Constant-current anodization of pure aluminum was carried out in non-corrosive capacitor working electrolytes to study the formation mechanism of nanopores in the anodic oxide films.Through comparative experiments,nan...Constant-current anodization of pure aluminum was carried out in non-corrosive capacitor working electrolytes to study the formation mechanism of nanopores in the anodic oxide films.Through comparative experiments,nanopores are found in the anodic films formed in the electrolytes after high-temperature storage(HTS)at 130°C for 240 h.A comparison of the voltage-time curves suggests that the formation of nanopores results from the decrease in formation efficiency of anodic oxide films rather than the corrosion of the electrolytes.FT-IR and UV spectra analysis shows that carboxylate and ethylene glycol in electrolytes can easily react by esterification at high temperatures.Combining the electronic current theory and oxygen bubble mold effect,the change in electrolyte composition could increase the electronic current in the anodizing process.The electronic current decreases the formation efficiency of anodic oxide films,and oxygen bubbles accompanying electronic current lead to the formation of nanopores in the dense films.The continuous electronic current and oxygen bubbles are the prerequisites for the formation of porous anodic oxides rather than the traditional field-assisted dissolution model.展开更多
The(Cu−10Sn)−Ni−MoS2 composites,prepared by powder metallurgy,were studied for the effects of Ni-coated MoS2 on the microstructure,mechanical properties and lubricating properties.The mechanism of effects of Ni and Mo...The(Cu−10Sn)−Ni−MoS2 composites,prepared by powder metallurgy,were studied for the effects of Ni-coated MoS2 on the microstructure,mechanical properties and lubricating properties.The mechanism of effects of Ni and MoS2 on the properties of composites was analyzed through a comparative experiment by adding Ni and MoS2 separately.The results show that the nickel wrapping around the MoS2 particles decreases the reaction rate of MoS2 with the copper matrix,and greatly improves the bonding of the matrix.The composites with 12 wt.%Ni-coated MoS2(C12)show the optimum performance including the mechanical properties and tribological behaviors.Under oil lubrication conditions,the friction coefficient is 0.0075 with a pressure of 8 MPa and a linear velocity of 0.25 m/s.The average dry friction coefficient,sliding against 40Cr steel disc,is measured to be 0.1769 when the linear velocity and pressure are 0.25 m/s and 4 MPa,respectively.展开更多
The photocatalytic activity of carbon nitride(CN)materials is mainly limited to small specific surface areas,limited solar absorption,and low separation and mobility of photoinduced carriers.In this study,we developed...The photocatalytic activity of carbon nitride(CN)materials is mainly limited to small specific surface areas,limited solar absorption,and low separation and mobility of photoinduced carriers.In this study,we developed a precursor-modified strategy for the synthesis of graphitic CN with highly efficient photocatalytic performance.The precursor dicyandiamide reformed by different acids undergoes a basic structural change and transforms into diverse new precursors.The thin porous amino-rich HNO_(3)-CN(5H-CN)was calcined by dicyandiamidine nitrate,formed by concentrated nitric acid modified dicyandiamide,and presented the best photocatalytic degradation rate of Rh B,more than 34 times that of bulk graphitic CN.Moreover,the photocatalytic hydrogen evolution rate of 5H-CN significantly improved.The TG-DSC-FTIR analyses indicated that the distinguishing thermal polymerization process of 5H-CN led to its thin porous amino-rich structure,and the theoretical calculations revealed that the negative conduction band potential of 5H-CN was attributed to its amino-rich structure.It is anticipated that the thin porous structure and the negative conduction band position of 5H-CN play important roles in the improvement of the photocatalytic performance.This study demonstrates that precursor modification is a promising project to induce a new thermal polycondensation process for the synthesis of CN with enhanced photocatalytic performance.展开更多
To improve separation efficiency of the photogenerated electron-hole pairs,constructing a heterojunction is considered to be a promising strategy.However,the fabrication of heterojunction via a facile route to achieve...To improve separation efficiency of the photogenerated electron-hole pairs,constructing a heterojunction is considered to be a promising strategy.However,the fabrication of heterojunction via a facile route to achieve a substantial improvement in photocatalytic performance is still challenging.In this work,a well-designed nanosheet-based rodlike step-scheme(S-scheme)heterojunction Bi_(4)O_(5)I_(2)/Bi_(4)O_(5)Br_(2) with rich oxygen vacancies(OVs)(Bi_(4)O_(5)I_(2)/Bi_(4)O_(5)Br_(2)-OV)was easily synthesized by calcining BiOAc0.6Br0.2I0.2(Ac-=CH3 