Investigation of the Surface State of Zeolite HZSM-5 Pretreated with Toluene by Using Fast Atom Bombardment Mass Spectrometry (FABMS)

Toluene pretreatment caused many activated toluene species existing on the surface of zeolite HZSM-5, by which the activity of sample was increased. Moreover, variation in the surface Si+/Al+ ratio of HZSM-5 was sensitively detected by FABMS.

HZSM-5 zeolites undergoing the high-temperature process for boosting the bimolecular reaction in n-heptane catalytic cracking

High-temperature treatment is key to the preparation of zeolite catalysts.Herein,the effects of hightemperature treatment on the property and performance of HZSM-5 zeolites were studied in this work.X-Ray diffraction,N2physisorption,27Al magic angle spinning nuclear magnetic resonance(MAS NMR),and temperature-programmed desorption of ammonia results indicated that the hightemperature treatment at 650℃ hardly affected the inherent crystal and texture of HZSM-5zeolites but facilitated the conversion of framework Al to extra-framework Al,reducing the acid site and enhancing the acid strength.Moreover,the high-temperature treatment improved the performance of HZSM-5 zeolites in n-heptane catalytic cracking,promoting the conversion and light olefins yield while inhibiting coke formation.Based on the kinetic and mechanism analysis,the improvement of HZSM-5 performance caused by high-temperature treatment has been attributed to the formation of extra-framework Al,which enhanced the acid strength,facilitated the bimolecular reaction,and promoted the entropy change to overcome a higher energy barrier in n-heptane catalytic cracking.

CaO/HZSM-5复合催化剂调控水稻秸秆和PVC共热解产物的协同作用研究

生物质与废旧塑料共热解是实现两者资源化利用的潜在技术之一,不仅能制备高附加值的富烃生物油,还可实现废弃物的洁净资源化利用,减轻环境污染。然而,产物的复杂性限制了共热解技术的进一步应用。本研究以农作废弃物水稻秸秆(RS)和聚氯乙烯塑料(PVC)为研究对象,采用热重-质谱联用仪(TG-MS)和热裂解-气相色谱/质谱联用仪(Py-GC/MS)研究两者单独及共热解特性,并考察CaO和HZSM-5复合催化剂对热解产物的协同调控规律。结果表明,PVC和RS在共热解过程中具有相互作用,促进了芳烃化合物的产生。生物油中烃类化合物的相对含量高达66.78%。其中,芳烃的相对含量达到64.17%。相较于RS单独热解,共热解焦油组分中含氧化合物的含量下降62.05%,有效提高了生物油的氧化稳定性。CaO/HZSM-5复合催化剂相较于CaO、HZSM-5单独催化剂,热解产物油中C_(4)−C_(10)烃类化合物的相对含量分别增加2.81%、5.06%,表现出更好的轻质芳烃选择性。在CaO/HZSM-5复合催化剂协同作用下,生物油中单环芳烃的相对含量为34.34%,大于理论计算值33.03%。而多环芳烃的相对含量为28.21%,小于理论计算值31.22%,表现出较好的单环芳烃选择性。此外,CaO/HZSM-5复合催化剂促进大量氯元素以CaCl_(2)等氯化物的形式固定在半焦中,显著降低了Cl元素的气相释放。

Pervaporation performance and characterization of hydrophilic ZSM-5 zeolite membranes for high inorganic acid and inorganic salts

