Double-Doped Carbon-Based Electrodes with Nitrogen and Oxygen to Boost the Areal Capacity of Zinc-Bromine Flow Batteries

Ensuring a stable power output from renewable energy sources,such as wind and solar energy,depends on the development of large-scale and long-duration energy storage devices.Zinc–bromine fl ow batteries(ZBFBs)have emerged as cost-eff ective and high-energy-density solutions,replacing expensive all-vanadium fl ow batteries.However,uneven Zn deposition during charging results in the formation of problematic Zn dendrites,leading to mass transport polarization and self-discharge.Stable Zn plating and stripping are essential for the successful operation of high-areal-capacity ZBFBs.In this study,we successfully synthesized nitrogen and oxygen co-doped functional carbon felt(NOCF4)electrode through the oxidative polymerization of dopamine,followed by calcination under ambient conditions.The NOCF4 electrode eff ectively facilitates effi cient“shuttle deposition”of Zn during charging,signifi cantly enhancing the areal capacity of the electrode.Remarkably,ZBFBs utilizing NOCF4 as the anode material exhibited stable cycling performance for 40 cycles(approximately 240 h)at an areal capacity of 60 mA h/cm^(2).Even at a high areal capacity of 130 mA h/cm^(2),an impressive energy effi ciency of 76.98%was achieved.These fi ndings provide a promising pathway for the development of high-areal-capacity ZBFBs for advanced energy storage systems.

Reversible solid-liquid conversion enabled by self-capture effect for stable non-flow zinc-bromine batteries

Non-flow aqueous zinc-bromine batteries without auxiliary components(e.g.,pumps,pipes,storage tanks)and ion-selective membranes represent a cost-effective and promising technology for large-scale energy storage.Unfortunately,they generally suffer from serious diffusion and shuttle of polybromide(Br^(-),Br^(3-))due to the weak physical adsorption between soluble polybromide and host carbon materials,which results in low energy efficiency and poor cycling stability.Here,we develop a novel self-capture organic bromine material(1,10-bis[3-(trimethylammonio)propyl]-4,4'-bipyridinium bromine,NVBr4)to successfully realize reversible solid complexation of bromide components for stable non-flow zinc-bromine battery applications.The quaternary ammonium groups(NV^(4+)ions)can effectively capture the soluble polybromide species based on strong chemical interaction and realize reversible solid complexation confined within the porous electrodes,which transforms the conventional“liquid-liquid”conversion of soluble bromide components into“liquid-solid”model and effectively suppresses the shuttle effect.Thereby,the developed non-flow zinc-bromide battery provides an outstanding voltage platform at 1.7 V with a notable specific capacity of 325 mAh g^(-1)NVBr4(1 A g^(-1)),excellent rate capability(200 mAh g^(-1)NVBr4 at 20 A g^(-1)),outstanding energy density of 469.6 Wh kg^(-1)and super-stable cycle life(20,000 cycles with 100%Coulombic efficiency),which outperforms most of reported zinc-halogen batteries.Further mechanism analysis and DFT calculations demonstrate that the chemical interaction of quaternary ammonium groups and bromide species is the main reason for suppressing the shuttle effect.The developed strategy can be extended to other halogen batteries to obtain stable charge storage.

Progress and prospects of pH-neutral aqueous organic redox flow batteries:Electrolytes and membranes

Aqueous organic redox flow batteries(AORFBs),which exploit the reversible electrochemical reactions of water-soluble organic electrolytes to store electricity,have emerged as an efficient electrochemical energy storage technology for the grid-scale integration of renewable electricity.pH-neutral AORFBs that feature high safety,low corrosivity,and environmental benignity are particularly promising,and their battery performance is significantly impacted by redox-active molecules and ion-exchange membranes(IEMs).Here,representative anolytes and catholytes engineered for use in pH-neutral AORFBs are outlined and summarized,as well as their side reactions that cause irreversible battery capacity fading.In addition,the recent achievements of IEMs for pH-neutral AORFBs are discussed,with a focus on the construction and tuning of ion transport channels.Finally,the critical challenges and potential research opportunities for developing practically relevant pH-neutral AORFBs are presented.

