Surface Decontamination of Chemical Agent Surrogates Using an Atmospheric Pressure Air Flow Plasma Jet

An atmospheric pressure dielectric barrier discharge （DBD） plasma jet generator using air flow as the feedstock gas was applied to decontaminate the chemical agent surrogates on the surface of aluminum, stainless steel or iron plate painted with alkyd or PVC. The experi- mental results of material decontamination show that the residual chemical agent on the material is lower than the permissible value of the National Military Standard of China. In order to test the corrosion effect of the plasma jet on different material surfaces in the decontamination pro-cess, corrosion tests for the materials of polymethyl methacrylate, neoprene, polyvinyl chloride （PVC）, polyethylene （PE）, phenolic resin, iron plate painted with alkyd, stainless steel, aluminum, etc. were carried out, and relevant parameters were examined, including etiolation index, chroma- tism, loss of gloss, corrosion form, etc. The results show that the plasma jet is slightly corrosive for part of the materials, but their performances are not affected. A portable calculator, computer display, mainboard, circuit board of radiogram, and a hygrometer could work normally after being treated by the plasma jet.

Revealing the Multifunctional Electrocatalysis of Indium-Modulated Phthalocyanine for High-Performance Lithium-Sulfur Batteries

The sluggish kinetics of complicated multiphase conversions and the severe shuttling effect of lithium polysulfides(LiPSs)significantly hinder the applications of Li-S battery,which is one of the most promising candidates for the next-generation energy storage system.Herein,a bifunctional electrocatalyst,indium phthalocyanine self-assembled with carbon nanotubes(InPc@CNT)composite material,is proposed to promote the conversion kinetics of both reduction and oxidation processes,demonstrating a bidirectional catalytic effect on both nucleation and dissolution of Li_(2)S species.The theoretical calculation shows that the unique electronic configuration of InPc@CNT is conducive to trapping soluble polysulfides in the reduction process,as well as the modulation of electron transfer dynamics also endows the dissolution of Li_(2)S in the oxidation reaction,which will accelerate the effectiveness of catalytic conversion and facilitate sulfur utilization.Moreover,the InPc@CNT modified separator displays lower overpotential for polysulfide transformation,alleviating polarization of electrode during cycling.The integrated spectroscopy analysis,HRTEM,and electrochemical study reveal that the InPc@CNT acts as an efficient multifunctional catalytic center to satisfy the requirements of accelerating charging and discharging processes.Therefore,the Li-S battery with InPc@CNT-modified separator obtains a discharge-specific capacity of 1415 mAh g^(-1)at a high rate of 0.5 C.Additionally,the 2 Ah Li-S pouch cells deliver 315 Wh kg^(-1)and achieved 80%capacity retention after 50 cycles at 0.1 C with a high sulfur loading of 10 mg cm^(-2).Our study provides a practical method to introduce bifunctional electrocatalysts for boosting the electrochemical properties of Li-S batteries.

Plastic deformation behavior of a Cu-10Ta alloy under strong impact loading

In this work,a Cu-10Ta alloy with a copper to tantalum mass ratio of 9:1 is prepared using powder metallurgy technology.Physical properties of the alloy,including density,microstructure,melting point,and constant-volume specific heat,are tested.Via the split Hopkinson pressure bar(SHPB)and flyerplate impact experiments,the relationship between equivalent stress and equivalent plastic strain of the material is studied at temperatures of 298-823 K and under strain rates of 1×10^(-3)-5.2×10^(3)s^(-1),and the Hugoniot relationship at impact pressures of 1.46-17.25 GPa and impact velocities of 108-942 m/s is obtained.Evolution of the Cu-10Ta microstructure that occurs during high-strain-rate impact is analyzed.Results indicate that the Cu-10Ta alloy possesses good thermal stability,and at ambient temperatures of up to 50%its melting point,stress softening of less than 15%of the initial strength is observed.A modified J-C constitutive model is employed to accurately predict the variation of yield strength with strain rate.Under strong impact,the copper phase is identified as the primary source of plastic deformation in the Cu-10Ta alloy,while significant deformation of the high-strength tantalum particles is less pronounced.Furthermore,the longitudinal wave speed D is found to correlate linearly with the particle velocity u upon strong impact.Analysis reveals that the sound speed and spallation strength of the alloy increase with increasing impact pressure.

