The zinc-containing dust was oxidatively pretreated with calcium hypochlorite,subsequently leached with ammonia/ammonium bicarbonate solution to obtain the ammoniacal leaching solution,and zinc oxide was produced by a...The zinc-containing dust was oxidatively pretreated with calcium hypochlorite,subsequently leached with ammonia/ammonium bicarbonate solution to obtain the ammoniacal leaching solution,and zinc oxide was produced by ammonia distillation of the ammoniacal leaching solution and subsequent calcination. The elements of iron and manganese could not be detected in ammoniacal leaching solution,and the extraction rate of zinc was 98.2% in ammoniacal leaching process. The zinc oxide content in the product is 99.5%(ω),and the contents of iron and manganese in the product were 0.002 8‰ and 0.000 84‰(ω), respectively. The analyses of the valence states of iron and manganese in the zinc-containing dust with and without pretreatment were performed by chemical analysis and XPS,and the possible oxidation mechanism of the oxidative pretreatment of the dust was discussed. It is concluded that Fe 2+-oxide and Mn 2+-oxide in the dust were oxidized to Fe 3+-oxide and/or its hydrate and Mn 4+-oxide and/or its hydrate by calcium hypochlorite during the oxidative pretreatment process,respectively.展开更多
A mathematical model was established to describe the direct reduction of pellets in a rotary hearth furnace (RHF). In the model, heat transfer, mass transfer, and gas-solid chemical reactions were taken into account...A mathematical model was established to describe the direct reduction of pellets in a rotary hearth furnace (RHF). In the model, heat transfer, mass transfer, and gas-solid chemical reactions were taken into account. The behaviors of iron metallization and dezincification were analyzed by the numerical method, which was validated by experimental data of the direct reduction of pellets in a Si-Mo furnace. The simulation results show that if the production targets of iron metallization and dezincification are up to 80% and 90%, respectively, the furnace temperature for high-temperature sections must be set higher than 1300~ C. Moreover, an undersupply of secondary air by 20% will lead to a decline in iron metallization rate of discharged pellets by 10% and a decrease in dezincing rate by 13%. In addition, if the residence time of pellets in the furnace is over 20 min, its further extension will hardly lead to an obvious increase in production indexes under the same furnace temperature curve.展开更多
The flame propagation processes of MgH_(2)dust clouds with four different particle sizes were recorded by a high-speed camera.The dynamic flame temperature distributions of MgH_(2)dust clouds were reconstructed by the...The flame propagation processes of MgH_(2)dust clouds with four different particle sizes were recorded by a high-speed camera.The dynamic flame temperature distributions of MgH_(2)dust clouds were reconstructed by the two-color pyrometer technique,and the chemical composition of solid combustion residues were analyzed.The experimental results showed that the average flame propagation velocities of 23μm,40μm,60μm and 103μm MgH_(2)dust clouds in the stable propagation stage were 3.7 m/s,2.8 m/s,2.1 m/s and 0.9 m/s,respectively.The dust clouds with smaller particle sizes had faster flame propagation velocity and stronger oscillation intensity,and their flame temperature distributions were more even and the temperature gradients were smaller.The flame structures of MgH_(2)dust clouds were significantly affected by the particle sinking velocity,and the combustion processes were accompanied by micro-explosion of particles.The falling velocities of 23μm and 40μm MgH_(2)particles were 2.24 cm/s and 6.71 cm/s,respectively.While the falling velocities of 60μm and 103μm MgH_(2)particles were as high as 15.07 cm/s and 44.42 cm/s,respectively,leading to a more rapid downward development and irregular shape of the flame.Furthermore,the dehydrogenation reaction had a significant effect on the combustion performance of MgH_(2)dust.The combustion of H_(2)enhanced the ignition and combustion characteristics of MgH_(2)dust,resulting in a much higher explosion power than the pure Mg dust.The micro-structure characteristics and combustion residues composition analysis of MgH_(2)dust indicated that the combustion control mechanism of MgH_(2)dust flame was mainly the heterogeneous reaction,which was affected by the dehydrogenation reaction.展开更多
Dust removal from pyrolytic vapors at high temperatures is an obstacle to the industrialization of the coal pyrolysis process.In this work,a granular bed with expanded perlites as filtration media was designed and int...Dust removal from pyrolytic vapors at high temperatures is an obstacle to the industrialization of the coal pyrolysis process.In this work,a granular bed with expanded perlites as filtration media was designed and integrated into a 10 t·d^(–1)coal pyrolysis facility.The testing results showed that around 97.56%dust collection efficiency was achieved.As a result,dust content in tar was significantly lowered.The pressure drop of the granular bed maintained in the range of 356 Pa to 489 Pa.The dust size in the effluent after filtration exhibited a bimodal distribution,which was attributed to the heterogeneity of the dust components.The effects of filtration bed on pyrolytic product yields were also discussed.A modified filtration model based on the macroscopic phenomenological theory was proposed to describe the performance of the granular bed.The computation results were well agreed with the experimental data.展开更多
The driven-dissipative Langevin dynamics simulation is used to produce a two-dimensional(2D) dense cloud, which is composed of charged dust particles trapped in a quadratic potential. A 2D mesh grid is built to analyz...The driven-dissipative Langevin dynamics simulation is used to produce a two-dimensional(2D) dense cloud, which is composed of charged dust particles trapped in a quadratic potential. A 2D mesh grid is built to analyze the center-to-wall dust density. It is found that the local dust density in the outer region relative to that of the inner region is more nonuniform,being consistent with the feature of quadratic potential. The dependences of the global dust density on equilibrium temperature, particle size, confinement strength, and confinement shape are investigated. It is found that the particle size, the confinement strength, and the confinement shape strongly affect the global dust density, while the equilibrium temperature plays a minor effect on it. In the direction where there is a stronger confinement, the dust density gradient is bigger.展开更多
This paper introduces the method of coal dust treatment in crushing station and the present situation of dust removal system in typical open-pit coal mine crushing station in China,and expounds the research idea of de...This paper introduces the method of coal dust treatment in crushing station and the present situation of dust removal system in typical open-pit coal mine crushing station in China,and expounds the research idea of determining comprehensive dust removal(suppression)system in crushing station inspired by the working principle of"range hood".Based on the design example and link optimization of the crush-ing station of open-pit coal mine I of Thar coalfield,this paper finally draws some conclusions on the key technologies of dust removal(suppression)system of open-pit coal mine crushing station.This study has certain reference value for the technical innovation of dust removal(suppression)system in crushing station,the realization of green mining in"crushing link",and the reduction and avoidance of ecological environment pollution in mining area.展开更多
