The generation of multifunctional isolated active sites in zeolite supports is an attractive method for integrating multistep sequential reactions into a single‐pass tandem catalytic reaction.In this study,bifunction...The generation of multifunctional isolated active sites in zeolite supports is an attractive method for integrating multistep sequential reactions into a single‐pass tandem catalytic reaction.In this study,bifunctional TiSn‐Beta zeolite was prepared by a simple and scalable post‐synthesis approach,and it was utilized as an efficient heterogeneous catalyst for the tandem conversion of alkenes to 1,2‐diols.The isolated Ti and Sn Lewis acid sites within the TiSn‐Beta zeolite can efficiently integrate alkene epoxidation and epoxide hydration in tandem in a zeolite microreactor to achieve one‐step conversion of alkenes to 1,2‐diols with a high selectivity of>90%.Zeolite confinement effects result in high tandem rates of alkene epoxidation and epoxide hydration as well as high selectivity toward the desired product.Further,the novel method demonstrated herein can be employed to other tandem catalytic reactions for sustainable chemical production.展开更多
With the aim of reducing the cost of developing internal combustion engines,while at the same time investigating different geometries,layouts and fuels,3D-CFD-CHT simulations represent an indispensable part for the de...With the aim of reducing the cost of developing internal combustion engines,while at the same time investigating different geometries,layouts and fuels,3D-CFD-CHT simulations represent an indispensable part for the development of new technologies.These tools are increasingly used by manufacturers,as a screening process before building the first prototype.This paper presents an innovative methodology for virtual engine development.The 3D-CFD tool QuickSim,developed at FKFS,allows both a significant reduction in computation time and an extension of the simulated domain for complete engine systems.This is possible thanks to a combination of coarse meshes and self-developed internal combustion engine models,which simultaneously ensure high predictability.The present work demonstrates the capabilities of this innovative methodology for the design and optimization of different engines and fuels with the goal of achieving the highest possible combustion efficiencies and pollutant reductions.The analysis focuses on the influence of different fuels such as hydrogen,methanol,synthetic gasolines and methane on different engine geometries,in combination with suitable injection and ignition systems,including passive and active pre-chambers.Lean operations as well as knock reduction are discussed,particularly for methane and hydrogen injection.Finally,it is shown how depending on the chosen fuel,an appropriate ad-hoc engine layout can be designed to increase the indicated efficiency of the respective engines.展开更多
A circular and sustainable economy for the private transport sector requires a holistic view of the emitted CO_(2) emissions.Looking at the energy supplied to the vehicle in terms of a circular economy leads to defoss...A circular and sustainable economy for the private transport sector requires a holistic view of the emitted CO_(2) emissions.Looking at the energy supplied to the vehicle in terms of a circular economy leads to defossilisation.The remaining energy sources or forms are renewable electric energy,green hydrogen and renewable fuels.A holistic view of the CO_(2) emissions of these energy sources and forms and the resulting powertrain technologies must take into account all cradle-to-grave emissions for both the vehicle and the energy supply.In order to compare the different forms of energy,the three most relevant forms of powertrain technology are considered and a configuration is chosen that allows for an appropriate comparison.For this purpose,data from the FVV project“Powertrain 2040”are used[1]and combined with research data on the energy supply chain for passenger cars.The three comparable powertrain configurations are a battery electric vehicle,a fuel cell electric vehicle and an internal combustion engine hybrid vehicle fueled with electric fuel.First,the three selected powertrain configurations are presented in terms of their performance,weight,technology and other characteristics.A comparative analysis is carried out for different CO_(2) emissions of the electricity mix.The electricity mix is used for both the production of the vehicle and the energy.The results are presented in the form of cradle-to-wheel emissions,which consider the total CO_(2) emissions of the vehicle over its life cycle.Finally,the results are analyzed and discussed to determine which powertrain technology fits best into which energy sector CO_(2) emissions window.展开更多
文摘The generation of multifunctional isolated active sites in zeolite supports is an attractive method for integrating multistep sequential reactions into a single‐pass tandem catalytic reaction.In this study,bifunctional TiSn‐Beta zeolite was prepared by a simple and scalable post‐synthesis approach,and it was utilized as an efficient heterogeneous catalyst for the tandem conversion of alkenes to 1,2‐diols.The isolated Ti and Sn Lewis acid sites within the TiSn‐Beta zeolite can efficiently integrate alkene epoxidation and epoxide hydration in tandem in a zeolite microreactor to achieve one‐step conversion of alkenes to 1,2‐diols with a high selectivity of>90%.Zeolite confinement effects result in high tandem rates of alkene epoxidation and epoxide hydration as well as high selectivity toward the desired product.Further,the novel method demonstrated herein can be employed to other tandem catalytic reactions for sustainable chemical production.
文摘With the aim of reducing the cost of developing internal combustion engines,while at the same time investigating different geometries,layouts and fuels,3D-CFD-CHT simulations represent an indispensable part for the development of new technologies.These tools are increasingly used by manufacturers,as a screening process before building the first prototype.This paper presents an innovative methodology for virtual engine development.The 3D-CFD tool QuickSim,developed at FKFS,allows both a significant reduction in computation time and an extension of the simulated domain for complete engine systems.This is possible thanks to a combination of coarse meshes and self-developed internal combustion engine models,which simultaneously ensure high predictability.The present work demonstrates the capabilities of this innovative methodology for the design and optimization of different engines and fuels with the goal of achieving the highest possible combustion efficiencies and pollutant reductions.The analysis focuses on the influence of different fuels such as hydrogen,methanol,synthetic gasolines and methane on different engine geometries,in combination with suitable injection and ignition systems,including passive and active pre-chambers.Lean operations as well as knock reduction are discussed,particularly for methane and hydrogen injection.Finally,it is shown how depending on the chosen fuel,an appropriate ad-hoc engine layout can be designed to increase the indicated efficiency of the respective engines.
文摘A circular and sustainable economy for the private transport sector requires a holistic view of the emitted CO_(2) emissions.Looking at the energy supplied to the vehicle in terms of a circular economy leads to defossilisation.The remaining energy sources or forms are renewable electric energy,green hydrogen and renewable fuels.A holistic view of the CO_(2) emissions of these energy sources and forms and the resulting powertrain technologies must take into account all cradle-to-grave emissions for both the vehicle and the energy supply.In order to compare the different forms of energy,the three most relevant forms of powertrain technology are considered and a configuration is chosen that allows for an appropriate comparison.For this purpose,data from the FVV project“Powertrain 2040”are used[1]and combined with research data on the energy supply chain for passenger cars.The three comparable powertrain configurations are a battery electric vehicle,a fuel cell electric vehicle and an internal combustion engine hybrid vehicle fueled with electric fuel.First,the three selected powertrain configurations are presented in terms of their performance,weight,technology and other characteristics.A comparative analysis is carried out for different CO_(2) emissions of the electricity mix.The electricity mix is used for both the production of the vehicle and the energy.The results are presented in the form of cradle-to-wheel emissions,which consider the total CO_(2) emissions of the vehicle over its life cycle.Finally,the results are analyzed and discussed to determine which powertrain technology fits best into which energy sector CO_(2) emissions window.