Viscoelastic Analysis of a Surface Acoustic Wave Gas Sensor Coated by a New Deposition Technique

An analysis of the response of surface acoustic wave sensors coated with polymer film based on new coating deposition （self-assemble and molecularly imprinted technology） is described and the response formulas are hence deduced. Using the real part of shear modulus, the polymer can be classified into three types： glassy film, glassy-rubbery film and rubbery film, Experimental results show that the attenuation response is in better consistence with the simulation than in Martin＇s theory, but the velocity response does not accord with the calculation exactly. Maybe it is influenced by the experimental methods and environment. In addition, simulations of gas sorption for polymer films are performed. As for glassy film, the SAW sensor response increases with increasing fihn thickness, and the relationship between the sensor response and the concentration of gas is pretty linear, while as for glassy-rubbery flint and rubbery film, the relationship between the sensor sensitivity anti concentration of gas is very complicated. The ultimately calculated results indicate that the relationship between the sensor response and frequency is not always linear due to the viscoelastic prooerties of the polymer.

P4S10 modified lithium anode for enhanced performance of lithium–sulfur batteries

To address the corrosion and dendrite issues of lithium metal anodes, a protective layer was ex-situ constructed by P4S10 modification. It was determined by X-ray photoelectron spectroscopy and Raman spectra that the main constituents of the protective layer were P4S10, Li3PS4 and other LixPySztype derivatives. The protective layer was proved to be effective to stabilize the interphase of lithium metal. With the modified Li anodes, symmetric cells could deliver stable Li plating/stripping for 16000 h;Li–S batteries exhibited a specific capacity of 520 m A h g-1 after 200 cycles at 1000 m A g-1 with average Coulombic efficiency of 97.9%. Therefore, introducing LixPySzbased layer to protect Li anode provides a new strategy for the improvement of Li metal batteries.

Recent progress of fiber-shaped batteries towards wearable application

Rapid development of portable or wearable devices, which is inspired by requirements of instant messaging,health monitoring and handling official business, urgently demands more tiny, flexible and light power sources. Fibershaped batteries explored in recent years become a prospective candidate to satisfy these demands. With 1D architecture,the fiber-shaped batteries could be adapted to various deformations and integrated into soft textile and other devices.Numerous researches have been reported and achieved huge promotion. To give an overview of fiber-shaped batteries,we summarized the development of fiber-shaped batteries in this review, and discussed the structure and materials in fiber-shaped batteries. The flexibility of batteries with the potential application of the batteries was also exhibited and showed the future perspective. Finally, challenges in this field were discussed, hoping to reveal research direction towards further development of fiber-shaped batteries.

Study on dynamic response of multi-degree-of-freedom explosion vessel system under impact load

In order to study the dynamic response and calculate the axial dynamic coefficient of the monolayer cylindrical explosion vessel,the wall of vessel is simplified as a multi-degree-of-freedom(MDoF) undamped elastic foundation beam.Decoupling the coupled motion equation and using Duhamel's integrals,the solutions in generalized coordinates of the equations under exponentially decaying loads,square wave loads and triangular wave loads are calculated.These solutions are consistent in form with the solutions of single-degree-of-freedom(SDoF) undamped forced vibration simplified model.Based on the model,equivalent MDoF design method(also called MDoF dynamic coefficient method) of cylindrical explosion vessel is proposed.The traditional method can only predict the dynamic coefficient of torus portion around the explosion center,but this method can predict that of the vessel wall at any axial n dividing point position.It is verified that the prediction accuracy of this model is greatly improved compared with the SDoF model by comparing the results of this model with SDoF model and numerical simulation in different working conditions.However,the prediction accuracy decreases as the scaled distance decreases and approaches the end of the vessel,which is related to the accuracy of the empirical formula of the implosion load,the simplification of the explosion load direction,the boundary conditions,and the loading time difference.

