High activity and productivity of MoVNbTeO_(x) catalyst are challenging tasks in oxidative dehydrogenation of ethane(ODHE)for industrial application.In this work,phase-pure M1 with 30 wt%CeO_(2) composite catalyst was...High activity and productivity of MoVNbTeO_(x) catalyst are challenging tasks in oxidative dehydrogenation of ethane(ODHE)for industrial application.In this work,phase-pure M1 with 30 wt%CeO_(2) composite catalyst was treated by oxygen plasma to further enhance catalyst performance.The results show that the oxygen vacancies generated by the solid-state redox reaction between M1 and CeO_(2) capture active oxygen species in gas and transform V^(4+)to V^(5+)without damage to M1 structure.The space-time yield of ethylene of the plasma-treated catalyst was significantly increased,in which the catalyst shows an enhancement near~100% than that of phase-pure M1 at 400℃ for ODHE process.Plasma treatment for catalysts demonstrates an effective way to convert electrical energy into chemical energy in catalyst materials.Energy conversion is achieved by using the catalyst as a medium.展开更多
Carbon nanotubes-Nafion （CNTs-Nation） composites were prepared by impregnated CNTs with Nation in ethanol solution and characterized by FT-IR. Pt-Ru catalysts supported on CNTs-Nafion composites were synthesized by ...Carbon nanotubes-Nafion （CNTs-Nation） composites were prepared by impregnated CNTs with Nation in ethanol solution and characterized by FT-IR. Pt-Ru catalysts supported on CNTs-Nafion composites were synthesized by microwave-assisted polyol process. The physical and electrochemical properties of the catalysts were characterized by X-ray diffraction （XRD）, transmission electron microscope （TEM）, CO stripping voltammetry, cyclic voltammetry （CV） and chronoamperometry （CA）. The results showed that the Nation incorporation in CNTs-Nation composites did not significantly alter the oxygen-containing groups on the CNTs surface. The Pt-Ru catalyst supported on CNTs-Nafion composites with 2 wt% Naton showed good dispersion and the best CO oxidation and methanol electro-oxidation activities.展开更多
Diesel engines have been widely used due to their high thermal efficiency, good environmental adaptability, wide power adjustment range, convenient maintenance and long service life. However, the application of diesel...Diesel engines have been widely used due to their high thermal efficiency, good environmental adaptability, wide power adjustment range, convenient maintenance and long service life. However, the application of diesel engines is also facing a serious problem;that is, the emission of nitrogen oxides and particulate matter is serious. For marine diesel engine emission requirements, MARPOL Convention Annex VI imposes strict restrictions on the emission of atmospheric pollutants. The limit emission of nitrogen oxides in the Tier III emission standards mandated by IMO is 3.4 g/kWh. Therefore, in order to meet the requirements of international conventions and countries and regions, it is necessary to control the emissions of diesel engines. The NOx in the exhaust gas is mostly a thermal type of nitrogen oxide which is produced under high temperature and high pressure conditions formed during compression and combustion strokes. The diesel engine relies on the compression energy of the mixture to ignite, and the good injection atomization effect is not achieved. The distribution of the detonation point is not uniform, and local high temperature points are generated in some areas, which increases the NOx formation. The main means of reducing NOx emissions are organic internal control and post-treatment. However, the use of internal control technology to reduce the internal temperature of the machine will deteriorate the fuel combustion conditions, so that the fuel cannot be completely burned, and the emissions of incomplete combustion products such as PM and CO increase. It is difficult to achieve NOx reduction by simply relying on the internal control technology, so it is necessary to use post-processing technology. The combined use of different emission reduction technologies is also a hot topic in emissions control research. The post-treatment methods for NOx emission reduction include direct catalytic decomposition, selective non-catalytic reduction, selective catalytic reduction, lean-burn adsorption catalytic reduction, and low-temperature plasma assisted technology. The current research and application schemes in the industry are SCR selectivity. Catalytic reduction and LNT lean combustion adsorption reduction. In this paper, the partial replacement of Ce by La is carried out to modify the Ce/Zr composite oxide. The mass fraction of La2O3 in the prepared La/Ce/Zr composite oxide was 5%, and the physicochemical properties of La/Ce/Zr composite oxide powder were analyzed by ICP, OSC, SEM and TPR techniques. The experiment found that: 1) La can refine the grain and inhibit the grain growth, so that the powder obtains a higher specific surface area and a smaller particle size distribution. 