TEM results, it was revealed that CMAS react with YSZ at high temperature and form ZrSiO4, Ca0.2Zr0.8O1.8 and Ca0.15Zr0.85O1.85 after reaction, as a result, leading to the failure of TBCs and decreasing the TBC lifetime.展开更多
基金supported by the National Natural Science Foundation of China (50672111)Shanghai Science and Technology Committee (08520513100)
文摘We reported the development of a Ф100 cm growth apparatus for skull melting growth of yttria-stabilized cubic zirconia(YSZ) crystals and more than 1000 kg crystals have been grown in the furnace each time.The growth conditions were optimized and the structure of the as-grown crystals was characterized by X-ray diffraction.The transmittance of 15 mol.% yttria-stabilized cubic zirconia crystal was nearly 80% in the range of 400–1600 nm.The refractive indices were measured and fitted the Sellmeier equation whi...
文摘Sintered plates of 5mol% yttria-partially-stabilized zirconia have been implanted at room temperature with 5 ×1015to 2 ×1017 Fe+ ions/cm2 at 140 KeV. Electrical measurement, Rutherford backscattering spec-troscopy(RBS), Raman spectroscopy and X-ray photoelec-tron spectroscopy(XPS) have been used to study the surface electrical properties and the structure of the implanted layer before and after thermal annealing treatment in N2.
基金Project(043182311) supported by the Key Program of Scientific and Technical Research of Tianjin
文摘Alumina-doped yttria-stabilized zirconia (ADYSZ) nanopowders were prepared by microwave-assisted peroxyl-complex coprecipitation (MAPCC) using ZrOCl2·8H2O, Y2O3 and AlCl3·6H2O as starting materials, NH3·H2O as precipitant and H2O2 as complexant. The effects of adding H2O2 and microwave drying on the preparation and properties of ADYSZ were investigated. The precursors and nanopowders were studied by EDX, XRD, SEM and TEM techniques. The results show that the uniformity of component distribution within ADYSZ nanopowders is improved by adding appropriate dosage of H2O2. Complexing reaction between H2O2 and Zr4+ ion restrains the hydrolyzation and precipitation of Zr4+ ion. With the addition of H2O2, Al3+, Y3+ and Zr4+ ions can be precipitated synchronously in a relatively narrow range of pH value. H2O2 also improves the filterability of the wet precipitate. The highly hydrophilic precipitates can be quickly and effectively separated from aqueous solution. During microwave drying process, the moisture of wet precursors is selectively heated. Quick expansion of steam vapor within the wet colloidal particles causes the aggregations burst into numerous tiny lumps. Compared with oven drying, microwave drying can not only shorten drying time but also reduce aggregation intensity of the resultant ADYSZ nanopowders.
基金Project supported by the Global R&D Program of the Korea Foundation for International Cooperation of Science and Technology (KICOS)
文摘C1 chemistry based on synthesis gas, methane, and carbon dioxide offers many routes to industrial chemicals. The reactions related to the synthesis of gas can be classified into direct and indirect approach for making such products, such as acetic acid, dimethyl ether, and alcohol. Catalytic syngas processing is currently done at high temperatures and pressures, conditions that could be unfavorable for the life of the catalyst. Another issue of C1 chemistry is related to the methane-initiated process. It has been known that direct methane conversions are still suffering from low yields and selectivity of products resulting in unprofitable ways to produce products, such as higher hydrocarbons, methanol, and so on. However, many experts and researchers are still trying to find the best method to overcome these barriers, for example, by finding the best catalyst to reduce the high-energy barrier of the reactions and conduct only selective catalyst-surface reactions. The appli- cation of Yttria-Stabilized Zirconia （YSZ） and its combination with other metals for catalyzing purposes are increasing. The existence of an interesting site that acts as oxygen store could be the main reason for it. Moreover, formation of intermediate species on the surface of YSZ also contributes significantly in increasing the production of some specific products. Understanding the phenomena happening inside could be necessary. In this article, the use of YSZ for some C1 chemistry reactions was discussed and reviewed.
文摘We have applied Conductive Atomic Force Microscopy (CAFM) to study the microscopic mechanism of resistive switching in the ultrathin (3 - 5 nm) yttria stabilized zirconia (YSZ) films. Using CAFM, we were able to trace the growth of the individual conductive filaments, which are considered now to be responsible for the resistive switching effect in the transition metal oxides. The growth of the filaments has been proven to be initiated by the defects in the film material including the ones, which are the concentrators of the electric field, in particular, by the roughness (hillocks) of the film/substrate interface. The electron transport via individual filaments has been studied. Besides the butterfly-type hysteresis in the current-voltage (I-V) curves of the probe- to-sample contact typical for the bipolar resistive switching, we have observed the I-V curves with resonant peaks attributed to the resonant electron tunneling via the localized electron states in the filaments.
基金Project supported by the National Defense Basic Scientific Research Program of China (K0504030206)
文摘Nanostructured yttria partially stabilized zirconia(YSZ) coatings were prepared by atmospheric plasma spraying(APS) using the conglomeration made by zirconia nanoparticle as the raw materials.The measurement methods,which consisted of scanning electron microscopy(SEM),transmission electron microscopy(TEM) and thermal cycling behavior,were used to character the morphology,composition and thermal oxidation behavior of the powder and the coatings.From the results,it was shown that the YSZ coating was the laminar structure,and the elements distribution in the bond and top coat were well-proportioned.The YSZ coatings were composed of fine grains with size ranging from 30 to 110 nm.The laminar layers with columnar grains were surrounded with unmelted parts of the nanostructured powder and some equiaxed grains.In the as-sprayed nanostructured zirconia coatings,there existed pores that were less than 1 μm.The cracks were observed on some of the crystal border.The cyclic oxidation experiment showed that the nanostructured coating had longer thermal cycling lifetime to exhibit the promising thermal cyclic oxidation resistance.The failure of the nanostructured TBC was similar to the failure of conventional APS TBC.
文摘The yttria-stabilized zirconia(YSZ)film was fabricated on the La 0.8 Sr 0.2 MnO 3(LSM)substrate by electrochemical deposition.The effects of electrochemical deposition conditions on morphological structure of Y(OH) 3 -Zr(OH) 4 film were studied.The optimal conditions for depositing homogeneous and compact hydroxide film were obtained.The experimental results show that the density of the electrophoretic deposition film is increased remarkably if electrochemical deposition is applied to fill in the pores.
文摘Thermal barrier coatings （TBCs） with Y2O3-stabilized ZrO2 （YSZ） top coat play a very important role in advanced turbine blades by considerably increasing the engine efficiency and improving the performance of highly loaded blades. However, at high temperatures, environment factors result in the failure of TBCs. The influence of calcium-magnesium-alumino-silicate （CMAS） is one of environment factors. Although thermo-physical effect is being paid attention to, the thermo-chemical reaction becomes the hot-spot in the research area of TBCs affected by CMAS. In this paper, traditional twolayered structured TBCs were prepared by electron beam physical vapor deposition （EB- PVD） as the object of study. TBCs coated with CMAS were heated at 1240℃ for 3 h. Additionally, 15 wt.% simulated molten CMAS powder and YSZ powder were mixed and heated at 1240℃ or 1350℃ for 48 h. SEM and EDS were adopted to detect morphology and elements distribution. According to XRD and TEM results, it was revealed that CMAS react with YSZ at high temperature and form ZrSiO4, Ca0.2Zr0.8O1.8 and Ca0.15Zr0.85O1.85 after reaction, as a result, leading to the failure of TBCs and decreasing the TBC lifetime.