A CLASS OF COMPACT UPWIND TVD DIFFERENCE SCHEMES

A new method was proposed for constructing total variation diminishing （TVD） upwind schemes in conservation forms. Two limiters were used to prevent nonphysical oscillations across discontinuity. Both limiters can ensure the nonlinear compact schemes TVD property. Two compact TVD （CTVD） schemes were tested, one is thirdorder accuracy, and the other is fifth-order. The performance of the numerical algorithms was assessed by one-dimensional complex waves and Riemann problems, as well as a twodimensional shock-vortex interaction and a shock-boundary flow interaction. Numerical results show their high-order accuracy and high resolution, and low oscillations across discontinuities.

Pole-placement self-tuning control of nonlinear Hammerstein system and its application to pH process control

By taking advantage of the separation characteristics of nonlinear gain and dynamic sector inside a Hammerstein model, a novel pole placement self tuning control scheme for nonlinear Hammerstein system was put forward based on the linear system pole placement self tuning control algorithm. And the nonlinear Hammerstein system pole placement self tuning control(NL-PP-STC) algorithm was presented in detail. The identi fication ability of its parameter estimation algorithm of NL-PP-STC was analyzed, which was always identi fiable in closed loop. Two particular problems including the selection of poles and the on-line estimation of model parameters, which may be met in applications of NL-PP-STC to real process control, were discussed. The control simulation of a strong nonlinear p H neutralization process was carried out and good control performance was achieved.

Importance of being Nernst: Synaptic activity and functional relevance in stem cell-derived neurons

Functional synaptogenesis and network emergence are signature endpoints of neurogenesis. These behaviors provide higher-order confirmation that biochemical and cellular processes necessary for neurotransmitter release, post-synaptic detection and network propagationof neuronal activity have been properly expressed and coordinated among cells. The development of synaptic neurotransmission can therefore be considered a defining property of neurons. Although dissociated primary neuron cultures readily form functioning synapses and network behaviors in vitro, continuously cultured neurogenic cell lines have historically failed to meet these criteria. Therefore, in vitro-derived neuron models that develop synaptic transmission are critically needed for a wide array of studies, including molecular neuroscience, developmental neurogenesis, disease research and neurotoxicology. Over the last decade, neurons derived from various stem cell lines have shown varying ability to develop into functionally mature neurons. In this review, we will discuss the neurogenic potential of various stem cells populations, addressing strengths and weaknesses of each, with particular attention to the emergence of functional behaviors. We will propose methods to functionally characterize new stem cell-derived neuron(SCN) platforms to improve their reliability as physiological relevant models. Finally, we will review how synaptically active SCNs can be applied to accelerate research in a variety of areas. Ultimately, emphasizing the critical importance of synaptic activity and network responses as a marker of neuronal maturation is anticipated to result in in vitro findings that better translate to efficacious clinical treatments.

Extended XG Equation for the Prediction of Adsorption Equilibrium of Vapor Mixture on Activated Carbon

The XG equation, which is developed by us previously for describing the adsorption equilibrium of pure vapor on activated carbon, is extended to multi-component system. Verified by experimental data, the extended XG equation was found to be more successful in predicting the adsorption equilibrium of vapor mixture on activated carbon than the extended Langmuir equation, the extended BET equation and the ideal adsorbed solution theory (IAST).

