Analysis and seismic tests of composite shear walls with CFST columns and steel plate deep beams

A composite shear wall concept based on concrete filled steel tube （CFST） columns and steel plate （SP） deep beams is proposed and examined in this study. The new wall is composed of three different energy dissipation elements： CFST columns; SP deep beams; and reinforced concrete （RC） strips. The RC strips are intended to allow the core structural elements - the CFST columns and SP deep beams - to work as a single structure to consume energy. Six specimens of different configurations were tested under cyclic loading. The resulting data are analyzed herein. In addition, numerical simulations of the stress and damage processes for each specimen were carried out, and simulations were completed for a range of location and span-height ratio variations for the SP beams. The simulations show good agreement with the test results. The core structure exhibits a ductile yielding mechanism characteristic of strong column-weak beam structures, hysteretic curves are plump and the composite shear wall exhibits several seismic defense lines. The deformation of the shear wall specimens with encased CFST column and SP deep beam design appears to be closer to that of entire shear walls. Establishing optimal design parameters for the configuration of SP deep beams is pivotal to the best seismic behavior of the wall. The new composite shear wall is therefore suitable for use in the seismic design of building structures.

Low cycle fatigue behavior of zirconium−titanium−steel composite plate

The low cycle fatigue behavior of zirconium−titanium−steel composite plate under symmetrical and asymmetric stress control was studied.The effects of mean stress and stress amplitude on cyclic deformation,ratcheting effect and damage mechanism were discussed in detail.The results show that under symmetric stress control,the forward ratcheting deformation is observed.Under asymmetric stress control,the ratcheting strain increases rapidly with mean stress and stress amplitude increasing.Under high stress amplitude,the influence of mean stress is more significant.In addition,by studying the variation of strain energy density,it is found that the stress amplitude mainly promotes the fatigue damage,while the mean stress leads to the ratcheting damage.In addition,fractographic observation shows that the crack initiates in the brittle metal compound at the interface,and the steel has higher resistance to crack propagation.Finally,the accuracy of life prediction model considering ratcheting effect is discussed in detail,and a high-precision life prediction model directly based on mean stress and stress amplitude is proposed.

Lateral load-carrying capacity analyses of composite shear walls with double steel plates and filled concrete with binding bars

A method is developed to predict the lateral load-carrying capacity of composite shear walls with double steel plates and filled concrete with binding bars(SCBs). Nonlinear finite element models of SCBs were established by using the finite element tool, Abaqus. Tie constraints were used to connect the binding bars and the steel plates. Surface-to-surface contact provided by the Abaqus was used to simulate the interaction between the steel plate and the core concrete. The established models could predict the lateral load-carrying capacity of SCBs with a reasonable degree of accuracy. A calculation method was developed by superposition principle to predict the lateral load-carrying capacity of SCBs for the engineering application. The concrete confined by steel plates and binding bars is under multi-axial compression; therefore, its shear strength was calculated by using the Guo-Wang concrete failure criterion. The shear strength of the steel plates of SCBs was calculated by using the von Mises yielding criterion without considering buckling. Results of the developed method are in good agreement with the testing and finite element results.

Effect of Annealing on Fly-Line Microstructure and Properties of Explosively Composited Stainless Steel-Stainless Steel Plates

Effect of annealing on "fly-line"(adiabatic sheer line) microstructure and properties of explosively composited stainless steel-stainless steel plates was studied.Results show that the flyline microstructure will diminish through certain annealing process,while the cracks formed from fly-line microstructure will remain.Therefore,fly-line microstructure can be considered as a plastic deformation microstructure and crack source s meanwhile its formation is considered as a special plastic deformation mechanism of metal under explosive load.

Effect of heat treatment on the microstructure and mechanical properties of structural steel–mild steel composite plates fabricated by explosion welding

Two dissimilar steel plates,structural steel and mild steel,were joined by explosion welding to form a composite.The composite was then heat-treated by quenching at 840℃ for 30 min followed by tempering at 200℃ for 3 h.The microstructure was investigated under an optical microscope and a scanning electron microscope.The mechanical properties were measured using Vickers microhardness and Charpy impact tests.The results show a deformed interface with typical wave features at the welding zone,but no defects were observed.Moreover,the ferrite in the parent plate in the weld zone was elongated due to the strong plastic deformation from the explosion.After heat treatment,the hardness of the flyer plate(structural steel)was over HV0.2800,while that of the parent plate(mild steel)was HV0.2200.The increase in hardness was due to the presence of martensite.Moreover,the average impact energy was increased from 18.5 to 44.0 J following heat treatment;this is because of the formation of recrystallized grains at the weld interface,which is due to the dynamic recovery and local recrystallization,and the strong elemental diffusion that occurred between the two plates.