Evaluation of assessment of the metal processes governing the metals distribution in soil and dust samples is very significant and protects the health of human and ecological system. Recently, special attention has gi...Evaluation of assessment of the metal processes governing the metals distribution in soil and dust samples is very significant and protects the health of human and ecological system. Recently, special attention has given to the assessment of metals pollution impact on soil and dust within industrial areas. This study aims to assess the metal contamination levels in the topsoil and street dust around the cement factory in Qadissiya area, southern Jordan. The levels of seven metals (namely Fe, Zn, Cu, Pb, Cr, Cd, and Mn) were analyzed using Flame Atomic Absorption Spec-trophotometer (FAAS) to monitor, evaluate, and to compare topsoil and road dust pollution values of metals of the different types of urban area. The physicochemical parameters which believed to affect the mobility of metals in the soil of the study area were determined such as pH, EC, TOM, CaCO3 and CEC. The levels of metal in soil samples are greater on the surface but decrease in the lower part as a result of the basic nature of soil. The mean values of the metals in soil can be arranged in the following order: Zn > Pb > Mn > Fe > Cu > Cr > Cd. The relatively high concentration of metals in the soil sample was attributed to anthropogenic activities such as traffic emissions, cement factory and agricultural activities. Correlation coefficient analysis and the spatial distribution of indices and the results of statistical analysis indicate three groups of metals: Fe and Mn result by natural origin, Zn, Pb, Cu and Zn result by anthropogenic origin (mainly motor vehicle traffic and abrasion of tires) while Cd is mixed origin. The higher content level values of metals of anthropogenic source in soil samples indicate that it is a source of contamination of air in the studied area. .展开更多
Given the increasing number of countries reporting degraded air quality,effective air quality monitoring has become a critical issue in today’s world.However,the current air quality observatory systems are often proh...Given the increasing number of countries reporting degraded air quality,effective air quality monitoring has become a critical issue in today’s world.However,the current air quality observatory systems are often prohibitively expensive,resulting in a lack of observatories in many regions within a country.Consequently,a significant problem arises where not every region receives the same level of air quality information.This disparity occurs because some locations have to rely on information from observatories located far away from their regions,even if they may be the closest available options.To address this challenge,a novel approach that leverages machine learning and deep learning techniques to forecast fine dust concentrations was proposed.Specifically,continuous location features in the form of latitude and longitude values were incorporated into our models.By utilizing a comprehensive dataset comprising weather conditions,air quality measurements,and location properties,various machine learning models,including Random Forest Regression,XGBoost Regression,AdaBoost Regression,and a deep learning model known as Long Short-Term Memory(LSTM)were trained.Our experimental results demonstrated that the LSTM model outperforms the other models,achieving the best score with a root mean squared error of 23.48 in predicting fine dust(PM10)concentrations on an hourly basis.Furthermore,the fact that incorporating location properties,such as longitude and latitude values,enhances the overall quality of the regression models was discovered.Additionally,the implications and contributions of our research were discussed.By implementing our approach,the cost associated with relying solely on existing observatories can be substantially reduced.This reduction in costs can pave the way for economically efficient fine dust observation systems,ensuring more widespread and accurate air quality monitoring across different regions.展开更多
Polycyclic aromatic hydrocarbons(PAHs),PANHs,and peptoids dust spectral calculations from the interstellar medium(ISM)are important for dust observations and theory.Our goal is to calculate the radiation spectrum of s...Polycyclic aromatic hydrocarbons(PAHs),PANHs,and peptoids dust spectral calculations from the interstellar medium(ISM)are important for dust observations and theory.Our goal is to calculate the radiation spectrum of spherical PAHs dust clusters in a vacuum containing ionized and applied in the presence of an electric field.We propose a new simple computational model to calculate the size of three-dimensional spherical dust clusters formed by different initial dust structures.By the Vienna Ab-initio Simulation Package code,the density functional theory with the generalized approximation was used to calculate the electron density gradient and obtain the radiation spectrum of dust.When the radius of spherical dust clusters is~[0.009-0.042]μm,the dust radiation spectrum agrees well with the Z=0.02 mMMP stellar spectra,and the PAHs radiation spectrum of NGC 4676 at wavelengths of(0-5]μm and(5-10]μm,respectively.In the ionized state,the N-PAH,C_(10)H_(9)N,2(C_(4)H_(4))^(1+),and peptoids 4(CHON),(C_(8)H_(10)N_(2)O_(5))^(1+)dust clusters at 3.3μm,while the 2(C_(22)H_(21)N_(3)O_(2))^(1+),4(CHON)dust clusters at 5.2μm have obvious peaks.There is a characteristic of part of PAHs and peptoids clusters radiation at the nearinfrared wavelength of 2μm.However,especially after applying an electric field to the dust,the emission spectrum of the dust increases significantly in the radiation wavelength range[3-10]μm.Consequently,the dust clusters of PAHs,PANHs,and peptoids of the radius size~[0.009-0.042]μm are likely to exist in the ISM.展开更多
Dust deposition on the surface of photovoltaic (PV) cells poses a significant challenge to their efficiency, especially in arid regions characterized by desert and semi-desert conditions. Despite the pronounced impact...Dust deposition on the surface of photovoltaic (PV) cells poses a significant challenge to their efficiency, especially in arid regions characterized by desert and semi-desert conditions. Despite the pronounced impact of dust accumulation, these regions offer optimal solar radiation and minimal cloud cover, making them ideal candidates for widespread PV cell deployment. Various surface cleaning methods exist, each employing distinct approaches. Choosing an appropriate cleaning method requires a comprehensive understanding of the mechanisms involved in both dust deposition on module surfaces and dust adhesion to PV cell surfaces. The mechanisms governing dust deposition and adhesion are complex and multifaceted, influenced by factors such as the nature and properties of the dust particles, environmental climatic conditions, characteristics of protective coatings, and the specific location of the PV installation. These factors exhibit regional variations, necessitating the implementation of diverse cleaning approaches tailored to the unique conditions of each location. The first part of this article explores the factors influencing dust deposition on PV cell surfaces, delving into the intricate interplay of environmental variables and particle characteristics. Subsequently, the second part addresses various cleaning methods, offering an analysis of their respective advantages and disadvantages. By comprehensively examining the factors influencing dust accumulation and evaluating the effectiveness of different cleaning strategies, this article aims to contribute valuable insights to the ongoing efforts to optimize the performance and longevity of photovoltaic systems in diverse geographical contexts.展开更多