2) The addition of La reduces the sintering of cerium-zirconium and improves the heat aging resistance of the catalyst under the inhibition of high temperature. 3) After doping La, it enhances the migration of surface lattice oxygen and enhances the oxygen storage capacity;the addition of La enhances the NO adsorption capacity of cerium-zirconium and improves the catalytic activity of the catalyst. The light-off temperature and the highest activity temperature of PM decrease, and the reduction rate of No is 19.2%.展开更多
This review provides insight into the current research trend in transition metal oxides(TMOs)-based photocatalysis in removing the organic colouring matters from water.For easy understanding,the research progress has ...This review provides insight into the current research trend in transition metal oxides(TMOs)-based photocatalysis in removing the organic colouring matters from water.For easy understanding,the research progress has been presented in four generations according to the catalyst composition and mode of application,viz:single component TMOs(the firstgeneration),doped TMOs/binary TMOs/doped binary TMOs(the second-generation),inactive/active support-immobilized TMOs(the third-generation),and ternary/quaternary compositions(the fourth-generation).The first two generations represent suspended catalysts,the third generation is supported catalysts,and the fourth generation can be suspended or supported.The review provides an elaborated comparison between suspended and supported catalysts,their general/specific requirements,key factors controlling degradation,and the methodologies for performance evaluation.All the plausible fundamental and advanced dye degradation mechanisms involved in each generation of catalysts were demonstrated.The existing challenges in TMOs-based photocatalysis and how the researchers approach the hitch to resolve it effectively are discussed.Future research trends are also presented.展开更多
Composite oxide FeO x /Al 2 O 3 -supported gold catalysts were prepared by a modified two-step method. The effects of preparation conditions on the initial catalytic activity and long-time stability were studied for C...Composite oxide FeO x /Al 2 O 3 -supported gold catalysts were prepared by a modified two-step method. The effects of preparation conditions on the initial catalytic activity and long-time stability were studied for CO oxidation. XRD, XPS and in situ FTIR were employed to investigate the state of FeO x and the species on the catalyst surface. The results showed that Au/FeO x /Al 2 O 3 catalysts prepared by this method exhibited high activity and high stability in a wide pH value range. Calcination pretreatment was proved to be beneficial to improving the activity and stability. The beneficial effects of FeO x acting as a structural promoter could be ascribed to the ability to supply active oxygen species. As the precursor of FeO x , Fe（NO 3 ） 3 is superior to FeCl 3 for obtaining higher stability.展开更多
A novel mesoporous HPMo/SiO2 composite was synthesized by the sol-gel method with triblock copolymer EO20PO70EO20 as template.The properties of the product were characterized by X-ray diffraction,transmission electron...A novel mesoporous HPMo/SiO2 composite was synthesized by the sol-gel method with triblock copolymer EO20PO70EO20 as template.The properties of the product were characterized by X-ray diffraction,transmission electron microscopy,N2 adsorption-desorption isotherms,Fourier transform infrared spectrometer and inductively-coupled plasma analysis.The experimental results show that the product has a very ordered hexagonal mesostructure,and the HPMo is immobilized into the framework of silica.The final mesoporous composite shows excellent stability in polar solvents.Results of catalytic tests indicate that the composite is an effective catalyst for oxidation of dibenzothiophen,and there are few activity losses even after the third cycle of uses.The high catalytic activity and good insolubility make it a promising catalyst in oxidative desulfurization process.展开更多
A λ-MnO2 supported Pt nanocatalyst（5 wt.% Pt/λ-MnO2） was synthesized using a facile approach.X-ray diffraction（XRD）, X-ray photoelectron spectroscopy（XPS）, scanning electronic microscope（SEM）, transmission e...A λ-MnO2 supported Pt nanocatalyst（5 wt.% Pt/λ-MnO2） was synthesized using a facile approach.X-ray diffraction（XRD）, X-ray photoelectron spectroscopy（XPS）, scanning electronic microscope（SEM）, transmission electron microscopy（TEM）, and energy disperse spectroscopy（EDS） were used for catalyst structure and morphology characterization, which showed that the metallic Pt particles were attached on a λ-MnO2 surface through the interaction between Pt and λ-MnO2.Cyclic voltammetry（CV） was used to test the catalytic activity of Pt/λ-MnO2 toward methanol oxidation, which showed that Pt/λ-MnO2 catalyst has much higher catalytic activity than baseline Pt/C catalyst.展开更多
