Design and fabrication of compound varifocal lens driven by polydimethylsiloxane film elastic deformation

A compound varifocal lens based on electromagnetic drive technology is designed and fabricated, where the polydimethylsiloxane(PDMS) film acts as a driving component, while the PDMS biconvex lens and the plane-concave lens form a coaxial compound lens system. The plane-concave lens equipped with driving coils is installed directly above the PDMS lens surrounded by the annular magnet. When different currents are applied, the annular magnet moves up and down, driving the PDMS film to undergo elastic deformation, and then resulting in longitudinal movement of the PDMS lens. The position change of the PDMS lens changes the focal length of the compound lens system. To verify the feasibility and practicability of this design, a prototype of our compound lens system is fabricated in experiment. Our proposed compound lens shows that its zoom ability reaches 9.28 mm when the current ranges from -0.20 A to 0.21 A.

Confirmation of a Sub-Saturn-size Transiting Exoplanet Orbiting a G Dwarf:TOI-1194 b and a Very Low Mass Companion Star: TOI-1251 B from TESS

We report the confirmation of a sub-Saturn-size exoplanet,TOI-1194 b,with a mass of about 0.456+0.055-0.051M_(J),and a very low mass companion star with a mass of about 96.5±1.5 MJ,TOI-1251 B.Exoplanet candidates provided by the Transiting Exoplanet Survey Satellite(TESS)are suitable for further follow-up observations by ground-based telescopes with small and medium apertures.The analysis is performed based on data from several telescopes worldwide,including telescopes in the Sino-German multiband photometric campaign,which aimed at confirming TESS Objects of Interest(TOIs)using ground-based small-aperture and medium-aperture telescopes,especially for long-period targets.TOI-1194 b is confirmed based on the consistent periodic transit depths from the multiband photometric data.We measure an orbital period of 2.310644±0.000001 days,the radius is 0.767+0.045-0.041RJ and the amplitude of the RV curve is 69.4_(-7.3)^(+7.9)m s^(-1).TOI-1251 B is confirmed based on the multiband photometric and high-resolution spectroscopic data,whose orbital period is 5.963054+0.000002-0.000001days,radius is 0.947+0.035-0.033 R_(J) and amplitude of the RV curve is 9849_(-40)^(+42)ms^(-1).

Defocus spot detection of astronomical optical system

Defocusing spot size detection is especially essential for aberration analysis and correction of optical systems. In the case of far defocusing, the celestial forms a pupil image on the detector, and the size of the image is linearly changed with the defocusing distance, and can be used to correct the optical system and analyze the image quality. Based on the focal plane attitude detection of Large Sky Area MultiObject Fiber Spectroscopy Telescope(LAMOST), this paper uses a variety of methods to detect the size of the defocusing spot of LAMOST telescope. For the particularity of the spot, the average value spacing algorithm, the peak value spacing algorithm, the ellipse fitting algorithm, and the multi-peak Gaussian fitting algorithm are used to detect the spot size. This paper will introduce these four methods, in which the average value spacing algorithm is proposed by the author of this paper. The advantages and disadvantages of the four methods are compared. The experimental results show that the average value spacing algorithm can achieve better accuracy of spot size detection in the four algorithms.

Data processing and data products from 2017 to 2019 campaign of astronomical site testing at Ali,Daocheng and Muztagh-ata

Based on previous site testing and satellite cloud data,Ali,Daocheng and Muztagh-ata have been selected as candidate sites for the Large Optical/Infrared Telescope(LOT) in China.We present the data collection,processing,management and quality analysis for our site testing based on using similar hardware.We analyze meteorological data,seeing,background light,cloud and precipitable water vapor data from 2017 March 10 to 2019 March 10.We also investigated the relative usefulness of our all-sky camera data in comparison to that from the meteorological TERRA satellite data based on a night-by-night comparison of the correlation and consistency between them.We find a 6% discrepancy arising from a wide range of factors.

Simulation of a ground-layer adaptive optics system for the Kunlun Dark Universe Survey Telescope

Ground Layer Adaptive Optics （GLAO） is a recently developed technique extensively applied to ground-based telescopes, which mainly compensates for the wavefront errors induced by ground-layer turbulence to get an appropriate point spread function in a wide field of view. The compensation results mainly depend on the turbu-lence distribution. The atmospheric turbulence at Dome A in the Antarctic is mainly distributed below 15 meters, which is an ideal site for applications of GLAO. The GLAO system has been simulated for the Kunlun Dark Universe Survey Telescope, which will be set up at Dome A, and uses a rotating mirror to generate several laser guide stars and a wavefront sensor with a wide field of view to sequentially measure the wavefronts from different laser guide stars. The system is simulated on a computer and parameters of the system are given, which provide detailed information about the design of a practical GLAO system.

