目的:本研究通过水热法合成碘氧化铋(BiOI),采用一步混合溶剂热法制备SiO2@BiOI,将其修饰在聚苯胺(PANI)上,制备SiO2@BiOI/PANI复合材料,从而对葡萄糖进行特异性光电化学检测。在可见光照射下,具有高比表面积且表面带有微小的空隙结构的...目的:本研究通过水热法合成碘氧化铋(BiOI),采用一步混合溶剂热法制备SiO2@BiOI,将其修饰在聚苯胺(PANI)上,制备SiO2@BiOI/PANI复合材料,从而对葡萄糖进行特异性光电化学检测。在可见光照射下,具有高比表面积且表面带有微小的空隙结构的SiO2微球可以有效地吸收光能并产生激发态,逐层堆叠的BiOI纳米花材料能够将光能产生光生电子–空穴对,两者进行复合有助于将产生的电子–空穴对有效分离和传输,提高光电流响应。PANI具有优异的导电性能,能够促进电子转移,有效抑制电子–空穴对的复合,从而实现对葡萄糖的超灵敏检测。该光电传感器检测葡萄糖时的浓度范围为5~200 μmol/L,检出限为1.67 μmol/L,表明SiO2@BiOI/PANI对葡萄糖具有较好的检测效果。该SiO2@BiOI/PANI光电化学传感器具有选择性良好、响应时间快、灵敏度高等优点,对葡萄糖的检测具有重要意义,期待其成为葡萄糖检测领域中一种具有潜力的新型传感器技术。Purpose: In this study, bismuth iodide (BiOI) was synthesised by a hydrothermal method, and SiO2@BiOI was prepared by a one-step hybrid solvothermal method, and then modified on polyaniline (PANI) to prepare SiO2@BiOI/PANI composites for the specific photoelectrochemical detection of glucose. Under visible light irradiation, SiO2 microspheres with high specific surface area and tiny void structure on the surface can effectively absorb light energy and generate excited states, and the layer-by-layer stacking of BiOI nanoflowers can generate photogenerated electron-hole pairs from light energy, and the composite of the two can help to efficiently separate and transport the generated electron-hole pairs to improve the response to photocurrent. PANI has excellent electrical conductivity, which can promote electron transfer and effectively inhibit the complexation of electron-hole pairs, thus achieving ultra-sensitive detection of glucose. The photoelectric sensor detected glucose in the concentration range of 5~200 μmol/L with a detection limit of 1.67 μmol/L, indicating that SiO2@BiOI/PANI has a good detection effect on glucose. The SiO2@BiOI/PANI photoelectrochemical sensor has the advantages of good selectivity, fast response time, high sensitivity, etc., which is of great significance for the detection of glucose, and is expected to become a new sensor technology with potential in the field of glucose detection.展开更多
目的:本研究基于Ag、Au贵金属纳米材料的局域表面等离子体共振效应(LSPR)以及优秀的导电能力,在合成好的Ag线表面镀上一层Au,成功合成AuAg线复合材料。用表面积大的还原氧化石墨烯–氮化碳(rGO-C3N4)复合材料负载AuAg线,形成AuAg/rGO-C...目的:本研究基于Ag、Au贵金属纳米材料的局域表面等离子体共振效应(LSPR)以及优秀的导电能力,在合成好的Ag线表面镀上一层Au,成功合成AuAg线复合材料。用表面积大的还原氧化石墨烯–氮化碳(rGO-C3N4)复合材料负载AuAg线,形成AuAg/rGO-C3N4复合材料,并用于尿酸(Uric Acid, UA)的光电化学检测。在可见光照下,rGO-C3N4吸收光子,电子(e−)发生跃迁,从价带跃迁到导带并转移到外电路产生光电流,而空穴(h+)会转移到材料表面,h+氧化待测物溶液中的尿酸并产生e−转移到外电路,电子流动产生光电流。由于rGO纳米片不仅具有较强的吸附能力,还有较大的表面积,可以吸附更多的尿酸到材料表面进行氧化,以增强光电流。由于AuAg线有着较高的电导率以及LSPR效应,可以加速电化学反应速率,抑制高能载流子的重组,可以提高光电流强度,最终实现对尿酸的超灵敏检测。该光电传感器检测尿酸时的浓度范围为0.5~200 μmol∙L−1,检出限为0.17 μmol∙L−1,表明基于AuAg/rGO-C3N4复合材料的光电化学传感器对尿酸具有较好的检测效果。该光电化学传感器具有制作简单、操作便捷、检测范围大等优点,为今后这类生物小分子检测传感器的构建提供了思路。Purpose: In this study, based on the Localized Surface Plasmon Resonance (LSPR) effect of Au and Ag noble metal nanomaterials and the good electrical conductivity, a layer of Au was coated on the surface of the synthesized Ag wire, and the AuAg NWs composites were successfully synthesized. AuAg NWs were loaded with reduced graphene-carbon nitride (rGO-C3N4) composites with large surface area to form AuAg/rGO-C3N4 composites for photoelectrochemical detection of Uric Acid (UA). Under visible light, rGO-C3N4 absorbs photons, electrons (e−) transition