In modern fossil and nuclear power plants,the components are subjected to creep,fatigue,and creep-fatigue(CF)due to frequent start-up and shut-down operations at high temperatures.The CF interaction on the in-service ...In modern fossil and nuclear power plants,the components are subjected to creep,fatigue,and creep-fatigue(CF)due to frequent start-up and shut-down operations at high temperatures.The CF interaction on the in-service P92 steel welded joint was investigated by strain-controlled CF tests with different dwell times of 30,120,300,600 and 900 s at 650℃.Based on the observations of the fracture surface by scanning electron microscope(SEM),the character-istic microstructure of fatigue-induced damage was found for the CF specimens with short dwell times(30 and 120 s).The hardness,elastic modulus and creep deformation near the fracture edges of four typical CF specimens with 30,120,600 and 900 s dwell times were measured by nanoindentation.Compared to specimens with post-weld heat treatment(PWHT),lower hardness and creep strength were found for all CF specimens.In addition,significant reduc-tions in hardness,elastic modulus,and creep strength were measured near the fracture edges for the CF specimens with short dwell times compared to the PWHT specimens.Compared to PWHT specimens(0.007),the increased strain rate sensitivities(SRS)of 0.010 to 0.17 were estimated from secondary creep.The increased values of SRS indicate that the room temperature creeps behavior is strongly affected by the decrease in dislocation density after the CF tests.展开更多
基金Supported by National 13th Five-Year Key Technologies R&D Program of China(Grant No.2016YFC0801902)National Natural Science Foundation of China(Grant No.11727803,11672356,52075490)Fundamental Research Funds for the Provincial Universities of Zhejiang(Grant No.RF-A2020010).
文摘In modern fossil and nuclear power plants,the components are subjected to creep,fatigue,and creep-fatigue(CF)due to frequent start-up and shut-down operations at high temperatures.The CF interaction on the in-service P92 steel welded joint was investigated by strain-controlled CF tests with different dwell times of 30,120,300,600 and 900 s at 650℃.Based on the observations of the fracture surface by scanning electron microscope(SEM),the character-istic microstructure of fatigue-induced damage was found for the CF specimens with short dwell times(30 and 120 s).The hardness,elastic modulus and creep deformation near the fracture edges of four typical CF specimens with 30,120,600 and 900 s dwell times were measured by nanoindentation.Compared to specimens with post-weld heat treatment(PWHT),lower hardness and creep strength were found for all CF specimens.In addition,significant reduc-tions in hardness,elastic modulus,and creep strength were measured near the fracture edges for the CF specimens with short dwell times compared to the PWHT specimens.Compared to PWHT specimens(0.007),the increased strain rate sensitivities(SRS)of 0.010 to 0.17 were estimated from secondary creep.The increased values of SRS indicate that the room temperature creeps behavior is strongly affected by the decrease in dislocation density after the CF tests.