Experimental and analytical study on seismic behavior of steel-concrete multienergy dissipation composite shear walls

In this paper, a steel-concrete multi-energy dissipation composite shear wall, comprised of steel-reinforced concrete （SRC） columns, steel plate （SP） deep beams, a concrete wall and energy dissipation strips, is proposed. In order to study the multi-energy dissipation behavior and restorability after an earthquake, two stages of low cyclic loading tests were carded out on ten test specimens. In the first stage, test on five specimens with different number of SP deep beams was carried out, and the test lasted until the displacement drift reached 2%. In the second stage, thin SPs were welded to both sides of the five specimens tested in the first stage, and the same test was carried out on the repaired specimens （designated as new specimens）. The load-bearing capacity, stiffness, ductility, hysteretic behavior and failure characteristics were analyzed for both stages and the results are discussed herein. Extrapolating from these results, strength calculation models and formulas are proposed herein and simulations using ABAQUS carried out, they show good agreement with the test results. The study demonstrates that SRC columns, SP deep beams, concrete wall and energy dissipation strips cooperate well and play an important role in energy dissipation. In addition, this study shows that the shear wall has good recoverability after an earthquake, and that the welding of thin SP＇s to repair a deformed wall is a practicable technique.

Experimental study and analysis on fatigue stiffness of RC beams strengthened with CFRP and steel plate

The objective of this work is to investigate the fatigue behavior of reinforced concrete(RC) beams strengthened with externally bonded carbon fiber reinforced polymer(CFRP) and steel plate. An experimental investigation and theoretical analysis were made on the law of deflection development and stiffness degradation, as well as the influence of fatigue load ranges. Test results indicate that the law of three-stage change under fatigue loading is followed by both midspan deflection and permanent deflection, which also have positive correlation with fatigue load amplitude. Fatigue stiffness of composite strengthened beams degrades gradually with the increasing of number of cycles. Based on the experimental results, a theoretical model by effective moment of inertia method is developed for calculating the sectional stiffness of such composite strengthened beams under fatigue loading, and the calculated results are in good agreement with the experimental results.

新型空心管状翼缘钢板组合梁设计理念与力学性能

工字钢组合梁桥正朝着少主梁、精简横向联系的方向发展。与传统多主梁复杂横向联系组合梁桥相比,双主梁桥由于采用了开口截面的结构形式,极大地削弱了其抗扭能力,在偏载作用下会产生较大的变形及翘曲应力,使钢主梁处于弯扭耦合的受力状态。空心管状翼缘钢板组合梁采用空心钢管取代传统的平板上翼缘,提升了稳定性,改善了结构性能。本文通过理论分析和实体有限元法的计算,研究了单梁在自重与横向风荷载作用下的稳定性;对非组合截面的组合体系下的稳定性能进行了分析与比较,并分离出扭转翘曲应力和纵向正应力,研究了不同跨径下扭转效应的影响。最后,对横向联系、加劲肋的影响进行了分析。研究结果表明,空心管状翼缘钢板组合梁桥扭转刚度大于传统工字形截面组合梁扭转刚度,自身横向稳定性好,并且需要较少的横向联系与加劲肋,可实现单梁吊装,避免采用过多临时加固及支撑措施,提高施工效率。

不同界面下梁端直剪型锚栓钢板剪切承载力试验研究

开展梁端直剪型锚栓钢板剪切承载力加固试验研究。试验序列包含1个对比试验段、5个剪切承载力加固试验段。试验参数包括界面条件和钢板高度。结果表明:受力过程中钢板与混凝土之间的黏结界面终会剥离,不同黏结界面不影响剪切承载力;增加钢板高度和配套的直剪型锚栓数量能有效提高混凝土梁的剪切承载力。直剪型锚栓钢板剪切承载力加固存在2种机制,约束机制通过限制斜裂缝宽度提高剪切承载力,而组合受力机制通过钢板将一部分剪力直接传入支座。加固钢板高度较小时以约束机制为主,加固钢板高度较大时,2种加固机制联合发挥作用。

