Interphase migration and enrichment of lead and zinc during copper slag depletion

An interphase migration and enrichment model of lead and zinc during molten copper slag depletion was established.The occurrence of various components in copper slag was predicted using sulfur-oxygen potential calculations and confirmed through high-temperature experiments.The recovery rate of copper can reach 90.13%under the optimal conditions of 1200°C,an iron to silicon mass ratio of 1.0,3 wt.%ferrous sulfide,and a duration of 45 min.Lead(54.07 wt.%)and zinc(17.42 wt.%)are found in the flue dust as lead sulfate,lead sulfide,and zinc oxide,while copper matte contains lead(14.44 wt.%)and zinc sulfide(1.29 wt.%).The remaining lead and zinc are encapsulated as oxides within the fayalite phase.

Estimation of lead and zinc emissions from mineral exploitation based on characteristics of lead/zinc deposits in China

Nonferrous mining activities are some of the largest sources of heavy metals emissions into the environment and China is one of the largest producers and consumers of lead and zinc in the world.The cumulative productions and emissions of lead and zinc from mining-related activities in China were estimated.Up to 2007,the cumulative productions of lead and zinc in China were estimated to be about 6.69 and 12.59 Mt,respectively;and about 1.62 Mt lead and 3.32 Mt zinc emitted into the ambient environment during the mining,processing and smelting activities,representing 24.39% and 26.36% cumulative production,respectively.Among these three types of mining-related activities,mineral processing contributes the most to the total emission of 50.67% lead and 45.51% zinc.

Serum Zinc and Copper Level in Juvenile Idiopathic Arthritis (JIA) Patients and Its Correlation with Disease Duration-A Tertiary Hospital Study

Background: Juvenile Idiopathic Arthritis (JIA) is the most prevalent rheumatic disease in children. It is associated with abnormal levels of serum zinc (Zn) and copper (Cu) as during inflammation serum copper concentration increases and zinc decreases. Objective: To assess the serum Zn and Cu levels in different sub-types of JIA patients and their correlation with the disease duration. Methods: This cross-sectional study was conducted over twelve months at the Pediatric Rheumatology Division, Department of Paediatrics, Bangabandhu Sheikh Mujib Medical University. Sixty-nine JIA cases that fulfilled the International League of Association for Rheumatology (ILAR) criteria were taken as cases and age and sex-matched healthy children were considered as controls. The serum Zn and Cu tests were done using the spectrophotometric method with INDIKO PLUS Drug Analyzer. Data were recorded in a pre-designed questionnaire. Data were checked, verified and analyzed manually where continuous variables were analyzed using unpaired t-test and categorical variables using the ANOVA test. Pearson’s correlation coefficient test was used to see the correlation of serum zinc and copper levels with disease duration. Results: Boys were predominant in both case and control groups, with the majority within the 10 to 16-year-age group. Enthesitis-related arthritis (ERA) was the most common subtype followed by sJIA, Oligo JIA, Poly JIA (RF-) and unclassified subtypes. Disease duration was found less than 12 months in 30.4% of JIA patients. Serum analysis revealed a statistically significant reduction in mean zinc levels and increased copper levels in JIA patients compared to controls. This study observed a negative correlation between serum zinc levels and disease duration, whereas serum copper levels exhibited a positive correlation with disease duration. Conclusion: In conclusion, this study revealed that JIA patients exhibit alterations in serum zinc and copper levels. Serum copper levels showed a positive correlation and serum zinc levels showed a negative correlation with the duration of the disease.

Analysis of Oxygen Consumption in Lead and Zinc Metallurgy

This article analyzes the role of oxygen in lead zinc metallurgy,including shortening the metallurgical process,promoting energy conservation and environmental protection,improving metallurgical strength,enhancing raw material adaptability,and enhancing comprehensive recovery efficiency.This article introduces different lead zinc metallurgical processes and their oxygen consumption characteristics,including oxygen enriched side blowing lead smelting,oxygen bottom blowing lead smelting,oxygen enriched top blowing lead smelting,flash smelting lead,oxygen pressure leaching zinc smelting,and atmospheric pressure oxygen leaching zinc smelting.It is pointed out that oxygen enhanced metallurgy is the direction for the transformation and upgrading of lead zinc metallurgy.