from valence band to conduction band and transfer to the outer circuit to generate photocurrent, while holes (h+) transfer to the surface of the material, h+ oxidizes UA in the analyte solution and generates e− transferred to the outer circuit, and electron flow generates photocurrent. Due to the strong adsorption capacity and large surface area of rGO nanosheets, more UA can be adsorbed to the surface of the material for oxidation to enhance the photocurrent. Due to the high conductivity and LSPR effect of AuAg NWs, it can accelerate the electrochemical reaction rate, inhibit the recombination of high-energy carriers, improve the photocurrent intensity, and finally achieve ultra-sensitive detection of UA. The concentration range of UA detected by the photoelectric sensor was 0.5~200 μmol∙L−1, and the detection limit was 0.17 μmol∙L−1, indicating that the photoelectrochemical sensor based on AuAg/rGO-C3N4 composites had a good detection effect on uric acid. The photoelectrochemical sensor has the advantages of simple fabrication, convenient operation and large detection range, which provides a way for the construction of this kind of biological small molecule detection sensor in the future.展开更多
本研究对多巴胺(DA)进行光电化学检测,通过制备二氧化硅悬浮液(SiO2)、还原氧化石墨烯(rGO)、溴氧化铋(BiOBr)三种材料进而制备SiO2@BiOBr/rGO复合材料并构筑光电化学传感器,SiO2@BiOBr/rGO在有光时检测多巴胺时有显著的光电流响应。石...本研究对多巴胺(DA)进行光电化学检测,通过制备二氧化硅悬浮液(SiO2)、还原氧化石墨烯(rGO)、溴氧化铋(BiOBr)三种材料进而制备SiO2@BiOBr/rGO复合材料并构筑光电化学传感器,SiO2@BiOBr/rGO在有光时检测多巴胺时有显著的光电流响应。石墨烯具有优异的导电性和显著的机械强度。二氧化硅(SiO2)是一种成本低、高生物相容性、热稳定性、透光性能好、带隙窄的材料。BiOBr作为一种典型的半导体光电材料,拥有独特的层状四方结构,花状BiOBr由层状结构组成,有利于进一步抑制空穴–电荷重组,可提高其光电性能。该光电传感器检测多巴胺时的浓度范围为2~300 μmol/L,检出限为0.67 μmol/L,表明传感器对多巴胺有较好的检测效果。该SiO2@BiOBr/rGO光电化学传感器具有稳定性好、灵敏度高等优点,对多巴胺的检测具有重要的意义,希望其在监测细胞内多巴胺浓度水平方面具有广阔的应用前景。This study aimed to prepare SiO2@BiOBr/rGO composite materials by combining SiO2 suspension, reduced graphene oxide (rGO), and bismuth oxybromide (BiOBr) for the construction of relevant photoelectrochemical sensors to detect dopamine (DA). Under visible light irradiation, SiO2@BiOBr/ rGO exhibited a significant photocurrent response during dopamine detection. Graphene has excellent electrical conductivity and remarkable mechanical strength. SiO2 has low production cost, high biocompatibility, thermal stability, good transparency, and a narrow-forbidden bandgap. As a typical semiconductor photoelectric material, BiOBr has a unique layered tetragonal structure. Flower-like BiOBr is composed of layered structures, which is conducive to further suppressing hole-charge recombination and improving its photoelectric performance. The concentration range of dopamine detected by this photoelectric sensor was 2~300 μmol/L, with a detection limit of 0.67 μmol/L, indicating that the sensor had a good detection effect on dopamine. This SiO2@BiOBr/rGO photoelectrochemical sensor has the advantages of good stability, high sensitivity and so on, and is of great significance for the detection of dopamine. It is expected to have broad application prospects in monitoring intracellular dopamine concentration levels.展开更多