焊接多腔双钢板-混凝土组合剪力墙抗震性能分析

大多数双钢板-混凝土组合剪力墙采用螺栓连接或焊接肋的方式使钢板和混凝土协同工作。然而,这种连接方式可能导致整体性和塑性变形效率较低,且制作复杂,焊接多腔双钢板-混凝土组合剪力墙能够有效地避免这些问题。为了深入研究焊接多腔双钢板-混凝土组合剪力墙的抗震性能,基于约束混凝土真三轴塑性-损伤本构模型和钢材弹塑性混合强化-韧性损伤本构模型,建立了组合剪力墙的精细化三维实体-壳模型,将模拟所得的滞回曲线、骨架曲线、刚度退化曲线、弹性刚度、承载力、累积耗能、等效阻尼粘滞系数和延性系数与已有拟静力试验结果相比较,发现两者吻合较好。分析结果表明:轴压比对组合剪力墙模型算例刚度和承载力的影响较小,而随剪跨比增大,组合剪力墙模型算例的刚度和承载力呈线性降低;轴压比对组合剪力墙模型算例总塑性耗能的影响较小,而剪跨比的影响较大,剪力墙总塑性耗能随剪跨比增大而降低;轴压比和剪跨比都不会改变算例各部件的耗能分配机制,即组合剪力墙模型算例以外钢板和内隔板耗能为主。

平钢板-UHPC组合桥面板纵向抗负弯性能试验研究

某大桥次边跨及中跨主梁为钢-UHPC组合梁,钢-UHPC组合梁的桥面板首次采用一种通过PBL剪力键将8 mm平钢板与15 cm的UHPC层连接起来的新型组合桥面体系。为了探究该桥新型钢-UHPC组合桥面板抗负弯矩性能与安全性,完成了2块足尺模型的静力性能试验,进行了桥梁整体受力和桥面板局部受力计算,以及桥面板抗负弯矩极限承载力构成分析。结果表明:UHPC名义开裂强度达8.90 MPa以上,其值远大于实桥荷载作用下UHPC层上缘的纵桥向最大拉应力,组合桥面板负弯矩抗裂性能良好,能满足工程需求;组合桥面板抗负弯承载力的计算,UHPC受拉本构宜采用三折线模型,抗负弯承载力简化计算的UHPC受拉区等效均布应力折减系数可取0.76,抗负弯承载力状态的受压钢板受力仍处于线弹性阶段,抗负弯破坏模式与抗正弯明显不同,为受拉钢筋拉断;PBL剪力键能保证了钢板与UHPC板整体共同受力;组合桥面板在负弯矩作用下的延性良好,裂宽增长缓慢,UHPC的名义极限强度达名义开裂强度的4.1倍以上,到达极限荷载后,组合板承载力没有明显下降。

低周反复荷载下T型双波纹钢板混凝土组合剪力墙受力性能试验研究

为研究低周反复荷载下T型双波纹钢板混凝土组合剪力墙的受力性能,对5个T型双波纹钢板混凝土组合剪力墙进行了低周反复加载试验。基于试验数据,分析了T型组合剪力墙的破坏模式、滞回曲线、变形能力及耗能能力,重点研究了边缘约束条件、波纹类型以及轴压比不同变化参数对T型组合剪力墙抗震性能指标的影响规律。研究结果表明:T型双波纹钢板混凝土组合剪力墙破坏模式主要有压屈破坏和压弯破坏两种;设置边缘约束构件是提高T型双波纹钢板混凝土组合剪力墙承载能力和变形能力的关键因素;纵向窄波纹钢板对内部混凝土的约束能力更强,在低周反复荷载下两者协同工作性更优,而横向窄波纹钢板试件强度退化最严重;采用全截面塑性设计方法进行T型双波纹钢板混凝土组合剪力墙正截面承载力计算,试验值与计算值吻合良好;T型双波纹钢板混凝土组合剪力墙具有较好的承载能力和变形能力,可适用于高层及超高层建筑结构中。