Steric hindrance shielding viologen against alkali attack in realizing ultrastable aqueous flow batteries

Viologens known as a kind of promising negolyte materials for aqueous organic redox flow batteries,face a critical stability challenge due to the S_N2 nucleophilic attack by hydroxide ions(OH-)during the battery cycling.In this work,a N-cyclic quaternary ammonium-grafted viologen molecule,viz.1,1'-bis(4,4'-dime thylpiperidiniumyl)-4,4'-bipyridinium tetrachloride((DBPPy)Cl_(4)),is developed by the molecular engineering strategy.The obtained(DBPPy)Cl_(4) molecule shows a decent solubility of 1.84 M and a redox potential of-0.52 V vs.Ag/AgCl,Experimental and theoretical results reveal that the grafted N-cyclic quaternary ammonium groups act as the steric hindrance to prevent nucleophilic attack by OH~-,increasing the alkali resistance of the electroactive molecule.The symmetrical battery with 0.50 M(DBPPy)Cl4shows negligible decay during the 13-day cycling test.As demonstration,the flow battery utilizing 1.0 M(DBPPy)Cl_(4) as the negolyte and 1-(1-oxyl-2,2',6,6'-tetramethylpiperidin-4-yl)-1'-(3-(trimethylammonio)propyl)-4,4'-bipyridinium trichloride as the posolyte exhibits a high capacity retention rate of 99.99%per cycle at 60 mA cm^(-2).

Implications of electrode modifications in aqueous organic redox flow batteries

Aqueous organic redox flow batteries(RFBs)exhibit favorable characteristics,such as tunability,multielectron transfer capability,and stability of the redox active molecules utilized as anolytes and catholytes,making them very viable contenders for large-scale grid storage applications.Considerable attention has been paid on the development of efficient redox-active molecules and their performance optimization through chemical substitutions at various places on the backbone as part of the pursuit for high-performance RFBs.Despite the fact that electrodes are vital to optimal performance,they have not garnered significant attention.Limited research has been conducted on the effects of electrode modifications to improve the performance of RFBs.The primary emphasis has been given on the impact of electrode engineering to augment the efficiency of aqueous organic RFBs.An overview of electron transfer at the electrode-electrolyte interface is provided.The implications of electrode modification on the performance of redox flow batteries,with a particular focus on the anodic and cathodic half-cells separately,are then discussed.In each section,significant discrepancies surrounding the effects of electrode engineering are thoroughly examined and discussed.Finally,we have presented a comprehensive assessment along with our perspectives on the future trajectory.

Insights into the hydrogen evolution reaction in vanadium redox flow batteries:A synchrotron radiation based X-ray imaging study

The parasitic hydrogen evolution reaction(HER)in the negative half-cell of vanadium redox flow batteries(VRFBs)causes severe efficiency losses.Thus,a deeper understanding of this process and the accompanying bubble formation is crucial.This benchmarking study locally analyzes the bubble distribution in thick,porous electrodes for the first time using deep learning-based image segmentation of synchrotron X-ray micro-tomograms.Each large three-dimensional data set was processed precisely in less than one minute while minimizing human errors and pointing out areas of increased HER activity in VRFBs.The study systematically varies the electrode potential and material,concluding that more negative electrode potentials of-200 m V vs.reversible hydrogen electrode(RHE)and lower cause more substantial bubble formation,resulting in bubble fractions of around 15%–20%in carbon felt electrodes.Contrarily,the bubble fractions stay only around 2%in an electrode combining carbon felt and carbon paper.The detected areas with high HER activity,such as the border subregion with more than 30%bubble fraction in carbon felt electrodes,the cutting edges,and preferential spots in the electrode bulk,are potential-independent and suggest that larger electrodes with a higher bulk-to-border ratio might reduce HER-related performance losses.The described combination of electrochemical measurements,local X-ray microtomography,AI-based segmentation,and 3D morphometric analysis is a powerful and novel approach for local bubble analysis in three-dimensional porous electrodes,providing an essential toolkit for a broad community working on bubble-generating electrochemical systems.