To improve the poor efficiency of the dust removal system in the plasma cutting station of automotive longitudinal beams,and reduce the cutting surface quality degradation due to dust,a bottom-side suction dust remova...To improve the poor efficiency of the dust removal system in the plasma cutting station of automotive longitudinal beams,and reduce the cutting surface quality degradation due to dust,a bottom-side suction dust removal system is designed,and the dust removal effect is optimized through the setting of the following dampers and diversion plates.The result of numerical simulation indicates that the particle collection rate can reach 99.44%,and the field test also proves the effectiveness of the dust removal system,which is of guiding significance for the transformation of other similar dust removal systems.展开更多
Saharan dust represents more than 50%of the total desert dust emitted around the globe and its radiative effect significantly affects the atmospheric circulation at a continental scale.Previous studies on dust vertica...Saharan dust represents more than 50%of the total desert dust emitted around the globe and its radiative effect significantly affects the atmospheric circulation at a continental scale.Previous studies on dust vertical distribution and the Saharan Air Layer(SAL)showed some shortcomings that could be attributed to imperfect representation of the effects of deep convection and scavenging.The authors investigate here the role of deep convective transport and scavenging on the vertical distribution of mineral dust over Western Africa.Using multi-year(2006-2010)simulations performed with the variable-resolution(zoomed)version of the LMDZ climate model.Simulations are compared with aerosol amounts recorded by the Aerosol Robotic Network(AERONET)and with vertical profiles of the Cloud-Aerosol Lidar with Orthogonal Polarization(CALIOP)measurements.LMDZ allows a thorough examination of the respective roles of deep convective transport,convective and stratiform scavenging,boundary layer transport,and advection processes on the vertical mineral dust distribution over Western Africa.The comparison of simulated dust Aerosol Optical Depth(AOD)and distribution with measurements suggest that scavenging in deep convection and subsequent re-evaporation of dusty rainfall in the lower troposphere are critical processes for explaining the vertical distribution of desert dust.These processes play a key role in maintaining a well-defined dust layer with a sharp transition at the top of the SAL and in establishing the seasonal cycle of dust distribution.This vertical distribution is further reshaped offshore in the Inter-Tropical Convergence Zone(ITCZ)over the Atlantic Ocean by marine boundary layer turbulent and convective transport and wet deposition at the surface.展开更多
The internal mechanism of the high hydrophobicity of the coal samples from the Pingdingshan mining area was studied through industrial,element,and surface functional group analysis.Laboratory testing and molecular dyn...The internal mechanism of the high hydrophobicity of the coal samples from the Pingdingshan mining area was studied through industrial,element,and surface functional group analysis.Laboratory testing and molecular dynamics simulations were employed to study the impact of three types of surfactants on the surface adsorption properties and wettability of highly hydrophobic bituminous coal.The results show that the surface of highly hydrophobic bituminous coal is compact,rich in inorganic minerals,and poorly wettable and that coal molecules are dominated by hydrophobic functional groups of aromatic rings and aliphatic structures.The wetting performance of surfactants as the intermediate carrier to connect coal and water molecules is largely determined by the interaction force between surfactants and coal(Fs-c)and the interaction force between surfactants and water(Fs-w),which effectively improve the wettability of modified coal dust via modifying its surface electrical properties and surface energy.A new type of wetting agent with a dust removal rate of 89%has been developed through discovery of a compound wetting agent solution with optimal wetting and settling performance.This paper provides theoretical and technical support for removing highly hydrophobic bituminous coal dust in underground mining.展开更多
Dust storms are one of the most frequent meteorological disasters in China,endangering agricultural production,transportation,air quality,and the safety of people’s lives and property.Against the backdrop of climate ...Dust storms are one of the most frequent meteorological disasters in China,endangering agricultural production,transportation,air quality,and the safety of people’s lives and property.Against the backdrop of climate change,Mongolia’s contribution to China’s dust cannot be ignored in recent years.In this study,we used the Weather Research and Forecasting model coupled with Chemistry(WRF-Chem),along with dynamic dust sources and the HYSPLIT model,to analyze the contributions of different dust sources to dust concentrations in northern China in March and April 2023.The results show that the frequency of dust storms in 2023 was the highest observed in the past decade.Mongolia and the Taklimakan Desert were identified as two main dust sources contributing to northern China.Specifically,Mongolia contributed more than 42%of dust,while the Taklimakan Desert accounted for 26%.A cold high-pressure center,a cold front,and a Mongolian cyclone resulted in the transport of dust aerosols from Mongolia and the Taklimakan Desert to northern China,where they affected most parts of the region.Moreover,two machine learning methods[the XGBoost algorithm and the Synthetic Minority Oversampling Technique(SMOTE)]were used to forecast the dust storms in March 2023,based on ground observations and WRF-Chem simulations over East Asia.XGBoost-SMOTE performed well in predicting hourly PM10 concentrations in China in March 2023,with a mean absolute error of 33.8μg m−3 and RMSE of 54.2μg m−3.展开更多
The red imported fire ant,Solenopsis invicta Buren,poses a significant threat to biodiversity,agriculture,and public health in its introduced ranges.While chemicals such as toxic baits and dust are the main methods fo...The red imported fire ant,Solenopsis invicta Buren,poses a significant threat to biodiversity,agriculture,and public health in its introduced ranges.While chemicals such as toxic baits and dust are the main methods for S.invicta control,toxic baits are slow,requiring approximately one or two weeks,but dust can eliminate the colony of fire ants rapidly in just three to five days.To explore more active ingredients for fire ant control using dusts,the toxicity of bifenthrin and dimefluthrin,the horizontal transfer of bifenthrin and dimefluthrin dust and their efficacy in the field were tested.The results showed that the LD50(lethal dose) values of bifenthrin and dimefluthrin were 3.40 and 1.57 ng/ant,respectively.The KT50(median knockdown time) and KT95(95%knockdown time) values of a 20μg mL^(–1)bifenthrin dose were 7.179and 16.611 min,respectively.The KT50and KT95of a 5μg mL^(–1)dimefluthrin dose were 1.538 and 2.825 min,respectively.The horizontal transfers of bifenthrin and dimefluthrin among workers were effective.The mortality of recipients (secondary mortality) and secondary recipients (tertiary mortality) were both over 80%at 48 h after 0.25,0.50 and 1.00%bifenthrin dust treatments.The secondary mortality of recipients was over 99%at 48 h after 0.25,0.50 and 1.00% dimefluthrin dust treatments,but the tertiary mortality was below 20%.The field trial results showed that both bifenthrin and dimefluthrin exhibited excellent fire ant control effects,and the comprehensive control effects of 1.00%bifenthrin and dimefluthrin dusts at 14 d post-treatment were 95.87 and 85.70%,respectively.展开更多
