Study on the repairing effect of poly(N-vinylpyrrolidone-co-methacrylic acid)on permed or bleached damaged hair

The repairing effect of poly(N-vinylpyrrolidone-co-methacrylic acid)on permed or bleached damaged hair was studied.The combing and tensile strength of permed and bleached hair before and after treatment with the copolymer solution were tested,and the effects of the mass fraction of copolymer solution and immerseing time on the combing and tensile strength for permed or bleached damaged hair were investigated.The repair mechanism of permed or bleached damaged hair was also explored.The results show that when the immersing time is 3 hours,the tensile strength of the permed hair increases with the mass fraction of the copolymer solution Tensile strength within 0%-0.3%,but no obvious change is observed when250 Yield strength the mass fraction is over 0.3%.Therefore,the optimal mass 200 fraction of the copolymer solution for repairing the permed hair(cN/dtex)is 0.3%.Similarly,the optimal mass fraction of the copolymer 150strength/solution for repairing the bleached hair is 0.5%.Furthermore,the effects of immersing time on the tensile strength of the100Tensile damaged hair fibers were compared between the permed and90 bleached hair before and after treatment with the copolymer500.40.30.500.10.2 solution.Coincidentally,the optimal immersion time for permedw(P(NVP-co-MAA))/%or bleached damaged hair is both 2 hours.The tensile strength of the permed and bleached hair soaked in 0.3%and 0.5%copolymer solutions for 2 hours increases by 15.55%and 18.12%,respectively,compared to untreated hair.Through infrared spectroscopy analysis,it is found that the amide II band in hair fibers shifted to the blue after repair,with the wave number shift of 11.12 and 11.09 cm^(-1),which confirm the formation of hydrogen bonds in the hair samples.Additionally,the urea hydrogen bond disruption experiment demonstrates that urea does not disrupt the hydrogen bonds in untreated hair fibers,but prevents the formation of new hydrogen bonds in damaged hair fibers.It further validates that the improvement of the tensile strength of the copolymer treated damaged hair fibers is mainly due to the formation of hydrogen bonds.After treatment with the copolymer,the dry and wet combing friction decrease by 30.73%and 28.55%for the permed hair,and decrease by 28.55%and 24.83%for the bleached hairs,respectively.The scanning electron microscope shows that the copolymer can flatten the cuticle and fill the space between the raised cuticles.

Versatile bifunctional nitrogen-doped porous carbon derived from biomass in catalytic reduction of 4-nitrophenol and oxidation of styrene

The scarcity and weak durability of metal,especially precious metal catalysts are big obstacles for their large-scale application in many reactions.The state-of-the-art of the catalytic science prefers such type of catalysts,which can replace metal-based catalysts to alleviate energy and environmental crises and exhibit catalytic performance comparable to or even exceeding these metal catalysts.Herein,we report that N-doped porous carbon(NKC)derived from cheap and abundant radish can be employed as versatile and efficient bifunctional catalysts in both the catalytic reduction of 4-nitrophenol(NRR)and oxidation of styrene(SOR).The series of NKC catalysts were prepared with a simple and facile one-pot strategy by coupling the N-doping,carbonization and KOH activation processes.These catalysts show hierarchical porosity,with the specific surface area,total pore volume and N-doping content ranging from 918.9-3062.7 m^2 g^-1,1.01-2.04 cm^3 g^-1 and 1.29-15.3 at%,respectively.Interestingly,our finding suggests that the catalytic performance is not directly related to these parameters but correlates positively with the content of graphitic N dopants,which is the dominant contributor for impelling both the NRR and SOR.Another intriguing finding is that for both reactions,the optimal catalyst was found to be the NKC-3-800 which possesses the highest graphitic N content of 3.13 at%.In addition,to gain insight into the catalytic behavior,analyses of kinetics and thermodynamics were performed,and the catalytic mechanisms were postulated.This work paves the way for the construction of biomass-derived N-doped carbon catalysts for bi-or even multi-functional applications in various organic reactions.