Organized macro-scale membrane size reduction in vanadium redox flow batteries:Part 1.General concept

The high costs of the currently used membranes in vanadium redox flow batteries(VRFBs)contribute to the price of the vanadium redox flow battery systems and therefore limit the market share of the VRFBs.Here we report a detailed simulation and experimental studies on the effect of membrane reduction of single-cell VRFB.Different simulated designs demonstrate that a proposed centred and double-strip membrane coverage showed a promising performance.Experimental charge-discharge profile of different membrane size reduction,which showed good agreement with simulated data,suggests that the membrane size can comfortably be reduced by up to 20%without severe efficiency or discharge capacity loss.Long-term cycling of 80%centred membrane coverage showed improved capacity retention during the latter cycles with almost 1%difference in capacity and only 2%in energy efficiency when compared to the fully covered-membrane cell.The results hold great promise for the development of cheap RFB stacks and facilitate the way to develop new cell designs with non-overlapping electrodes geometry.Therefore,giving more flexibility to improve the overall performance of the system.

Soft Template-Induced Porous Polyvinylidene Fluoride Membrane for Vanadium Flow Batteries

Vanadium flow batteries(VFBs)are considered ideal for grid-sc ale,long-duration energy storage applications owing to their decoupled output power and storage capacity,high safety,efficiency,and long cycle life.However,the widespread adoption of VFB s is hindered by the use of expensive Nafion membranes.Herein,we report a soft template-induced method to develop a porous polyvinylidene fluoride(PVDF)membrane for VFB applications.By incorporating water-soluble and flexible polyethylene glycol(PEG 400)as a soft template,we induced the aggregation of hydrophilic sulfonated poly(ether ether ketone),resulting in phase separation from the hydrophobic PVDF polymer during membrane formation.This process led to the creation of a porous PVDF membrane with controllable morphologies determined by the polyethylene glycol content in the cast solution.The optimized porous PVDF membrane enabled a stable VFB performance for 200 cycles at a current density of 80 mA/cm^(2),and the VFB exhibited a Coulombic efficiency of 95.2%and a voltage efficiency of 87.8%.These findings provide valuable insights for the development of highly stable membranes for VFB applications.

A low-cost bromine-fixed additive enables a high capacity retention zinc-bromine batteries

In recent years,more and more efforts are devoting to clean energy,renewable energies in particular to achieving net zero carbon dioxide emissions[1].However,renewable energies,like solar power and wind power,are generally intermittent and random,hindering their wide application[2,3].To address this problem,there is an urgent need in effective and reliable energy storage device.

Lattice Boltzmann modeling of transport phenomena in fuel cells and flow batteries

Fuel cells and flow batteries are promising technologies to address climate change and air pollution problems. An understanding of the complex multiscale and multiphysics transport phenomena occurring in these electrochemical systems requires powerful numerical tools. Over the past decades, the lattice Boltzmann (LB) method has attracted broad interest in the computational fluid dynamics and the numerical heat transfer communities, primarily due to its kinetic nature making it appropriate for modeling complex multiphase transport phenomena. More importantly, the LB method fits well with parallel computing due to its locality feature, which is required for large-scale engineering applications. In this article, we review the LB method for gas-liquid two-phase flows, coupled fluid flow and mass transport in porous media, and particulate flows. Examples of applications are provided in fuel cells and flow batteries. Further developments of the LB method are also outlined.