The method to increase PtRu utilization and its catalytic activity of PtRu nanoparticles supported on reduced graphene oxide(RGO)by avoiding its restacking was proposed with the aim of developing an active catalyst fo...The method to increase PtRu utilization and its catalytic activity of PtRu nanoparticles supported on reduced graphene oxide(RGO)by avoiding its restacking was proposed with the aim of developing an active catalyst for a direct methanol fuel cell.The heat treatment at 200◦C of the GO aerogel(GOA)prepared by freeze drying of GO ice was introduced to weaken the attractive force of the hydrogen bonding between the GO sheets followed by the composite with the nanoparticles,i.e.,ketjenblack(KB),TiO_(2)and Ti_(4)O_(7),at different weight ratios.The catalyst supported on the heat-treated GOA(RGOA),PtRu/RGOA,improved the PtRu utilization to some extent and also increased the ECSA and mass activity compared to that of PtRu/RGO.RGOA had fewer oxygen functional groups,especially the epoxy groups.Due to the treatment and composite,the PtRu utilization was increased from 66.5%for PtRu/RGO to 128.6%for PtRu/RGOA+Ti_(4)O_(7)(4:1)and the mass activity was improved from 50.7 A/g-PtRu for PtRu/RGO to 130.5 A/g-PtRu for PtRu/RGOA+Ti_(4)O_(7)(1:1).The Ti_(4)O_(7)nanoparticles showed the best catalytic performance for the composite suggesting that the strong interaction between Ti_(4)O_(7)and the Pt nanoparticles was effective due to its high electronic conductivity.展开更多
Ce_(x)Co_(y)Cuzoxide composite catalysts were prepared by using polyethylene glycol, citrate sol-gel method combined with PMMA template for the oxidation of o-xylene. The catalysts were characterized by the Xray diffr...Ce_(x)Co_(y)Cuzoxide composite catalysts were prepared by using polyethylene glycol, citrate sol-gel method combined with PMMA template for the oxidation of o-xylene. The catalysts were characterized by the Xray diffraction(XRD), H2-temperature programmed reduction(H2-TPR), X-ray photoelectron spectroscopy(XPS) and Fourier transform infrared spectroscopy(FT-IR), etc. The catalytic activity for o-xylene was investigated. The catalytic degradation pathway and mechanism of o-xylene were inferred. The results show that Ce O_(2)is mainly present on the surface of all catalysts. The surface area of Ce_(2)Co1Cu1is up to 77.2 m^(2)/g, and the average pore size is 10.62 nm. It exhibits redox and sufficient Ce^(4+)and Ce^(^(3+)), and reactive oxygen species, and has maximum O-H and C=O in the five catalyst samples. The catalytic activity of Ce2Co1Cu1is the best at low temperature, with the T50and T90values of 235 and 258°C at a space velocity of 32000 h-1, respectively. The o-xylene is oxidized to o-methyl benzaldehyde, and then further oxidized to o-methylbenzoic acid, and finally CO_(2)and H2O are formed.展开更多
NH_(3) in ambient air directly leads to an increase in the aerosol content in the air. These substances lead to the formation of haze to various environmental problems after atmospheric circulation and diffusion. Cont...NH_(3) in ambient air directly leads to an increase in the aerosol content in the air. These substances lead to the formation of haze to various environmental problems after atmospheric circulation and diffusion. Controlling NH_(3) emissions caused by ammonia escaping from mobile and industrial sources can effectively reduce the NH_(3) content in ambient air. Among the various NH_(3) removal methods, the selective catalytic oxygen method (NH_(3)-SCO) is committed to oxidizing NH_(3) to environmentally harmless H_(2)O and N_(2);therefore, it is the most valuable and ideal ammonia removal method. In this review, the characteristics of loaded and core-shell catalysts in NH_(3)-SCO have been reviewed in the context of catalyst structure-activity relationships, and the H_(2)O resistance and SO2 resistance of the catalysts are discussed in the context of practical application conditions. Then the effects of the valence state of the active center, oxygen species on the catalyst surface, dispersion of the active center and acidic sites on the catalyst performance are discussed comprehensively. Finally, the shortcomings of the existing catalysts are summarized and the catalyst development is discussed based on the existing studies.展开更多
基金supported by the National Natural Science Foundation of China (No.21776156).