In situ self-nucleophilic synthesis of nano-Li_(4)Ti_(5)O_(12)/reduced graphite oxide composite with mesopore-oriented porous structure for high-rate lithium ion batteries

It is the core to improve the electron/ion transfer features of Li_(4)Ti_(5)O_(12) for achieving high-rate anode in lithium ion batteries.By directly using graphite oxide powder,nano-Li_(4)Ti_(5)O_(12)/reduced graphite oxide composite with mesopore-oriented porosity is prepared through one-pot facile ball-milling method in this work.Synthesis mechanism underlying the self-nucleophilic effect of oxygen-containing functional groups in graphite oxide is substantiated.Reactants can intercalate into graphite oxide bulk and in-situ generate nanoparticles.Subsequently,graphite oxide with nanoparticles generated inside can obtain a mesopore-oriented porous structure under ball-milling.Furthermore,the synergistic effects of Li_(4)Ti_(5)O_(12) nanoparticles and mesopore-oriented porosity strengthen composites with rapid Li^(+)diffusion and electron conductive frameworks.The obtained optimal LTO/GO-1.75 composite displays excellent high-rate capability(136 mA·h/g at 7000 mA/g)and good cycling stability(a capacity retention of 72%after 1000 cycles at 7000 mA/g).Additionally,the reactants concentration in this demonstrated strategy is as high as 30 wt%−40 wt%,which is over 6 times that of traditional methods with GO suspensions.It means that the strategy can significantly increase the yield,showing big potential for large-scale production.

Comparative Analysis of Experiment Treating Benzene and CEES by Pulse Corona Plasma

Based on an experiment treating benzene and 2-chloroethyl ethyl sulfide （CEES） by pulse corona induced-plasma, the simiarities and differences found in the experimental data and analytical results are analyzed in a comparative manner in this paper. The theory applied is also discussed.

A new method for inversion of hydroxyl group of carbocyclic nucleosides

The hydroxyl group of carbocyclic nucleosides was inversed when the compounds were treated with Me3SiCl, KCN and a catalytic mount of NaI in DMF/CH3CN.

Perturbation solution to unsteady flow in a porous channel with expanding or contracting walls in the presence of a transverse magnetic field

An incompressible flow in a porous channel with expanding or contacting walls in the presence of a transverse magnetic field is considered. Using similarity transformations, the governing equations are reduced to the nonlinear ordinary differential equations. The exact similar solutions for the different cases of the expansion ratio and the Hartmann number are obtained with a singular perturbation method, and the associated behavior is discussed in detail.

3D Numerical Simulation of Aerodynamic Characteristics of a Gas Filter

The filter paper and activated carbon which filled inside the gas filter have porous media characteristics. In order to study the flow field structure in the filter layer and the activated carbon layer, Computational Fluid Dynamics method is used to simulate the aerodynamic characteristics of a simplified gas filter. The inertial and viscosity parameters of porous media are solved by Forchheimer equation. The three-dimensional N-S equation and the modified low Reynolds number k-ε turbulence model are adopted to analyze the influence of the explosion-proof plate on the gas filter’s aerodynamic characteristics. The results showed that the air age in the upstream of the activated carbon plates was small, which easily caused the rapid penetration of the Poisonous gas. And in the downstream and around of the activated carbon plates, the air age is larger, formed dead zone, the utilization rate of activated carbon is lower. The explosion-proof plate increases the pressure drop of the gas filter, the air age distribution in the filter layer is more uniform and the utilization rate of filter paper is improved. However, the explosion-proof plate has little influence on the flow field structure of the activated carbon layer.