A review of electrolyte additives and impurities in vanadium redox flow batteries

As one of the most important components of the vanadium redox flow battery （VRFB）, the electrolyte can impose a significant impact on cell properties, performance and capital cost. In particular, the electrolyte composition will influence energy density, operating temperature range and the practical applications of the VRFB. Various approaches to increase the energy density and operating temperature range have been proposed. The presence of electrolyte impurities, or the addition of a small amount of other chemical species into the vanadium solution can alter the stability of the electrolyte and influence cell perfor- mance, operating temperature range, energy density, electrochemical kinetics and cost effectiveness. This review provides a detailed overview of research on electrolyte additives including stabilizing agents, im- mobilizing agents, kinetic enhancers, as well as electrolyte impurities and chemical reductants that can be used for different purposes in the VRFBs.

Modified carbon cloth as positive electrode with high electrochemical performance for vanadium redox flow batteries

Carbon cloth modified by hydrothermal treatment in ammonia water is developed as the positive electrode with high electrochemical performance for vanadium redox flow batteries. The SEM shows that the treatment has no obvious influence on the morphology of carbon cloth. XPS measurements indicate that the nitrogenous functional groups can be introduced on the surface of carbon cloth successfully. The electrochemical performance of V(IV)/V(V) redox couple on the prepared electrode is evaluated with cyclic voltammetry and linear sweep voltammetry measurements. The N-doped carbon cloth exhibits outstanding electrochemical activity and reversibility toward V(IV)/V(V) redox couple. The rate constant of V(IV)/V(V) redox reaction on carbon cloth can increase to 2.27 x 10(-4) cm/s from 1.47 x 10(-4) cm/s after nitrogen doping. The cell using N-doped carbon cloth as positive electrode has larger discharge capacity and higher energy efficiency compared with the cell using pristine carbon cloth. The average energy efficiency of the cell using N-doped carbon cloth for 50 cycles at 30 mA/cm(2) is 87.8%, 4.3% larger than that of the cell using pristine carbon cloth. It indicates that the N-doped carbon cloth has a promise application prospect in vanadium redox flow batteries. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.

Progress on the electrode materials towards vanadium flow batteries (VFBs) with improved power density

The vanadium flow battery （VFB） has been considered as one of the most promising large-scale energy storage technologies in terms of its design flexibility, long cycle life, high efficiency and high safety. How- ever, the high cost prevents the VFB technology from broader market penetration. Improving the power density of the VFB is an effective solution to reduce its cost due to the reduced material consumption and stack size. Electrode, as one of the main components in the VFB, providing the reactions sites for redox couples, has an important effect on the voltage loss of the VFB associated with electrochemical polariza- tion, ohmic polarization and concentration polarization. Extensive research has been carried out on the electrode modification to reduce polarizations and hence improve the power density of the VFB. In this review, state-of-the-art of various modification methods on the VFB electrode materials is overviewed and summarized, and the future research directions helpful to reduce polarization loss are presented.

The catalytic effect of bismuth for VO2+/VO2+and V3+/V2+redox couples in vanadium flow batteries

The effect of bismuth (Bi) for both VO2+/VO2+ and V3+/V2+ redox couples in vanadium flow batteries (VFBs) has been investigated by directly introducing Bi on the surface of carbon felt (CF). The results show that Bi has no catalytic effect for VO2+/VO2(+) redox couple. During the first charge process, Bi is oxidized to Bi3+ (never return back to Bi metal in the subsequent cycles) due to the low standard redox potential of 0.308 V (vs. SHE) for Bi3+/Bi redox couple compared with VO2+/VO2+ redox couple and Bi3+ exhibit no (or neglectable) electro-catalytic activity. Additionally, the relationship between Bi loading and electrochemical activity for V3+/V2+ redox couple was studied in detail. 2 wt% Bi-modified carbon felt (2%-BiCF) exhibits the highest electrochemical activity. Using it as negative electrode, a high energy efficiency (EE) of 79.0% can be achieved at a high current density of 160 mA/cm(2), which is 5.5% higher than the pristine one. Moreover, the electrolyte utilization ratio is also increased by more than 30%. Even the cell operated at 140 mA/cm(2) for over 300 cycles, the EE can reach 80.9% without obvious fluctuation and attenuation, suggesting excellent catalytic activity and electrochemical stability in VFBs. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.

