质子交换膜燃料电池用碳纤维纸的研究进展

碳纤维纸是目前质子交换膜燃料电池(PEMFC)气体扩散层首选材料。基于湿法成纸技术,针对碳纤维纸原材料(短切碳纤维)在成纸过程中的分散展开分析,系统梳理了碳纤维成纸关键影响因素、碳纤维纸疏水改性及微孔层处理的方法,论述了国内外在改善碳纤维纸性能方面的研究情况。最后指出,未来碳纤维纸进一步发展的关键在于其原材料的技术开发和转化应用,以及碳纤维纸制备过程中的结构-性能关系研究和碳化石墨化过程机制研究。

Preparation and Properties of Regenerated Cellulose/Amylopectin Blend Fibers from 1-Butyl-3-Methylimidazolium Chloride with Controlled Biodegradation

Regenerated cellulose/amylopectin blend fibers with controlled biodegradation were produced using dry-jet wet-spinning technology from cellulose/amylopectin/1-butyl-3-methylimidazolium chloride blends.Morphological,structural and chemical analyses revealed that dense,homogeneous and void-free blend fibers were prepared in a two-stage dissolution process.The blend fibers were regenerated from water and treated with water or 95%(volume fraction)ethanol.However,cellulose-amylopectin interactions caused crystalline rearrangements in the blend fibers,resulting in a general decrease in crystallinity.Generally,tensile properties decreased with increasing amylopectin content,except that the blend fibers with 10%(mass fraction)amylopectin exhibited higher tensile strength than the regenerated cellulose control fibers.Ethanol treatment reduced the hydrophilicity of the blend fibers,increasing the crystallinity of the blend fibers.The blend fibers exhibited remarkable degradation,directly proportional to the amylopectin content.Despite higher crystallinity,ethanol-treated blend fibers degraded faster than water-treated fibers,indicating amylopectin and ethanol regulated the degradation.

Enhancing selectivity in acidic CO_(2) electrolysis:Cation effects and catalyst innovation

The electrochemical reduction of CO_(2)(eCO_(2)R)under ambient conditions is crucial for reducing carbon emissions and achieving carbon neutrality.Despite progress with alkaline and neutral electrolytes,their efficiency is limited by(bi)carbonates formation.Acidic media have emerged as a solution,addressing the(bi)carbonates challenge but introducing the issue of the hydrogen evolu-tion reaction(HER),which reduces CO_(2) conversion efficiency in acidic environments.This review focuses on enhancing the selectivity of acidic CO_(2) electrolysis.It commences with an overview of the latest advancements in acidic CO_(2) electrolysis,focusing on product selectivity and electrocatalytic activity enhancements.It then delves into the critical factors shaping selectivity in acidic CO_(2) electrolysis,with a special emphasis on the influence of cations and catalyst design.Finally,the research challenges and personal perspectives of acidic CO_(2) electrolysis are suggested.

In-situ thermal Raman mapping and stress analysis of CNT/CF/epoxy interfaces

A study of the interfacial behavior and internal thermal stress distribution in fiber-reinforced composites is essential to assess their performance and reliability.CNT/carbon fiber(CF)hybrid fibers were constructed using electrophoretic deposition.The interfacial properties of CF/epoxy and CNT/CF/epoxy composites were statistically investigated and compared using in-situ thermal Raman mapping by dispersing CNTs as a Raman sensing medium(CNT_(R))in a resin.The associated local thermal stress changes can be simulated by capturing the G'band position distribution of CNT_(R) in the epoxy at different temperatures.It was found that the G'band shifted to lower positions with increasing temperature,reaching a maximum difference of 2.43 cm^(−1) at 100℃.The interfacial bonding between CNT/CF and the matrix and the stress distribution and changes during heat treatment(20-100℃)were investig-ated in detail.This work is important for studying thermal stress in fiber-reinforced composites by in-situ thermal Raman mapping technology.

Fluorescence color tuning of dual-emission carbon quantum dots pro-duced from biomass and their use in Fe3+and Cu2+detection

Using simple and eco-friendly ethanol solvothermal treatment,dual-emission biomass carbon quantum dots(D-BCQDs)were synthesized from biomass viburnum awabuki leaves.Under excitation with 413 nm wavelength light two emission peaks appeared at 490 and 675 nm and the dots could be tuned to emit crimson,red,purplish red,purple and blue-gray fluorescence by changing the solvothermal temperature from 140℃ to 160,180,200 and 240℃,respectively.XPS and FTIR characterization in-dicated that the fluorescence color was mainly determined by surface oxidation defects,elemental nitrogen and sp^(2)-C/sp^(3)-C hybrid-ized structural domains.The D-BCQDs could not only detect Fe^(3+)or Cu^(2+),but also quantify the concentration ratio of Fe^(3+)to Cu^(2+)in a solution containing both,demonstrating their potential applications in the simultaneous detection of Fe^(3+)and Cu^(2+)ions.