The hydrophilic ZSM-5 zeolite membranes are applied to separate the inorganic acid solutions and inorganic acid/inorganic salt mixtures by pervaporation,and the membrane presents good stability,dehydration,and desalination performance.Influences of inorganic acid type(H_(2)SO_(4),H_(3)PO_(4),HNO_(3),and HCl),H_(2)SO_(4)concentration(1-6 mol·L^(-1)),test temperature(60-90℃)and inorganic acid/inorganic salt type(2 mol·L^(-1)H_(2)SO_(4)and sulfate,2 mol·L^(-1)H3PO4 and phosphate)on the pervaporation performance are investigated in this work.Either for concentrating 3%(mass)H_(2)SO_(4)solution or consecutive dehydrating 20%(mass)H_(2)SO_(4)solution,the hydrophilic ZSM-5 zeolite membrane has a good dehydration performance and stability.Even though the H_(2)SO_(4)concentration and test temperature are increased to 6 M and 90℃,only H_(2)O molecules could pass through the membrane and pH value of the permeation is kept neutral.Besides,the membrane has good dehydration and desalination performance for H_(2)SO_(4)/sulfates and H_(3)PO_(4)/phosphate mixtures,and the rejection of natrium salt,molysite,and magnesium is almost 100%.

Effects of Light Rare Earth on Acidity and Catalytic Performance of HZSM-5 Zeolite for Catalytic Cracking of Butane to Light Olefins

The effects of rare earth（RE）on the structure,acidity,and catalytic performance of HZSM-5 zeolite were investigated.A series of RE/HZSM-5 catalysts,containing 7.54% RE（RE=La,Ce,Pr,Nd,Sm,Eu or Gd）,were prepared by the impregnation of the ZSM-5 type zeolites（Si/Al=64：1）with the corresponding RE nitrate aqueous solutions.The catalysts were characterized by means of FT-IR,UV-Vis,NH3-TPD,and IR spectroscopy of adsorbed pyridine.The catalytic performances of the RE/HZSM-5 for the catalytic cracking of mixed butane to light olefins were also measured with a fixed bed microreactor.The results revealed that the addition of light rare earth metal on the HZSM-5 catalyst greatly enhanced the selectivity to olefins,especially to propylene,thus increasing the total yield of olefins in the catalytic cracking of butane.Among the RE-modified HZSM-5 samples,Ce/HZSM-5 gave the highest yield of total olefins,and Nd/HZSM-5 gave the highest yield of propene at a reaction temperature of 600℃.The presence of rare earth metal on the HZSM-5 sample,not only modified the acidic properties of HZSM-5 including the amount of acid sites and acid type,that is,the ratio of L/B（Lewis acid/Brnsted acid）,but also altered the basic properties of it,which in turn promoted the catalytic performance of HZSM-5 for the catalytic cracking of butane.

Effects of Calcination Temperature on the Acidity and Catalytic Performances of HZSM-5 Zeolite Catalysts for the Catalytic Cracking of n-Butane

The acidic modulations of a series of HZSM-5 catalysts were successfully made by calcination at different treatment temperatures, i.e. 500, 600, 650, 700 and 800 ℃, respectively. The results indicated that the total acid amounts, their density and the amount of B-type acid of HZSM-5 catalysts rapidly decreased, while the amounts of L-type acid had almost no change and thus the ratio of L/B was obviously enhanced with the increase of calcination temperature （excluding 800 ℃）. The catalytic performances of modified HZSM-5 catalysts for the cracking of n-butane were also investigated. The main properties of these catalysts were characterized by means of XRD, N2 adsorption at low temperature, NH3-TPD, FTIR of pyridine adsorption and BET surface area measurements. The results showed that HZSM-5 zeolite pretreated at 800 ℃ had very low catalytic activity for n-butane cracking. In the calcination temperature range of 500-700 ℃, the total selectivity to olefins, propylene and butene were increased with the increase of calcination temperature, while, the selectivity for arene decreased with the calcination temperature. The HZSM-5 zeolite calcined at 700 ℃ produced light olefins with high yield, at the reaction temperature of 650 ℃ the yields of total olefins and ethylene were 52.8% and 29.4%, respectively. Besides, the more important role is that high calcination temperature treatment improved the duration stability of HZSM-5 zeolites. The effect of calcination temperature on the physico-chemical properties and catalytic performance of HZSM-5 for cracking of n-butane was explored. It was found that the calcination temperature had large effects on the surface area, crystallinity and acid properties of HZSM-5 catalyst, which further affected the catalytic performance for n-butane cracking.