METALLOGENIC ANALYSIS OF THE DEXING COPPER-GOLD-LEAD-ZINC POLYMETALLIC DEPOSITS, JIANGXI PROVINCE, CHINA

The paper discusses the tectonic setting of the fortnation of the Dexing giant copper-gold-lead-zinc deposit and its geological features and demonstrates in detail the polygenetic compound mechanism of its formation.

Selective recovery of lead from zinc oxide dust with alkaline Na_2EDTA solution

The selective recovery of lead from the zinc oxide dust using an alkaline Na2EDTA solution was investigated. The effects of temperature, leaching time, Na2EDTA concentration and initial NaOH concentration on the leaching rates of lead and zinc were studied. The following optimized leaching conditions were obtained： liquid-to-solid ratio 5：1 mL/g, stirring speed 650 r/min, Na2EDTA concentration 0.12 mol/L, initial NaOH concentration 0.5 mol/L, leaching temperature 70 ℃, leaching time 120 min. Under the optimized conditions, the average leaching rates of lead, zinc, fluoride and chloride are 89.92%, 0.94%, 62.84% and 90.02%, respectively. The filtrate was used to electrowin lead powders. The average current efficiency of electrowinning is about 93% and lead content is higher than 98% under the conditions of temperature of 60 ℃, current density of 200 A/m2, H3PO4 concentration of 1.5 g/L, and lead ion concentration of above 5 g/L. The consumption of Na2EDTA and the direct current are about respectively 0.218 kg and 0.958 kW·h for per kilogram of lead powder.

Effect of Copper and Zinc on Accumulation of Vitamin E in Wheat Embryo-derived Callus

[Objective] The aim was to study the effect of the content of copper and zinc on in medium the vitamin E accumulation in wheat embryo-dreived callus.[Method] The mathematical models were established to describe the growth kinetics and the vitamin E accumulation in wheat embryo callus cells.With the aim of getting the highest accumulation of the secondary metabolite Vitamin E,the optimal combination of copper and zinc in medium was confirmed by testing.[Result] The results showed that the production of vitamin E in B5 medium reached the highest value with 2.0 mg/mL ZnSO4·7H2O and 0.1 mg/mL CuSO4·5H2O.The fitting degrees of kinetic models of vitamin E accumulation and cell growth were 97.53% and 95.60%,respectively,which indicated good nonlinear relationships.[Conclusion] Both copper and zinc could affect the accumulation of vitamin E in wheat germ callus,and Copper showed more prominent effect than Zn.Synergism existed in low copper and zinc concentration,and the inhibitive effect enhanced with the increase of the concentrations.

Zinc and copper bioaccumulation in fi sh from Laizhou Bay, the Bohai Sea

Abstract Zinc （Zn） and copper （Cu） concentrations were determined in the tissues （muscle, stomach, liver, gills, skin, and gonads） of five commercial fish species （mullet Liza haematocheilus, flathead Platycephalus indicus, mackerel Scomberomorus niphonius, silver pomfret Pampus argenteus, and sea bass Lateolabrax japonicus） from Laizhou Bay in the Bohai Sea. Metal bioaccumulation was highest in the metabolically active tissues of the gonads and liver. Bioconcentration factors for Zn were higher in all tissues （gonads 44.35, stomach 7.73, gills 7.72, liver 5.61, skin 4.88, and muscle 1.63） than the corresponding values for Cu （gonads 3.50, stomach 3.00, gills 1.60, liver 5.43, skin 1.50, and muscle 0.93）. Mackerel tissues accumulated metal to higher concentrations than did other fish species, but bioaccumulation levels were not significantly correlated with the trophic levels of the fish. Zn and Cu concentrations in the tissues were generally negatively correlated with fish length, except for a few tissues of sea bass. Risk assessment based on national and international permissible limits and provisional tolerances for weekly intake of Zn and Cu revealed that the concentrations of these two metals in muscle were relatively low and would not pose hazards to human health.

Investigation on the deactivation cause of lead-zinc double oxide for the synthesis of diphenyl carbonate by transesterification

The deactivation cause of lead-zinc double oxide for synthesis of diphenyl carbonate （DPC） by transesterification of dimethyl carbonate （DMC） with phenol has been investigated. X-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS）, infrared spectroscopy （IR）, thermogravimetry analysis （TG）, atomic absorption spectroscopy and elementary analysis are employed for the catalyst characterization. The results show that, the formation of Pb4O（OC6H5）6 through the reaction of phenol and lead species in the catalyst leads to the crystal phase change of active component and serious leaching of lead, which is the cause of the catalyst deactivation. In addition, the composition of the leached lead is ascertained to be a mixture of Pb4O（OC6H5）6 and PbO with the weight percentage of 62.7% and 37.3%, respectively.

