Wave propagation of a functionally graded plate via integral variables with a hyperbolic arcsine function

Several studies on functionally graded materials(FGMs)have been done by researchers,but few studies have dealt with the impact of the modification of the properties of materials with regard to the functional propagation of the waves in plates.This work aims to explore the effects of changing compositional characteristics and the volume fraction of the constituent of plate materials regarding the wave propagation response of thick plates of FGM.This model is based on a higher-order theory and a new displacement field with four unknowns that introduce indeterminate integral variables with a hyperbolic arcsine function.The FGM plate is assumed to consist of a mixture of metal and ceramic,and its properties change depending on the power functions of the thickness of the plate,such as linear,quadratic,cubic,and inverse quadratic.By utilizing Hamilton’s principle,general formulae of the wave propagation were obtained to establish wave modes and phase velocity curves of the wave propagation in a functionally graded plate,including the effects of changing compositional characteristics of materials.

Optimization design of conical reaction teeth of shear wave vibroseis vibration plate

The vibrator plate is the link between the vibroseis vehicle and the earth,as well as the core com-ponent of the vibrator vehicle.In this paper,the coupling effect between the vibrator plate and the earth is an-alyzed from two aspects of reaction tooth arrangement and reaction tooth conical angle,and three groups of experimental models are optimized and designed.The model construction and numerical analysis of the shear wave vibroseis vibrator plate are carried out with ANSYS software.The motion law between the vibration plate and the earth at work was studied,the strain energy of the three experimental models in operation,the maximum displacement of particle at the same position and other reference indices were compared and ana-lyzed,with 28 conical reaction teeth were arranged on both sides.The coupling effect between the vibration plate and the earth was best when the tooth angle was 60°.Compared with the toothless vibration plate,the energy efficiency is improved by about 20%,and the coupling effect between the vibrator plate and the earth is effectively enhanced.It is found that the coupling effect is enhanced through increasing the number of reac-tion teeth of the vibration plate by increasing the coupling area between the vibration plate and the earth.

Excitation and Detection of Shear Horizontal Waves with Electromagnetic Acoustic Transducers for Nondestructive Testing of Plates

The fundamental shear horizontal（SH0） wave has several unique features that are attractive for long-range nondestructive testing（NDT）. By a careful design of the geometric configuration, electromagnetic acoustic transducers（EMATs） have the capability to generate a wide range of guided wave modes, such as Lamb waves and shear-horizontal（SH） waves in plates. However, the performance of EMATs is influenced by their parameters. To evaluate the performance of periodic permanent magnet（PPM） EMATs, a distributed-line-source model is developed to calculate the angular acoustic field cross-section in the far-field. Numerical analysis is conducted to investigate the performance of such EMATs with different geometric parameters, such as period and number of magnet arrays, and inner and outer coil widths. Such parameters have a great influence on the directivity of the generated SH0 waves that arises mainly in the amplitude and width of both main and side lobes. According to the numerical analysis, these parameters are optimized to obtain better directivity. Optimized PPM EMATs are designed and used for NDT of strip plates. Experimental results show that the lateral boundary of the strip plate has no perceivable influence on SHO-wave propagation, thus validating their used in NDT. The proposed model predicts the radiation pattern ofPPM EMATs, and can be used for their parameter optimization.

SCATTERING OF FLEXURAL WAVES AND DYNAMIC STRESS CONCENTRATIONS IN MINDLIN'S THICK PLATES WITH A CUTOUT

Using the complex variable method and conformal mapping,scat- tering of flexural waves and dynamic stress concentrations in Mindlin's thick plates with a cutout have been studied.The general solution of the stress problem of the thick plate satisfying the boundary conditions on the contour of cutouts is obtained. Applying the orthogonal function expansion technique,the dynamic stress problem can be reduced into the solution of a set of infinite algebraic equations.As examples, numerical results for the dynamic stress concentration factor in Mindlin's plates with a circular,elliptic cutout are graphically presented in sequence.

Uplift Pressure of Waves on A Horizontal Plate

Uplift pressures of waves acting on horizontal plates are the important basis for design of maritime hollow-trussed structures. In this paper, an experimental study on the uplift pressures of waves on a horizontal plate is conducted by use of a series of model tests. Detailed analysis has been given to the formation mechanism of uplift pressures of waves. It is considered that the impact pressure intensity is mainly affected by geometrical factors (tangential angle of waves), dynamic factors (wave height, wave velocity, etc.) and air cushion. Based on the test results, an equation for calculation of the maximum uplift pressure intensity of waves on a plate is presented. A large quantity of test data shows good agreement of the present equation with the test results.