Experiments of soiling effects on the performances of a PV panel have been performed using dust collected from two sites in the region of Agadir-Morocco.The optical transmittance of the front glass was found to depend...Experiments of soiling effects on the performances of a PV panel have been performed using dust collected from two sites in the region of Agadir-Morocco.The optical transmittance of the front glass was found to depend on the nature and density of dust.The nature of dust was studied by means of scanning electron microscopy and energy dispersive x-ray spectroscopy.It was found that the granulometry of dust particles depends on the study area.For a dust density of around 20 g/m^(2),the maximum power Pmax of the solar panel decreases drastically from 30 to 20 W for the(HP)site,and no more than 14 W for the(AD)site.The diversity of the behavior of the soiled panel was explained in terms of the size of the particles collected from each area.The transmission of light across the front glass of the PV panel is more affected when the sizes of particles are small.展开更多
Coal is the major source of power in India and world over.Coal mining is an essential industry which has a major role in the economic development of the country.Most major mining activities contribute directly or indi...Coal is the major source of power in India and world over.Coal mining is an essential industry which has a major role in the economic development of the country.Most major mining activities contribute directly or indirectly to air pollution.Coal dust is a major air pollutant which affects the personal working in the mines and also people residing in villages near the mines.Air pollution due to coal particulates can affect human health and cause damages to the environment.Hence effective pollution control mechanisms are needed to keep the pollution levels within permissible levels.The easiest and most common method employed for dust suppression worldwide is sprinkling of water.In majority of mines,water sprinklers are operated manually and can lead to wastage of water due to over sprinkling.It can also prove to be ineffective in dust suppression if sprinkling is not done properly.The paper proposes a system which can be deployed to automate the dust suppressions sprinklers.The system will monitor the concentration of PM_(10) and PM_(2.5) in the air and initiate sprinkling operation when the particulate matter content exceeds preconfigured limits.展开更多
Single-fuid nozzles and dual-fuid nozzles are the two typical jet crushing methods used in spray dust reduction. To distinguish the atomization mechanism of single-fuid and dual-fuid nozzles and improve dust control e...Single-fuid nozzles and dual-fuid nozzles are the two typical jet crushing methods used in spray dust reduction. To distinguish the atomization mechanism of single-fuid and dual-fuid nozzles and improve dust control efciency at the coal mining faces, the atomization characteristics and dust reduction performance of the two nozzles were quantitatively compared. Results of experiments show that, as water supply pressure increased, the atomization angle of the swirl pressure nozzle reaches a maximum of 62° at 6 MPa and then decreases, but its droplet size shows an opposite trend with a minimum of 41.7 μm. The water supply pressure helps to improve the droplet size and the atomization angle of the internal mixing air–liquid nozzle, while the air supply pressure has a suppressive efect for them. When the water supply pressure is 0.2 MPa and the air supply pressure reaches 0.4 MPa, the nozzle obtains the smallest droplet size which is 10% smaller than the swirl pressure nozzle. Combined with the dust reduction experimental results, when the water consumption at the working surface is not limited, using the swirl pressure nozzle will achieve a better dust reduction efect. However, the internal mixing air–liquid nozzle can achieve better and more economical dust reduction performance in working environments where water consumption is limited.展开更多
Wet dust removal systems used to control dust in the polishing or grinding process of Mg alloy products are frequently associated with potential hydrogen explosion caused by magnesium-water reaction.For purpose of avo...Wet dust removal systems used to control dust in the polishing or grinding process of Mg alloy products are frequently associated with potential hydrogen explosion caused by magnesium-water reaction.For purpose of avoiding hydrogen explosion risks,we try to use a combination of chitosan(CS)and sodium phosphate(SP)to inhibit the hydrogen evolution reaction between magnesium alloy waste dust and water.The hydrogen evolution curves and chemical kinetics modeling for ten different mixing ratios demonstrate that 0.4wt%CS+0.1wt%SP yields the best inhibition efficiency with hydrogen generation rate of almost zero.SEM and EDS analyses indicate that this composite inhibitor can create a uniform,smooth,tight protective film over the surface of the alloy dust particles.FTIR and XRD analysis of the chemical composition of the surface film show that this protective film contains CS and SP chemically adsorbed on the surface of ZK60 but no detectable Mg(OH)_(2),suggesting that magnesium-water reaction was totally blocked.Our new method offers a thorough solution to hydrogen explosion by inhibiting the hydrogen generation of magnesium alloy waste dust in a wet dust removal system.展开更多
In the ELMy H-mode experiment,naturally occurring dust originating at the high-field side is clearly observed using the high-speed vacuum ultraviolet imaging system developed on the Experimental Advanced Superconducti...In the ELMy H-mode experiment,naturally occurring dust originating at the high-field side is clearly observed using the high-speed vacuum ultraviolet imaging system developed on the Experimental Advanced Superconducting Tokamak(EAST).The main ablation cloud shape is similar to the classical shape observed in pellet fueling experiments.However,during the dust penetration,an erupted secondary cloudlet with a bent‘cigar’shape is observed and moves upwards along the direction perpendicular to the magnetic field line,which is different to the obviation in the pellet fueling experiments.This may be due to the ion diamagnetic drift effect.The velocities of the secondary cloudlet are estimated to be 50–80 m s^(-1).In addition,a significant degradation of the plasma confinement is observed during the dust penetration.展开更多
基金Supported by the National Basic Research Program of China(973)(No.2007CB613601)Supported by the National Natural Science Foundationof China(No.51134007)Supported by the Science&Technology Plan of Hunan Province(No.2011FJ6005)
文摘The zinc-containing dust was oxidatively pretreated with calcium hypochlorite,subsequently leached with ammonia/ammonium bicarbonate solution to obtain the ammoniacal leaching solution,and zinc oxide was produced by ammonia distillation of the ammoniacal leaching solution and subsequent calcination. The elements of iron and manganese could not be detected in ammoniacal leaching solution,and the extraction rate of zinc was 98.2% in ammoniacal leaching process. The zinc oxide content in the product is 99.5%(ω),and the contents of iron and manganese in the product were 0.002 8‰ and 0.000 84‰(ω), respectively. The analyses of the valence states of iron and manganese in the zinc-containing dust with and without pretreatment were performed by chemical analysis and XPS,and the possible oxidation mechanism of the oxidative pretreatment of the dust was discussed. It is concluded that Fe 2+-oxide and Mn 2+-oxide in the dust were oxidized to Fe 3+-oxide and/or its hydrate and Mn 4+-oxide and/or its hydrate by calcium hypochlorite during the oxidative pretreatment process,respectively.