Zinc and Copper Status in Urban Thai PregnantWomen and Their Pregnancy Outcome

Zinc and copper intakes and serum concentrations were determined at the 32th and 36th week of pregnancy in 96 healthy Thai women attending a prenatal clinic. Dietary data from 3-day food records revealed that the mean dietary zinc and copper intakes in Thai pregnant women were 6. 9 and 1. 7mg/d (equivalent to 34 and 69% of Thai RDA), respectively. Fifty-five percent of zinc intake was from animal origin, whereas 59% of copper intake was from plant origin.The infants of the 64 women who were in the study until delivery, were all normal.Most (>96%) of the maternal serum zinc and copper concentrations were within normal ranges. Only one woman at 32th week had low serum zinc level (<6. 4μmol/L). There were no significant correlations between the maternal serum zinc or copper levels and pregnancy outcome (birth weight and birth length). In this study, although the zinc and copper intake in most Thai pregnant women (99 and 58%, respectively) were less than two-thirds of the Thai RDAs, they were not at risk of suffering from zinc and copper deficiencies as determined by serum zine and copper concentrations, abnormal parturition and abnormal pregnancy outcome.

Isotopic Compositions of Sulfur in the Jinshachang Lead–Zinc Deposit, Yunnan, China, and its Implication on the Formation of Sulfur-Bearing Minerals

The Jinshachang lead-zinc deposit is mainly hosted in the Upper Neoproterozoic carbonate rocks of the Dengying Group and located in the Sichuan-Yunnan-Guizhou （SYG） Pb-Zn-Ag multi- metal mineralization area in China. Sulfides minerals including sphalerite, galena and pyrite postdate or coprecipitate with gangue mainly consisting of fluorite, quartz, and barite, making this deposit distinct from most lead-zinc deposits in the SYG. This deposit is controlled by tectonic structures, and most mineralization is located along or near faults zones. Emeishan basalts near the ore district might have contributed to the formation of orebodies. The j34S values of sphalerite, galena, pyrite and barite were estimated to be 3.6‰-13.4‰, 3.7‰-9.0‰, -6.4‰ to 29.2‰ and 32.1‰34.7‰, respectively. In view of the similar δ34S values of barite and sulfates being from the Cambrian strata, the sulfur of barite was likely derived from the Cambrian strata. The homogenization temperatures （T ≈ 134--383℃） of fluid inclusions were not suitable for reducing bacteria, therefore, the bacterial sulfate reduction could not have been an efficient path to generate reduced sulfur in this district. Although thermochemical sulfate reduction process had contributed to the production of reduced sulfur, it was not the main mechanism. Considering other aspects, it can be suggested that sulfur of sulfides should have been derived from magmatic activities. The δ34S values of sphalerite were found to be higher than those of coexisting galena. The equilibrium temperatures calculated by using the sulfur isotopic composition of mineral pairs matched well with the homogenization temperature of fluid inclusions, suggesting that the sulfur isotopic composition in ore-forming fluids had reached a partial equilibrium.

Feasibility of Simultaneous Application of Fuzzy Neural Network and TOPSIS Integrated Method in Potential Mapping of Lead and Zinc Mineralization in Isfahan-Khomein Metallogeny Zone

Iran is located on a silver, lead, and zinc belt and according to the latest studies holds 11 million tons of lead, zinc, and silver stones which constitute 4 percent of global resources. Considering that mineral materials are explored in an uncertain space, exploration investment risk is an inseparable part of these activities. The important fact is to minimize the effect of this undesired factor in exploration. To achieve this, it is required that exploration activities and withdrawals are performed in a certain framework in which risk minimization is considered. Using mineral potential modelling for determining promising zones which should be taken into consideration in more detailed stages could make achieving the purpose possibly. This work is aimed at applying fuzzy neural network and TOPSIS methods simultaneously in order to explore zinc and lead resources. In this article, geological, telemetry, geophysics, and geochemistry data is integrated using fuzzy-neural network (neuro fuzzy) and using TOPSIS method rating for lead and zinc ore deposit potential mapping in Isfahan-Khomein strip which has been introduced as one of zinc and leads mineral scopes in Iran. This area which is composed of several zinc and lead ore deposits has been considered as the target area. Fuzzy integration results of zinc and lead mineralization witness layers confirm the relatively high potential of lead and zinc mineralization in this region having a northwest-southeast trend and involving more than 90 percent of the known indices and ore deposits of the region. In this research, it was shown that the results of TOPSIS-Neuro-Fuzzy integrated model (a combination of neural network and fuzzy logic) have increased the resolution of talented areas from the areas with no mineralization potential in comparison with the fuzzy method individually.