Thermal and hydrothermal stabilities of the alkali-treated HZSM-5 zeolites

HZSM-5 zeolites with the micro-mesopore hierarchical porosity have been prepared by the post-synthesis of alkali-treatment, and their thermal and hydrothermal stabilities were studied using DTA, XRD, and NH3-TPD characterization techniques. Compared to the unmodified zeolite, the thermal and hydrothermal stabilities of the alkali-treated ZSM-5 zeolites were slightly deteriorated because of the introduction of mesopores caused by the desilication. Nevertheless, the alkali-treated zeolite framework could be maintained until the temperature increased to 1175 ℃.

Influence of the post-treatment of HZSM-5 zeolite on catalytic performance for alkylation of benzene with methanol

The porous material HZSM-5 zeolite with micro-mesopore hierarchical porosity was prepared by post-treatment （combined alkali treatment and acid leaching） of parent zeolite and its catalytic performance for benzene alkylation with methanol was investigated. The effect of post-treatment on the textural properties was characterized by various techniques （including ICP-AES, XRD, nitrogen sorption isotherms, SEM, NH3-TPD, Py-IR and TG）. The results indicated that the post-treatment could modify the structural and acidic properties of HZSM-5 zeolite. In this procedure, not only additional mesopores were created by selective extraction of silicon but also the acidity was tuned. Consequently, the modified HZSM-5 zeolite showed larger external surface area with less acid sites as compared to the parent zeolite. It was found out that the modified zeolite exhibited a higher benzene conversion and xylene selectivity for alkylation of benzene with methanol as well as excellent life span of the catalyst than conventional ones. This can be explained by the facts that the presence of additional mesopores improved the diffusion property in the reactions. Furthermore, the modified zeolite showed an appropriate Bronsted acidity for effective suppression of the side reaction of methanol to olefins, thus reduced the accumulation of coke on the HZSM-5 zeolite, which was favorable for the catalyst stability. In comparison with the parent HZSM-5 zeolite, the modified zeolite by alkali treatment and acid leaching showed better performance for the benzene alkylation with methanol.

Influence of the Alkali Treatment of HZSM-5 Zeolite on Catalytic Performance of PtSn-Based Catalyst for Propane Dehydrogenation

The porous material ATZ with micro-mesopore hierarchical porosity was prepared by alkali treatment of parent HZSM-5 zeolite and applied for propane dehydrogenation. The zeolite samples were characterized by XRD, N2- physisorption, and NH3-TPD analysis. The results showed that the alkali treatment can modify the physicochemical prop- erties of HZSM-5 zeolite. In this case, the porous material ATZ showed larger extemal surface area with less acid sites as compared to the HZSM-5 zeolite. It was found out that the alkali treatment of HZSM-5 zeolite could promote the catalytic performance of PtSn/ATZ catalyst. The possible reason was ascribed to the low acidity of ATZ. Furthermore, the presence of mesopores could reduce the carbon deposits on the metallic surface, which was also favorable for the dehydrogenation reaction.

Effects of Operating Conditions on the Catalytic Performance of HZSM-5 Zeolites in n-Pentane Cracking

In this work,n-pentane catalytic cracking over HZSM-5 zeolites was studied at 650°C under atmosphere pressure.A particular attention was paid to the measurement of n-pentane conversion,light olefins production,product distribution,coke deposit,etc.Several indexes were defined to evaluate the effects of operating conditions on the catalytic performance of HZSM-5 zeolites.It was found that decreasing the weight hourly space velocity,increasing the reactant partial pressure,and increasing the carrier gas flow rate could inhibit C-H bond breaking and enhance the C-C bond breaking and hydride transfer reactions,leading to reduced alkenes selectivity,which suppressed the formation of external coke and alleviated the deactivation of HZSM-5 zeolites.It was deduced that the catalytic stability of HZSM-5 zeolites was improved at the cost of alkenes selectivity.Compared with decreasing the weight hourly space velocity and increasing the reactant partial pressure,increasing the carrier gas flow rate could enhance the diffusion process and protect alkenes from being consumed in coke formation in order to improve the catalytic stability of HZSM-5 zeolites with less reduction of alkenes selectivity.