Fault Diagnosis of the LAMOST Fiber Positioner Based on a Long Short-term Memory(LSTM)Deep Neural Network

The Large Sky Area Multi-Object Fiber Spectroscopic Telescope(LAMOST)has been in normal operation for more than 10 yr,and routine maintenance is performed on the fiber positioner every summer.The positioning accuracy of the fiber positioner directly affects the observation performance of LAMOST,and incorrect fiber positioner positioning accuracy will not only increase the interference probability of adjacent fiber positioners but also reduces the observation efficiency of LAMOST.At present,during the manual maintenance process of the positioner,the fault cause of the positioner is determined and analyzed when the positioning accuracy does not meet the preset requirements.This causes maintenance to take a long time,and the efficiency is low.To quickly locate the fault cause of the positioner,the repeated positioning accuracy and open-loop calibration curve data of each positioner are obtained in this paper through the photographic measurement method.Based on a systematic analysis of the operational characteristics of the faulty positioner,the fault causes are classified.After training a deep learning model based on long short-term memory,the positioner fault causes can be quickly located to effectively improve the efficiency of positioner fault cause analysis.The relevant data can also provide valuable information for annual routine maintenance methods and positioner designs in the future.The method of using a deep learning model to analyze positioner operation failures introduced in this paper is also of general significance for the maintenance and design optimization of fiber positioners using a similar double-turn gear transmission system.

The Study of the Physical Properties and Energy Sources of Five Luminous Type Ibc Supernovae

In this paper,we study five luminous supernovae(LSNe)Ibc(SN 2009ca,ASASSN-15mj,SN 2019omd,SN 2002ued,and SN 2021bmf)whose peak absolute magnitudes M_(peakare)≈-19.5 to-21 mag by fitting their multi-band light curves(LCs)with different energy source models.We find that SN 2009ca might be powered by the^(56)Ni model since the required^(56)Ni mass(0.56 M_(⊙))is comparable to those of energetic SNe Ic,while the rest four SNe cannot be accounted for the^(56)Ni model since their derived^(56)Ni masses are(?)1 M_(⊙)or the ratios of the^(56)Ni mass to the ejecta mass are larger than 0.2.This indicates that some LSNe might be powered by^(56)Ni decay,while most of them need additional energy sources.We then use the magnetar plus^(56)Ni model and the fallback plus^(56)Ni model to fit the LCs of the four LSNe that cannot be explained by the^(56)Ni model,finding that the two models can account for the four SNe,and the derived parameters are comparable to those of LSNe or superluminous SNe in the literature,if they were(mainly)powered by magnetars or fallback.We suggest that the magnetar plus^(56)Ni model is more reasonable than the fallback plus^(56)Ni model,since the validity of the fallback plus^(56)Ni model depends on the value of accretion efficiency(η)and favors a largeηvalue,and the magnetar plus^(56)Ni model yields smallerχ^(2)/dof values.It should be pointed out that,however,the fallback plus^(56)Ni model is still a promising model that can account for the four SNe in our sample as well as other LSNe.

Large-aperture Telescope Tracking Control Based on Time-synchronization Strategy

A time-synchronization strategy for packetized transmission of target position about a large-aperture telescope observation control system has been proposed in this study.Compared with the existing telescope tracking strategy,the target position packing and sending strategy based on the time synchronization method proposed in this paper has the advantages of high stability and reliability.First,the telescope tracking observation control method was elaborated in this paper,including the motion pattern during telescope tracking.Then,the strategy for packetizes transmission of target positions based on time-synchronization is established and lists the detailed steps.Finally,the performance of the tracking strategy is verified using the 2.5 m telescope for the simulated uniform speed star and the blind-tracking fixed star HIP 31216,respectively.The test results show that the accuracy root mean square of the tracking strategy proposed in this paper is less than 0".02 at 30 minutes,and the performance is much better than the design requirement of 0".3.The most important advantage of this tracking strategy is that the telescope can guarantee normal tracking for a certain period of time even if the hardware or software of the host computer is abnormal.

