THE NON-AXISYMMETRICAL DYNAMIC RESPONSE OF TRANSVERSELY ISOTROPIC SATURATED POROELASTIC MEDIA

The Blot's wave equations of transversely isotropic saturated poroelastic media excited hy non-axisymmetrical harmonic source were solved by means of Fourier expansion and Hankel transform. Then the components of total stress in porous media are expressed with the solutions of Biot's wave equations. The method of research on non-axisymmetrical dynamic response of saturated porous media is discussed, and a numerical result is presented.

GEOCHEMICAL CHARACTERISTICS OF GRANITES AND ITS STRUCTURAL GENETIC ENVIRONMENT IN THE NANDAN-HECHI METALLOGENETIC BELT, NORTHWEST GUANGXI

The Nandan-Hechi metallogenetic belt is the most important tin-polymetallic producing district in China, and is the location of the Dachang super-large tin deposit. Based on the detailed field investigation and isotopic data, the stages of magmatic activity in the Nandan-Hechi metallogenetic belt have been lined out in this paper. Through the study about the geochemical characteristics of different granites, and by using ω(Al2O3)-ω(SiO2), ω(TFeO)/[ω(TFeO)+ω(MgO)]-ω(SiO2), AFM, ACF and Rb-Yb+Ta, Rb-Y+Nb, Ta-Yb, Nb-Y discrimination diagrams in combination with regional geological setting analysis, the authors carried out analyses about the structural environment for the formation of the granites, and discussed the structural environment and dynamic setting for the large scale mineralization in this area. Our study indicates that the majority of the granites in Nandan-Hechi metallogenetic belt belong to the POG type, while the later stage alaskite belongs to the RRG+CEUG type. The granites were formed at the stage of structural transformation from postorogenic phase to intraplate setting. But the major structural environment is characterized by steady regional extension. The formation age for the granites coincides with the time for this transformation, and this translation environment is favored for large-scale metallogenesis.

STUDIES ON BLOOD GLUTATHIONE PEROXIDASE PROTEIN LEVEL OF CHILDREN IN KESHAN DISEASE AND KASHIN-BECK DISEASE AREAS

Objective To oberve the change in blood glutathione peroxidase (GSH-Px) protein levels of residents in the low-selenium (Se) area by contrasting the blood GSH-Px protein level of the children in the Keshan disease area with those in the Kashin-Beck disease and non-endemic areas. Methods GSH-Px protein levels were measured by enzyme-linked immunosorbent assays (ELISA). The Se content and GSH-Px activity were assayed by the 2,3-diaminonaphthalene spectrofluorimetric method and glutathione reductase-coupled method respectively. Results ①The blood Se content and GSH-Px protein level of children in Keshan disease area (Moding) were significantly lower than those in Xi’an non-endemic area, however, there was no significant difference when compared with the low-Se non-endemic area; ②The blood Se content, GSH-Px activity and GSH-Px protein level of children in the Kashin-Beck disease area (Yulin) were significantly lower than those of children in two non-endemic areas and in the Keshan disease area; ③The blood Se content and GSH-Px activity were positively correlated to the GSH-Px protein level respectively. Conclusion These results indicate that the blood GSH-Px protein level is decreased in the low-Se residents. The Se status not only affects the GSH-Px activity but also regulate the GSH-Px protein level.

Dynamic impedance of piles in visco-elastic material considering axial loads

The dynamic impedance function of pile in visco-elastie material considering axial loads under lateral dynamic force was analyzed, and the beam dynamic differential equation was used to induce the dynamic impedance function. After analyzing the edge conditions, the dynamic impedance functions were deduced. Contrasted with the result that does not consider axial loads, the axial loads have obvious influence on the dynamic impedance function.And the results show that the dimensionless prarmeter of the dynamic impedance will change from 6 % to 9 % when considering axial loads, and dimensionless prarmeter of the dynamic impedance of the coupling horizontal-sway will increase by 31 %.

