A heterojunction photocatalyst based on porous tubular g-C3N4 decorated with CdS nanoparticles was fabricated by a facile hydrothermal co-deposition method.The one-dimensional porous structure of g-C3N4 provides a hig...A heterojunction photocatalyst based on porous tubular g-C3N4 decorated with CdS nanoparticles was fabricated by a facile hydrothermal co-deposition method.The one-dimensional porous structure of g-C3N4 provides a higher specific surface area,enhanced light absorption,and better separation and transport performance of charge carriers along the longitudinal direction,all of which synergistically contribute to the superior photocatalytic activity observed.The significantly enhanced catalytic efficiency is also a benefit originating from the fast transfer of photogenerated electrons and holes between g-C3N4 and CdS through a built-in electric field,which was confirmed by investigating the morphology,structure,optical properties,electrochemical properties,and photocatalytic activities.Photocatalytic degradation of rhodamine B(RhB)and photocatalytic hydrogen evolution reaction were also carried out to investigate its photocatalytic performance.RhB can be degraded completely within 60 min,and the optimum H2 evolution rate of tubular g-C3N4/CdS composite is as high as 71.6μmol h^–1,which is about 16.3 times higher than that of pure bulk g-C3N4.The as-prepared nanostructure would be suitable for treating environmental pollutants as well as for water splitting.展开更多
To accelerate the kinetics of the oxygen reduction reaction(ORR)in proton exchange membrane fuel cells,ultrafine Pt nanoparticles modified with trace amounts of cobalt were fabricated and decorated on carbon black thr...To accelerate the kinetics of the oxygen reduction reaction(ORR)in proton exchange membrane fuel cells,ultrafine Pt nanoparticles modified with trace amounts of cobalt were fabricated and decorated on carbon black through a strategy involving modified glycol reduction and chemical etching.The obtained Pt36Co/C catalyst exhibits a much larger electrochemical surface area(ECSA)and an improved ORR electrocatalytic activity compared to commercial Pt/C.Moreover,an electrode prepared with Pt36Co/C was further evaluated under H2-air single cell test conditions,and exhibited a maximum specific power density of 10.27 W mgPt^-1,which is 1.61 times higher than that of a conventional Pt/C electrode and also competitive with most state-of-the-art Pt-based architectures.In addition,the changes in ECSA,power density,and reacting resistance during the accelerated degradation process further demonstrate the enhanced durability of the Pt36Co/C electrode.The superior performance observed in this work can be attributed to the synergy between the ultrasmall size and homogeneous distribution of catalyst nanoparticles,bimetallic ligand and electronic effects,and the dissolution of unstable Co with the rearrangement of surface structure brought about by acid etching.Furthermore,the accessible raw materials and simplified operating procedures involved in the fabrication process would result in great cost-effectiveness for practical applications of PEMFCs.展开更多
Highly efficient and stable bifunctional electrocatalysts that can be used for large-current-density electrolysis of alkaline seawater are highly desirable for carbon-neutral economies,but their facile and controllabl...Highly efficient and stable bifunctional electrocatalysts that can be used for large-current-density electrolysis of alkaline seawater are highly desirable for carbon-neutral economies,but their facile and controllable synthesis remains a challenge.Here,self-assembled ultralow Ru,Ni-doped Fe_(2)O_(3) with a lily shaped morphology was synthesized on iron foam(RuNi-Fe_(2)O_(3)/IF)via a facile one-step hydrothermal process,in which the intact lily shaped RuNi-Fe_(2)O_(3)/IF was obtained by adjusting the ratio of Ru/Ni.Benefitting from the Ru/Ni chemical substitution,the as-synthesized RuNi-Fe_(2)O_(3)/IF can act as free-standing dual-function electrodes that are applied to electrocatalysis for the hydrogen evolution(HER)and oxygen evolution reactions(OER)in 1.0 mol L^(-1) KOH,requiring an overpotential of 75.0 mV to drive 100 mA cm^(-2) for HER and 329.0 mV for OER.Moreover,the overall water splitting catalyzed by RuNi-Fe_(2)O_(3)/IF only demands ultralow cell voltages of 1.66 and 1.73 V to drive 100 mA cm^(-2) in 1.0 mol L^(-1) KOH and 1.0 mol L^(-1) KOH seawater electrolytes,respectively.The electrodes show remarkable long-term durability,maintaining current densities exceeding 100 mA cm^(-2) for more than 100 h and thus outperforming the two-electrode system composed of noble catalysts.This work provides an efficient,economical method to synthesize self-standing bifunctional electrodes for large-current-density alkaline seawater electrolysis,which is of significant importance for ecological protection and energy exploitation.展开更多