Optical Transient Source AT2021lfa:A Possible“Dirty Fireball”

AT2021lfa,also known as ZTF21aayokph,was detected by the Zwicky Transient Facility on 2021 May 4,a 05:34:48 UTC.Follow-up observations were conducted using a range of ground-based optical telescopes,as wel as Swift/XRT and VLA instruments.AT2021lfa is classified as an“orphan afterglow”candidate due to its rapid flux decline and its reddened color(g-r=0.17±0.14 mag).For an optical transient source without promp gamma-ray detection,one key point is to determine its burst time.Here we measure the burst time through fitting the initial bump feature of AT2021lfa and obtain its burst time as 2021 May 3,at 22:09:50 UTC.Using afterglowpy,we model the multi-band afterglow of AT2021lfa and find that the standard model canno reproduce the late radio observations well.Considering that the microphysical parameters ε_(e),ε_(B)(the energy fraction given to electrons and magnetic field),andξN(the fraction of accelerated electrons)may vary with time we then model the afterglow of AT2021lfa taking into account the temporal evolution of the physical parameters ε_(e),ε^(B),and ξ_(N) and find in this case the multi-wavelength observations can be reproduced well.The initial Lorentz factor of AT2021lfa can be estimated from the peak time of the early afterglow,which yields a value of about 18 suggesting that AT2021lfa should be classified as a“dirty fireball.”From the upper limit for the prompt emission energy of AT2021lfa,we obtain that the radiation efficiency is less than 0.02%,which is much smaller than that of ordinary gamma-ray bursts(GRBs).It is also interesting that the fitted values of jet angle and viewing angle are very large,θ_(c)~0.66 rad,θ_(v)~0.53 rad,which may lead to the low Lorentz factor and radiation efficiency.When compared with GRB afterglow samples,it is evident that the onset bump timescale of AT2021lfa satisfies the empirical relationships observed in GRB samples.Additionally,the luminosity of AT2021lfa falls within the range of observations for GRB samples;however,approximately 1 day after the burst,its luminosity exceeds that of the majority of GRB samples.

End-to-end computational design for an EUV solar corona multispectral imager with stray light suppression

An extreme ultraviolet solar corona multispectral imager can allow direct observation of high temperature coronal plasma,which is related to solar flares,coronal mass ejections and other significant coronal activities.This manuscript proposes a novel end-to-end computational design method for an extreme ultraviolet(EUV)solar corona multispectral imager operating at wavelengths near 100 nm,including a stray light suppression design and computational image recovery.To suppress the strong stray light from the solar disk,an outer opto-mechanical structure is designed to protect the imaging component of the system.Considering the low reflectivity(less than 70%)and strong-scattering(roughness)of existing extreme ultraviolet optical elements,the imaging component comprises only a primary mirror and a curved grating.A Lyot aperture is used to further suppress any residual stray light.Finally,a deep learning computational imaging method is used to correct the individual multi-wavelength images from the original recorded multi-slit data.In results and data,this can achieve a far-field angular resolution below 7",and spectral resolution below 0.05 nm.The field of view is±3 R_(☉)along the multi-slit moving direction,where R☉represents the radius of the solar disk.The ratio of the corona's stray light intensity to the solar center's irradiation intensity is less than 10-6 at the circle of 1.3 R_(☉).

The Jiao Tong University Spectroscopic Telescope Project

The Jiao Tong University Spectroscopic Telescope(JUST)is a 4.4-meter f/6.0 segmented-mirror telescope dedicated to spectroscopic observations.The JUST primary mirror is composed of 18 hexagonal segments,each with a diameter of 1.1 m.JUST provides two Nasmyth platforms for placing science instruments.One Nasmyth focus fits a field of view of 10′and the other has an extended field of view of 1.2°with correction optics.A tertiary mirror is used to switch between the two Nasmyth foci.JUST will be installed at a site at Lenghu in Qinghai Province,China,and will conduct spectroscopic observations with three types of instruments to explore the dark universe,trace the dynamic universe,and search for exoplanets:(1)a multi-fiber(2000 fibers)medium-resolution spectrometer(R=4000-5000)to spectroscopically map galaxies and large-scale structure;(2)an integral field unit(IFU)array of 500 optical fibers and/or a long-slit spectrograph dedicated to fast follow-ups of transient sources for multi-messenger astronomy;(3)a high-resolution spectrometer(R~100000)designed to identify Jupiter analogs and Earth-like planets,with the capability to characterize the atmospheres of hot exoplanets.