文摘High activity and productivity of MoVNbTeO_(x) catalyst are challenging tasks in oxidative dehydrogenation of ethane(ODHE)for industrial application.In this work,phase-pure M1 with 30 wt%CeO_(2) composite catalyst was treated by oxygen plasma to further enhance catalyst performance.The results show that the oxygen vacancies generated by the solid-state redox reaction between M1 and CeO_(2) capture active oxygen species in gas and transform V^(4+)to V^(5+)without damage to M1 structure.The space-time yield of ethylene of the plasma-treated catalyst was significantly increased,in which the catalyst shows an enhancement near~100% than that of phase-pure M1 at 400℃ for ODHE process.Plasma treatment for catalysts demonstrates an effective way to convert electrical energy into chemical energy in catalyst materials.Energy conversion is achieved by using the catalyst as a medium.
基金supported by National Natural Science Foundation of China (NO.0576023)Key Project of Science and Technology Department of Guangdong Province (NO.2008B010800036 NO.2008B010800037)
文摘Carbon nanotubes-Nafion （CNTs-Nation） composites were prepared by impregnated CNTs with Nation in ethanol solution and characterized by FT-IR. Pt-Ru catalysts supported on CNTs-Nafion composites were synthesized by microwave-assisted polyol process. The physical and electrochemical properties of the catalysts were characterized by X-ray diffraction （XRD）, transmission electron microscope （TEM）, CO stripping voltammetry, cyclic voltammetry （CV） and chronoamperometry （CA）. The results showed that the Nation incorporation in CNTs-Nation composites did not significantly alter the oxygen-containing groups on the CNTs surface. The Pt-Ru catalyst supported on CNTs-Nafion composites with 2 wt% Naton showed good dispersion and the best CO oxidation and methanol electro-oxidation activities.
文摘Diesel engines have been widely used due to their high thermal efficiency, good environmental adaptability, wide power adjustment range, convenient maintenance and long service life. However, the application of diesel engines is also facing a serious problem;that is, the emission of nitrogen oxides and particulate matter is serious. For marine diesel engine emission requirements, MARPOL Convention Annex VI imposes strict restrictions on the emission of atmospheric pollutants. The limit emission of nitrogen oxides in the Tier III emission standards mandated by IMO is 3.4 g/kWh. Therefore, in order to meet the requirements of international conventions and countries and regions, it is necessary to control the emissions of diesel engines. The NOx in the exhaust gas is mostly a thermal type of nitrogen oxide which is produced under high temperature and high pressure conditions formed during compression and combustion strokes. The diesel engine relies on the compression energy of the mixture to ignite, and the good injection atomization effect is not achieved. The distribution of the detonation point is not uniform, and local high temperature points are generated in some areas, which increases the NOx formation. The main means of reducing NOx emissions are organic internal control and post-treatment. However, the use of internal control technology to reduce the internal temperature of the machine will deteriorate the fuel combustion conditions, so that the fuel cannot be completely burned, and the emissions of incomplete combustion products such as PM and CO increase. It is difficult to achieve NOx reduction by simply relying on the internal control technology, so it is necessary to use post-processing technology. The combined use of different emission reduction technologies is also a hot topic in emissions control research. The post-treatment methods for NOx emission reduction include direct catalytic decomposition, selective non-catalytic reduction, selective catalytic reduction, lean-burn adsorption catalytic reduction, and low-temperature plasma assisted technology. The current research and application schemes in the industry are SCR selectivity. Catalytic reduction and LNT lean combustion adsorption reduction. In this paper, the partial replacement of Ce by La is carried out to modify the Ce/Zr composite oxide. The mass fraction of La2O3 in the prepared La/Ce/Zr composite oxide was 5%, and the physicochemical properties of La/Ce/Zr composite oxide powder were analyzed by ICP, OSC, SEM and TPR techniques. The experiment found that: 1) La can refine the grain and inhibit the grain growth, so that the powder obtains a higher specific surface area and a smaller particle size distribution. 2) The addition of La reduces the sintering of cerium-zirconium and improves the heat aging resistance of the catalyst under the inhibition of high temperature. 3) After doping La, it enhances the migration of surface lattice oxygen and enhances the oxygen storage capacity;the addition of La enhances the NO adsorption capacity of cerium-zirconium and improves the catalytic activity of the catalyst. The light-off temperature and the highest activity temperature of PM decrease, and the reduction rate of No is 19.2%.