基金support from the National Natural Science Foundation of China(51602297 and U1510109)Major Research Project of Shandong Province(2016ZDJS11A04)+3 种基金Fundamental Research Funds for the Central Universities(201612007)Postdoctoral Innovation Program of Shandong Province(201603043)Australia Research Council(ARC)under the Project DP160104089Start-up Foundation for Advanced Talents of Qingdao University of Science and Technology(010022919)~~
文摘A heterojunction photocatalyst based on porous tubular g-C3N4 decorated with CdS nanoparticles was fabricated by a facile hydrothermal co-deposition method.The one-dimensional porous structure of g-C3N4 provides a higher specific surface area,enhanced light absorption,and better separation and transport performance of charge carriers along the longitudinal direction,all of which synergistically contribute to the superior photocatalytic activity observed.The significantly enhanced catalytic efficiency is also a benefit originating from the fast transfer of photogenerated electrons and holes between g-C3N4 and CdS through a built-in electric field,which was confirmed by investigating the morphology,structure,optical properties,electrochemical properties,and photocatalytic activities.Photocatalytic degradation of rhodamine B(RhB)and photocatalytic hydrogen evolution reaction were also carried out to investigate its photocatalytic performance.RhB can be degraded completely within 60 min,and the optimum H2 evolution rate of tubular g-C3N4/CdS composite is as high as 71.6μmol h^–1,which is about 16.3 times higher than that of pure bulk g-C3N4.The as-prepared nanostructure would be suitable for treating environmental pollutants as well as for water splitting.
基金supported by the National Major Research Project(2016YFB0101208)the National Natural Science Foundation of China(21576257)+1 种基金the Natural Science Foundation-Liaoning United Fund(U1508202)the Strategic Priority Research Program of the Chinese Academy of Sciences(XDB06050303)~~
文摘To accelerate the kinetics of the oxygen reduction reaction(ORR)in proton exchange membrane fuel cells,ultrafine Pt nanoparticles modified with trace amounts of cobalt were fabricated and decorated on carbon black through a strategy involving modified glycol reduction and chemical etching.The obtained Pt36Co/C catalyst exhibits a much larger electrochemical surface area(ECSA)and an improved ORR electrocatalytic activity compared to commercial Pt/C.Moreover,an electrode prepared with Pt36Co/C was further evaluated under H2-air single cell test conditions,and exhibited a maximum specific power density of 10.27 W mgPt^-1,which is 1.61 times higher than that of a conventional Pt/C electrode and also competitive with most state-of-the-art Pt-based architectures.In addition,the changes in ECSA,power density,and reacting resistance during the accelerated degradation process further demonstrate the enhanced durability of the Pt36Co/C electrode.The superior performance observed in this work can be attributed to the synergy between the ultrasmall size and homogeneous distribution of catalyst nanoparticles,bimetallic ligand and electronic effects,and the dissolution of unstable Co with the rearrangement of surface structure brought about by acid etching.Furthermore,the accessible raw materials and simplified operating procedures involved in the fabrication process would result in great cost-effectiveness for practical applications of PEMFCs.
文摘Highly efficient and stable bifunctional electrocatalysts that can be used for large-current-density electrolysis of alkaline seawater are highly desirable for carbon-neutral economies,but their facile and controllable synthesis remains a challenge.Here,self-assembled ultralow Ru,Ni-doped Fe_(2)O_(3) with a lily shaped morphology was synthesized on iron foam(RuNi-Fe_(2)O_(3)/IF)via a facile one-step hydrothermal process,in which the intact lily shaped RuNi-Fe_(2)O_(3)/IF was obtained by adjusting the ratio of Ru/Ni.Benefitting from the Ru/Ni chemical substitution,the as-synthesized RuNi-Fe_(2)O_(3)/IF can act as free-standing dual-function electrodes that are applied to electrocatalysis for the hydrogen evolution(HER)and oxygen evolution reactions(OER)in 1.0 mol L^(-1) KOH,requiring an overpotential of 75.0 mV to drive 100 mA cm^(-2) for HER and 329.0 mV for OER.Moreover,the overall water splitting catalyzed by RuNi-Fe_(2)O_(3)/IF only demands ultralow cell voltages of 1.66 and 1.73 V to drive 100 mA cm^(-2) in 1.0 mol L^(-1) KOH and 1.0 mol L^(-1) KOH seawater electrolytes,respectively.The electrodes show remarkable long-term durability,maintaining current densities exceeding 100 mA cm^(-2) for more than 100 h and thus outperforming the two-electrode system composed of noble catalysts.This work provides an efficient,economical method to synthesize self-standing bifunctional electrodes for large-current-density alkaline seawater electrolysis,which is of significant importance for ecological protection and energy exploitation.