COO-)precursor.The as-prepared Bi4O5I2/Bi4O5Br2-OV exhibited excellent visible light photocatalytic performance towards antibiotic tetracycline(TC)and dye rhodamine B(Rh B)degradation and removal rate reached 90.2% and 97.0%within 120 min,respectively,which was higher than those of Bi4O5I2-OV(56.8% and 71.8%),Bi4O5Br2-OV(47.4%and 68.4%),solid solution BiOAc0.6Br0.2I0.2(67.0% and 84.0%)and Bi_(4)O_(5)I_(2)/Bi_(4)O_(5)Br_(2) with poor oxygen vacancies(Bi4O5I2/Bi4O5Br2-P)(30.6%and 40.4%).Owing to the release of heat and generation of reducing carbon during calcining the precursor with Ac-,it could not only reduce the generation temperature of Bi-rich bismuth oxyhalides,which thus decreased particle size and increased surface areas,but also introduce surface OVs,which could trap photoelectrons and inhibit the recombination of carriers.In addition,the calcination of single solid solution precursor benefited to the formation of well-alloyed interfaces with larger contact areas between 2D/2D nanosheet-like materials,which facilitates charge carriers transfer at the interfaces.The Bi4O5I2/Bi4O5Br2-OV also shows the desirable removal rate for TC and Rh B in actual wastewater or in the presence of some electrolytes.This study provides an effective and simple strategy for designing OVs modified Bi-rich oxyhalides heterojunctions.展开更多
The formation mechanism of porous anodic oxides remains unclear till now.The classical field-assisted dissolution(FAD)theory cannot explain the relationship between the current curve and FAD reaction,and the influence...The formation mechanism of porous anodic oxides remains unclear till now.The classical field-assisted dissolution(FAD)theory cannot explain the relationship between the current curve and FAD reaction,and the influence of the electrode potential on anodization is rarely reported.The electrode potential theory,oxygen bubble model and the ionic current and electronic current theories were introduced to explain the growth of porous anodic oxides of three metals(Ti,Zr and Fe).Taking the anodization of Ti in aqueous solution containing 0.5wt% NH_(4)F as an example,the electrode potential was calculated,and the morphology of porous anodic oxides was investigated at low voltages.Results show that the growth of porous anodic oxides is determined by the ratio of the ionic current to the electronic current.During the anodization,metals are classified into two groups:one is easy to form the compact oxide layer,and the other is easy to induce oxygen releasing,thus forming oxygen bubbles.The electrolyte is also classified into two groups correspondingly:compact oxide layer-assisted electrolyte and releasing oxygen-assisted electrolyte.展开更多
基金financially supported by the National Natural Science Foundation of China(Nos.51777097,51577093)。
文摘Constant-current anodization of pure aluminum was carried out in non-corrosive capacitor working electrolytes to study the formation mechanism of nanopores in the anodic oxide films.Through comparative experiments,nanopores are found in the anodic films formed in the electrolytes after high-temperature storage(HTS)at 130°C for 240 h.A comparison of the voltage-time curves suggests that the formation of nanopores results from the decrease in formation efficiency of anodic oxide films rather than the corrosion of the electrolytes.FT-IR and UV spectra analysis shows that carboxylate and ethylene glycol in electrolytes can easily react by esterification at high temperatures.Combining the electronic current theory and oxygen bubble mold effect,the change in electrolyte composition could increase the electronic current in the anodizing process.The electronic current decreases the formation efficiency of anodic oxide films,and oxygen bubbles accompanying electronic current lead to the formation of nanopores in the dense films.The continuous electronic current and oxygen bubbles are the prerequisites for the formation of porous anodic oxides rather than the traditional field-assisted dissolution model.
基金Projects(51371099,51501091)supported by the National Natural Science Foundation of China。
文摘The(Cu−10Sn)−Ni−MoS2 composites,prepared by powder metallurgy,were studied for the effects of Ni-coated MoS2 on the microstructure,mechanical properties and lubricating properties.The mechanism of effects of Ni and MoS2 on the properties of composites was analyzed through a comparative experiment by adding Ni and MoS2 separately.The results show that the nickel wrapping around the MoS2 particles decreases the reaction rate of MoS2 with the copper matrix,and greatly improves the bonding of the matrix.The composites with 12 wt.%Ni-coated MoS2(C12)show the optimum performance including the mechanical properties and tribological behaviors.Under oil lubrication conditions,the friction coefficient is 0.0075 with a pressure of 8 MPa and a linear velocity of 0.25 m/s.The average dry friction coefficient,sliding against 40Cr steel disc,is measured to be 0.1769 when the linear velocity and pressure are 0.25 m/s and 4 MPa,respectively.
