In this work,a novel alcohol alkali hydrolysis method was explored for the preparation of terephthalic acid(TPA)from waste polyethylene terephthalate(PET).First,a series of single factor experiments on the depolymeriz...In this work,a novel alcohol alkali hydrolysis method was explored for the preparation of terephthalic acid(TPA)from waste polyethylene terephthalate(PET).First,a series of single factor experiments on the depolymerization rate of waste PET bottles and the yield of TPA were conducted to determine the optimized experimental conditions,in terms of reaction time,reaction temperature,dosage of ethylene glycol and sodium bicarbonate,amount of distilled water and stirring rate.Then IR spectra and elemental analysis were carried out for the characterization of obtained product.Under optimal experimental conditions,over 98%PET can be depolymerized into the target product(TPA)and the purity and yield of TPA are over 97%and 94%,respectively.Both the experimental and analytical results support a feasible process for the preparation of TPA from waste PET.It is expected that this alcohol alkali hydrolysis method can promise an effective way for the sustainable recycling of waste PET.展开更多
The production of environmental friendly emulsion paint is of great significance. Vacuum steam stripping of methyl isobutyl ketone （MIBK） and methyl ethyl ketone （MEK） from cathodic electrophoretic emulsion was st...The production of environmental friendly emulsion paint is of great significance. Vacuum steam stripping of methyl isobutyl ketone （MIBK） and methyl ethyl ketone （MEK） from cathodic electrophoretic emulsion was studied. The effects of mass ratio of vapor to feed （V/F）, vacuum degree and feed temperature on removal rate of MIBK and MEK, emulsion size and solid volume fraction of the emulsion were investigated, and the removal of MIBK and MEK from cathodic electrophoretic emulsion by vacuum desorption was also studied. The results show that removal rates of both MIBK and MEK increase with the increase of V/F, vacuum degree and feed temperature. Removal rates of MIBK and MEK are 98.3% and 93.6%, respectively, at the operating condition V/F of 0.7, feed temperature of 27℃ and vacuum degree of 90 kPa. The emulsion size of cathodic electrophoretic emulsion increases slightly with feed temperature when temperature is below 42 ℃, and increases rapidly with feed temperature when temperature is above 42℃. Solid volume fraction increases by 10% as vacuum degree increases from 0 to 90 kPa at V/F of 0.7 and feed temperature of 27 ℃. Compared with vacuum desorption, vacuum steam stripping can get a higher removal rate of MIBK and MEK under the same feed flow, vacuum degree and feed temperature.展开更多
基金Project(2016TP1007)supported by the Hunan Provincial Science and Technology Plan,China
文摘In this work,a novel alcohol alkali hydrolysis method was explored for the preparation of terephthalic acid(TPA)from waste polyethylene terephthalate(PET).First,a series of single factor experiments on the depolymerization rate of waste PET bottles and the yield of TPA were conducted to determine the optimized experimental conditions,in terms of reaction time,reaction temperature,dosage of ethylene glycol and sodium bicarbonate,amount of distilled water and stirring rate.Then IR spectra and elemental analysis were carried out for the characterization of obtained product.Under optimal experimental conditions,over 98%PET can be depolymerized into the target product(TPA)and the purity and yield of TPA are over 97%and 94%,respectively.Both the experimental and analytical results support a feasible process for the preparation of TPA from waste PET.It is expected that this alcohol alkali hydrolysis method can promise an effective way for the sustainable recycling of waste PET.
基金Project(21176264)supported by the National Natural Science Foundation of ChinaProject(ZL110414)supported by the Undergraduate Free Exploration Innovation Foundation of Central South University,China
文摘The production of environmental friendly emulsion paint is of great significance. Vacuum steam stripping of methyl isobutyl ketone （MIBK） and methyl ethyl ketone （MEK） from cathodic electrophoretic emulsion was studied. The effects of mass ratio of vapor to feed （V/F）, vacuum degree and feed temperature on removal rate of MIBK and MEK, emulsion size and solid volume fraction of the emulsion were investigated, and the removal of MIBK and MEK from cathodic electrophoretic emulsion by vacuum desorption was also studied. The results show that removal rates of both MIBK and MEK increase with the increase of V/F, vacuum degree and feed temperature. Removal rates of MIBK and MEK are 98.3% and 93.6%, respectively, at the operating condition V/F of 0.7, feed temperature of 27℃ and vacuum degree of 90 kPa. The emulsion size of cathodic electrophoretic emulsion increases slightly with feed temperature when temperature is below 42 ℃, and increases rapidly with feed temperature when temperature is above 42℃. Solid volume fraction increases by 10% as vacuum degree increases from 0 to 90 kPa at V/F of 0.7 and feed temperature of 27 ℃. Compared with vacuum desorption, vacuum steam stripping can get a higher removal rate of MIBK and MEK under the same feed flow, vacuum degree and feed temperature.