大壁厚不锈钢复合板压力容器建造关键技术及应用

在大壁厚不锈钢复合板压力容器的建造过程中,通过深入研究其技术要点和难点,优化焊接接头结构设计,成功形成了一套完整的新型建造关键技术。这套技术不仅优化了焊接接头结构,还创新了一系列施工方法,包括筒体加热卷制、接头坡口机加工、接管内壁耐蚀层TIG/FCAW自动堆焊、不锈钢衬管液氮冷套、球形封头内壁耐蚀层带极埋弧堆焊、纵环缝窄间隙埋弧自动焊以及管口接头马鞍型埋弧焊等。这些新型建造关键技术的应用,在提高压力容器质量效果的同时,也带来了显著的经济效益,为行业同类型设备的建造提供借鉴。在未来的研究中,可以进一步探索这些技术在其他领域的应用,以实现更广泛的技术交流和合作。同时,对于大壁厚不锈钢复合板压力容器的建造,仍需不断深入研究其材料特性、工艺参数和施工方法,以不断提高设备的性能和安全性。

大跨度公铁合建斜拉桥钢混板-桁组合梁关键节点空间受力特性

针对大跨度公铁合建斜拉桥—主跨808 m洪奇沥特大桥新型钢混板-桁组合梁的关键节点—辅助墩顶钢混节点,采用ANSYS软件建立钢桁-混凝土板组合梁部分节段细化的全桥多尺度有限元模型,分析边跨组合梁节点在受力最不利工况下的受力规律及传力特性,并讨论下弦杆等杆件截面等结构参数变化对节点受力、传力的影响规律。结果表明:最不利组合工况下,边跨组合梁辅助墩顶钢混节点处钢结构最不利Mises应力为265.9 MPa,混凝土局部最大名义拉应力为9.2 MPa,导致局部开裂而受力转移至钢结构;在辅助墩顶局部负弯矩影响下,内外节点板处应力总体呈“倒V”形分布,混凝土顶面及底面分别呈“鞍形”及“倒鞍”形分布;节点处下弦杆(含管内混凝土)、竖杆分别传递77.86%和40.15%荷载,为纵向、竖向主要传力构件;混凝土桥面厚度变化对自身应力影响明显,其厚度和下弦杆截面面积对纵向传力比影响大,竖杆截面面积对自身竖向传力影响相对明显;混凝土厚度及下弦杆、斜腹杆、竖杆截面为节点受力、传力的主要影响因素,其系数在0.8~1.1时,组合梁关键节点各构件应力及传力比均较为合理。

带PBL剪力键的钢芯板混凝土组合剪力墙低周往复加载试验研究

为研究带PBL剪力键的钢芯板混凝土组合剪力墙的抗震性能,对1个型钢混凝土组合剪力墙和4个钢芯板混凝土组合剪力墙进行了循环往复加载试验;观察带PBL剪力键的钢芯板混凝土组合剪力墙在水平循环荷载下的破坏全过程,并分析该类剪力墙的滞回特征、变形能力、承载能力、耗能性能、刚度和强度退化能力。结果表明:钢芯板混凝土组合剪力墙的破坏模式主要为弯曲型破坏,滞回曲线较为饱满;配置钢芯板的剪力墙承载力、延性性能和耗能能力较优;PBL剪力键的构造方式可保证钢芯板与混凝土之间的黏结性能完好,PBL剪力键平放会导致剪力墙出现沿PBL剪力键的水平通缝,影响剪力墙承载能力的发挥,建议采用PBL剪力键竖放的构造形式。

轻钢龙骨防火组合楼板梁板节点连接试验研究

轻钢龙骨防火组合楼板是一种新型的装配式楼板,因为自重较小,同时具有较大的承载力,板底板顶附层为防火楼板,具有较好的防火能力,该种楼板作为简支板直接放置于工字钢梁上,支座处无法传递负弯矩,因此在梁顶支座处会出现一条通缝,严重影响使用效果,同时简支板体系也不符合抗震规范的要求。本文提出一种新的支座处梁板节点连接方式,目的是通过合理连接,实现支座处能够传递负弯矩,由简支变为固结。试验采用液压千斤顶对试件施加静荷载,对11个全比例节点连接试件进行研究,考虑连接件搭接长度、连接件厚度、连接所用的自攻螺钉(螺栓)的数量,以及连接件尺寸对梁板连接节点承载力和挠度的影响,并对节点连接件与C型轻钢龙骨之间的变形协调能力做出了分析。研究表明,本文提出的以Z型钢为连接件的梁板节点连接方法安全可靠,可实现该新型楼板的双跨以及多跨连接。

