POINT PATTERN MATCHING ALGORITHM BASED ON POINT PAIR TOPOLOGICAL CHARACTERISTICS AND SPECTRAL MATCHING

Most of the Point Pattern Matching (PPM) algorithm performs poorly when the noise of the point's position and outliers exist. This paper presents a novel and robust PPM algorithm which combined Point Pair Topological Characteristics (PPTC) and Spectral Matching (SM) together to solve the afore mentioned issues. In which PPTC, a new shape descriptor, is firstly proposed. A new comparability measurement based on PPTC is defined as the matching probability. Finally, the correct matching results are achieved by the spectral matching method. The synthetic data experiments show its robustness by comparing with the other state-of-art algorithms and the real world data experiments show its effectiveness.

Quantitative Study on Characteristics of the Weibull Distribution

Aim To quantitatively study three characteristics of the Weibull distribution. Methods Theoritical analysis of the three characteristics of parameters of the Weibull distribution was done and mathematics software was used to make some chart analysis. Results 17 equations and 7 figures were made. Conclusion Under the standard form, the class of the Weibull probable density founction(pdf) curves appear double peak shape. Under the standard form, the maximum value point curve of the Weibull pdf takes line t =0 and t=1 as asymptotes. When β = 3 30-3 40, the Weibull distribution is the most similar to the normal distribution.

Characteristics structure analysis on debris cloud in the hypervelocity impact of disk projectile on thin plate

In this paper,the gauge points setting is introduced in the SPH simulation to analyze the debris cloud structure generated by the hypervelocity impact of disk projectile on thin plate.Compared with the experiments,more detailed information of the debris cloud structure can be classified from the numerical simulation.However,due to the solitary dispersion and overlap display of the particles in the SPH simulation,accurate comparison between numerical and experimental results is difficult to be performed.To track the velocity and spatial distribution of the particles in the debris cloud induced from disk and plate,gauge points are locally set in the single-layer profile in the SPH model.By analyzing the gauge points’spatial coordinate and velocity,the location and velocity of characteristic points in the debris cloud are determined.The boundary of debris cloud is achieved,as well as the fragments distribution outside the main structure of debris cloud.

Quantitative description of infrared radiation characteristics of preflawed sandstone during fracturing process

Previous studies show that infrared radiation temperature(IRT)abnormalities are always accompanied by the crack development in rocks under external loads.In this context,experiments were conducted on preflawed sandstone to investigate the infrared radiation characteristics during failure process.Two indicators were defined herein,i.e.coefficient of variation of IRT(CVIRT)and skewness of IRT(SIRT).The regression analysis shows that the IRT probability distributions during loading process fit the Gaussian model.The variations in the CVIRT are characterized by four stages:primary stage,steady stage,accelerating stage and post-peak stage.Besides,the variations in the SIRT are divided into three stages:primary stage,steady stage and failure and post-peak stage.The precursor point for preflawed rock failure is identified based on the CVIRTetime curve,with average precursor point of 83%of the peak stress.Compared with other IRT indicators,the proposed two IRT indicators have higher sensitivity to IRT abnormalities during failure process.Furthermore,the connection between the IRT indicators and the rock fracturing was investigated to interpret the IRT indicator abnormalities.Based on the Verhulst inverse function,a new quantitative model was presented to describe the primary stage,steady stage and accelerating stage of the CVIRTetime curve.The results obtained in this study can provide early-warning information for rock failure prediction.

Formation of explosively formed penetrator with fins and its flight characteristics

The ultimate goal of weapon system employing an explosively formed penetrator(EFP) is to defeat a target at the longest standoff.In order to do this,an EFP must be aerodynamically stable so as to strike the target at a small angle of obliquity,and the decay velocity per meter of EFP must be smaller at extended standoff.As the angle of attack increases,the penetration ability of EFP greatly reduces.The fins improve the EFP aeroballistic characteristics and decrease the flight drag of EFP as well.EFP with fins formed by three-point initiation is presented.The formation of EFP with fins is studied by LS-DYNA,and the aeroballistics is studied through experiment.The experimental results show that the decay velocity per meter of EFP with fins is much smaller than that of normal EFP.and the attitude angle steadily decreases.