Effect of flame conditions on abrasive wear performance of HVOF sprayed nanostructured WC-12Co coatings

Nanostructured WC-12Co coatings were deposited by high velocity oxy-fuel (HVOF) spraying with an agglomerated powder. The effect of flame conditions on the microstructure of the nanostructured coatings was investigated. The wear properties of the coatings were characterized using a dry rubber-wheel wear test. The results show that the nanostructured WC-Co coatings consist of WC, W2C, W and an amorphous binder phase. The microstructure of the coating is significantly influenced by the ratio of oxygen flow to fuel flow. Under the lower ratio of oxygen/fuel flow, the nanostructured coating presents a relative dense microstructure and severe decarburization of WC phase occurs during spraying. With increasing ratio of oxygen/fuel flow, the bonding of WC particles in the coating becomes loose resulting from the original structure of feedstock and the decarburization of WC becomes less owing to limited heating to the powder. Both the decarburization of WC particles in spraying and the bonding among WC particles in the coatings affect the wear performance. The examination of the worn surfaces of the nanostructured coatings reveals that the dominant wear mechanisms would be spalling from the interface of WCCo splats when spray particles undergo a limited melting. While the melting state of the spray particles is improved,the dominant wear mechanisms become the plastic deformation and plowing of the matrix and spalling of WC particles from the matrix.

THE NAVIER-STOKES EQUATIONS IN STREAM LAYER AND ON STREAM SURFACE AND A DIMENSION SPLIT METHODS

In this paper,we proposal stream surface and stream layer.By using classical tensor calculus,we derive 3-D Navier-Stokes Equations(NSE)in the stream layer under semigeodesic coordinate system,Navier-Stokes equation on the stream surface and 2-D Navier-Stokes equations on a two dimensional manifold. After introducing stream function on the stream surface,a nonlinear initial-boundary value problem satisfies by stream function is obtained,existence and uniqueness of its solution are proven.Based this theory we proposal a new method called"dimension split method"to solve 3D NSE.

Optimization of spray conditions in cold spraying based on numerical analysis of particle velocity

The effects of the parameters involved in cold spray on the acceleration of particles are systematically investigated by a CFD code in order to reveal the main factors influencing significantly particle velocity. The parameters involved include nozzle geometry parameters, processing parameters and properties of spray particles. It is found that driving gas type, operating pressure and temperature are main processing parameters which influence particle velocity. As for nozzle geometry, the expansion ratio and divergent section length of spray gun nozzle show significant effects. Moreover, the density, size and morphology of powder also have significant effects on particle velocity. The effects of those main parameters are summarized in a comprehensive equation obtained through nonlinear regression of the simulated results for the estimation of particle velocity. The interactions of the parameters on particle acceleration can be examined through the equation. Moreover, the optimization of the dimensions of spray gun nozzle and spray parameters can be realized based on the obtained results.

Influence of TiCl_4 treatment on performance of dye-sensitized solar cell assembled with nano-TiO_2 coating deposited by vacuum cold spraying

Titanium tetrachloride (TiCl4) treatment was employed to TiO2 coating deposited on fluoride-doped tin oxide (FTO) conducting glass and indium oxide doped tin oxide (ITO) conducting glass, respectively. The nano-crystalline TiO2 coating was deposited using a composite powder composed of polyethylene glycol (PEG) and 25 nm TiO2 particles by vacuum cold spraying (VCS) process. A commercial N-719 dye was used to adsorb on the surface of TiO2 coating to prepare TiO2 electrode, which was applied to assemble dye-sensitized solar cell (DSC). The cell performance was measured under simulated solar light at an intensity of 100 mW·cm-2. Results show that with an FTO substrate the DSC composed of a VCS TiO2 electrode untreated by TiCl4 gives a short-circuit current density of 13.1 mA·cm-2 and an open circuit voltage of 0.60 V corresponding to an overall conversion efficiency of 4.4%. It is found that after TiCl4 treatment to the VCS TiO2 electrode with an FTO substrate, the short circuit current density of the cell increases by 31%, the open-circuit voltage increases by 60 mV and a higher conversion yield of 6.5% was obtained. However, when an ITO substrate is used to deposit TiO2 coating by VCS, after TiCl4 treatment, the conversion efficiency of the assembled cell reduces slightly due to corrosion of the conducting layer on the ITO glass by TiCl4.

