Antiplane response of isosceles triangular hill to incident SH waves

In this paper, antiplane response of an isosceles triangular hill to incident SH waves is studied based on the method of complex function and by using moving coordinate system. The standing wave function, which can satisfy the governing equation and boundary condition, is provided. Furthermore, numerical examples are presented; the influences of wave number and angle of the incident waves and the angle of the hill’s peak on ground motion are discussed.

Bi-normalized response spectral characteristics of the 1999 Chi-Chi earthquake

To develop uniform and seismic environment-dependent design spectrum,common acceleration response spectral characteristics need to be identified.In this paper,a bi-normalized response spectrum (BNRS) is proposed,which is defined as a spectrum of peak response acceleration normalized with respect to peak acceleration of the excitation plotted vs.the natural period of the system normalized with respect to the spectrum predominant period,Tp.Based on a statistical analysis of records from the 1999 Chi-Chi earthquake,the conventionally normalized response spectrum(NRS) and the BNRS are examined to account for the effects of soil conditions,epicentral distance,hanging wall and damping.It is found that compared to the NRS the BNRS is much less dependent on these factors.Finally,some simple relationships between the BNRS for a specified damping ratio and that for a damping ratio of 5%,and between the spectra predominant period and epicentral distance for different soil types are provided.

Seismic structural control using semi-active tuned mass dampers

This paper focuses on how to determine the instantaneous damping of the semi-active tuned mass damper (SATMD) with continuously variable damping.An off-and-towards-equilibrium (OTE) algorithm is employed to examine the control performance of the structure/SATMD system by considering the damping as an assumptive control action.The damping modification of the SATMD is carried out according to the proposed OTE algorithm,which is formulated based on analysis of the structural movement under external excitations,and the measured responses of the structure at every time instant. As examples two numerical simulations of a five-storey and a ten-storey shear structures with a SATMD on the roof are conducted.The effectiveness on vibration reduction of MDOF systems subjected to seismic excitations is discussed.Analysis results show that the behavior of the structure with a SATMD is significantly improved and the feasibility of applying the OTE algorithm to the structural control design of SATMD is also verified.

Experimental study on seismic behavior of semi-rigid connection between steel beam and concrete wall

Beam-column or beam-wall connections are an important problem in high-rise buildings. In this study, based on the analysis of an example structure, an analytical model for design of the semi-rigid connections between steel beams and RC walls in high-rise hybrid buildings is proposed. Also, the mechanical characteristics of these connections subjected to low-reversed cyclic loading are investigated through comparison of experimental results from three semi-rigid connections and two rigid connections. Moreover, some latent problems for design of these connections as well as the corresponding solutions are discussed. The results from the experiments and analyses indicate that semi-rigid connections exhibit satisfactory capacity and seismic performance, and the proposed design can be used in practice.

Optical and electronic performances of CVD diamond film andits applications in radiation detectors

The outstanding properties of CVD diamond film such as electronic, optical, thermal and mechanical and the high radiation hardness have made it an ideal candidate material for radiation detectors in severe environments. Fabrication of ＇detector grade＇ CVD diamond films and development of CVD diamond detectors have been leading edge subjects. Micro-strip gas chamber （MSGC） fabricated on CVD diamond substrate would overcome the charge-up effect and the substrate instability, which has been a hotspot in the research of gas detectors.

Excess Liquidity Control Requires a Multi-Pronged Approach

As China opens wider to the outside world, excess liquidity has become an outstanding issue in economic operations. This paper holds that China's liquidity is relatively excessive at the present time, and such excess liquidity is a reflection of domestic and foreign economic contradictions on the monetary level. Excess liquidity will pose a potential hazard to macroeconomic operation, and a multi-pronged approach should be taken to curb and control its sources at home and abroad.