Draft effect on wave action with a semi-infinite elastic plate

A method for analyzing reflection and transmission of ocean waves from a semi-infinlte elastic plate with a draft is developed. The relation of energy conservation for plates with three different edge conditions （ free, simply supported and built-in） is also derived. It is found that the present method satisfies the energy relation very well. The effects of draft on wave reflection and transmission coefficients as well as on the vertical vibration of the plates are examined through numerical tests. It is demonstrated that the zero draft assumption works well for low wave frequencies, but the effect of plate draft becomes significant for high wave frequencies.

The wave and vibratory power transmission in a finite L-shaped Mindlin plate with two simply supported opposite edges

In this paper,wave and vibratory power transmission in a finite L-shaped Mindlin plate with two simply supported opposite edges are investigated using the wave approach.The dynamic responses,active and reactive power flow in the finite plate are calculated by the Mindlin plate theory （MPT） and classic plate theory （CPT）.To satisfy the boundary conditions and continuous conditions at the coupled junction of the finite L-shaped plate,the near-field and far-field waves are entirely contained in the wave approach.The in-plane longitudinal and shear waves are also considered.The results indicate that the vibratory power flow based on the MPT is different from that based on the CPT not only at high frequencies but also at low and medium frequencies.The influence of the plate thickness on the vibrational power flow is investigated.From the results it is seen that the shear and rotary inertia correction of the MPT can influence the active and reactive power at the junction of the L-shaped plate not only at high frequencies but also at low and medium frequencies.Furthermore,the effects of structural damping on the active and reactive power flow at the junction are also analyzed.

Oblique wave scattering by a semi-infinite elastic plate with finite draft floating on a step topography

On the basis of a potential theory and Euler-Bernoulli beam theory, an analytical solution for oblique wave scattering by a semi-infinite elastic plate with finite draft floating on a step topography is developed using matched eigenfunction expansions. Different from previous studies, the effects of a wave incident angle, a plate draft, three different plate edge conditions （free, simply supported and built-in） and a sea-bottom topography are all taken into account. Moreover, the plate edge conditions are directly incorporated into linear algebraic equations for determining unknown expansion coefficients in velocity potentials, which leads to a simple and efficient solving procedure. Numerical results show that the convergence of the present solution is good, and an energy conservation relation is well satisfied. Also, the present predictions are in good agreement with known results for special cases. The effects of the wave incident angle, the plate draft, the plate edge conditions and the sea-bottom topography on various hydrodynamic quantities are analyzed. Some useful results are presented for engineering designs.

On the Interaction of Surface Waves with An Elastic Plate of Finite Length in Head Seas

An eigen-function expansion method based on a new orthogonal inner product is proposed by Sahoo et al. (2000) for the study of the hydroelastic response of mat-type VLFS in head seas. However, their main emphasis is on the effect of edge conditions and they assume that the plate is of a semi-infinite length. In reality, the plate is of finite length. For consideration of the finite length effect, the reflection and transmission from the other end must be considered. The effect of this reflection and transmission on the hydroelastic response of VLFS is of interest for practical application. Furthermore, the physical meaning of the new inner product was not given in their paper. In this paper, it is shown that the new inner product can he derived from the governing equation and the bottom boundary conditions. Then the same eigen-function expansion method is adopted for the study of the hydroelastic response of an elastic plate of finite length in surface waves. Detailed comparisons are made between the present finite length model and the semi-infinite model and between the present model predictions and the experimental results. It is found that that the finite length effect is significant and the accuracy of present model is higher than the semi-infinite model. Furthermore, a new phenomenon, which is not mentioned in Sahoo et al. (2000), is found. Taht is, for larger L/h ratios, the reflection and transmission coefficients will oscillate with the non-dimensional parameter k(0) h. Further study is needed for full understanding of this phenomenon.

Study on Scattering Wave Force of Horizontal and Vertical Plate Type Breakwaters

The interaction between wave and horizontal and vertical plates is investigated by the boundary element method, and the relations of wave exciting force with plate thickness, submergence and length are obtained. It is found that： 1） The efficient wave exciting force exists while plate submergence is less than 0.5 m, and the plate is very thin with order O（0.005 m）. 2） The maximum heave wave exciting force exists, and it is the main factor for surface and submerged horizontal plate while the roll force can be ignored. 3） The maximum sway wave exciting force exists, it is the main factor for surface or submerged vertical plate, and the roll force is about 20 times of horizontal plate.