Controllable photochemical synthesis of amorphous Ni(OH)2 as hydrogen production cocatalyst using inorganic phosphorous acid as sacrificial agent

Loading of cocatalysts can effectively inhibit the recombination of photogenerated carriers in photocatalysts and greatly improve the photocatalytic hydrogen production rate. Cocatalysts can be deposited at the outlet points of electrons using a photochemical method, which is beneficial for the following photocatalytic hydrogen production reaction. H2PO2^– has been used in the photochemical reduction of transition metals because of its special properties. However, the particles formed in the presence of H2PO2^– are very large and highly crystalline, which may inhibit the activity of photocatalysts. In this study, we designed a new method for synthesizing photocatalysts by photodeposition using some other phosphates, aiming to prepare controllable weakly crystalline and small-size cocatalysts to improve the hydrogen production activity. The cocatalyst prepared using H2PO3^– as an inorganic sacrificial agent has an amorphous structure and an average size of about 10 nm. The optimal photocatalytic hydrogen production rate of the obtained Ni(OH)2/g-C3N4(4.36 wt%) is 13707.86 μmol·g^-1·h^-1, which is even higher than the activity of Pt-4.36 wt%/g-C3N4(11210.93 μmol·g^-1·h^-1). Mechanistic studies show that loading of Ni(OH)2 can efficiently accelerate the separation and transfer efficiency of photogenerated charge carriers.

Photodeposition of earth‐abundant cocatalysts in photocatalytic water splitting:Methods,functions,and mechanisms

Photocatalytic water splitting based on semiconductor photocatalysts is a promising approach for producing carbon‐neutral,sustainable,and clean H_(2) fuel.Cocatalyst loading,which is an appealing strategy,has been extensively employed to improve the photocatalytic efficiency semiconductors.In view of the high cost and rare preservation of noble metal cocatalysts that significantly hinder their utilization for large‐scale energy production,various cocatalysts comprising earth‐abundant ele‐ments have been developed as noble‐metal‐free candidates using different methods to boost pho‐tocatalytic water splitting.Among these preparation strategies,photodeposition has attracted tre‐mendous attention in the deposition of earth‐abundant cocatalysts owing to its simplicity and mod‐erate availability,improved interfacial charge separation and transfer,and abundant active sites on the surface.In this review,we first summarize the deposition principles,deposition advantages,categories of cocatalysts,roles of cocatalysts,influencing factors,modification strategies,and design considerations in the photodeposition of earth‐abundant cocatalysts.The photodeposited earth‐abundant cocatalysts for the photocatalytic H_(2) evolution half reaction,photocatalytic O_(2) evo‐lution half reaction,and overall photocatalytic water splitting are discussed.Finally,some perspec‐tives on the challenges and possible future directions for the photodeposition of earth‐abundant cocatalysts in photocatalytic water splitting are presented.

Monodisperse Ni-clusters anchored on carbon nitride for efficient photocatalytic hydrogen evolution

The active sites of monodisperse transition metal Ni-clusters were anchored on carbon nitride(CN)by an in situ photoreduction deposition method to promote the efficient separation of photogenerated charges and achieve high-efficiency photocatalytic activity for hydrogen evolution.The Ni-cluster/CN exhibited a photocatalytic hydrogen production rate of 16.5 mmol·h^(-1)·g^(-1) and a total turnover frequency(TOF(H_(2)))value of 461.14 h^(-1).X-ray absorption spectroscopy based on synchrotron radiation indicated that CN had two reaction centers to form stable interface interactions with monodispersed Ni-clusters,in which carbon can act as an electron acceptor,while nitrogen can act as an electron donor.Meanwhile,the hybrid electronic structure of the Ni-cluster/CN system was constructed,which was favorable for photocatalytic activity for hydrogen production.An in-depth understanding of the interfacial interaction between CN and Ni-clusters will have important reference significance on the mechanistic study of development based on the cocatalyst.