基金supporting us by providing technical facilities(access to journals)。
文摘This review provides insight into the current research trend in transition metal oxides(TMOs)-based photocatalysis in removing the organic colouring matters from water.For easy understanding,the research progress has been presented in four generations according to the catalyst composition and mode of application,viz:single component TMOs(the firstgeneration),doped TMOs/binary TMOs/doped binary TMOs(the second-generation),inactive/active support-immobilized TMOs(the third-generation),and ternary/quaternary compositions(the fourth-generation).The first two generations represent suspended catalysts,the third generation is supported catalysts,and the fourth generation can be suspended or supported.The review provides an elaborated comparison between suspended and supported catalysts,their general/specific requirements,key factors controlling degradation,and the methodologies for performance evaluation.All the plausible fundamental and advanced dye degradation mechanisms involved in each generation of catalysts were demonstrated.The existing challenges in TMOs-based photocatalysis and how the researchers approach the hitch to resolve it effectively are discussed.Future research trends are also presented.
基金supported by the Science and Research Reward Fund Program of Shandong Excellent Young Scientist of China (2007BS04033)
文摘Composite oxide FeO x /Al 2 O 3 -supported gold catalysts were prepared by a modified two-step method. The effects of preparation conditions on the initial catalytic activity and long-time stability were studied for CO oxidation. XRD, XPS and in situ FTIR were employed to investigate the state of FeO x and the species on the catalyst surface. The results showed that Au/FeO x /Al 2 O 3 catalysts prepared by this method exhibited high activity and high stability in a wide pH value range. Calcination pretreatment was proved to be beneficial to improving the activity and stability. The beneficial effects of FeO x acting as a structural promoter could be ascribed to the ability to supply active oxygen species. As the precursor of FeO x , Fe（NO 3 ） 3 is superior to FeCl 3 for obtaining higher stability.
基金Funded by the Hubei Provincial Department of Education Science and Technology Program for Outstanding Young Talents (Q20081209)
文摘A novel mesoporous HPMo/SiO2 composite was synthesized by the sol-gel method with triblock copolymer EO20PO70EO20 as template.The properties of the product were characterized by X-ray diffraction,transmission electron microscopy,N2 adsorption-desorption isotherms,Fourier transform infrared spectrometer and inductively-coupled plasma analysis.The experimental results show that the product has a very ordered hexagonal mesostructure,and the HPMo is immobilized into the framework of silica.The final mesoporous composite shows excellent stability in polar solvents.Results of catalytic tests indicate that the composite is an effective catalyst for oxidation of dibenzothiophen,and there are few activity losses even after the third cycle of uses.The high catalytic activity and good insolubility make it a promising catalyst in oxidative desulfurization process.
基金supported by the Funding Project for Academic Human Resources Development in Institutions of Higher Learning under the Jurisdiction of Beijing Municipality, Beijing Natural Science Foundation (No. 207001)the Major State Basic Research and Development Program of China (No. 2002CB211807)
文摘A λ-MnO2 supported Pt nanocatalyst（5 wt.% Pt/λ-MnO2） was synthesized using a facile approach.X-ray diffraction（XRD）, X-ray photoelectron spectroscopy（XPS）, scanning electronic microscope（SEM）, transmission electron microscopy（TEM）, and energy disperse spectroscopy（EDS） were used for catalyst structure and morphology characterization, which showed that the metallic Pt particles were attached on a λ-MnO2 surface through the interaction between Pt and λ-MnO2.Cyclic voltammetry（CV） was used to test the catalytic activity of Pt/λ-MnO2 toward methanol oxidation, which showed that Pt/λ-MnO2 catalyst has much higher catalytic activity than baseline Pt/C catalyst.