Design of the Full-disk Magneto Graph (FMG) onboard the ASO-S

The Full-disk Magneto Graph(FMG),a payload onboard the Advanced Space Solar Observatory(ASO-S),will measure the vector magnetic field in the photosphere.The instrument consists of a frontwindow filter,a telescope,an LCVR polarimeter,an image-stabilization system,a seven-stage tunable Lyot filter,a CMOS camera with 4096×4096 pixels and a pair of calibration/focus wheels.In this paper,we describe the design of the FMG instrument and provide a summary of test observations carried out with the FMG prototype.

Portable adaptive optics for exoplanet imaging

The portable adaptive optics(PAO)device is a low-cost and compact system,designed for 4-meter class telescopes that have no adaptive optics(AO)system,because of the physical space limitation at the Nasmyth or Cassegrain focus and the historically high cost of conventional AO.The initial scientific observations of the PAO are focused on the direct imaging of exoplanets and sub-stellar companions.This paper discusses the concept of PAO and the associated high-contrast imaging performance in our recent observational runs.PAO deliver a Strehl ratio better than 60%in H band under median seeing conditions of 1".Combined with our dedicated image rotation and subtraction(IRS)technique and the optimized IRS(O-IRS)algorithm,the averaged contrast ratio for a 5≤V_(mag)≤9 primary star is 1.3×10^(-5)and3.3×10^(-6)at angular distance of 0.36"with exposure time of 7 minutes and 2 hours,respectively.PAO has successfully revealed the known exoplanet ofκAnd b in our recent observation with the 3.5-meter ARC telescope at Apache Point Observatory.We have performed the associated astrometry and photometry analysis of the recoveredκAnd b planet,which gives a projected separation of 0.98"±0.05",a position angle of 51.1°±0.5°and a mass of 10.15_(-1.255)^(+2.19) MJup.These results demonstrate that PAO can be used for direct imaging of exoplanets with medium-sized telescopes.

Optical system research of multi-object fiber spectroscopic survey telescope

In the first part of this paper,four different Cassegrain optical systems with their correctors are designed and studied for multi-object fiber slit spectroscopic survey.The aperture in 6.5 m and field of view 3°are taken for these optical systems.Assuming observation wavelength range is 0.365-0.95μm,the maximum zenith distance for observing is 60°,the maximum diameter of these lenses is 1.66 m,the altitude of the telescope site is 2500 m,two correctors are composed of 4-piece lenses and the other two are 5-piece lenses.The results obtained are:f-ratio about 3.7,the image quality for all four systems with EE80D≤0.60″,the linear diameter of the focal surface is about 1.2 m and 11 000 fibers can be set on it.Considering the limit of size of fused silica and optical glass,the maximum diameter for lens is about 1.7 m.Such a 6.5 m telescope is about the largest one if using the above correctors.Considering the multiobject spectroscopic survey is greatly important,we also studied some telescope optical systems having their aperture near or larger than 10 m used for the multi-object fiber spectroscopic survey.Such ideas are introduced in the last section of this paper.

Simulation and analysis of co-phasing errors of the segmented primary mirror tiled by hexagonal segments in LOT

In this paper,co-phasing errors of a segmented primary mirror tiled by hexagonal segments are successfully calculated for the 12-meter Large aperture Optical/infrared Telescope(LOT).Co-phasing errors including out-of-plane errors are simulated separately and comprehensively based on several software simulation platforms.PAOLA simulation results show that the Strehl Ratio(SR)of LOT is larger than 0.8 when the RMS value of tip-tilt obeying a normal distribution is less than 0.018 arcsec,and the SR of LOT is larger than 0.8 when the RMS value of piston obeying a normal distribution is less than 40 nm.Besides,simulation results of Zemax show that the SR of LOT is larger than 0.8 when the RMS value of tip-tilt obeying a normal distribution is less than 0.02 arcsec,and the SR of LOT is larger than 0.8 when the RMS value of piston obeying a normal distribution is less than 40 nm.These simulation results successfully lay a solid foundation for LOT(especially the segmented primary mirror with active optics).

Site testing campaign for the Large Optical/infrared Telescope of China:overview

The Large Optical/infrared Telescope(LOT)is a ground-based 12 m diameter optical/infrared telescope which is proposed to be built in the western part of China in the next decade.Based on satellite remote sensing data,along with geographical,logistical and political considerations,three candidate sites were chosen for ground-based astronomical performance monitoring.These sites include:Ali in Tibet,Daocheng in Sichuan and Muztagh-ata in Xinjiang.Up until now,all three sites have continuously collected data for two years.In this paper,we will introduce this site testing campaign,and present its monitoring results obtained during the period between March 2017 and March 2019.