基金financially supported by the National Key Basic Research and Development Program of China(No. 2012CB720405)
文摘A mathematical model was established to describe the direct reduction of pellets in a rotary hearth furnace (RHF). In the model, heat transfer, mass transfer, and gas-solid chemical reactions were taken into account. The behaviors of iron metallization and dezincification were analyzed by the numerical method, which was validated by experimental data of the direct reduction of pellets in a Si-Mo furnace. The simulation results show that if the production targets of iron metallization and dezincification are up to 80% and 90%, respectively, the furnace temperature for high-temperature sections must be set higher than 1300~ C. Moreover, an undersupply of secondary air by 20% will lead to a decline in iron metallization rate of discharged pellets by 10% and a decrease in dezincing rate by 13%. In addition, if the residence time of pellets in the furnace is over 20 min, its further extension will hardly lead to an obvious increase in production indexes under the same furnace temperature curve.
基金supported by the National Natural Science Foundation of China(Grant Nos.12272001,11972046)the Outstanding Youth Project of Natural Science Foundation of Anhui Province(Grant No.2108085Y02)the Major Project of Anhui University Natural Science Foundation(Grant No.KJ2020ZD30)。
文摘The flame propagation processes of MgH_(2)dust clouds with four different particle sizes were recorded by a high-speed camera.The dynamic flame temperature distributions of MgH_(2)dust clouds were reconstructed by the two-color pyrometer technique,and the chemical composition of solid combustion residues were analyzed.The experimental results showed that the average flame propagation velocities of 23μm,40μm,60μm and 103μm MgH_(2)dust clouds in the stable propagation stage were 3.7 m/s,2.8 m/s,2.1 m/s and 0.9 m/s,respectively.The dust clouds with smaller particle sizes had faster flame propagation velocity and stronger oscillation intensity,and their flame temperature distributions were more even and the temperature gradients were smaller.The flame structures of MgH_(2)dust clouds were significantly affected by the particle sinking velocity,and the combustion processes were accompanied by micro-explosion of particles.The falling velocities of 23μm and 40μm MgH_(2)particles were 2.24 cm/s and 6.71 cm/s,respectively.While the falling velocities of 60μm and 103μm MgH_(2)particles were as high as 15.07 cm/s and 44.42 cm/s,respectively,leading to a more rapid downward development and irregular shape of the flame.Furthermore,the dehydrogenation reaction had a significant effect on the combustion performance of MgH_(2)dust.The combustion of H_(2)enhanced the ignition and combustion characteristics of MgH_(2)dust,resulting in a much higher explosion power than the pure Mg dust.The micro-structure characteristics and combustion residues composition analysis of MgH_(2)dust indicated that the combustion control mechanism of MgH_(2)dust flame was mainly the heterogeneous reaction,which was affected by the dehydrogenation reaction.
基金financial support from the National Key Research and Development Program of China(2018YFB0605003).
文摘Dust removal from pyrolytic vapors at high temperatures is an obstacle to the industrialization of the coal pyrolysis process.In this work,a granular bed with expanded perlites as filtration media was designed and integrated into a 10 t·d^(–1)coal pyrolysis facility.The testing results showed that around 97.56%dust collection efficiency was achieved.As a result,dust content in tar was significantly lowered.The pressure drop of the granular bed maintained in the range of 356 Pa to 489 Pa.The dust size in the effluent after filtration exhibited a bimodal distribution,which was attributed to the heterogeneity of the dust components.The effects of filtration bed on pyrolytic product yields were also discussed.A modified filtration model based on the macroscopic phenomenological theory was proposed to describe the performance of the granular bed.The computation results were well agreed with the experimental data.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 12275354 and 11805272)the Civil Aviation University of China (Grant No. 3122023PT08)。
文摘The driven-dissipative Langevin dynamics simulation is used to produce a two-dimensional(2D) dense cloud, which is composed of charged dust particles trapped in a quadratic potential. A 2D mesh grid is built to analyze the center-to-wall dust density. It is found that the local dust density in the outer region relative to that of the inner region is more nonuniform,being consistent with the feature of quadratic potential. The dependences of the global dust density on equilibrium temperature, particle size, confinement strength, and confinement shape are investigated. It is found that the particle size, the confinement strength, and the confinement shape strongly affect the global dust density, while the equilibrium temperature plays a minor effect on it. In the direction where there is a stronger confinement, the dust density gradient is bigger.
文摘This paper introduces the method of coal dust treatment in crushing station and the present situation of dust removal system in typical open-pit coal mine crushing station in China,and expounds the research idea of determining comprehensive dust removal(suppression)system in crushing station inspired by the working principle of"range hood".Based on the design example and link optimization of the crush-ing station of open-pit coal mine I of Thar coalfield,this paper finally draws some conclusions on the key technologies of dust removal(suppression)system of open-pit coal mine crushing station.This study has certain reference value for the technical innovation of dust removal(suppression)system in crushing station,the realization of green mining in"crushing link",and the reduction and avoidance of ecological environment pollution in mining area.