A new control law based on characteristic exponent assignment for libration point orbit maintenance

A new method is developed for stabilizing motion on collinear libration point orbits using the formalism of the circular restricted three body problem. Linearization about the collinear libration point orbits yields an unstable linear parameter-varying system with periodic coefficients. Given the variational equations, an innovative control law based on characteristic exponent assignment is introduced for libration point orbit maintenance. A numerical simulation choosing the Richardson＇s third order approximation for a halo orbit as a nominal orbit is conducted, and the results demonstrate the effectiveness of this control law.

Acoustic Emission and Damage Characteristics of Alumina

Advanced multi-channels acoustic emission （A.E） system is used to study the fracture process of alumina material subjected by three-point-bending loading. Using AE counts and AE hits, the location of damage and damage characteristics are discussed. AE energy, AE counts, AE amplitude changing with loading time are analyzed for the notched alumina specimen. It is indicated that AE characteristic parameters reflect the damage process and fracture of material.

The Spatial Characteristics of a Line and Their Application to Line Simplification

This paper discusses the spatial knowledge related to a line ,and the characteristic points of lines is detected.According to the requirements of line generalization,new algorithms for identifying characteristic line points are presented.These characteristic points are used to improve the algorithms of line generalization.An algorithm for identifying bends is shown.In this paper,improved algorithms based on those by Douglas_Peucker,Visvalingam and Whyatt are shown.In this test,the progressive process of line generalization is emphasized.

Improvement of Camera Calibration Accuracy Based on Periodic Arrangement Characteristics of Calibration Target Pattern

Conventional camera calibration that employs calibration targets is a commonly used method to acquire a camera’s intrinsic and/or extrinsic parameters. The calibration targets are usually designed as periodic arrays of simple high-contrast patterns that provide highly accurate world coordinate system points and the corresponding image pixel coordinate system points. The existing pixel coordinate extraction algorithms can reach a sub-pixel level; however, they treat each single pattern in one image as an independent individual, which makes it difficult to further improve extraction accuracy. In this paper, a novel method is proposed by utilizing the periodic arrangement characteristics of the calibration target pattern as a global constraint to improve the calibration accuracy. Based on a camera’s pinhole model, the intersection point of two fitted curves is used as an optimized pixel point to replace the initial one. Following the pixel coordinate optimization procedures, experiments were performed using real data from a 3D laser line scanner and a dynamic precision calibration target. Our results show that the relative errors of camera homography matrix elements obtained by the proposed optimization method were reduced compared with the commonly used method. The average coordinate measurement accuracy can be improved by nearly 0.05 mm. It is shown that the proposed optimization method can enhance the camera calibration accuracy, especially when the extracted pixels are of poorer precision. © 2017 Tianjin University and Springer-Verlag Berlin Heidelberg

Analysis on the Characteristics of the Kalpin Ms5.3 Earthquake Sequence of December 1,2013 and Anomalies before the Earthquake

This paper introduces the basic parameters,focal mechanism solutions and earthquake sequence characteristics of the Kalpin M_S5.3 earthquake sequence of December 1,2013,and analyzed seismic activity before the earthquake,the adjacent tectonic features and the precursory anomaly at fixed points within a range of 200 km. Research indicates:(1) The earthquake occurred on Kalpin fault,the source rupture type is thrust faulting with sinistral strike-slip component.( 2) The earthquake sequence is mainshock-aftershock type,with the aftershock distribution attenuating quickly and trending NE.(3) Abnormal seismic activity before the earthquake was characterized by seismically nesting quiescence of MS2. 0-4. 0 earthquakes,seismic quiescence of MS4. 0 earthquakes and seismic belts of MS3. 0 earthquakes in the Kalpin block, abnormal enhancement zone of moderate earthquakes on Puchang fault and seismological parameters.(4) Anomalies of precursory observation data at fixed stations are mainly characterized by mutation. Apart from the borehole tiltmeter in Halajun, the spatial distribution of other abnormal precursors showed a phenomenon of migration from the near field to far field and from the epicenter to the peripheries.

DETECTING AND DETERMINING THE CHARACTERISTIC POINTS ON THE SURFACE／SURFACE INTERSECTIONS

in this paper we present a method for detecting and determining the characteristicpoints on the surfacelsurface intersection. At first , criteria for detecting the characteristic pointsare derived by aid of a theorem on algebraic curves , and then ar algorithm is presented for locaringthe characteristic points which is coupled with the numerical tracing techniques. instances are alsopresented for illustrating the capability of our algorithm.