氢能源被认为是一种环保的二次能源。电解水生成氢气,这一过程不仅环保,而且拥有极大的潜力。典型的水电解程序要求一个相对较高的电压来完成分解过程。糠醛与电解水的热动力学分解特性相比较,表现更为优越,因此在电解氢的生产过程中,...氢能源被认为是一种环保的二次能源。电解水生成氢气,这一过程不仅环保,而且拥有极大的潜力。典型的水电解程序要求一个相对较高的电压来完成分解过程。糠醛与电解水的热动力学分解特性相比较,表现更为优越,因此在电解氢的生产过程中,采用糠醛可以显著减少能耗。糠醛氧化催化剂的高性能制备,成为当前糠醛电解氢气生产领域关注的核心。本文开篇阐述了电催化氧化糠醛的研究背景。近期研究对糠醛电化学氧化催化剂的进展进行了梳理,涵盖了贵金属及金属氧化物两类催化剂的研究情况。对未来的研究愿景进行了描绘,针对糠醛电化学氧化催化剂的领域。Hydrogen serves as a clean and eco-conscious alternative energy source. Electrolytic water splitting is a method of hydrogen generation that offers significant environmental benefits and exhibits a wide range of potential applications. However, conventional water electrolysis necessitates a substantial theoretical voltage for decomposition. Furfural exhibits superior thermodynamic properties for decomposition compared to water electrolysis, thereby offering a significant potential to diminish energy consumption during hydrogen production via electrolytic processes. The development of high-performance furfural oxidation catalysts represents a significant focus in the field of furfural electrolysis for hydrogen production research. This study presents an exploration of the electrocatalytic oxidation of furfural. This study collates and reviews the current progress in the field of furfural electrochemical oxidation, encompassing both noble metal and metal oxide catalysts, as documented in recent scholarly contributions. Finally, potential avenues for future research into the electrochemical oxidation catalyst for furfural are outlined.展开更多
文摘目的:本研究通过水热法合成碘氧化铋(BiOI),采用一步混合溶剂热法制备SiO2@BiOI,将其修饰在聚苯胺(PANI)上,制备SiO2@BiOI/PANI复合材料,从而对葡萄糖进行特异性光电化学检测。在可见光照射下,具有高比表面积且表面带有微小的空隙结构的SiO2微球可以有效地吸收光能并产生激发态,逐层堆叠的BiOI纳米花材料能够将光能产生光生电子–空穴对,两者进行复合有助于将产生的电子–空穴对有效分离和传输,提高光电流响应。PANI具有优异的导电性能,能够促进电子转移,有效抑制电子–空穴对的复合,从而实现对葡萄糖的超灵敏检测。该光电传感器检测葡萄糖时的浓度范围为5~200 μmol/L,检出限为1.67 μmol/L,表明SiO2@BiOI/PANI对葡萄糖具有较好的检测效果。该SiO2@BiOI/PANI光电化学传感器具有选择性良好、响应时间快、灵敏度高等优点,对葡萄糖的检测具有重要意义,期待其成为葡萄糖检测领域中一种具有潜力的新型传感器技术。Purpose: In this study, bismuth iodide (BiOI) was synthesised by a hydrothermal method, and SiO2@BiOI was prepared by a one-step hybrid solvothermal method, and then modified on polyaniline (PANI) to prepare SiO2@BiOI/PANI composites for the specific photoelectrochemical detection of glucose. Under visible light irradiation, SiO2 microspheres with high specific surface area and tiny void structure on the surface can effectively absorb light energy and generate excited states, and the layer-by-layer stacking of BiOI nanoflowers can generate photogenerated electron-hole pairs from light energy, and the composite of the two can help to efficiently separate and transport the generated electron-hole pairs to improve the response to photocurrent. PANI has excellent electrical conductivity, which can promote electron transfer and effectively inhibit the complexation of electron-hole pairs, thus achieving ultra-sensitive detection of glucose. The photoelectric sensor detected glucose in the concentration range of 5~200 μmol/L with a detection limit of 1.67 μmol/L, indicating that SiO2@BiOI/PANI has a good detection effect on glucose. The SiO2@BiOI/PANI photoelectrochemical sensor has the advantages of good selectivity, fast response time, high sensitivity, etc., which is of great significance for the detection of glucose, and is expected to become a new sensor technology with potential in the field of glucose detection.