装配式槽钢组合梁中开孔钢板连接件力学性能

为研究新型装配式双拼槽钢-混凝土组合梁中开孔钢板剪力连接件(PSP剪力连接件)的力学性能,设计7组标准试件并开展推出试验,对比分析不同参数PSP剪力连接件的受剪承载力和破坏模式。利用ABAQUS非线性有限元模型对PSP剪力连接件的破坏模式和受力机制进行数值模拟,并与试验结果对比验证计算结果的可靠性。在此基础上,进一步分析开孔钢板厚度、开孔直径、混凝土强度、穿孔钢筋及连接件间距对PSP剪力连接件力学性能的影响。结果表明:除10 mm厚度的PSP剪力连接件外,所有4 mm与6 mm厚度的PSP剪力连接件均发生明显弯曲变形,试件破坏时连接件周围混凝土均出现斜向裂缝;开孔直径和穿孔钢筋对受剪承载力和抗剪刚度影响较小,而增加开孔钢板厚度、混凝土强度能提高剪力连接件受剪承载力和抗剪刚度;对于双排PSP剪力连接件,增大连接件间距能够显著提高单排PSP剪力连接件平均承载力,当间距为250 mm时,单排平均承载力达到单个PSP剪力连接件的91.2%。根据试验及有限元荷载滑移曲线提出装配式双拼槽钢-混凝土组合梁中单个PSP连接件荷载滑移曲线计算公式,为装配式双拼槽钢混组合梁的设计提供参考。

复合(组合)消能器研究与应用

阐述复合(组合)消能器的定义,给出复合(组合)消能器实现途径与设计原则,介绍几种典型复合(组合)消能器的构造、原理、特点及应用情况,分析当前复合(组合)消能器研究与应用中存在的问题,指出复合(组合)消能器在未来创新研究与应用中应加强的研究方向。

中等跨径钢板组合梁截面布置优化

为了实现钢板组合梁的标准化设计,达到进一步推广应用的目的,以跨径30 m的先简支后桥面连续钢板组合梁桥为研究对象,结合目前中国钢-混组合梁桥的设计规范,以全桥造价及全桥钢材用量为目标函数,以钢板组合梁截面尺寸布置参数和主梁数量为设计变量,并以应力、变形、局部稳定和规范构造要求为约束条件,建立钢板组合梁截面参数的优化模型,并采用遗传算法展开优化分析.优化结果表明:所提算法稳定可靠、效率高,依托工程的结构截面布置有较大的优化空间.当桥宽和车道布置不变时,采用6梁式截面的全桥造价最少,相对原始设计截面可节省约13%的费用;采用4梁式截面的全桥钢材用量最少,为128.65 kg/m^(2),相对原始设计截面可节省约27%的钢材用量.优化结果可为中等跨径钢板组合梁桥的截面设计提供参考.通过经济性分析发现,当主梁间距分别取约2.3、3.2、4.8 m时,跨高比的经济取值分别为20~23、18~21、14~17.

装配式带夹芯保温槽型玻璃钢-钢板-槽钢-混凝土组合剪力墙轴压性能研究

提出一种装配式带夹芯保温槽型玻璃钢-钢板-槽钢-混凝土组合剪力墙,设计3个具有不同配筋形式和混凝土种类的墙板试件进行轴心受压试验,获得墙板在轴压作用下的破坏模式、荷载-位移曲线、荷载-应变曲线、承载力储备系数、延性系数、材料利用率等性能指标。通过ABAQUS有限元分析软件对墙板进行参数化分析,研究内嵌钢板强度和厚度对其轴压性能的影响。结果表明,墙板具有良好的承载力储备能力和延性性能;混凝土中掺入1%体积比的钢纤维可显著提高墙板内混凝土的抗拉性能,使混凝土强度得到更加充分的利用,布置钢筋可以显著提高墙板延性;墙板的承载力和延性随内嵌钢板厚度和强度的增加而增大,强度为Q355、厚度为4、6mm时,墙板材料利用率更高。提出适用于该类墙板的轴压承载力设计公式,考虑钢板屈曲和截面组合效应的墙板轴心受压承载力设计公式计算结果较精确。