The Convergence Characteristic of the Forward I-V Characteristic Curves of a Semiconductor Silicon Barrier at Different Temperatures

The /-V-（T） characteristic curves of p-n junctions with the forward voltage as the independent variable, the logarithm of forward current as the dependent variable, and the junction temperature as the parameter, almost converge at one point in the first quadrant. The voltage corresponding with the convergence point nearly equals the bandgap of the semiconductor material. This convergence point can be used to obtain the I-V characteristic curve at any temperature.

颈椎定点旋转手法在体生物力学量化及影响因素分析

背景:颈椎定点旋转手法属于技术要求较高的力学操作,但目前其生物力学还缺少相关量化数据;且颈椎定点旋转手法的影响因素研究包括了众多参数并且存在差异性,需要进一步对其影响因素进行分析,以完善其相关数据。目的:量化颈椎定点旋转手法在体生物力学参数,探讨各生物力学参数之间的相关性,及研究对象个体特征差异对手法力学参数的影响。方法:选取35例颈椎病患者为测试对象,均为广西中医药大学第一附属医院仁爱分院骨伤科门诊就诊者。术者佩戴穿戴式力学测量手套采集手法力学参数,包括拇指预加载力、拇指最大推力、掌心预加载力、掌心旋扳力和掌心旋扳最大作用力。并采集患者个人特征参数,包括年龄、身高、体质量和颈围。对手法操作过程中的关键力学参数进行特征分析及不同个体特征进行量化,对力学指标参数进行Spearman相关性分析;分析不同个体特征参数对生物力学可能存在的影响。结果与结论:(1)双侧力学参数相比,左侧操作与右侧操作无显著差异性(P>0.05)。(2)拇指预加载力均值为(7.21±1.19)N、拇指最大推力均值为(28.40±4.48)N、掌心预加载力均值为(5.67±2.49)N、掌心旋扳力均值为(10.90±5.11)N、掌心旋扳最大作用力均值为(16.00±7.27)N。(3)掌心预加载力和掌心旋扳力存在显著正相关(Rs=0.812,P<0.01);掌心预加载力和掌心旋扳最大作用力存在显著正相关(Rs=0.773,P<0.01);掌心旋扳力和掌心旋扳最大作用力存在显著正相关(Rs=0.939,P<0.01)。(4)患者体质量与拇指预加载力、掌心预加载力、掌心旋扳力及掌心旋扳最大作用力之间存在显著正相关(P<0.05)。(5)结果证实,颈椎定点旋转手法治疗颈椎病操作中生物力学有一定的标准量值。该手法左右侧操作无显著差异性,具有较好的一致性和可重复性。掌心预加载力、掌心旋扳力及掌心旋扳最大作用力3种力之间存在一致性和协调性,对于治疗效果的贡献是相近的。患者的体质量是影响颈椎定点旋转手法重要的因素。

INVOLUTIONS WITH FIXED POINT SET RP(2m)∪P(2m, 2n + 1)

Let （M, T） be a smooth closed manifold with a smooth involution T whose fixed point set is a disjoint union of an even-dimensional real projective space and a Dold manifold. In some cases, the equivariant bordism classes of （M, T） are determined.

An interpolating reproducing kernel particle method for two-dimensional scatter points

An interpolating reproducing kernel particle method for two-dimensional （2D） scatter points is introduced. It elim- inates the dependency of gridding in numerical calculations. The interpolating shape function in the interpolating repro- ducing kernel particle method satisfies the property of the Kronecker delta function. This method offers a mathematics basis for recognition technology and simulation analysis, which can be expressed as simultaneous differential equations in science or project problems. Mathematical examples are given to show the validity of the interpolating reproducing kernel particle method.