Temperature Effect on the Mechanical Behavior of Acrylic Polymers under Quasi-static and Dynamic Loading

In this paper, the mechanical behavior of acrylic polymers at elevated temperature was investigated. Four acrylic polymers were tested at high strain rate by using compression Hopkinson bar and at quasi-static strain rate by using an Instron servo hydraulic axial testing machine with the testing temperature from 218K to 393K. The results show that the mechanical property of acrylic polymers depends heavily on the testing temperature. The yield stress and Young's modulus were found to decrease with increasing temperature at low strain rate. At very low temperature, the materials display typical brittle fracture; however their plasticity improves remarkably at high temperatures. The predictions of the mechanical behavior including the effect of temperature and strain rate using a proposed theoretical model have a good agreement with experimental results.

Expression and significance of Rap1A in testes ofazoospermic subjects

Aim: To evaluate the Rap1A mRNA expression and its significance in the testes of normal and azoospermic subjects. Methods: A cDNA microarray that contained Rap1A and some other genes such as RBM, EIF1 AY was used to identify the differential gene expression profiles between the normal and azoospermic testes. cDNA probes were prepared by labeling mRNA from azoospermic and normal testicular tissues through reverse transcription with Cy5-dUTP and Cy3-dUTP, respectively. The mixed cDNA probes were then hybridized with cDNA microarray (each containing 4096 unique human cDNA sequences). The fluorescent signals were scanned and the values of Cy5-dUTP and Cy3-dUTP on each spot were analyzed and calculated. In situ hybridization was employed to detect the expression of RaplA in the testes of 10 fertile and 39 azoospermic subjects. Results: One hundred and twenty-eight differentially expressed genes were found to be possibly related to azoospermia, of which 56 were up-regulated and 72, down-regulated genes. The mRNA expression of RaplA in the spermatogenic cells of azoospermic was stronger than that in those of the fertile testes. Conclusion: Rap1A may play certain roles in the development of azoospermia.

Structure and electrochemical properties of low-cobalt La_(1-x)Li_xNi_(3.2)Co_(0.3)Al_(0.3) (0≤x≤0.2) hydrogen storage electrode alloys

The structure and electrochemical properties of a new low cobalt hydrogen storage electrode alloys La1-xLixNi3.2Co0.3Al0.3 (0≤x≤0.2) were investigated with a different additions of Li in replacement of La. With the increase of Li contents the maximum discharge capacity increases from 240 mAh·g-1(x=0) to 328.4 mAh·g-1(x=0.1) and the cycle stability is improved correspondingly. The capacity decay can remain 28.6% (x=0.2) after 230 charge/discharge cycles. The high rate discharge(HRD) ability of the alloys(x≤0.1) is improved and the best HRD is 34.1%(x=0.1) under the discharge current density 1200 mA·g-1. It is found that the prepared alloys are basically composed of LaNi5 as matrix phase and LaNi3 as second phase(x≤0.1). But the abundance of LaNi3 phase dramatically decreases with increasing x. When x=0.2, a new phase Al(NiCo)3 is formed.

EFFECTS OF CHRONIC STRESS ON THE ACTIVITIES OF SOD, GSH-Px AND MDA LEVEL IN FEMALE RATS' BRAIN

Objective To observe the effects of chronic emotional stress on the activities of superoxide dismutase (SOD) and glutathione peroxidase (GSH-Px) and malonialdehyde (MDA) level in female rats’ brain. Methods The rats were randomly divided into 4 groups: normal control group (group N), emotional stress group (group E), emotional stress + pregnancy group (group E+P) and regularly drinking group (group R). Emotional stress in rats was induced by training rats with empty drinking bottles. Having been finished the stress procedure, the brain was taken out and homogenized. Then the activities of SOD, GSH-Px and MDA level were measured. Results Compared to group N, both the activities of SOD in brain tissues of group E and group E+P were significantly decreased ( P <0.05 and P <0.01, respectively) while the MDA level increased ( P <0.05). However, the extent of changes in group E+P was more obvious than that in E. GSH-Px activities in E+P and E were significantly changed. However, the GSH-Px activity in E+P was decreased ( P <0.05) while the activity in E increased ( P <0.05).Conclusion The chronic emotional stress can reduce the antioxidative system by decreasing the antioxidative enzyme activity and potentiating the lipid peroxidation in the brain. It is also suggested that the combination of emotional stress and pregnancy can augment the oxidative damage in rats’ brain.