Kinetic Study of Cementation of Copper on Zinc Metal in Ethanol-Water Mixtures

The cementation reaction of copper on zinc metal in solutions of different concentrations ofcopper sulphate, at 25℃, has been studied and it is found to be a first order reaction. Moreover,the rates of this reaction at 0.15 mol'L-1 copper sulphate solution have been measured in a varietyof ethanol-water media at temperatures from 20℃ to 40℃. The correlation between the masstransfer coefficient and the dielectric constant has been investigated. Also, the thermodynamicparameters of activation have been calculated. The isokinetic relationship reveals the existenceof compensation effect, where the solute-solvent interactions play an important role.

A Preliminary Study on Fluid Inclusions and Mineralization of Xitieshan Sedimentary-Exhalative (SEDEX) Lead-Zinc Deposit

The Xitieshan lead-zinc deposit is located at the northern margin of the Qaidam Basin, Qinghai Province, China, and had developed a complete marine sedimentary-exhalative system. Our preliminary study of ore-forming fluids shows that fluid inclusions in quartz from altered stockwork rocks that represent the pipe facies have a wide range of temperature and salinity. The intense fluid activities are characteristics of the pipe facies of the exhalative system. Fluid inclusions in carbonates near the unstratified ore bodies hosted in the thick-bedded marble which represents vent-proximal facies are large in size and have moderate to high temperatures. They represent unerupted sub-seafloor fluid activity. Fluids in altered stockwork rocks and carbonates have similar H20-NaCI-CO2 system, both belonging to the sedimentary-exhalative system. The fluids migrate from the pipe facies to the unstratified ore bodies. Boiling of the fluids causes the separation of CO2 vapor and liquid H2O. When the fluids migrate into the unconsolidated thick-bedded marble, the escape of CO2, decreasing temperature and pressure as well as some involvement of seawater into the fluids result in the unmixing of fluids with high and low salinity and deposition of ore-forming materials. The two unmixed fluids were trapped in unconsolidated carbonates and the ore-forming materials were deposited in the unconsolidated carbonates to form the sedimentary-exhalative type unstratified ore bodies. The oreforming temperature of unstratified ore bodies is up to high temperature indicating that there is a huge ore-forming potential in its deep.

Qinling-Type Lead-Zinc Deposits

Qinling-type Pb-Zn deposits are located in the Qinling fold belt, occurring in the fine-clastic and carbonate rocks of the Devonian marine facies. They are reformed sedimentary deposits originating from hydrothermal waters, and may be subdivided into 2 subtypes: hydrothermal sedimentary deposits (Changba subtype) and reformed hydrothermal sedimentary deposits (Bijiashan-Qiandongshan subtype). In comparison with some of the famous Palaeozoic Pb-Zn deposits in the world, the Qinling-type Pb-Zn deposits constitute an independent type, which possesses some characteristics of both hydrothermal sedimentary deposits (Meggen type) and reformed hydrothermal deposits (Mississippi Valley type).

CLINICAL STUDY ON SERUM COPPER AND ZINC LEVELS AND COPPER/ZINC RATIO IN MALIGNANT LYMPHOMA

173 simultaneous determinations of serum copper levels (SCL), serum zinc levels (SZL) and copper/zinc ratio (CZR) were made by atomic absorption spectrophotometry in 51 previously untreated lymphoma patients. SCL and CZR were significantly higher in patients before treatment (mean value 22.97 μmol/L, 1.55, respectively) and in those who did not reach complete remission (mean 21.21 μmol/L, 1.36) as compared with the patients in complete remission (mean 16.36 μmol/L, 1.06) or normal controls (mean 15.67 μmol/L, 0.98). The mean value of SCL and CZR of patients in complete remission did not differ significantly from those of normal controls. Patients in stages HI and IV had higher SCL and CZR (mean 25.15 μmol/L, 1.79) than those in stage Ⅰ and Ⅱ (mean 19.30 μmol/L, 1.16). No significant difference in SZL was observed between the patient groups and normal controls. Thus, SCL and CZR may be used as prognostic indicators for monitoring disease activity and response to therapy in malignant lymphoma.