文摘The photocatalytic activity of carbon nitride(CN)materials is mainly limited to small specific surface areas,limited solar absorption,and low separation and mobility of photoinduced carriers.In this study,we developed a precursor-modified strategy for the synthesis of graphitic CN with highly efficient photocatalytic performance.The precursor dicyandiamide reformed by different acids undergoes a basic structural change and transforms into diverse new precursors.The thin porous amino-rich HNO_(3)-CN(5H-CN)was calcined by dicyandiamidine nitrate,formed by concentrated nitric acid modified dicyandiamide,and presented the best photocatalytic degradation rate of Rh B,more than 34 times that of bulk graphitic CN.Moreover,the photocatalytic hydrogen evolution rate of 5H-CN significantly improved.The TG-DSC-FTIR analyses indicated that the distinguishing thermal polymerization process of 5H-CN led to its thin porous amino-rich structure,and the theoretical calculations revealed that the negative conduction band potential of 5H-CN was attributed to its amino-rich structure.It is anticipated that the thin porous structure and the negative conduction band position of 5H-CN play important roles in the improvement of the photocatalytic performance.This study demonstrates that precursor modification is a promising project to induce a new thermal polycondensation process for the synthesis of CN with enhanced photocatalytic performance.
文摘To improve separation efficiency of the photogenerated electron-hole pairs,constructing a heterojunction is considered to be a promising strategy.However,the fabrication of heterojunction via a facile route to achieve a substantial improvement in photocatalytic performance is still challenging.In this work,a well-designed nanosheet-based rodlike step-scheme(S-scheme)heterojunction Bi_(4)O_(5)I_(2)/Bi_(4)O_(5)Br_(2) with rich oxygen vacancies(OVs)(Bi_(4)O_(5)I_(2)/Bi_(4)O_(5)Br_(2)-OV)was easily synthesized by calcining BiOAc0.6Br0.2I0.2(Ac-=CH3 COO-)precursor.The as-prepared Bi4O5I2/Bi4O5Br2-OV exhibited excellent visible light photocatalytic performance towards antibiotic tetracycline(TC)and dye rhodamine B(Rh B)degradation and removal rate reached 90.2% and 97.0%within 120 min,respectively,which was higher than those of Bi4O5I2-OV(56.8% and 71.8%),Bi4O5Br2-OV(47.4%and 68.4%),solid solution BiOAc0.6Br0.2I0.2(67.0% and 84.0%)and Bi_(4)O_(5)I_(2)/Bi_(4)O_(5)Br_(2) with poor oxygen vacancies(Bi4O5I2/Bi4O5Br2-P)(30.6%and 40.4%).Owing to the release of heat and generation of reducing carbon during calcining the precursor with Ac-,it could not only reduce the generation temperature of Bi-rich bismuth oxyhalides,which thus decreased particle size and increased surface areas,but also introduce surface OVs,which could trap photoelectrons and inhibit the recombination of carriers.In addition,the calcination of single solid solution precursor benefited to the formation of well-alloyed interfaces with larger contact areas between 2D/2D nanosheet-like materials,which facilitates charge carriers transfer at the interfaces.The Bi4O5I2/Bi4O5Br2-OV also shows the desirable removal rate for TC and Rh B in actual wastewater or in the presence of some electrolytes.This study provides an effective and simple strategy for designing OVs modified Bi-rich oxyhalides heterojunctions.
基金National Natural Science Foundation of China(51577093,51777097)Natural Science Foundation of Jiangsu Higher Education Institutions(20KJB430040)+1 种基金Changzhou Science&Technology Program(CJ20200026)Qing Lan Project in Colleges and Universities of Jiangsu Province。
文摘The formation mechanism of porous anodic oxides remains unclear till now.The classical field-assisted dissolution(FAD)theory cannot explain the relationship between the current curve and FAD reaction,and the influence of the electrode potential on anodization is rarely reported.The electrode potential theory,oxygen bubble model and the ionic current and electronic current theories were introduced to explain the growth of porous anodic oxides of three metals(Ti,Zr and Fe).Taking the anodization of Ti in aqueous solution containing 0.5wt% NH_(4)F as an example,the electrode potential was calculated,and the morphology of porous anodic oxides was investigated at low voltages.Results show that the growth of porous anodic oxides is determined by the ratio of the ionic current to the electronic current.During the anodization,metals are classified into two groups:one is easy to form the compact oxide layer,and the other is easy to induce oxygen releasing,thus forming oxygen bubbles.The electrolyte is also classified into two groups correspondingly:compact oxide layer-assisted electrolyte and releasing oxygen-assisted electrolyte.