Pros and Cons in Therapeutic Evaluation of Paraoxonase 1 in Nerve Agent Toxicity

PON 1 （Paraoxonase 1） has been proposed as an efficient catalytic bioscavenger to combat against OP （organophosphate） and CWNA （chemical warfare nerve agent） toxicity. Unlike stoichiometric bioscavengers such as butyrylcholinesterase, catalytic bioscavengers are cost effective with the advantage of eliminating all the OPs/CWNAs at low doses. Analysis of catalytic bioscavenger efficacy of PONI showed promising results by various group of researchers. Still, there are large numbers of grey areas which are not addressed so far. One of the major areas of interest is the pharmacokinetic analysis of infused PON 1 in multiple animal models. It is shown that previous studies in mice significantly increased half-life of PONI, while recent studies in guinea pigs from our group showed reduced half-life of PON1. Similar results were reported by other research groups in guinea pigs and non-human primates. The short half-life of exogenously administered PON1 in multiple animal models may be due to poor association of PON1 with its endogenous carrier, high density lipoprotein or lower doses of PON 1 or a reflection of species difference. These observations warrant the significance of thorough pharmacokinetic analysis of infused PON 1 and the development of alternative approaches for successful utility of PON 1 as an efficient medical countermeasure against OP/CWNA toxicity.

Hard-carbon hybrid Li-ion/metal anode enabled by preferred mesoporous uniform lithium growth mechanism

To achieve high energy density in lithium batteries,the construction of lithium-ion/metal hybrid anodes is a promising strategy.In particular,because of the anisotropy of graphite,hybrid anode formed by graphite/Li metal has low transport kinetics and is easy to causes the growth of lithium dendrites and accumulation of dead Li,which seriously affects the cycle life of batteries and even causes safety problems.Here,by comparing graphite with two types of hard carbon,it was found that hybrid anode formed by hard carbon and lithium metal,possessing more disordered mesoporous structure and lithophilic groups,presents better performance.Results indicate that the mesoporous structure provides abundant active site and storage space for dead lithium.With the synergistic effect of this structure and lithophilic functional groups(–COOH),the reversibility of hard carbon/lithium metal hybrid anode is maintained,promoting uniform deposition of lithium metal and alleviating formation of lithium dendrites.The hybrid anode maintains a 99.5%Coulombic efficiency(CE)after 260 cycles at a specific capacity of 500 m Ah/g.This work provides new insights into the hybrid anodes formed by carbon-based materials and lithium metal with high specific energy and fast charging ability.

基于AR模型与神经网络的核爆与闪电电磁脉冲信号识别

对平稳随机信号功率谱估计的AR模型,分别利用自相关函数法和Burg算法求该模型系数,作为核爆炸和闪电电磁脉冲信号的特征值;采用BP神经网络作为分类器以及不同的隐含层数和隐含层节点数,对核爆和闪电电磁脉冲实测数据进行识别研究。结果表明:AR参数模型法对两类信号特征值提取是非常有效的,采用Burg算法来求AR模型参数,其特征值提取效果优于自相关函数法。

A gelatin-based artificial SEI for lithium deposition regulation and polysulfide shuttle suppression in lithium-sulfur batteries

Lithium-sulfur(Li-S) battery is one of the best candidates for the next-generation energy storage system due to its high theoretical capacity(1675 mA h-1),low cost and environment friendliness.However,lithium(Li) dendrites formation and polysulfide shuttle effect are two major challenges that limit the commercialization of Li-S batteries.Here we design a facile bifunctional interlayer of gelatin-based fibers(GFs),aiming to protect the Li anode surface from the dendrites growth and also hinder the polysulfide shuttle effect.We reveal that the 3D structural network of GFs layer with abundant polar sites helps to homogenize Li-ion flux,leading to uniform Li-ion deposition.Meanwhile,the polar moieties also immobilize the lithium polysulfides and protect the Li metal from the side-reaction.As a result,the anodeprotected batteries have shown significantly enhanced performance.A high coulombic efficiency of 96% after 160 cycles has been achieved in the Li-Cu half cells.The Li-Li symmetric cells exhibit a prolonged lifespan for 800 h with voltage hysteresis(10 mV).With the as-prepared GFs layer,the Li-S battery shows approximately 14% higher capacity retention than the pristine battery at 0.5 C after 100 cycles.Our work presents that this gelatin-based bi-functional interlayer provides a viable strategy for the manufacturing of advanced Li-S batteries.