The use of point load test for Dubai weak calcareous sandstones

Intact rock is typically described according to its uniaxial compressive strength （UCS）. The UCS is needed in the design of geotechnical engineering problems including stability of rock slopes and design of shallow and deep foundations resting on and/or in rocks. Accordingly, a correct measure-ment/evaluation of the UCS is essential to a safe and economic design. Typically, the UCS is measured using the unconfined compression tests performed on cylindrical intact specimens with a minimum length to width ratio of 2. In several cases, especially for weak and very weak rocks, it is not possible to extract intact specimens with the needed minimum dimensions. Thus, alternative tests （e.g. point load test, Schmidt hammer） are used to measure rock strength. The UCS is computed based on the results of these tests through empirical correlations. The literature includes a plethora of these correlations that vary widely in estimating rock strength. Thus, it is paramount to validate these correlations to check their suitability for estimating rock strength for a specific location and geology. A review of the available correlations used to estimate the UCS from the point load test results is performed and summarized herein. Results of UCS, point load strength index and Young＇s modulus are gathered for calcareous sandstone specimens extracted from the Dubai area. A correlation for estimating the UCS from the point load strength index is proposed. Furthermore, the Young＇s modulus is correlated to the UCS.

The Influence of Overlap Degree Research on Nozzle Governing Characteristic

To solve the problems existing in the flow characteristics of steam turbine unit, the influence of valve overlap degree on nozzle governing steam turbine had been studied. The combined flow characteristics of given valve overlap degree were obtained for a 600MW steam turbine unit by the method of theoretical calculation combined with simulation test, and the influence of valve overlap degree on governing stage efficiency and steam chest pressure had been also analyzed. This paper discussed the selection of rational overlap degree and introduced a new method of building model for governing stage efficiency of steam turbine in constant pressure operation condition, which provided theoretical guidance for optimization research on nozzle governing steam turbine operation.

Determination of work-hardening exponent for sheet metal using three-point method

Three characteristic points in the deformation history of a fractured tensile specimen are selected tocalculate two values of n( n1 and n2 ) to represent the hardening ability of material during the homogeneous plas-tic deformation and the following large plastic deformation. Experimental results obtained with mild streel andred copper show that n determined using the three-point method proposed is better to describe the hardening a-bility of material. It is therefore concluded that three-point method can be used to describe the hardening prop-erty of material during both homogeneous deformation and large plastic deformation.

Trigger points and sensitized acupoints:same book,different covers?

Acupoints and trigger points in traditional Chinese medicine represent two different minimally invasive therapy systems-based,respectively,on traditional acupuncture and dry needles.Many studies argue that trigger points and traditional acupoints are conceptually similar because they generally have identical locations on the human body.However,whether trigger points contribute to the formation of the traditional acupuncture technique is controversial.Although many relevant studies have been conducted,this controversy continues to hinder the development of both disciplines.Recently,researchers of Chinese acupuncture have proposed the“acupoint sensitization”theory,which postulates that traditional acupoints may be sensitized by diseases,environments,and therapies.This turns them into a“sensitized state.”Recent studies suggest that trigger points and sensitized acupoints share similar biological properties.To clarify the above-mentioned confusion,we reviewed relevant studies on these two concepts and attempted to analyze their relationship.In this paper,we provide a general summary of acupoint sensitization theory and sensitized acupoints.We then compare trigger points with sensitized acupoints by categorizing their similarities and differences,including location and range,pathological morphology,pain perception,surface temperature effects,and bioelectrical properties.We believe that,because trigger points and sensitized acupoints have many shared properties,they might constitute“the same book with different covers.”

Determination of the diagnostic value of the resazurin reduction assay for evaluating boar semen by receiver operating characteristic analysis

Aim： To assess that metabolic status of spermatozoa could provide a useful tool for evaluation of semen quality. Methods： The accuracy of the spectrophotometric application of the resazurin reduction assay was assessed using receiver operating characteristic （ROC） analysis. Results： Areas under ROC curves （AUC） for motile sperm concentration and sperm index （SI） （sperm concentration multiplied by the square root of percentage sperm motility multiplied by the percentage normal sperm morphology） were 0.922. The best discrimination between poor and good semen samples according to the SI was achieved at a cut-off point of A610 = 0.209, where high sensitivity （94.1%） and specificity （91.7%） were calculated. The assay was less accurate when motile sperm concentration was used as the criterion value, yielding sensitivity of 88.2% and specificity of 87.5%, respectively. Likelihood ratios （LR） indicate that absorbances lower than 0.209 were at least 11.3 times as likely to be found in good semen samples than those in poor according to the SI, whereas in the case of motile sperm concentration, the LR was calculated to be 7.06. Conclusion： These results show that the resazurin reduction assay combined with spectrophotometry is an accurate method of assessing the quality of boar semen.