A series of lanthanum doped meosoporous MCM-41 （LaxM41, x is Si/La molar ratio） was prepared by sol-gel method. The surface structure of the materials was investigated with X-ray diffraction and N2 adsorption/desorp...A series of lanthanum doped meosoporous MCM-41 （LaxM41, x is Si/La molar ratio） was prepared by sol-gel method. The surface structure of the materials was investigated with X-ray diffraction and N2 adsorption/desorption technique. The content of La in the materials was determined by ICE It was found that the La content of La25M41, La50M41 and La100M41 was 7.53%, 3.89% and 2.32%, respectively. The phosphate adsorption capacities increased with increasing amount of La incorporation. With 0.40 g La25M41 99.7% phosphate could be removed. The effects of Si/La molar ratio, LaxM41 dose, pH, initial concentration of phosphate solution, co-ions on phosphate adsorption were also evaluated. The phosphate adsorption kinetics of LaxM41 could be well-described by the pseudo second-order model, and Langmuir isotherm fit equilibrium data much better than the Freundlich isotherm.展开更多
Phosphate removal from aqueous waste streams is an important approach to control the eutrophication downstream bodies of water. A Fe（Ⅲ） coordinated amino-functionalized silicate adsorbent for phosphate adsorption w...Phosphate removal from aqueous waste streams is an important approach to control the eutrophication downstream bodies of water. A Fe（Ⅲ） coordinated amino-functionalized silicate adsorbent for phosphate adsorption was synthesized by a post-grafting and metal cation incorporation process. The surface structure of the adsorbent was characterized by X-ray diffraction, N2 adsoropion/desoprotion technique, and Fourier transform infrared spectroscopy. The experimental results showed that the adsorption equilibrium data were well fitted to the Langmuir equation. The maximum adsorption capacity of the modified silicate material was 51.8 mg/g. The kinetic data from the adsorption of phosphate were fitted to pseudo second-order model. The phosphate adsorption was highly pH dependent and the relatively high removal of phosphate fell within the pH range 3.0-6.0. The coexistence of other anions in solutions has an adverse effect on phosphate adsorption; a decrease in adsorption capacity followed the order of exogenous anions： F^- 〉 SO4^2- 〉 NO3^- 〉 Cl^-. In addition, the adsorbed phosphate could be desorbed by NaOH solutions. This silicate adsorbent with a large adsorption capacity and relatively high selectivity could be utilized for the removal of phosphate from aqueous waste streams or in aquatic environment.展开更多
基金supported by the National Major Research Plan for Water Pollution Control and Treatment of China (No.2008ZX07101-015)
文摘A series of lanthanum doped meosoporous MCM-41 （LaxM41, x is Si/La molar ratio） was prepared by sol-gel method. The surface structure of the materials was investigated with X-ray diffraction and N2 adsorption/desorption technique. The content of La in the materials was determined by ICE It was found that the La content of La25M41, La50M41 and La100M41 was 7.53%, 3.89% and 2.32%, respectively. The phosphate adsorption capacities increased with increasing amount of La incorporation. With 0.40 g La25M41 99.7% phosphate could be removed. The effects of Si/La molar ratio, LaxM41 dose, pH, initial concentration of phosphate solution, co-ions on phosphate adsorption were also evaluated. The phosphate adsorption kinetics of LaxM41 could be well-described by the pseudo second-order model, and Langmuir isotherm fit equilibrium data much better than the Freundlich isotherm.
基金supported by the National Major Research Plan for Water Pollution Control and Treatment of China(No. 2009ZX07101-015,2009ZX07105-003)
文摘Phosphate removal from aqueous waste streams is an important approach to control the eutrophication downstream bodies of water. A Fe（Ⅲ） coordinated amino-functionalized silicate adsorbent for phosphate adsorption was synthesized by a post-grafting and metal cation incorporation process. The surface structure of the adsorbent was characterized by X-ray diffraction, N2 adsoropion/desoprotion technique, and Fourier transform infrared spectroscopy. The experimental results showed that the adsorption equilibrium data were well fitted to the Langmuir equation. The maximum adsorption capacity of the modified silicate material was 51.8 mg/g. The kinetic data from the adsorption of phosphate were fitted to pseudo second-order model. The phosphate adsorption was highly pH dependent and the relatively high removal of phosphate fell within the pH range 3.0-6.0. The coexistence of other anions in solutions has an adverse effect on phosphate adsorption; a decrease in adsorption capacity followed the order of exogenous anions： F^- 〉 SO4^2- 〉 NO3^- 〉 Cl^-. In addition, the adsorbed phosphate could be desorbed by NaOH solutions. This silicate adsorbent with a large adsorption capacity and relatively high selectivity could be utilized for the removal of phosphate from aqueous waste streams or in aquatic environment.