文摘目的:本研究基于Ag、Au贵金属纳米材料的局域表面等离子体共振效应(LSPR)以及优秀的导电能力,在合成好的Ag线表面镀上一层Au,成功合成AuAg线复合材料。用表面积大的还原氧化石墨烯–氮化碳(rGO-C3N4)复合材料负载AuAg线,形成AuAg/rGO-C3N4复合材料,并用于尿酸(Uric Acid, UA)的光电化学检测。在可见光照下,rGO-C3N4吸收光子,电子(e−)发生跃迁,从价带跃迁到导带并转移到外电路产生光电流,而空穴(h+)会转移到材料表面,h+氧化待测物溶液中的尿酸并产生e−转移到外电路,电子流动产生光电流。由于rGO纳米片不仅具有较强的吸附能力,还有较大的表面积,可以吸附更多的尿酸到材料表面进行氧化,以增强光电流。由于AuAg线有着较高的电导率以及LSPR效应,可以加速电化学反应速率,抑制高能载流子的重组,可以提高光电流强度,最终实现对尿酸的超灵敏检测。该光电传感器检测尿酸时的浓度范围为0.5~200 μmol∙L−1,检出限为0.17 μmol∙L−1,表明基于AuAg/rGO-C3N4复合材料的光电化学传感器对尿酸具有较好的检测效果。该光电化学传感器具有制作简单、操作便捷、检测范围大等优点,为今后这类生物小分子检测传感器的构建提供了思路。Purpose: In this study, based on the Localized Surface Plasmon Resonance (LSPR) effect of Au and Ag noble metal nanomaterials and the good electrical conductivity, a layer of Au was coated on the surface of the synthesized Ag wire, and the AuAg NWs composites were successfully synthesized. AuAg NWs were loaded with reduced graphene-carbon nitride (rGO-C3N4) composites with large surface area to form AuAg/rGO-C3N4 composites for photoelectrochemical detection of Uric Acid (UA). Under visible light, rGO-C3N4 absorbs photons, electrons (e−) transition from valence band to conduction band and transfer to the outer circuit to generate photocurrent, while holes (h+) transfer to the surface of the material, h+ oxidizes UA in the analyte solution and generates e− transferred to the outer circuit, and electron flow generates photocurrent. Due to the strong adsorption capacity and large surface area of rGO nanosheets, more UA can be adsorbed to the surface of the material for oxidation to enhance the photocurrent. Due to the high conductivity and LSPR effect of AuAg NWs, it can accelerate the electrochemical reaction rate, inhibit the recombination of high-energy carriers, improve the photocurrent intensity, and finally achieve ultra-sensitive detection of UA. The concentration range of UA detected by the photoelectric sensor was 0.5~200 μmol∙L−1, and the detection limit was 0.17 μmol∙L−1, indicating that the photoelectrochemical sensor based on AuAg/rGO-C3N4 composites had a good detection effect on uric acid. The photoelectrochemical sensor has the advantages of simple fabrication, convenient operation and large detection range, which provides a way for the construction of this kind of biological small molecule detection sensor in the future.
