SMA高级醇酯的合成及其对HDPE表面的改性

以苯乙烯-马来酸酐共聚物(SMA)为骨架,通过酯化反应,在SMA上接枝不同链长的高级脂肪醇侧链,制备了一系列大分子表面改性剂。将SMA及其高级醇酯化物与高密度聚乙烯(HDPE)进行共混,利用全反射红外光谱(FT-IR-ATR)及水接触角对共混体系的表面特性进行了研究。结果表明:在较低添加量范围内(w≤0.04),SMA的高级醇酯化物可以在HDPE薄膜的表面择优富集,可明显降低薄膜的水接触角,提高薄膜的表面能。

LLDPE/SMA共混膜表面接枝PEG的研究

Linear low-density polyethylene(LLDPE) was melt blended with styrene-maleic anhydride copolymer(SMA).The blending films were then immersed in poly(ethylene glycol)400(PEG400) at room temperature.The surface composition of the blend films was determined by Fourier transform infra-red spectroscopy coupled with an variable incidence angle attenuated total reflection accessory(ATR-FTIR).It has been found that PEG400 was grafted onto the surface of the films via esterification with SMA.PEG immersion promoted enrichment of SMA onto the surface of the films.The water contact angle data show that grafting of PEG400 can greatly improve the hydrophilicity of the PE surface.These experiments show that surface functionalization of polyethylene films by blending SMA and then surface grafting of PEG is a feasible process,which suggest a viable and simple route for PE surface modification via blending and grafting.

聚马来酸酐高级脂肪醇酯的合成及其对聚乙烯的表面改性研究

采用溶液聚合的方法合成聚马来酸酐,考察不同聚合条件对聚马来酸酐产率的影响。将所合成的聚马来酸酐与十八醇、十六醇和十四醇进行酯化反应合成了三种两亲性的大分子表面改性剂聚马来酸酐十八醇酯(PMAO)、聚马来酸酐十六醇酯(PMAH)和聚马来酸酐十四醇酯(PMAT)。对这三种聚马来酸酐高级醇酯/聚乙烯共混体系的表面亲水性进行了研究,采用全反射红外光谱对聚马来酸酐高级醇酯共混体系薄膜进行表征,发现聚马来酸酐高级醇酯可以在聚乙烯薄膜表面富集,接触角测量表明聚马来酸酐高级醇酯的加入可以有效降低聚乙烯薄膜的水接触角。