An Introduction to 2-CCD Digital Particle Image Velocimetry System and Its Application in Ocean Engineering

The basic principle of particle image velocinmetry (PIV) is described. When a PIV image is analyzed by the method of auto-correlation, there is a direction ambiguity of 180 degrees iii velocity measurement. The problem can be solved by using 'Image Shifting Technique', but this makes devices much complicated and difficult to control. A new arrangement of 2-CCD (Charge Coupled Device) fully digitized PIV system, which can also solve the problem successfully, is introduced in the paper. As an example of application of the system, an experimental result of flow field around a horizontal cylinder in wave is presented.

IDENTIFICATION OF WOOD AND BARK EXTRACTIVES AND THEIR TOXICOLOGICAL EFFECTS ON THE TMP EFFLUENTS

Wood extractives in model TMP effluents and bio-treated TMP mill effluent were extracted, isolated with liquid-liquid extraction, and analyzed with GC/MS following sylilation. Acute and chronic toxicity of the effluent samples were tested with Ceriodaphnia dubia. Wood and bark extractives are responsible for the toxicity of the TMP effluent to aquatic life. Resin and fatty acids have a dominating contribution to acute toxicity. Removal of them from the effluent cannot deplete all toxicants, some neutral extractives such as phytosterols, are still chronically toxic to Ceriodaphnia dubia. Wood bark has a dramatic impact on acute toxicity of the TMP effluent. Only 5% of spruce bark addition can increase acute toxicity by 38.4%. However, it has a reverse trend for chronic toxicity, which indicates that some neutral wood extractives may play important role in chronic toxicity of the TMP effluent as well. Successful control of the debarking process and debark effluents is essential for achieving high-quality effluent treatment.

消除有扰射频:基于LabVIEW和NI USRP进行射频/通信物理层研究

LabVIEW系统设计软件在并行编程上确实很出色,是研究过程中开发信号处理和通信算法的好帮手。通过与使用C++、Java和其他语言进行编程的比较,LabVIEW更直接、更直观地反映这种并行机制。

The Essence of Non-Traditional Security Issues and Their Solutions

Non-traditional security issues have arisen since the 1960s,especially after the end of the Cold War,and are becoming a major issue in world security and politics.This reflects tremendous changes in the world situation.With diverse causes and plural referent objects,non-traditional security issues cover nearly all the problems in the world today and make development difficult to sustain.This raises the question of whether human society and the earth can survive.Power politics one-sidedly stresses the role of power,endangering the harmonious development of nations and the whole of human society.It is not at all conducive to the solution of non-traditional security issues.The solution of non-traditional security issues demands cooperation from all actors in the international community.Multiple means are needed to solve these issues.Equal dialogue between all the actors,which can easily be attained,will play an effective role,as long as all actors respect each other's differences.

The effect of single-tree selction system on soil properties in an oriental beech stand of Hyrcanian forest, north of Iran

A case study was conducted in beech forests of northern Iran to determine the effect of the created gaps on some soil properties in beech stand. Changes of soil properties in small （60-150 mE）, medium （151-241 mE）, large （242-332 m^2） and very large （333-550 m^2） gaps, as well as under closed stands were studied eight years after-the gap creation. Soil samples were taken from three depths, 0-10, 10-20 and 20-30 cm. The gaps were different from their around undisturbed stands in terms of the following soil parameters： Mg^＋2 concentration of 0-10 cm at medium gap size, bulk density of 10-20 cm at very large gap size as well as K^＋ and Ca^＋2 concentrations at 20-30 cm at small and large gap sizes, respectively. Furthermore, the size of the gaps had no effect on soil characteristics through the whole profile. Water saturation percent （Sp %） at 0-10cm as well as P and Mg^＋2 at 20--30 cm was different amongst undisturbed stands around different gap sizes. The center and the edges of the gap were different only in terms of organic carbon at the depth of 10-20 cm. Significant differences were observed between gaps and closed canopy regarding P and Ca^＋2 at depth 0--10 cm and 10-20 cm, respectively. It can be concluded that applied silvicultural system for harvesting trees which created these gaps might be suitable for conservation and forest management in the region.