Properties and Characterization of Modified HZSM-5 Zeolites

Physicochemical and catalytic properties of phosphorus and boron modified HZSM-5 zeolites treated with 100% steam at 673 K were investigated. The acidity and distribution of acidic sites were studied by infrared spectroscopy using pyridine as probe molecule and temperature programmed desorption (TPD) of ammonia. The structure of the samples was characterized by XRD, and the textural properties of the catalysts were determined by nitrogen isothermal adsorption-desorption measurements and scanning electron microscopy (SEM). The XRD results show that the modified samples have no novel crystalline phase, indicating a high dispersion of phosphorus and boron species. After treatment, the microporous volume and surface area of the samples markedly decrease, implying the blockage of the channel. The nitrogen adsorption-desorption measurements suggest that the isothermal type of all samples is a combination of isothermal type I and IV, and all hysteresis loops resemble the H4-type in the IUPAC classification. The total acidity of the modified samples, determined by pyridine adsorption IR and TPD of ammonia, decreases in contrast to that of the parent HZSM-5. The conversion of n-heptane over P and B steam-modified HZSM-5 is higher than that of P and B-modified HZSM-5 zeolites but lower than that of the parent HZSM-5.

Secondary Crystallization of Na_2CO_3-Modified HZSM-5 Zeolites with Tetrapropylammonium Hydroxide and Their Catalytic Performance in Thiophene Alkylation Reaction

The Na2CO3-modified HZSM-5 zeolites were further treated by tetrapropylammonium hydroxide(TPAOH) solution. The effect of TPAOH concentration on the secondary crystallization process was investigated. The resulting samples were characterized by a complementary combination of X-ray diffraction, N2 adsorption/desorption, scanning electron microscopy, X-ray fluorescence spectroscopy, XPS, 27 Al and 29 Si magic-angle spinning nuclear magnetic resonance spectroscopy, BET and temperature-programmed desorption techniques. The results showed that the secondary crystallization of the HZSM-5 zeolite could result in migration of non-framework species from the internal channels to the zeolite surface and their transformation into framework species. The catalytic activity of these modified samples for thiophene alkylation was evaluated. Both the activity and stability of the catalysts were improved after secondary crystallization.

Effect of external surface of HZSM-5 zeolite on product distribution in the conversion of methanol to hydrocarbons

The external surface of HZSM-5 zeolite was passivated by liquid siliceous deposition and by acidic sites poisoning with lepidine, respectively. Then methanol-to-hydrocarbons （MTH） reaction was investigated over the above as-prepared catalysts and the dissoluble coke on these used catalysts was analyzed by GC-MS, to study the role of the external surface of HZSM-5 in the catalytic reaction. Comparison with the experi- mental results based on parent ZSM-5 showed that the product distribution of MTH reaction was obviously influenced by the external surface. Evidences were listed as follows： （1） the final product on parent HZSM-5 showed higher aromatic selectivity, lower olefin selectivity, lower ra- tio of C2/C3＋ aliphatics and higher ratio of C3/C4＋ aliphatics than the reaction mixture produced by the sole catalysis of acidic sites in HZSM-5 channel; （2） a little of pentamethylbenzene and hexamethylbenzene in the product on parent HZSM-5, was produced via multi-methylation of methylbenzene on the external surface. The above conclusion may also be suitable for MTH reaction over other zeolites with 10-ring channel.

Low-temperature activation of methane over rare earth metals promoted Zn/HZSM-5 zeolite catalysts in the presence of ethylene

At low temperature of 723 K, methane can be easily activated in the presence of ethylene in the feed, and converted to higher hydrocarbons （C2-C4） and aromatics （C6-C10）, through its reaction over rare metals modified Zn/HZSM-5 zeolite catalysts without undesirable carbon oxides formation. Methane can get 37.3% conversion over the above catalysts under low temperature, and the catalysts show a longer lifetime than usual metal supported HZSM-5 zeolite catalysts without adding any rare earth metals. The effects of methane activation over various rare earth metal promoted Zn/HZSM-5 catalysts on the products and influences of several reaction conditions such as temperature, catalyst lifetime and molar ratio of CH4/C2H4 have been discussed.