Microstructure evolution of cold-sprayed coating during deposition and through post-spraying heat treatment

The microstructural features of cold-sprayed coatings were investigated using Cu, Ti and Zn feedstocks by optical microscopy, scanning electron microscopy and transmission electron microscopy to reveal the microstructure evolution mechanisms in cold spray. Four typical effects including tamping, refinement, impact-induced fusion and annealing were examined on microstrueture. It is found that the microstructure of cold spray coating is remarkably influenced by spray materials. Ti coatings consist of evident porous layer and Cu coatings present a limited porous layer only near the surface. It is clear that the successive tamping effect and dynamic refinement of grains significantly influence the microstructure evolution of cold-sprayed coating. The tamping effect leads to the densification of porous coating layer gradually and the refinement effect leads to the formation of fine microstructure. It is considered that the large difference in the formation of porous layer is attributed to the dynamic impact pressure and hardenability of materials. It is also found that the impact-induced fusion during deposition of Zn coating can also modify the interfacial microstructure between particles in cold spray coating. Moreover, the nanocrystalline phase can be formed at the interfaces among particles resulting from the localized melting of the interfaces and tamping effect. Furthermore, the annealing treatment can modify the microstructure and property of a cold-sprayed coating.

Influence of gas flow on thermal field and stress during growth of sapphire single crystal using Kyropoulos method

The professional modeling software package CrysVUn was employed to study the process of a large sapphire single crystal growth using Kyropoulos method.The influence of gas pressure on thermal field,solid-liquid interface shape,gas velocity field and von Mises stress were studied for the first time.It is found that the root of the seed melt when gas pressure equals to one atmosphere or more than one atmosphere,especially during the seeding period,this result is consistent with the experimental observation,and this paper presents three ways to solve this problem.The temperature gradient and stress decreases significantly as the gas pressure increases.The convexity of the solid-liquid interface slightly increases when the gas pressure increases.Numerical analysis was used to optimize the hot zone design.

Preparation and characteristic of NASICON ceramics

Hot-pressed sintering was employed to prepare the sodium super ionic conductor (Na1+xZr2SixP3-xO12, 1.8≤x≤2.2) ceramics and compare with the sample obtained from normal-press sintering. The phase formation, density, and conductivity of the hot-press sintered and the normal-press sintered samples were investigated in detail. Results show that the density of NASICON ceramics and the degree of crystallization can be improved by hot-press process efficiently. The density of the sample sintered by normal sintering is obviously lower than that sintered by hot press. XRD analysis indicates all the hot press sintered samples contain mainly monoclinic NASICON and no ZrO2 phase was found. The ionic conductivity of normal-press sintered sample is much lower than that of hot-press sintered sample. When the composition is close to Na3Zr2Si2PO12, the dc conductivities of the hot press sintered samples were in the order of 10-3 S·cm-1. The variation of the ac conductivity with frequency in the high frequency region agrees with the power law feature of σ(ω)∝ωn(0<n<1).

Cardiomyocyte-like differentiation of human bone marrow mesenchymal stem cells after exposure to 5-azacytidine in vitro

Objective To investigate the potential of adult mesenchymal stem cells (MSCs) derived from human bone marrow to undergo cardiomyogenic differentiation after exposure to 5-azacytidine (5-aza) in vitro. Methods A small bone marrow aspirate was taken from the iliac crest of human volunteers, and hMSCs were isolated by 1.073g/mL Percoll and propagated in the right cell culturing medium as previously described. The phenotypes of hMSCs were characterized with the use of flow cytometry. The hMSCs were cultured in cell culture medium (as control) and medium mixed with 5-aza for cellular differentiation. We examined by immunohistochemistry at 21 days the inducement of desmin, cardiac-specific cardiac troponin I (cTnI), GATA 4 and connexin-43 respectively. Results The hMSCs are fibroblast-like morphology and express CD44+ CD29+ CD90+ / CD34- CD45- CD31- CD11a. After 5-aza treatment, 20-30% hMSCs connected with adjoining cells and coalesced into myotube structures after 14days. Twenty-one days after 5-aza treatment, immunofluorescence showed that some cells expressed desmin,GATA4, cTnI and connexin-43 in 5,10 μmol/L 5-aza groups, but no cardiac specific protein was found in neither 3μmol/L 5-aza group nor in the control group. The ratio of cTnI positively stained cells in 10 μmol/L group was higher than that in 5 μmol/L group (65.3 ± 4.7% vs 48.2 ± 5.4%, P ＜ 0.05). Electron microscopy revealed that myofilaments were formed. The induced cells expressed cardiac-myosin heavy chain (MyHC) gene by reverse transcription-polymerase chain reaction (RT-PCR). Conclusions Theses findings suggest that hMSCs from adult bone marrow can be differentiated into cardiac-like muscle cells with 5-aza inducement in vitro and the differentiation is in line with the 5-aza concentration. (J Geriatr Cardiol 2004;1(2) :101-107. )