Hydroelastic Response of A Circular Plate in Waves on A Two-Layer Fluid of Finite Depth

The hydroelastic response of a circular, very large floating structure(VLFS), idealized as a floating circular elastic thin plate, is investigated for the case of time-harmonic incident waves of the surface and interfacial wave modes, of a given wave frequency, on a two-layer fluid of finite and constant depth. In linear potential-flow theory, with the aid of angular eigenfunction expansions, the diffraction potentials can be expressed by the Bessel functions. A system of simultaneous equations is derived by matching the velocity and the pressure between the open-water and the platecovered regions, while incorporating the edge conditions of the plate. Then the complex nested series are simplified by utilizing the orthogonality of the vertical eigenfunctions in the open-water region. Numerical computations are presented to investigate the effects of different physical quantities, such as the thickness of the plate, Young’s modulus, the ratios of the densities and of the layer depths, on the dispersion relations of the flexural-gravity waves for the two-layer fluid. Rapid convergence of the method is observed, but is slower at higher wave frequency. At high frequency, it is found that there is some energy transferred from the interfacial mode to the surface mode.

Cumulative second-harmonic generation of Lamb waves propagating in a two-layered solid plate

The physical process of cumulative second-harmonic generation of Lamb waves propagating in a two-layered solid plate is presented by using the second-order perturbation and the technique of nonlinear reflection of acoustic waves at an interface. In general, the cumulative second-harmonic generation of a dispersive guided wave propagation does not occur. However, the present paper shows that the second-harmonic of Lamb wave propagation arising from the nonlinear interaction of the partial bulk acoustic waves and the restriction of the three boundaries of the solid plates does have a cumulative growth effect if some conditions are satisfied. Through boundary condition and initial condition of excitation, the analytical expression of cumulative second-harmonic of Lamb waves propagation is determined. Numerical results show the cumulative effect of Lamb waves on second-harmonic field patterns.

Analysis of the stress wave and rarefaction wave produced by hypervelocity impact of sphere onto thin plate

Shock wave is emitted into the plate and sphere when a sphere hypervelocity impacts onto a thin plate.The fragmentation and phase change of the material caused by the propagation and unloading of shock wave could result in the formation of debris cloud eventually.Propagation models are deduced based on one-dimensional shock wave theory and the geometry of sphere,which uses elliptic equations(corresponding to ellipsoid equations in physical space)to describe the propagation of shock wave and the rarefaction wave.The“Effective thickness”is defined as the critical plate thickness that ensures the rarefaction wave overtake the shock wave at the back of the sphere.The“Effective thickness”is directly related to the form of the debris cloud.The relation of the“Effective thickness”and the“Optimum thickness”is also discussed.The impacts of Al spheres onto Al plates are simulated within SPH to verify the propagation models and associated theories.The results show that the wave fronts predicted by the propagation models are closer to the simulation result at higher impact velocity.The curvatures of the wave fronts decrease with the increase of impact velocities.The predicted“Effective thickness”is consistent with the simulation results.The analysis about the shock wave propagation and unloading in this paper can provide a new sight and inspiration for the quantitative study of hypervelocity impact and space debris protection.

Wave Scattering by Twin Surface-Piercing Plates Over A Stepped Bottom:Trapped Wave Energy and Energy Loss

To evaluate the trapped wave energy and energy loss, the problem of wave scattering by twin fixed vertical surface- piercing plates over a stepped bottom is numerically simulated using the open source package OpenFOAM and the associated toolbox waves2Foam. The volume of fluid (VOF) method was employed to capture the free surface in the time domain. The validation of the present numerical model was performed by comparing with both the analytical and experimental results. The effects of the spacing between two plates and the configuration of stepped bottom on the hydrodynamic characteristics, such as reflection and transmission coefficients, viscous dissipation ratio, and relative wave height between the plates (termed as trapped wave energy), were examined. Moreover, the nonlinear effects of the incident wave height on the hydrodynamic characteristics were addressed as well. The results show that the step configuration can be tuned for efficient-performance of wave damping, and the optimum configurations of the step length B, the step height h1 and the spacing b, separately equaling λ/4, 3h/4, and 0.05h (λ and h are the wavelength and the water depth, respectively), are recommended for the trapping of wave energy.

FLEXURAL WAVE PROPAGATION IN NARROW MINDLIN'S PLATE

Appling Mindlin＇s theory of thick plates and Hamilton system to propagation of elastic waves under free boundary condition, a solution of the problem was given. Dispersion equations of propagation mode of strip plates were deduced from eigenfunction expansion method. It was compared with the dispersion relation that was gained through solution of thick plate theory proposed by Mindlin. Based on the two kinds of theories, the dispersion curves show great difference in the region of short waves, and the cutoff frequencies are higher in Hamiltonian systems. However, the dispersion curves are almost the same in the region of long waves.