Experiment and modeling of coke formation and catalyst deactivation in n-heptane catalytic cracking over HZSM-5 zeolites

Since paraffins catalytic cracking was of significant importance to light olefins and aromatics production,this work was intended to gain insights into the feature and model of coke formation and catalyst deactivation in n-heptane catalytic cracking over HZSM-5 zeolites. 18 tests of n-heptane catalytic cracking were designed and carried out over HZSM-5 zeolites in a wide range of operating conditions. A particular attention was paid to the measurement of the conversion, product distribution, coke content, and the porosity and acidity of the fresh and spent HZSM-5 zeolites. It was found that alkene and aromatic promoted coke formation, and it reduced the pore volume and acid site of HZSM-5 zeolites, tailoring its performance in n-heptane catalytic cracking. The specific relationship between HZSM-5 zeolites, n-heptane conversion, product distribution and coke formation was quantitively characterized by the exponential and linear function. Based on the reaction network, the coupled scheme of coke formation and catalyst deactivation were specified for n-heptane catalytic cracking. The dual-model was proposed for the process simulation of n-heptane catalytic cracking over HZSM-5 zeolites. It predicted not only the conversion and product distribution but also coke content with the acceptable errors.

Construction of an operando dual-beam fourier transform infrared spectrometer and its application in the observation of isobutene reactions over nano-sized HZSM-5 zeolite

An operando dual‐beam Fourier transform infrared (DB‐FTIR) spectrometer was successfully developed using a facile method. The DB‐FTIR spectrometer is suitable for the real‐time study of the dynamic surface processes involved in gas/solid heterogeneous catalysis under real reaction conditionsbecause it can simultaneously collect reference and sample spectra. The influence of gas‐phasemolecular vibration and heat irradiation at real reaction temperatures can therefore be eliminated.The DB‐FTIR spectrometer was successfully used to follow the transformation of isobutene over nano‐sized HZSM‐5 zeolite under real reaction conditions.

TEMPERATURE PROGRAMMED DESORPTION AND THERMAL DECOMPOSITION OF n-BUTYLAMINE ON ZEOLITE HZSM-5

Ⅰ. NTRODUCTIONIn order to explain the catalytic properties of zeolite HZSM-5, it is necessary to know the nature, number and strength distribution of acid sites of zeolite, and the temperature programmed desorption (TPD) of ammonia or pyridine is one of the most commonly-used methods. Compared with ammonia (pK_b=4.75) and pyri-

MODIFICATION OF ZEOLITE HZSM-5 WITH TOLUENE PRETREATMENT

Ⅰ. INTRODUCTIONPhysical treatment of the HZSM-5 catalyst with steam or coking or modification with metal salts produces high para-selectivity catalyst for alkylation or disproportionation of toluene and isomerization of xylene. However, as the para-selectivity increases, the activity always decreases, and vice versa. In this work the effect of

Catalytic Desulfurization of n-Butyl-sulfide over HZSM-5 Zeolite in the Presence of a Hydrogen Provider

The catalytic desulfurization of a model organic sulfurous compound n-butyl-sulfide in a fixed bed microreactor is studied in the presence of catalyst and a hydrogen provider. The experimental results show that the appropriate reaction conditions are： a mixed catalyst of HZSM-5 zeolite and Co-Mo/Al2O3-TiO2, a reaction temperature of 300℃, atmosphere pressure, a feed speed of 50 mL/h and a mass hourly space velocity of 3.0 h^-1 A higher catalytic property and desulfurization efficiency of the mixed catalyst of HZSM-5 zeolite and Co-Mo/Al2O3-TiO2 is achieved. The adsorption and desulfurization efficiency of the FCC gasoline from Shenghua Refinery, which is affiliated to China University of Petroleum （East China）, is 53.0 %.