Coronary artery disease in Chinese adults with type 2 diabetes mellitus estimated by electron beam computed tomography and electron beam computed tomography angiography

Objective To assess the prevalence and risk of coronary artery disease(CAD)in Chinese adults with type 2 diabetes mellitus(T2DM)using electron beam computed tomography(EBCT)and EBCT angiography(EBCTA).Methods:Ninety-four cases were enrolled in this study including diabetes(n=28),impaired glucose tolerance(IGT,n=30),coronary heart disease(CHD,n=11),and control(n=25).Cardiac EBCT plain scanning and EBCTA were performed on all of these subjects to evaluate coronary artery calcifica-tion(CAC)scores,and number of segments of stenosed coronary arteries.Both CAC and/or coronary artery stenosis were defined as patients with coronary artery lesions(CAL).Results CAC scores were not different with the control,diabetes,IGT,or CHD(P>0.05)groups.Compared to control(0.520±1.295),more stenosed coronary arteries segments(P<0.05)were detected in diabetes(2.964±1.915),IGT(2.200±2.024),and CHD(2.273±1.679).Number of stenosed artery segments were correlated with age(r=0.215,P=0.019),postprandial glucose(r=0.224,P=0.015),total cholesterol(r=0.323,P=0.000),and duration of diabetes(r=0.208,P=0.004).The incidences of CAL in diabetes(96.43%),IGT(93.33%),and CHD(90.91%)was substantially higher than that in normal control(56.00%,P<0.01).The odds ratio of CAL associated with having diabetes was estimated to be 7.514(95%CI:1.885-63.778).Conclusions Coronary artery lesions are prevalent in Chinese adults with type 2 diabetes,implying a high CAD risk.EBCTA holds potential in depicting the details of CAL and can be used to track the progression of CAD in diabetes patients.

Effect of cooling rate on evolution of superconducting phases during decomposition and recrystallization of (Bi,Pb)-2223 core in Ag-sheathed tape

The reformation of (Bi,Pb)-2223 from the liquid or melt is very important for a melting process of (Bi,Pb)-2223 tape. By combination of quenching experiment with X-ray diffraction (XRD) analysis, the effect of cooling rate on the evolution of three superconducting phases in the (Bi,Pb)-2223 core of Ag-sheathed tape was investigated. The results show that (Bi,Pb)-2223 reformation from the melt seems to experience different routes during slowly cooling at different rates. One is that (Bi,Pb)-2223 phase reformed directly from the melt, and no Bi-2212 participate in this process. The other is that (Bi,Pb)-2223 is converted from the intermediate product, Bi-2212, which formed from the melt during the first cooling stage. Due to the inherent sluggish formation kinetics of (Bi,Pb)-2223 from Bi-2212, only partial (Bi,Pb)-2223 can finally be reformed with the second route.

Synthesis and electrochemical properties of sol-gel derived LiMn_(2)O_(4)cathode for lithium-ion batteries

Spinel LiMn_(2)O_(4)has been considered to be the most promising alternative cathode material for the new generation of lithium-ion batteries in terms of its low cost,non-toxicity and easy manufacture.The spinel lithium manganese mixed oxides were prepared from lithium nitrate,manganese nitrate and citric acid by a sol-gel method and were characterized by thermogravimetric analysis,X-ray diffraction,cyclic voltammetry and constant current charging-discharging technique.The different sintering temperatures for different time have strong influence on the structure,initial discharge capacity and cycling performance of the lithium manganese oxide.It shows that the lithium manganese oxides sintered at 700℃for 10 h have a single spinel structure and better electrochemical properties.The initial discharging capacity can be up to 125.9 mAh·g^(-1),even after six cycles,it still retains 109.1 mAh·g^(-1).

Multi-scale analysis of earthquake activity in Chinese mainland

Identifying the active and inactive period of earthquakes in Chinese mainland is of great importance for guiding mid-short term, especially short term, earthquake forecast.……