Glucose-derived hydrothermal carbons as energy storage booster for vanadium redox flow batteries

Fabricating of high performance electrodes by a sustainable and cost effective method is essential to the development of vanadium redox flow batteries(VRFBs).In this work,an effective strategy is proposed to deposit carbon nanoparticles on graphite felts by hydrothermal carbonization method.This in-situ method minimizes the drop off and aggregation of carbon nanoparticles during electrochemical testing.Such integration of felts and hydrothermal carbons(HTC)produces a new electrode that combines the outstanding electrical conductivity of felts with the effective redox active sites provided by the HTC coating layer.The presence of the amorphous carbon layers on the felts is found to be able to promote the mass/charge transfer,and create oxygenated/nitrogenated active sites and hence enhances wettability.Consequently,the most optimized electrode based on a rational approach delivers an impressive electrochemical performance toward VRFBs in wide range of current densities from 200 to 500 mAcm^-2.The voltage efficiency(VE)of GFs-HTC is much higher than the VEs of the pristine GFs,especially at high current densities.It exhibits a 4.18 times increase in discharge capacity over the pristine graphite felt respectively,at a high current density of 400 mAcm^-2.The enhanced performance is attributed to the abundant active sites from amorphous hydrothermal carbon,which facilitates the fast electrochemical kinetics of vanadium redox reactions.This work evidences that the glucose-derived hydrothermal carbons as energy storage booster hold great promise in practical VRFBs application.

Redox catalysts for aprotic Li-O2 batteries: Toward a redox flow system

Large-scale electrical energy storage with high energy density and round-trip efficiency is important to the resilience of power grids and the effective use of intermittent renewable energy such as solar and wind.Lithiumoxygen battery,due to its high energy density,is believed to be one of the most promising energy storage systems for the future.However,large overpotentials,poor cycling stability,and degradation of electrolytes and cathodes have been hindering the development of lithium-oxygen batteries.Numerous heterogeneous oxygen electrocatalysts have been investigated to lower the overpotentials and enhance the cycling stability of lithium-oxygen batteries.Unfortunately,the prevailing issues of electrode passivation and clogging remain.Over the past few years,redox mediators were explored as homogenous catalysts to address the issues,while only limited success has been achieved for these soluble catalysts.In conjunction with a flowing electrolyte system,a new redox flow lithium-oxygen battery(RFLOB)has been devised to tackle the aforementioned issues.The working mechanism and schematic processes will be elaborated in this review.In addition,the performance gap of RFLOB with respect to practical requirements will be analysed.With the above,we anticipate RFLOB would be a credible solution for the implementation of lithium-oxygen battery chemistry for the next generation energy storage.

ZIF-derived holey electrode with enhanced mass transfer and N-rich catalytic sites for high-power and long-life vanadium flow batteries

Electrode materials with good redox kinetics,excellent mass transfer characteristics and ultra-high stability play a crucial role in reducing the life-cycle cost and prolonging the maintenance-free time of the vanadium flow batteries(VFB).Herein,a nitrogen-doped porous graphite felt electrode(N-PGF)is proposed by growing ZIF-67 nanoparticles on carbon fibers and then calcinating and acid etching.The multi-scale structure of“carbon fiber gap(electrolyte flow),micro/nano pore(active species diffusion)and Nitrogen active center(reaction site)”in N-PGF electrode effectively increases the catalytic sites and promotes mass transfer characteristics.Reasonable electrode design makes the battery show excellent rate performance and ultra-high cycling stability.The peak power density of the battery reaches 1006 mW cm^(-2).During 1000 cycles at 150 mA cm^(-2),the average discharge capacity and average discharge energy of N-PGF increase substantially by 11.6%and 23.4%compared with the benchmark thermal activated graphite felt,respectively.More excitingly,after ultra-long term(5000 cycles)operation at an ultra-high current density(300 mA cm^(-2)),N-PGF exhibits an unprecedented energy efficiency retention(99.79%)and electrochemical performance stability.