基金supported by JSPS KAKENHI Grant Number JP18H01772 and 21H01698.
文摘The method to increase PtRu utilization and its catalytic activity of PtRu nanoparticles supported on reduced graphene oxide(RGO)by avoiding its restacking was proposed with the aim of developing an active catalyst for a direct methanol fuel cell.The heat treatment at 200◦C of the GO aerogel(GOA)prepared by freeze drying of GO ice was introduced to weaken the attractive force of the hydrogen bonding between the GO sheets followed by the composite with the nanoparticles,i.e.,ketjenblack(KB),TiO_(2)and Ti_(4)O_(7),at different weight ratios.The catalyst supported on the heat-treated GOA(RGOA),PtRu/RGOA,improved the PtRu utilization to some extent and also increased the ECSA and mass activity compared to that of PtRu/RGO.RGOA had fewer oxygen functional groups,especially the epoxy groups.Due to the treatment and composite,the PtRu utilization was increased from 66.5%for PtRu/RGO to 128.6%for PtRu/RGOA+Ti_(4)O_(7)(4:1)and the mass activity was improved from 50.7 A/g-PtRu for PtRu/RGO to 130.5 A/g-PtRu for PtRu/RGOA+Ti_(4)O_(7)(1:1).The Ti_(4)O_(7)nanoparticles showed the best catalytic performance for the composite suggesting that the strong interaction between Ti_(4)O_(7)and the Pt nanoparticles was effective due to its high electronic conductivity.
基金Project supported by the Zhejiang Provincial Natural Science Foundation of China (LY20E080003)。
文摘Ce_(x)Co_(y)Cuzoxide composite catalysts were prepared by using polyethylene glycol, citrate sol-gel method combined with PMMA template for the oxidation of o-xylene. The catalysts were characterized by the Xray diffraction(XRD), H2-temperature programmed reduction(H2-TPR), X-ray photoelectron spectroscopy(XPS) and Fourier transform infrared spectroscopy(FT-IR), etc. The catalytic activity for o-xylene was investigated. The catalytic degradation pathway and mechanism of o-xylene were inferred. The results show that Ce O_(2)is mainly present on the surface of all catalysts. The surface area of Ce_(2)Co1Cu1is up to 77.2 m^(2)/g, and the average pore size is 10.62 nm. It exhibits redox and sufficient Ce^(4+)and Ce^(^(3+)), and reactive oxygen species, and has maximum O-H and C=O in the five catalyst samples. The catalytic activity of Ce2Co1Cu1is the best at low temperature, with the T50and T90values of 235 and 258°C at a space velocity of 32000 h-1, respectively. The o-xylene is oxidized to o-methyl benzaldehyde, and then further oxidized to o-methylbenzoic acid, and finally CO_(2)and H2O are formed.
基金the National Natural Science Foundation of China(No.52000093)Yunnan Fundamental Research Projects(No.202101BE070001-001)National Engineering Laboratory for Mobile Source Emission Control Technology(No.NELMS2019B03).
文摘NH_(3) in ambient air directly leads to an increase in the aerosol content in the air. These substances lead to the formation of haze to various environmental problems after atmospheric circulation and diffusion. Controlling NH_(3) emissions caused by ammonia escaping from mobile and industrial sources can effectively reduce the NH_(3) content in ambient air. Among the various NH_(3) removal methods, the selective catalytic oxygen method (NH_(3)-SCO) is committed to oxidizing NH_(3) to environmentally harmless H_(2)O and N_(2);therefore, it is the most valuable and ideal ammonia removal method. In this review, the characteristics of loaded and core-shell catalysts in NH_(3)-SCO have been reviewed in the context of catalyst structure-activity relationships, and the H_(2)O resistance and SO2 resistance of the catalysts are discussed in the context of practical application conditions. Then the effects of the valence state of the active center, oxygen species on the catalyst surface, dispersion of the active center and acidic sites on the catalyst performance are discussed comprehensively. Finally, the shortcomings of the existing catalysts are summarized and the catalyst development is discussed based on the existing studies.