Synthesis and Characterization of Dipeptide Schiff Base Complexes of Copper(Ⅱ), Zinc(Ⅱ), Nickel(Ⅱ) and Cobalt(Ⅱ)

A new Schiff base (LK) obtained from 2, 4, -dihydroxybenzaldehyde and glycly-DL- phenylalanine reacted with Cu(II), Zn(II), Ni(II) and Co(II) to yield new complexes. The complexes were characterized by elemental analyses, molar conductance, 1H NMR DTA, TG, IR and UV spectroscopy. In these complexes the ligand is coordinated to the metal through its phenolic oxygen, carboxyl oxygen, imino nitrogen and amide nitrogen. All complexes are non-electrolytes and four coordinated with 1:1(metal; ligand) stoichiometry. The probable structure of the complexes is suggested

Local Structure Analysis of Lead Zinc Niobate-Barium Titanate Ceramic by X-Ray Absorption Spectroscopy and Density Functional Calculation

The local structure of an alternative Pb（Zn1/3Nb2/3）O3-based perovskite ceramic is investigated. The 0.07BaTiO33-0.93Pb（Zn1/3Nb2/3）O3 ceramic is synthesized using a combination of Zn3Nb2O8 B-site precursor and BaTiO33 perovskite phase stabilizer. Then, x-ray absorption spectroscopy and density functional theory are employed to calculate the local structure configuration and formation energy of the prepared samples. Ba2＋ is found to replace Pb2＋ in AA-site with Zn2＋ occupying BB-site in Pb（Zn1/3Nb2/3）O3, while in the neighboring structure, Ti4＋4＋ replaces Nb5＋5＋ in BB-site with Pb2＋2＋ occupying AA-site. With the substitution of BaTiO33 in Pb（Zn1/3Nb2/3）O3, the bond length between Zn2＋ and Pb2＋ is longer than that of the typical perovskite phase of Pb（Zn1/3Nb2/3）O3. This indicates the key role of BaTiO33 in decreasing the steric hindrance of Pb2＋ lone pair, and the mutual interactions between Pb2＋ lone pair and Zn2＋ and the formation energy is seen to decrease. This finding of the formation energy and local structure configuration relationship can further extend a fundamental understanding of the role of BaTiO33 in stabilizing the perovskite phase in PbZn13Nb23O3-based materials, which in turn will lead to an improved preparation technique for desired electrical properties.

Effects of field application of phosphate fertilizers on the availability and uptake of lead, zinc and cadmium by cabbage (Brassica chinensis L.) in a mining tailing contaminated soil

A field trial was conducted to evaluate the reduction of bioavailability of heavy metals including lead (Pb), zinc (Zn) and cadmium (Cd) in a soil contaminated by mining tailings in Shaoxing, Zhejiang, China. Three commercial phosphate (P) fertilizers including phosphate rock (PR), calcium magnesium phosphate (CMP), and single superphosphate (SSP) were applied to the plot at three P application rates, 50, 300, and 500 g/m2 with 9 treatments and control (CK). Plants, water soluble and exchangeable (WE) extra...

Effects of Cadmium, Lead, and Zinc on Size of MicrobialBiomass in Red Soil

A laboratory incubation experiment was conducted to study the influence of cadmium (Cd), lead (Pb)and zinc (Zn) on the size of the microbial biomass in red soil. All the three metals were applied, separately,at five different levels that were: Cd at 5, 15, 30, 60 and 100 μg g-1; Pb at 100, 200, 300, 450 and 600 μg g-1 and Zn at 50, 100, 150, 200 and 250 μg g-1 soil. In comparison to uncontaminated soil, the microbial biomass carbon and biomass nitrogen decreased sharply in soils contaminated with Cd, Ph and Zn. A more considerable increase in the microbial biomass C: N ratio was observed in the metal contaminated soils than the non-treated control. Among the tested metals, Cd displayed the greatest biocidal effect followed by Zn and Pb, showing their relative toxicity in the order of Cd > Zn > Pb.