High accuracy compact finite difference methods and their applications

Numerical simulation of complex flow fields with multi-scale structures is one of the most important and challenging branches of computational fluid dynamics. From linear analysis and numerical experiments it has been discovered that the higher-order accurate method can give reliable and efficient computational results, as well as better resolution of the complex flow fields with multi-scale structures. Compact finite difference schemes, which feature higher-order accuracy and spectral-like resolution with smaller stencils and easier application of boundary conditions, has attracted more and more interest and attention.

Improved Geological Mapping Using Landsat-5 TM Data in Weixi Area, Yunnan Province, China

Different image processing algorithms have been evaluated in the context of geological mapping using Landsat TM data. False color composites, the principal component imagery, and IHS decorrelation stretching method for Landsat-5 TM data have been found useful for delineating the regional geological features, mainly to provide the maximum geological information of the studied area . The study testifies that using which image processing yields best results for geological mapping in arid and semiarid regions by preserving morphological and spectral information. Generally, the studied area can be divided into three main geological units: Basaltic intrusive rocks, Metamorphic with varying intensities and Sedimentary rocks.

Research of testing method based on UML statecharts

Unified modeling language （UML） is a powerful graphical modeling language with intuitional meaning. It provides various diagrams to depict system characteristics and complex environment from different viewpoints and different application layers. UML-based software development and modeling environments have been widely accepted in industry, including areas in which safety is an important issue such as spaceflight, defense, automobile, etc. To ensure and improve software quality becomes a main concern in the field. As one of the key techniques for software quality, software testing can effectively detect system faults. UML based software testing based is an important research direction in software engineering. The key to software testing is the generation of test cases. This dissertation studies an approach to generating test cases from UML statecharts.

Application of experimental design techniques to structural simulation meta-model building using neural network

Neural networks are being used to construct meta-models in numerical simulation of structures.In addition to network structures and training algorithms,training samples also greatly affect the accuracy of neural network models.In this paper,some existing main sampling techniques are evaluated,including techniques based on experimental design theory, random selection,and rotating sampling.First,advantages and disadvantages of each technique are reviewed.Then,seven techniques are used to generate samples for training radial neural networks models for two benchmarks:an antenna model and an aircraft model.Results show that the uniform design,in which the number of samples and mean square error network models are considered,is the best sampling technique for neural network based meta-model building.

Multidirectional Gaussian Mixture Models for Nonlinear Uncertainty Propagation

Monte Carlo simulations are an accurate but computationally expensive procedure for approximating the resultant non-Gaussian probability density function(PDF)after propagation of an initial Gaussian PDF through a nonlinear function.Univariate splitting libraries for Gaussian Mixture Models(GMMs)exist with up to five elements in the literature.The number of splits are extended in the present work by generating three homoscedastic univariate splitting libraries with up to 39 elements.Mulitvariate GMMs are typically handled with splits along a single direction.Instead,we generate a regular multidirectional grid over the initial multivariate Gaussian distribution by recursively applying the splitting library along multiple directions.The splitting direction is arbitrary and no longer limited to directions parallel to the columns of the square-root of the covariance matrix.A second order Stirling’s interpolation of the nonlinear function evaluated at the mean of the initial Gaussian distribution is used to quantify nonlinearity along candidate splitting directions.The directions with the highest nonlinearity benefit most from splitting.The Multidirectional GMM(MGMM)has applications for uncertainty quantification with computationally intensive nonlinear functions.The variable number of splits in each direction allows for a spectrum of models in the accuracy versus compute time design space,filling the gap between expensive Monte Carlos and fast linearized models.The multidirectional method is demonstrated with four test cases,including an orbit uncertainty propagation case,to illustrate the benefit of splitting along multiple directions and of ranking the splitting directions.