On the LSP3 estimates of surface gravity for LAMOST-Kepler stars with asteroseismic measurements

Asteroseismology allows for deriving precise values of the surface gravity of stars. The accurate asteroseismic determinations now available for the large number of stars in the Kepler fields can be used to check and calibrate surface gravities that are currently being obtained spectroscopically for a huge number of stars targeted by large-scale spectroscopic surveys, such as the on-going Large Sky Area Multi-Object Fiber Spectroscopic Telescope （LAMOST） Galactic survey. The LAMOST spectral surveys have obtained a large number of stellar spectra in the Kepler fields. Stellar atmospheric parameters of those stars have been determined with the LAMOST Stellar Parameter Pipeline at Peking University （LSP3）, by template matching with the MILES empirical spectral library. In the current work, we compare surface gravities yielded by LSP3 with those of two asteroseismic samples-- the largest Kepler asteroseismic sample and the most accurate Kepler asteroseismic sample. We find that LSP3 surface gravities are in good agreement with asteroseismic values of Hekker et al., with a dispersion of -0.2 dex. Except for a few cases, asteroseismic surface gravities ofHuber et al. and LSP3 spectroscopic values agree for a wide range of surface gravities. However, some patterns in the differences can be identified upon close inspection. Potential ways to further improve the LSP3 spectroscopic estimation of stellar atmospheric parameters in the near future are briefly discussed. The effects of effective temperature and metallicity on asteroseismic determinations of surface gravities for giant stars are also discussed.

A sample of galaxy pairs identified from the LAMOST spectral survey and the Sloan Digital Sky Survey

A small fraction （〈 10%） of the SDSS main galaxy （MG） sample has not been targeted with spectroscopy due to the effect of fiber collisions. These galaxies have been compiled into the input catalog of the LAMOST ExtraGAlactic Surveys and named the complementary galaxy sample. In this paper, we introduce this project and status of the spectroscopies associated with the complementary galaxies in the first two years of the LAMOST spectral survey （till Sep. of 2014）. Moreover, we present a sample of 1102 galaxy pairs identified from the LAMOST complementary galaxies and SDSS MGs, which are defined as two members that have a projected distance smaller than 100 h^-01kpc and a recessional velocity difference smaller than 500 km s-1. Compared with galaxy pairs that are only selected from SDSS, the LAMOST- SDSS pairs have the advantages of not being biased toward large separations and therefore act as a useful supplement in statistical studies of galaxy interaction and galaxy merging.

Multi-parameter identification of gratings measurement by Experimental Ray Tracing

A simple method for measuring grating groove density as well as its position and orientation is proposed based on the idea of ERT(Experimental Ray Tracing).Conventional methods only measure grating groove density with accuracy limited by its rotary stage and goniometer.The method proposed in the paper utilizes linear guides which could be calibrated to much higher accuracy.It is applicable to gratings of arbitrary surface profile or mosaic of a group of various gratings.Various measurement error sources are simulated by the Monte Carlo method and the results show high accuracy capability of grating parameters identification.A verification testing is performed.The accuracy dependency on main configuration parameters is evaluated.A method to expand measurement range by double wavelength is also discussed.

Effect of alloying elements W,Ti,Sn on microstructure and mechanical properties of gray iron 220

Experiments were carried out to observe the variation in microstructure and mechanical properties of gray cast iron by adding pearlite promoting alloying elements such as Ti,Sn and W.Results show that adding Sn,Ti,and W with different concentrations improve the microstructure,Brinell hardness and tensile strength of gray cast iron.With the increase of alloying element concentration,the average graphite length and graphite content increase linearly.At the same time,average cell size and the maximum graphite length also decrease linearly.Brinell hardness and tensile strength of gray cast iron also increase with an increase in alloying elements contents,and attain the maximum when Ti=0.561%,Sn=0.561%and W=0.945%.However,at higher concentrations of Ti=0.810%,Sn=0.631%and W=1.351%,the tensile strength decreases from 333 MPa to 297 MPa and the Brinell hardness decreases from 248 HB to 225 HB.The decrease in tensile strength and Brinell hardness at the higher concentration level is attributed to the formation of coarse and thick graphite flakes.