O/N/S trifunctional doping on graphite felts:A novel strategy toward performance boosting of cerium-based redox flow batteries

The cerium-based redox flow battery(RFB)is regarded as a compelling gridscale energy storage technology to revolutionize the utilization of renewable energy by storing the energy in liquid electrolytes.However,its widespread implementation is impeded by the cerium redox reactions that exhibit slow kinetics on commercial graphite felt(GF)electrodes.Surface functionalization may be an available activation strategy to achieve a significant boost in the electrochemical performance of GFs.However,conventional chemical and/or electrochemical routes for the surface functionalization of GFs suffer from the issues of complication,and the deterioration of the resulting modified electrode surface over long-term cycle processes leads to catalytic activity decline.Here,we develop a facile and general strategy for introducing the functional groups to the electrode through the addition of L-cysteine into electrolytes.The-COOH,-NH_(2),and-SH groups in L-cysteine can induce oxygen/nitrogen/sulfur trifunctional doping on GF surfaces with lower deterioration rates,which enables the activated GFs to demonstrate a promising electrocatalytic activity toward cerium redox reactions and excellent durability when used as a cerium-based RFB electrode.This study proposes a rational strategy to overcome the intrinsic limitations of existing modification techniques for GFs and provides a potential pathway toward high-performance RFBs.

Redox flow batteries based on insoluble redox-active materials.A review

The ever-increasing demand for energy has stimulated the development of economical non-fossil fuels.As representative of clean energy,solar and wind have been identified as the most promising energy sources due to their abundance,cost efficiency,and environmental friendliness.The intrinsic intermittent of the clean energy leads to the urgent requirements large-scale energy storage technique.Redox flow batteries(RFBs)are attractive technology due to their independent control over energy and power.Insoluble redox-active flow battery is a new type of electrochemical energy storage technology that disperses redox-active particles in the electrolyte.Compared with traditional flow batteries,insoluble flow batteries have advantages of large energy density and are very promising in the development of large-scale energy storage systems.At present,three types of insoluble flow batteries have been explored:slurry-based flow batteries,metal/slurry hybrid,and redox-mediator-assisted flow batteries.This Review summarizes the research progress of insoluble flow batteries,and analyzes the key challenges from the fundamental research and practical application perspectives.

Systematic approaches to improving the performance of polyoxometalates in non-aqueous redox flow batteries

Polyoxometalates have been explored as multi-electron active species in both aqueous and non-aqueous redox flow batteries. Although non-aqueous systems in principle offer a wider voltage window for redox flow battery operation, realization of this potential requires a judicious choice of solvent as well as polyoxometalate properties. We demonstrate here the superior performance of N,N-dimethylformamide(DMF)compared to acetonitrile as a solvent for redox flow batteries based on Li3PMo12O40. This compound displays two 1-electron transfers in acetonitrile but can access an extra quasi-reversible 2-electron redox process in DMF. A cell containing 10 mM solution of Li3PMo12O40 in DMF produced a cell voltage of 0.7 V with 2-electron transfers(State of Charge = 60%) and showed a good cyclability. As a means to boost energy density, operation of the redox flow battery at a higher concentration of 0.1 M Li3PMo12O40 produced cells with cell voltage of 0.6 V in acetonitrile and a cell voltage of 1.0 V in DMF;both showed excellent coulombic efficiencies of more than 90% over the course of 30 cycles. Energy density was also increased by employing an asymmetric cell with different polyoxometalates on each side to extend cell voltage.Li6P2W18O62 exhibited 3 quasi-reversible 2-electron transfers in the potential range between-2.05 V and-0.5 V vs. Ag/Ag+. 10 mM Li6P2W18O62/Li3PMo12O40 in DMF produced a cell with cell voltage of 1.3 V involving 4-electron transfers(State of Charge = 50%) with coulombic efficiency of nearly 100% and energy efficiency of nearly 70% throughout the test with more than 20 cycles. These promising results demonstrate proof-of-concept approaches to improving the performance of polyoxometalates in non-aqueous redox flow batteries.