文摘Evaluation of assessment of the metal processes governing the metals distribution in soil and dust samples is very significant and protects the health of human and ecological system. Recently, special attention has given to the assessment of metals pollution impact on soil and dust within industrial areas. This study aims to assess the metal contamination levels in the topsoil and street dust around the cement factory in Qadissiya area, southern Jordan. The levels of seven metals (namely Fe, Zn, Cu, Pb, Cr, Cd, and Mn) were analyzed using Flame Atomic Absorption Spec-trophotometer (FAAS) to monitor, evaluate, and to compare topsoil and road dust pollution values of metals of the different types of urban area. The physicochemical parameters which believed to affect the mobility of metals in the soil of the study area were determined such as pH, EC, TOM, CaCO3 and CEC. The levels of metal in soil samples are greater on the surface but decrease in the lower part as a result of the basic nature of soil. The mean values of the metals in soil can be arranged in the following order: Zn > Pb > Mn > Fe > Cu > Cr > Cd. The relatively high concentration of metals in the soil sample was attributed to anthropogenic activities such as traffic emissions, cement factory and agricultural activities. Correlation coefficient analysis and the spatial distribution of indices and the results of statistical analysis indicate three groups of metals: Fe and Mn result by natural origin, Zn, Pb, Cu and Zn result by anthropogenic origin (mainly motor vehicle traffic and abrasion of tires) while Cd is mixed origin. The higher content level values of metals of anthropogenic source in soil samples indicate that it is a source of contamination of air in the studied area. .
基金This research was supported by the MSIT(Ministry of Science and ICT),Korea,under the ICAN(ICT Challenge and Advanced Network of HRD)Program(IITP-2020-0-01816)supervised by the IITP(Institute of Information&Communications Technology Planning&Evaluation)This research was also supported by National Research Foundation(NRF)of Korea Grant funded by the Korean Government(MSIT)(No.2021R1A4A3022102).
文摘Given the increasing number of countries reporting degraded air quality,effective air quality monitoring has become a critical issue in today’s world.However,the current air quality observatory systems are often prohibitively expensive,resulting in a lack of observatories in many regions within a country.Consequently,a significant problem arises where not every region receives the same level of air quality information.This disparity occurs because some locations have to rely on information from observatories located far away from their regions,even if they may be the closest available options.To address this challenge,a novel approach that leverages machine learning and deep learning techniques to forecast fine dust concentrations was proposed.Specifically,continuous location features in the form of latitude and longitude values were incorporated into our models.By utilizing a comprehensive dataset comprising weather conditions,air quality measurements,and location properties,various machine learning models,including Random Forest Regression,XGBoost Regression,AdaBoost Regression,and a deep learning model known as Long Short-Term Memory(LSTM)were trained.Our experimental results demonstrated that the LSTM model outperforms the other models,achieving the best score with a root mean squared error of 23.48 in predicting fine dust(PM10)concentrations on an hourly basis.Furthermore,the fact that incorporating location properties,such as longitude and latitude values,enhances the overall quality of the regression models was discovered.Additionally,the implications and contributions of our research were discussed.By implementing our approach,the cost associated with relying solely on existing observatories can be substantially reduced.This reduction in costs can pave the way for economically efficient fine dust observation systems,ensuring more widespread and accurate air quality monitoring across different regions.
基金the Independent Innovation Project for Postgraduates of Central South University(No.160171008)the National Natural Science Foundation of China(project No.U2031204)the project of Xinjiang(No.2021D01C075)。
文摘Polycyclic aromatic hydrocarbons(PAHs),PANHs,and peptoids dust spectral calculations from the interstellar medium(ISM)are important for dust observations and theory.Our goal is to calculate the radiation spectrum of spherical PAHs dust clusters in a vacuum containing ionized and applied in the presence of an electric field.We propose a new simple computational model to calculate the size of three-dimensional spherical dust clusters formed by different initial dust structures.By the Vienna Ab-initio Simulation Package code,the density functional theory with the generalized approximation was used to calculate the electron density gradient and obtain the radiation spectrum of dust.When the radius of spherical dust clusters is~[0.009-0.042]μm,the dust radiation spectrum agrees well with the Z=0.02 mMMP stellar spectra,and the PAHs radiation spectrum of NGC 4676 at wavelengths of(0-5]μm and(5-10]μm,respectively.In the ionized state,the N-PAH,C_(10)H_(9)N,2(C_(4)H_(4))^(1+),and peptoids 4(CHON),(C_(8)H_(10)N_(2)O_(5))^(1+)dust clusters at 3.3μm,while the 2(C_(22)H_(21)N_(3)O_(2))^(1+),4(CHON)dust clusters at 5.2μm have obvious peaks.There is a characteristic of part of PAHs and peptoids clusters radiation at the nearinfrared wavelength of 2μm.However,especially after applying an electric field to the dust,the emission spectrum of the dust increases significantly in the radiation wavelength range[3-10]μm.Consequently,the dust clusters of PAHs,PANHs,and peptoids of the radius size~[0.009-0.042]μm are likely to exist in the ISM.
文摘Dust deposition on the surface of photovoltaic (PV) cells poses a significant challenge to their efficiency, especially in arid regions characterized by desert and semi-desert conditions. Despite the pronounced impact of dust accumulation, these regions offer optimal solar radiation and minimal cloud cover, making them ideal candidates for widespread PV cell deployment. Various surface cleaning methods exist, each employing distinct approaches. Choosing an appropriate cleaning method requires a comprehensive understanding of the mechanisms involved in both dust deposition on module surfaces and dust adhesion to PV cell surfaces. The mechanisms governing dust deposition and adhesion are complex and multifaceted, influenced by factors such as the nature and properties of the dust particles, environmental climatic conditions, characteristics of protective coatings, and the specific location of the PV installation. These factors exhibit regional variations, necessitating the implementation of diverse cleaning approaches tailored to the unique conditions of each location. The first part of this article explores the factors influencing dust deposition on PV cell surfaces, delving into the intricate interplay of environmental variables and particle characteristics. Subsequently, the second part addresses various cleaning methods, offering an analysis of their respective advantages and disadvantages. By comprehensively examining the factors influencing dust accumulation and evaluating the effectiveness of different cleaning strategies, this article aims to contribute valuable insights to the ongoing efforts to optimize the performance and longevity of photovoltaic systems in diverse geographical contexts.