Numerical Study on the Effect of Submerged Depth on the Horizontal Plate Wave Energy Converter

The growing search for clean and renewable energy sources has given rise to the studies of exploring sea wave energy. This paper is concerned with the numerical evaluation of the main operational principle of a submerged plate employed for the conversion of wave energy into electrical one. The numerical model used to solve the conservation equations of mass, momentum and transport of volume fraction is based on the finite volume method （FVM）. In order to tackle with the flow of mixture of air-water and its interaction with the device, the multiphase model volume of fluid （VOF） is employed. The purpose of this study is the evaluation of a numerical model for improvement of the knowledge about the submerged plate wave energy converter, as well as the investigation of the effect of the distance from the plate to the bottom of the sea （HP） on the performance of the converter. The simulations for several distances of the plate from the seabed show that the optimal efficiency is 64%, which is obtained for HP=0.53 m （88% of the depth）. This efficiency is 17% larger than that found in the worst case （HP=0.46 m, 77% of the depth）.

Investigation of SH-Wave Fundamental Modes in Piezoelectromagnetic Plate: Electrically Closed and Magnetically Closed Boundary Conditions

It is theoretically considered the propagation (first evidence) of new dispersive shear-horizontal (SH) acoustic waves in the piezoelectromagnetic (magnetoelectroelastic) composite plates. The studied two-phase composites (BaTiO3-CoFe2O4 and PZT-5H-Terfenol-D) possess the piezoelectric phase (BaTiO3, PZT-5H) and the piezomagnetic phase (CoFe2O4, Terfenol-D). The mechanical, electrical, and magnetic boundary conditions applied to both the upper and lower free surfaces of the plate are as follows: the mechanically free, electrically closed, and magnetically closed surfaces. As a result, the fundamental modes of two new dispersive SH-waves recently discovered in book [Zakharenko, A.A. (2012) ISBN: 978-3-659-30943-4] were numerically calculated. It was found that for large values of normalized plate thickness kd (k and d are the wavenumber and plate half-thickness, respectively) the velocities of both the new dispersive SH-waves can approach the nondispersive SH-SAW velocity of the piezoelectric exchange surface Melkumyan (PEESM) wave. It was also discussed that for small values of kd, the experimental study of the new dispersive SH-waves can be preferable in comparison with the nondispersive PEESM wave. The obtained results can be constructive for creation of various technical devices based on (non)dispersive SH-waves and two-phase smart materials. The new dispersive SH-waves propagating in the plates can be also employed for nondestructive testing and evaluation. Also, it is obvious that the plates can be used in technical devices instead of the corresponding bulk samples for further miniaturization.

THEORY AND EXPERIMENTAL INVESTIGAION OF FLEXURAL WAVE PROPAGATION IN THIN RECTANGULAR PLATE WITH PERIODIC STRUCTURE

With the idea of the phononic crystals, a thin rectangular plate with two-dimensional periodic structure is designed. Flexural wave band structures of such a plate with infinite structure are calculated with the plane-wave expansion （PWE） method, and directional band gaps are found in the ΓX direction. The acceleration frequency response in the ΓX direction of such a plate with finite structure is simulated with the finite element method and verified with a vibration experiment. The frequency ranges of sharp drops in the calculated and measured acceleration frequency response curves are in basic agreement with those in the band structures. Thin plate is a widely used component in the engineering structures. The existence of band gaps in such periodic structures gives a new idea in vibration control of thin plates.

Scattering of Oblique Water Waves by Two Unequal Surface-Piercing Vertical Thin Plates with Stepped Bottom Topography

Based on linear water-wave theory, this study investigated the scattering of oblique incident water waves by two unequal surface-piercing thin vertical rigid plates with stepped bottom topography. By using the matched eigenfunction expansion method and a least square approach, the analytical solutions are sought for the established boundary value problem. The effects of the incidence angle, location of step, depth ratio of deep to shallow waters,and column width between two plates, on the reflection coefficients, the horizontal wave forces acting on the two plates, and the mean surface elevation between the two plates, are numerically examined under a variety of wave conditions. The results show that the existence of the stepped bottom between two plates considerably impacts the hydrodynamic performances of the present system. It is found that the effect of stepped bottom on the reflection coefficient of the present two-plate structure is evident only with waves of the low dimensionless frequency.Moreover, the influence of the step location on the hydrodynamic performance of the present two-plate structure is slight if the step is placed in between the two plates.

Dynamic Response of Stiffened Plates with Holes Subjected to Shock Waves and Fragments

The power field of shock waves and fragments is analyzed and set up, and the damage modes of stiffened plates are put forward. According to the structural characters of the stiffened plates investigated and the properties of the shock waves and fragments, the experiments on the shock waves acting on the stiffened plates (penetrated and non-penetrated by fragments) are mainly conducted. The dynamic response rules of stiffened plates with holes under shock waves and fragments loading are obtained. The results show that the penetration of fragments into stiffened plates hardly affects their deformation produced by shock waves..