Recent Advances in Transition Metal-Based Catalysts for Electrocatalytic Nitrate Reduction Reaction

The accumulation of excessive nitrate in the atmosphere not only jeopardizes human health but also disrupts the balance of the nitrogen cycle in the ecosystem.Among various nitrate removal technologies,electrocatalytic nitrate reduction reaction(eNO_(3)RR)has been widely studied for its advantages of being eco-friendly,easy to operate,and controllable under environmental conditions with renewable energy as the driving force.Transition metal-based catalysts(TMCs)have been widely used in electrocatalysis due to their abundant reserves,low costs,easy-to-regulate electronic structure and considerable electrochemical activity.In addition,TMCs have been extensively studied in terms of the kinetics of the nitrate reduction reaction,the moderate adsorption energy of nitrogen-containing species and the active hydrogen supply capacity.Based on this,this review firstly discusses the mechanism as well as analyzes the two main reduction products(N_(2)and NH_(3))of eNO_(3)RR,and reveals the basic guidelines for the design of efficient nitrate catalysts from the perspective of the reaction mechanism.Secondly,this review mainly focuses on the recent advances in the direction of eNO_(3RR)with four types of TMCs,Fe,Co,Ni and Cu,and unveils the interfacial modulation strategies of Fe,Co,Ni and Cu catalysts for the activity,reaction pathway and stability.Finally,reasonable suggestions and opportunities are proposed for the challenges and future development of eNO_(3)RR.This review provides far-reaching implications for exploring cost-effective TMCs to replace high-cost noble metal catalysts(NMCs)for eNO_(3)RR.

Mesoporous Carbon Nanofibers Loaded with Ordered PtFe Alloy Nanoparticles for Electrocatalytic Nitrate Reduction to Ammonia

Highly dispersed bimetallic alloy nanoparticle electrocatalysts have been demonstrated to exhibit exceptional performance in driving the nitrate reduction reaction(NO_(3)RR)to generate ammonia(NH_(3)).In this study,we prepared mesoporous carbon nanofibers(mCNFs)functionalized with ordered PtFe alloys(O-PtFe-mCNFs)by a composite micelle interface-induced co-assembly method using poly(ethylene oxide)-block-polystyrene(PEO-b-PS)as a template.When employed as electrocatalysts,O-PtFe-mCNFs exhibited superior electrocatalytic performance for the NO_(3RR)compared to the mCNFs functionalized with disordered PtFe alloys(D-PtFe-mCNFs).Notably,the NH_(3)production performance was particularly outstanding,with a maximum NH_(3)yield of up to 959.6μmol/(h·cm~2).Furthermore,the Faraday efficiency(FE)was even 88.0%at-0.4 V vs.reversible hydrogen electrode(RHE).This finding provides compelling evidence of the potential of ordered PtFe alloy catalysts for the electrocatalytic NO_(3)RR.

Highly dispersed nickel species on iron‐based perovskite for CO_(2) electrolysis in solid oxide electrolysis cell

Feasible construction of cathode materials with highly dispersed active sites can extend the tri‐ple‐phase boundaries,and therefore leading to enhanced electrode kinetics for CO_(2) electrolysis in solid oxide electrolysis cell(SOEC).Herein,highly dispersed nickel species with low loading(1.0 wt%)were trapped within the La_(0.8)Sr_(0.2)FeO_(3)–δ‐Ce_(0.8)Sm_(0.2)O_(2)–δvia a facial mechanical milling ap‐proach,which demonstrated excellent CO_(2) electrolysis performance.The highly dispersed nickel species can significantly alter the electronic structures of the LSF‐SDC without affecting its porous network and facilitate oxygen vacancy formation,thus greatly promote the CO_(2) electrolysis perfor‐mance.The highest current density of 1.53 A·cm^(-2) could be achieved when operated under 800℃ at 1.6 V,which is about 91%higher than the LSF‐SDC counterpart.

Preparation and Properties of Self-Crimping Polyamide-Based Side-by-Side Bicomponent Elastic Fibers

Side-by-side bicomponent fibers have a spring-like three-dimensional spiral crimp structure and are widely used in elastic fabric.The difference in thermal shrinkage between different polymers can produce an unbalanced stress during the cooling process,and this unbalanced stress can be exploited to prepare naturally crimped fibers by spinning design.In this work,different types of polyamides(PAs)were selected for fabrication of the PA-based side-by-side bicomponent elastic fibers using melt spinning,and the structure development and performance of such bicomponent elastic fibers were studied.Meanwhile,thermoplastic PA elastomer(TPAE)with intrinsic elasticity was also used as one of the comparative materials.The block structure of the PA segment and the polyether segment in the TPAE molecule is the key to providing thermal shrinkage differences and forming a good interface structure.As a result,the crimp ratio of PA6/TPAE bicomponent elastic fiber is 7.23%,which is better than that of the currently commercialized T400 fiber(6.72%).The excellent crimp performance of PA6/TPAE bicomponent elastic fibers comes from the asymmetric distribution of the stress along the radial direction of the fibers during the cooling process,which is caused by the difference in thermal shrinkage between PA6 and TPAE.In addition,the crimp formability of the PA-based bicomponent elastic fibers could be improved by expanding the shrinkage stress through wet-heat treatment.The crimp ratio of PA6/TPAE bicomponent elastic fibers reaches the maximum(33.08%)after treatment at 100℃.At the same time,the fabric made of PA6/TPAE bicomponent elastic fibers has the excellent air and water vapor permeability,with an air permeability of 272.76 mm/s and a water vapor transmission rate of 406.71 g/(m^(2)·h).

Triple Aza[6]helicenes with Circularly Polarized Luminescence:N-Alkylation as a Tool to Tune the Chiroptical Properties

Recently,multiple helicenes have attracted enormous attention due to their exceptionally distorted conjugated architectures,appealing optical properties and unique spatial stacking patterns.The electronic and optical properties of multiple helicenes could be modulated by heteroatom doping.Herein,the first triple aza[6]helicene was reported by an intramolecular oxidation reaction,which exhibited highly distorted propeller-like geometry revealed by single crystal X-ray diffraction analysis.In comparison to the reported triple oxa[6]helicene,the triple aza[6]helicene demonstrated increased quantum yield(5.5%),and chiroptical properties with a|gabs|value of 0.012 and a|glum|value of 3.0×10^(-3).Furthermore,the stability and chiroptical properties of the triple aza[6]helicene could be enhanced by N-alkylation.