The influence of the concentration of Zn2+ ions on zinc electroplating process was investigated by means of electrochemical noise (EN) and cyclic voltammetry methods in conjunction with the scanning electron microscop...The influence of the concentration of Zn2+ ions on zinc electroplating process was investigated by means of electrochemical noise (EN) and cyclic voltammetry methods in conjunction with the scanning electron microscopy (SEM) technique. It was found that the EN generated during the electroplating of dentritic or large polymeric zinc deposit has large potential oscillation amplitude and positive potential drift while the compact zinc deposit possesses small noise amplitude and little potential drift. With the change of rate determining step from diffusion-control through mixed-control to activation-control, the maximum relative energy obtained from wavelet analysis defined from the region with larger scales to those with smaller scales, and the EDP (relative energy distribution plot) can be us, as 'fingerprints' of EN to characterize the electroplating process and the deposit structure. The results also showed that electrochemical noise technique can give more information about the electrodeposit structure than other normal electrochemical measurements, such as linear potential sweep method and cyclic voltammetry technique.展开更多
Zinc concentrate with high gallium content is one of the main resources of gallium.The gallium presents in the form of isomorphism in tetrahedron coordination with sulfur in sphalerite.The research was to investigate ...Zinc concentrate with high gallium content is one of the main resources of gallium.The gallium presents in the form of isomorphism in tetrahedron coordination with sulfur in sphalerite.The research was to investigate the amenability of zinc concentrate with high gallium to pressure oxygen leaching.The particle size,sulfuric acid concentration,oxygen partial pressure,additive amount,and time of reaction were studied.The extraction yields of gallium and zinc are 86%and 98%,respectively.The optimal condition is 100 g of zinc concentrate with particle size smaller than 38 lm,sulfuric acid concentration150 g L-1,leaching temperature 150℃,leaching time120 min,oxygen partial pressure 0.7 MPa,additive amount of 0.2 wt%.展开更多
Effects of particle size of the zinc sulfide concentrate,leaching temperature,solid-to-liquid ratio and additive amount on pressure acid leaching process of the zinc sulfide concentrate were studied.The results indica...Effects of particle size of the zinc sulfide concentrate,leaching temperature,solid-to-liquid ratio and additive amount on pressure acid leaching process of the zinc sulfide concentrate were studied.The results indicate that the additive can improve the reaction kinetics and the conversion rate.And sulfur can be successfully separated from the zinc sulfide concentrate as elemental sulfur.The reasonable experiment parameters are obtained as follows:the leaching temperature 150℃,oxygen partial pressure 1 MPa,additive amount 1%,solid-to-liquid ratio 1:4,leaching time 2 h,initial sulfuric acid concentration 15%,and particle size less than 44μm.Under the optimum conditions,the leaching rate of the zinc can reach 95%and the reduction rate of the sulfur can reach 90%.展开更多
基金This work was supported by the National Natural Science Foundation of China(No.20203015 and No.50499335).
文摘The influence of the concentration of Zn2+ ions on zinc electroplating process was investigated by means of electrochemical noise (EN) and cyclic voltammetry methods in conjunction with the scanning electron microscopy (SEM) technique. It was found that the EN generated during the electroplating of dentritic or large polymeric zinc deposit has large potential oscillation amplitude and positive potential drift while the compact zinc deposit possesses small noise amplitude and little potential drift. With the change of rate determining step from diffusion-control through mixed-control to activation-control, the maximum relative energy obtained from wavelet analysis defined from the region with larger scales to those with smaller scales, and the EDP (relative energy distribution plot) can be us, as 'fingerprints' of EN to characterize the electroplating process and the deposit structure. The results also showed that electrochemical noise technique can give more information about the electrodeposit structure than other normal electrochemical measurements, such as linear potential sweep method and cyclic voltammetry technique.
基金supported by the National Basic Research Program of China (No. 2010CB630905)
文摘Zinc concentrate with high gallium content is one of the main resources of gallium.The gallium presents in the form of isomorphism in tetrahedron coordination with sulfur in sphalerite.The research was to investigate the amenability of zinc concentrate with high gallium to pressure oxygen leaching.The particle size,sulfuric acid concentration,oxygen partial pressure,additive amount,and time of reaction were studied.The extraction yields of gallium and zinc are 86%and 98%,respectively.The optimal condition is 100 g of zinc concentrate with particle size smaller than 38 lm,sulfuric acid concentration150 g L-1,leaching temperature 150℃,leaching time120 min,oxygen partial pressure 0.7 MPa,additive amount of 0.2 wt%.
基金Project(20050145029)supported by the Research Fund for the Doctoral Program of Higher Education of ChinaProject(2005221012)supported by Science and Technology Talents Fund for Excellent Youth of Liaoning Province,China
文摘Effects of particle size of the zinc sulfide concentrate,leaching temperature,solid-to-liquid ratio and additive amount on pressure acid leaching process of the zinc sulfide concentrate were studied.The results indicate that the additive can improve the reaction kinetics and the conversion rate.And sulfur can be successfully separated from the zinc sulfide concentrate as elemental sulfur.The reasonable experiment parameters are obtained as follows:the leaching temperature 150℃,oxygen partial pressure 1 MPa,additive amount 1%,solid-to-liquid ratio 1:4,leaching time 2 h,initial sulfuric acid concentration 15%,and particle size less than 44μm.Under the optimum conditions,the leaching rate of the zinc can reach 95%and the reduction rate of the sulfur can reach 90%.