A compound varifocal lens based on electromagnetic drive technology is designed and fabricated, where the polydimethylsiloxane(PDMS) film acts as a driving component, while the PDMS biconvex lens and the plane-concave...A compound varifocal lens based on electromagnetic drive technology is designed and fabricated, where the polydimethylsiloxane(PDMS) film acts as a driving component, while the PDMS biconvex lens and the plane-concave lens form a coaxial compound lens system. The plane-concave lens equipped with driving coils is installed directly above the PDMS lens surrounded by the annular magnet. When different currents are applied, the annular magnet moves up and down, driving the PDMS film to undergo elastic deformation, and then resulting in longitudinal movement of the PDMS lens. The position change of the PDMS lens changes the focal length of the compound lens system. To verify the feasibility and practicability of this design, a prototype of our compound lens system is fabricated in experiment. Our proposed compound lens shows that its zoom ability reaches 9.28 mm when the current ranges from -0.20 A to 0.21 A.展开更多
Background: Cochlear implants (CI) are widely used to restore hearing in people with severe to profound hearing loss. However, optimizing CI performance, especially in difficult listening environments with background ...Background: Cochlear implants (CI) are widely used to restore hearing in people with severe to profound hearing loss. However, optimizing CI performance, especially in difficult listening environments with background noise, remains a major challenge. Understanding the influence of factors such as sound source position and electrode placement on CI stimulation patterns is critical to improving auditory perception. Methods: In this study, an analysis was conducted to investigate the influence of sound source position and electrode placement on CI stimulation patterns under noisy conditions. For this purpose, a special measurement setup with a CI speech processor-microphone test box was used to simulate realistic listening scenarios and measure CI performance. Results: The results show that the effectiveness of CI noise reduction systems is influenced by factors such as the position of the sound source and electrode placement. In particular, the beamforming ultra zoom mode showed significantly better noise reduction than the omnidirectional mode, especially under real listening conditions. Furthermore, differences in electrode responses indicate individual variability in the CI user experience, highlighting the importance of personalized fitting algorithms. Conclusions: The results demonstrate the importance of considering environmental factors and individual differences when optimizing CI performance. Future research efforts should focus on the development of personalized fitting algorithms and the exploration of innovative strategies, such as the integration of artificial intelligence, to improve CI functionality in different listening environments. This study contributes to our understanding of CI stimulation patterns and lays the foundation for improving auditory perception in CI users.展开更多
文摘A compound varifocal lens based on electromagnetic drive technology is designed and fabricated, where the polydimethylsiloxane(PDMS) film acts as a driving component, while the PDMS biconvex lens and the plane-concave lens form a coaxial compound lens system. The plane-concave lens equipped with driving coils is installed directly above the PDMS lens surrounded by the annular magnet. When different currents are applied, the annular magnet moves up and down, driving the PDMS film to undergo elastic deformation, and then resulting in longitudinal movement of the PDMS lens. The position change of the PDMS lens changes the focal length of the compound lens system. To verify the feasibility and practicability of this design, a prototype of our compound lens system is fabricated in experiment. Our proposed compound lens shows that its zoom ability reaches 9.28 mm when the current ranges from -0.20 A to 0.21 A.
文摘Background: Cochlear implants (CI) are widely used to restore hearing in people with severe to profound hearing loss. However, optimizing CI performance, especially in difficult listening environments with background noise, remains a major challenge. Understanding the influence of factors such as sound source position and electrode placement on CI stimulation patterns is critical to improving auditory perception. Methods: In this study, an analysis was conducted to investigate the influence of sound source position and electrode placement on CI stimulation patterns under noisy conditions. For this purpose, a special measurement setup with a CI speech processor-microphone test box was used to simulate realistic listening scenarios and measure CI performance. Results: The results show that the effectiveness of CI noise reduction systems is influenced by factors such as the position of the sound source and electrode placement. In particular, the beamforming ultra zoom mode showed significantly better noise reduction than the omnidirectional mode, especially under real listening conditions. Furthermore, differences in electrode responses indicate individual variability in the CI user experience, highlighting the importance of personalized fitting algorithms. Conclusions: The results demonstrate the importance of considering environmental factors and individual differences when optimizing CI performance. Future research efforts should focus on the development of personalized fitting algorithms and the exploration of innovative strategies, such as the integration of artificial intelligence, to improve CI functionality in different listening environments. This study contributes to our understanding of CI stimulation patterns and lays the foundation for improving auditory perception in CI users.