基金Changchun Science and Technology Development Plan Project,Automobile Rolling Line Longitudinal Beam Cutting Process Under the Extraction and Dust Removal Process Test and Research,Project Approval No.21ST04。
文摘To improve the poor efficiency of the dust removal system in the plasma cutting station of automotive longitudinal beams,and reduce the cutting surface quality degradation due to dust,a bottom-side suction dust removal system is designed,and the dust removal effect is optimized through the setting of the following dampers and diversion plates.The result of numerical simulation indicates that the particle collection rate can reach 99.44%,and the field test also proves the effectiveness of the dust removal system,which is of guiding significance for the transformation of other similar dust removal systems.
基金The authors wish to thank the Ecosystem Approach to the management of fisheries and the marine environment in the West African Waters(AWA)project.They also acknowledge support from the international joint laboratory ECLAIRS.The Laboratoire de Météorologie Dynamique(LMD)and the Global Challenges Research Fund(GCRF)African Science for Weather Information and Techniques(SWIFT)Programme.NASA,CNES,and ICARE are acknowledged for providing access to CALIOP and Sun photometer AERONET data.
文摘Saharan dust represents more than 50%of the total desert dust emitted around the globe and its radiative effect significantly affects the atmospheric circulation at a continental scale.Previous studies on dust vertical distribution and the Saharan Air Layer(SAL)showed some shortcomings that could be attributed to imperfect representation of the effects of deep convection and scavenging.The authors investigate here the role of deep convective transport and scavenging on the vertical distribution of mineral dust over Western Africa.Using multi-year(2006-2010)simulations performed with the variable-resolution(zoomed)version of the LMDZ climate model.Simulations are compared with aerosol amounts recorded by the Aerosol Robotic Network(AERONET)and with vertical profiles of the Cloud-Aerosol Lidar with Orthogonal Polarization(CALIOP)measurements.LMDZ allows a thorough examination of the respective roles of deep convective transport,convective and stratiform scavenging,boundary layer transport,and advection processes on the vertical mineral dust distribution over Western Africa.The comparison of simulated dust Aerosol Optical Depth(AOD)and distribution with measurements suggest that scavenging in deep convection and subsequent re-evaporation of dusty rainfall in the lower troposphere are critical processes for explaining the vertical distribution of desert dust.These processes play a key role in maintaining a well-defined dust layer with a sharp transition at the top of the SAL and in establishing the seasonal cycle of dust distribution.This vertical distribution is further reshaped offshore in the Inter-Tropical Convergence Zone(ITCZ)over the Atlantic Ocean by marine boundary layer turbulent and convective transport and wet deposition at the surface.
文摘The internal mechanism of the high hydrophobicity of the coal samples from the Pingdingshan mining area was studied through industrial,element,and surface functional group analysis.Laboratory testing and molecular dynamics simulations were employed to study the impact of three types of surfactants on the surface adsorption properties and wettability of highly hydrophobic bituminous coal.The results show that the surface of highly hydrophobic bituminous coal is compact,rich in inorganic minerals,and poorly wettable and that coal molecules are dominated by hydrophobic functional groups of aromatic rings and aliphatic structures.The wetting performance of surfactants as the intermediate carrier to connect coal and water molecules is largely determined by the interaction force between surfactants and coal(Fs-c)and the interaction force between surfactants and water(Fs-w),which effectively improve the wettability of modified coal dust via modifying its surface electrical properties and surface energy.A new type of wetting agent with a dust removal rate of 89%has been developed through discovery of a compound wetting agent solution with optimal wetting and settling performance.This paper provides theoretical and technical support for removing highly hydrophobic bituminous coal dust in underground mining.
基金This work was jointly supported by a project supported by the Joint Fund of the National Natural Science Foundation of China and the China Meteorological Administration(Grant No.U2242209)the National Natural Science Foundation of China(Grant No.42175106).
文摘Dust storms are one of the most frequent meteorological disasters in China,endangering agricultural production,transportation,air quality,and the safety of people’s lives and property.Against the backdrop of climate change,Mongolia’s contribution to China’s dust cannot be ignored in recent years.In this study,we used the Weather Research and Forecasting model coupled with Chemistry(WRF-Chem),along with dynamic dust sources and the HYSPLIT model,to analyze the contributions of different dust sources to dust concentrations in northern China in March and April 2023.The results show that the frequency of dust storms in 2023 was the highest observed in the past decade.Mongolia and the Taklimakan Desert were identified as two main dust sources contributing to northern China.Specifically,Mongolia contributed more than 42%of dust,while the Taklimakan Desert accounted for 26%.A cold high-pressure center,a cold front,and a Mongolian cyclone resulted in the transport of dust aerosols from Mongolia and the Taklimakan Desert to northern China,where they affected most parts of the region.Moreover,two machine learning methods[the XGBoost algorithm and the Synthetic Minority Oversampling Technique(SMOTE)]were used to forecast the dust storms in March 2023,based on ground observations and WRF-Chem simulations over East Asia.XGBoost-SMOTE performed well in predicting hourly PM10 concentrations in China in March 2023,with a mean absolute error of 33.8μg m−3 and RMSE of 54.2μg m−3.