文摘本研究对多巴胺(DA)进行光电化学检测,通过制备二氧化硅悬浮液(SiO2)、还原氧化石墨烯(rGO)、溴氧化铋(BiOBr)三种材料进而制备SiO2@BiOBr/rGO复合材料并构筑光电化学传感器,SiO2@BiOBr/rGO在有光时检测多巴胺时有显著的光电流响应。石墨烯具有优异的导电性和显著的机械强度。二氧化硅(SiO2)是一种成本低、高生物相容性、热稳定性、透光性能好、带隙窄的材料。BiOBr作为一种典型的半导体光电材料,拥有独特的层状四方结构,花状BiOBr由层状结构组成,有利于进一步抑制空穴–电荷重组,可提高其光电性能。该光电传感器检测多巴胺时的浓度范围为2~300 μmol/L,检出限为0.67 μmol/L,表明传感器对多巴胺有较好的检测效果。该SiO2@BiOBr/rGO光电化学传感器具有稳定性好、灵敏度高等优点,对多巴胺的检测具有重要的意义,希望其在监测细胞内多巴胺浓度水平方面具有广阔的应用前景。This study aimed to prepare SiO2@BiOBr/rGO composite materials by combining SiO2 suspension, reduced graphene oxide (rGO), and bismuth oxybromide (BiOBr) for the construction of relevant photoelectrochemical sensors to detect dopamine (DA). Under visible light irradiation, SiO2@BiOBr/ rGO exhibited a significant photocurrent response during dopamine detection. Graphene has excellent electrical conductivity and remarkable mechanical strength. SiO2 has low production cost, high biocompatibility, thermal stability, good transparency, and a narrow-forbidden bandgap. As a typical semiconductor photoelectric material, BiOBr has a unique layered tetragonal structure. Flower-like BiOBr is composed of layered structures, which is conducive to further suppressing hole-charge recombination and improving its photoelectric performance. The concentration range of dopamine detected by this photoelectric sensor was 2~300 μmol/L, with a detection limit of 0.67 μmol/L, indicating that the sensor had a good detection effect on dopamine. This SiO2@BiOBr/rGO photoelectrochemical sensor has the advantages of good stability, high sensitivity and so on, and is of great significance for the detection of dopamine. It is expected to have broad application prospects in monitoring intracellular dopamine concentration levels.
文摘氢能源被认为是一种环保的二次能源。电解水生成氢气,这一过程不仅环保,而且拥有极大的潜力。典型的水电解程序要求一个相对较高的电压来完成分解过程。糠醛与电解水的热动力学分解特性相比较,表现更为优越,因此在电解氢的生产过程中,采用糠醛可以显著减少能耗。糠醛氧化催化剂的高性能制备,成为当前糠醛电解氢气生产领域关注的核心。本文开篇阐述了电催化氧化糠醛的研究背景。近期研究对糠醛电化学氧化催化剂的进展进行了梳理,涵盖了贵金属及金属氧化物两类催化剂的研究情况。对未来的研究愿景进行了描绘,针对糠醛电化学氧化催化剂的领域。Hydrogen serves as a clean and eco-conscious alternative energy source. Electrolytic water splitting is a method of hydrogen generation that offers significant environmental benefits and exhibits a wide range of potential applications. However, conventional water electrolysis necessitates a substantial theoretical voltage for decomposition. Furfural exhibits superior thermodynamic properties for decomposition compared to water electrolysis, thereby offering a significant potential to diminish energy consumption during hydrogen production via electrolytic processes. The development of high-performance furfural oxidation catalysts represents a significant focus in the field of furfural electrolysis for hydrogen production research. This study presents an exploration of the electrocatalytic oxidation of furfural. This study collates and reviews the current progress in the field of furfural electrochemical oxidation, encompassing both noble metal and metal oxide catalysts, as documented in recent scholarly contributions. Finally, potential avenues for future research into the electrochemical oxidation catalyst for furfural are outlined.