基金supported by the Special Project for Sustainable Development Science and Technology of Shenzhen, China (2021N007)the Special Project for Red Imported Fire Ant Management, Shenzhen Agricultural Science and Technology Promotion Center, China (20220900044zbzjbc)。
文摘The red imported fire ant,Solenopsis invicta Buren,poses a significant threat to biodiversity,agriculture,and public health in its introduced ranges.While chemicals such as toxic baits and dust are the main methods for S.invicta control,toxic baits are slow,requiring approximately one or two weeks,but dust can eliminate the colony of fire ants rapidly in just three to five days.To explore more active ingredients for fire ant control using dusts,the toxicity of bifenthrin and dimefluthrin,the horizontal transfer of bifenthrin and dimefluthrin dust and their efficacy in the field were tested.The results showed that the LD50(lethal dose) values of bifenthrin and dimefluthrin were 3.40 and 1.57 ng/ant,respectively.The KT50(median knockdown time) and KT95(95%knockdown time) values of a 20μg mL^(–1)bifenthrin dose were 7.179and 16.611 min,respectively.The KT50and KT95of a 5μg mL^(–1)dimefluthrin dose were 1.538 and 2.825 min,respectively.The horizontal transfers of bifenthrin and dimefluthrin among workers were effective.The mortality of recipients (secondary mortality) and secondary recipients (tertiary mortality) were both over 80%at 48 h after 0.25,0.50 and 1.00%bifenthrin dust treatments.The secondary mortality of recipients was over 99%at 48 h after 0.25,0.50 and 1.00% dimefluthrin dust treatments,but the tertiary mortality was below 20%.The field trial results showed that both bifenthrin and dimefluthrin exhibited excellent fire ant control effects,and the comprehensive control effects of 1.00%bifenthrin and dimefluthrin dusts at 14 d post-treatment were 95.87 and 85.70%,respectively.
文摘Experiments of soiling effects on the performances of a PV panel have been performed using dust collected from two sites in the region of Agadir-Morocco.The optical transmittance of the front glass was found to depend on the nature and density of dust.The nature of dust was studied by means of scanning electron microscopy and energy dispersive x-ray spectroscopy.It was found that the granulometry of dust particles depends on the study area.For a dust density of around 20 g/m^(2),the maximum power Pmax of the solar panel decreases drastically from 30 to 20 W for the(HP)site,and no more than 14 W for the(AD)site.The diversity of the behavior of the soiled panel was explained in terms of the size of the particles collected from each area.The transmission of light across the front glass of the PV panel is more affected when the sizes of particles are small.
文摘Coal is the major source of power in India and world over.Coal mining is an essential industry which has a major role in the economic development of the country.Most major mining activities contribute directly or indirectly to air pollution.Coal dust is a major air pollutant which affects the personal working in the mines and also people residing in villages near the mines.Air pollution due to coal particulates can affect human health and cause damages to the environment.Hence effective pollution control mechanisms are needed to keep the pollution levels within permissible levels.The easiest and most common method employed for dust suppression worldwide is sprinkling of water.In majority of mines,water sprinklers are operated manually and can lead to wastage of water due to over sprinkling.It can also prove to be ineffective in dust suppression if sprinkling is not done properly.The paper proposes a system which can be deployed to automate the dust suppressions sprinklers.The system will monitor the concentration of PM_(10) and PM_(2.5) in the air and initiate sprinkling operation when the particulate matter content exceeds preconfigured limits.
基金funded by the National Natural Science Foundation of China(52274237)the Fundamental Research Funds for the Central Universities(2021ZDPYYQ007)+1 种基金the Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX22_2656)the Graduate Innovation Program of China University of Mining and Technology(2022WLKXJ026).
文摘Single-fuid nozzles and dual-fuid nozzles are the two typical jet crushing methods used in spray dust reduction. To distinguish the atomization mechanism of single-fuid and dual-fuid nozzles and improve dust control efciency at the coal mining faces, the atomization characteristics and dust reduction performance of the two nozzles were quantitatively compared. Results of experiments show that, as water supply pressure increased, the atomization angle of the swirl pressure nozzle reaches a maximum of 62° at 6 MPa and then decreases, but its droplet size shows an opposite trend with a minimum of 41.7 μm. The water supply pressure helps to improve the droplet size and the atomization angle of the internal mixing air–liquid nozzle, while the air supply pressure has a suppressive efect for them. When the water supply pressure is 0.2 MPa and the air supply pressure reaches 0.4 MPa, the nozzle obtains the smallest droplet size which is 10% smaller than the swirl pressure nozzle. Combined with the dust reduction experimental results, when the water consumption at the working surface is not limited, using the swirl pressure nozzle will achieve a better dust reduction efect. However, the internal mixing air–liquid nozzle can achieve better and more economical dust reduction performance in working environments where water consumption is limited.
基金This work was supported by the National Natural Science Foundation of China(52074066).
文摘Wet dust removal systems used to control dust in the polishing or grinding process of Mg alloy products are frequently associated with potential hydrogen explosion caused by magnesium-water reaction.For purpose of avoiding hydrogen explosion risks,we try to use a combination of chitosan(CS)and sodium phosphate(SP)to inhibit the hydrogen evolution reaction between magnesium alloy waste dust and water.The hydrogen evolution curves and chemical kinetics modeling for ten different mixing ratios demonstrate that 0.4wt%CS+0.1wt%SP yields the best inhibition efficiency with hydrogen generation rate of almost zero.SEM and EDS analyses indicate that this composite inhibitor can create a uniform,smooth,tight protective film over the surface of the alloy dust particles.FTIR and XRD analysis of the chemical composition of the surface film show that this protective film contains CS and SP chemically adsorbed on the surface of ZK60 but no detectable Mg(OH)_(2),suggesting that magnesium-water reaction was totally blocked.Our new method offers a thorough solution to hydrogen explosion by inhibiting the hydrogen generation of magnesium alloy waste dust in a wet dust removal system.
基金supported in part by the National Key R&D Program of China(Nos.2019YFE03080200,2022YFE03030001 and2022YFE03050003)National Natural Science Foundation of China(Nos.11975271,12075284,12075283 and 12175277)+1 种基金the Chinese Academy of President’s International Fellowship Initiative(No.2021VMA0022)the Post-CUP program,JSPS-CAS Bilateral Joint Research Projects,‘Control of wall recycling on metallic plasma facing materials in fusion reactor’,2019–2022,(No.GJHZ201984)。
文摘In the ELMy H-mode experiment,naturally occurring dust originating at the high-field side is clearly observed using the high-speed vacuum ultraviolet imaging system developed on the Experimental Advanced Superconducting Tokamak(EAST).The main ablation cloud shape is similar to the classical shape observed in pellet fueling experiments.However,during the dust penetration,an erupted secondary cloudlet with a bent‘cigar’shape is observed and moves upwards along the direction perpendicular to the magnetic field line,which is different to the obviation in the pellet fueling experiments.This may be due to the ion diamagnetic drift effect.The velocities of the secondary cloudlet are estimated to be 50–80 m s^(-1).In addition,a significant degradation of the plasma confinement is observed during the dust penetration.